Skip to contentSkip to conversation

Add remoteproc support for J784S4 SoCs

PATCH In review Beleswar Padhi 2 participants 4 messages May 22, 2024 – Jun 7, 2024

lore
Share & tools
lore
#0 lore raw

cover Add remoteproc support for J784S4 SoCs

Hello All,

This series adds remoteproc support for TI's J784S4 SoCs. The K3 J784S4 SoCs have four dual-core R5F subsystems and four C71x DSP subsystems. Enable the remoteproc drivers in defconfig and set the rproc firmware names to add remoteproc support.

Note: No driver changes are required as J784S4 SoCs have the same data as J721S2 SoCs. Thus, utilize the existing compatible string for driver probe.

Beleswar Padhi (2):
configs: j784s4_evm_a72_defconfig: Enable remoteproc drivers
board: ti: j784s4: j784s4.env: Set remoteproc firmware names

 board/ti/j784s4/j784s4.env       | 6 ++++++
 configs/j784s4_evm_a72_defconfig | 3 +++
 2 files changed, 9 insertions(+)
Signature · 1 line
2.34.1
#1 lore raw

PATCH 1/2 configs: j784s4_evm_a72_defconfig: Enable remoteproc drivers

The K3 J784S4 SoC has four dual-core R5F subsystems and four C71x DSP subsystems. Set config values to enable the remoteproc functionality with these R5F and DSP subsystems.

---
 configs/j784s4_evm_a72_defconfig | 3 +++
 1 file changed, 3 insertions(+)
configs/j784s4_evm_a72_defconfig +3 -0
index bb9603bef0f..158d064c19c 100644
@@ -59,6 +59,7 @@ CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_MTD=y
+CONFIG_CMD_REMOTEPROC=y
 CONFIG_CMD_TIME=y
 CONFIG_CMD_EXT4_WRITE=y
 CONFIG_OF_CONTROL=y
@@ -134,6 +135,8 @@ CONFIG_DM_REGULATOR_FIXED=y
 CONFIG_DM_REGULATOR_GPIO=y
 CONFIG_RAM=y
 CONFIG_SPL_RAM=y
+CONFIG_REMOTEPROC_TI_K3_DSP=y
+CONFIG_REMOTEPROC_TI_K3_R5F=y
 CONFIG_RESET_TI_SCI=y
 CONFIG_SCSI=y
 CONFIG_DM_SERIAL=y
Signature · 1 line
2.34.1
#2 lore raw

PATCH 2/2 board: ti: j784s4: j784s4.env: Set remoteproc firmware names

In reply to Beleswar Padhi

Include k3_rproc.env to access rproc boot commands and specify rproc firmware names for adding remoteproc support in J784S4 SoCs.

---
 board/ti/j784s4/j784s4.env | 6 ++++++
 1 file changed, 6 insertions(+)
board/ti/j784s4/j784s4.env +6 -0
index 7e54ca042ef..f5b72c7505e 100644
@@ -3,6 +3,10 @@
 #include <env/ti/ufs.env>
 #include <env/ti/k3_dfu.env>
 
+#if CONFIG_CMD_REMOTEPROC
+#include <env/ti/k3_rproc.env>
+#endif
+
 name_kern=Image
 console=ttyS2,115200n8
 args_all=setenv optargs ${optargs} earlycon=ns16550a,mmio32,0x02880000
@@ -15,3 +19,5 @@ mmcdev=1
 bootpart=1:2
 bootdir=/boot
 rd_spec=-
+
+rproc_fw_binaries= 2 /lib/firmware/j784s4-main-r5f0_0-fw 3 /lib/firmware/j784s4-main-r5f0_1-fw 4 /lib/firmware/j784s4-main-r5f1_0-fw 5 /lib/firmware/j784s4-main-r5f1_1-fw 6 /lib/firmware/j784s4-main-r5f2_0-fw 7 /lib/firmware/j784s4-main-r5f2_1-fw 8 /lib/firmware/j784s4-c71_0-fw 9 /lib/firmware/j784s4-c71_1-fw 10 /lib/firmware/j784s4-c71_2-fw 11 /lib/firmware/j784s4-c71_3-fw
Signature · 1 line
2.34.1
#3 lore raw
In reply to Beleswar Padhi
Quoted 10 lines · Beleswar Padhi

This series adds remoteproc support for TI's J784S4 SoCs. The K3 J784S4 SoCs have four dual-core R5F subsystems and four C71x DSP subsystems. Enable the remoteproc drivers in defconfig and set the rproc firmware names to add remoteproc support.

Note: No driver changes are required as J784S4 SoCs have the same data as J721S2 SoCs. Thus, utilize the existing compatible string for driver probe.

[...]

Applied to u-boot/next, thanks!

Signature · 1 line
Tom