add ArmSoM Sige7 Rk3588 board
Subsystems (3)
v4 cover add ArmSoM Sige7 Rk3588 board
This series also introduces dts commits of rk3588s.dtsi and rk3588.dtsi from v6.10-rc1-dts.
Then dts of ArmSoM Sige7 is picked from upstream.
I also remove obsolete usb3 nodes of rk3588-u-boot.dtsi and rk3588-u-boot.dtsi.
Changes in v4:
- Pick all commits of rk3588s.dtsi and rk3588.dtsi from v6.10-rc1-dts
- Remove obsolete USB3 DRD nodes in u-boot.dtsi of rk3588s/rk3588
- Remove sdhci and usb nodes from rk3588-armsom-sige7-u-boot.dtsi
Changes in v3:
- Use update-dts-subtree.sh to pick upstream dts
Changes in v2:
- Fix alphabetical order of MAINTAINERS
- Use arch/arm/dts/rk3588-armsom-sige7* in board MAINTAINERS
- Remove spi flash related config
- Move kernel dts to dts/upstream/src/arm64/rockchip/
Boris Brezillon (1):
arm64: dts: rockchip: Add rk3588 GPU node
Diederik de Haas (1):
arm64: dts: rockchip: Fix ordering of nodes on rk3588s
Jianfeng Liu (3):
arm64: dts: rockchip: Add ArmSom Sige7 board
rockchip: rk3588: Remove USB3 DRD nodes in u-boot.dtsi
board: rockchip: add ArmSoM Sige7 Rk3588 board
Niklas Cassel (1):
arm64: dts: rockchip: add rk3588 pcie and php IOMMUs
Sebastian Reichel (4):
arm64: dts: rockchip: fix usb2phy nodename for rk3588
arm64: dts: rockchip: reorder usb2phy properties for rk3588
arm64: dts: rockchip: add USBDP phys on rk3588
arm64: dts: rockchip: add USB3 DRD controllers on rk3588
MAINTAINERS | 1 + arch/arm/dts/rk3588-armsom-sige7-u-boot.dtsi | 6 + arch/arm/dts/rk3588-u-boot.dtsi | 74 -- arch/arm/dts/rk3588s-u-boot.dtsi | 85 --- arch/arm/mach-rockchip/rk3588/Kconfig | 26 + board/armsom/sige7-rk3588/Kconfig | 12 + board/armsom/sige7-rk3588/MAINTAINERS | 7 + configs/sige7-rk3588_defconfig | 93 +++ doc/board/rockchip/rockchip.rst | 1 + .../arm64/rockchip/rk3588-armsom-sige7.dts | 721 ++++++++++++++++++ dts/upstream/src/arm64/rockchip/rk3588.dtsi | 72 ++ dts/upstream/src/arm64/rockchip/rk3588s.dtsi | 377 ++++++--- include/configs/sige7-rk3588.h | 15 + 13 files changed, 1225 insertions(+), 265 deletions(-) create mode 100644 arch/arm/dts/rk3588-armsom-sige7-u-boot.dtsi create mode 100644 board/armsom/sige7-rk3588/Kconfig create mode 100644 board/armsom/sige7-rk3588/MAINTAINERS create mode 100644 configs/sige7-rk3588_defconfig create mode 100644 dts/upstream/src/arm64/rockchip/rk3588-armsom-sige7.dts create mode 100644 include/configs/sige7-rk3588.h
Signature · 1 line
2.34.1
PATCH v4 1/10 arm64: dts: rockchip: Add rk3588 GPU node
From: Boris Brezillon <[email protected]>
Add Mali GPU Node to the RK3588 SoC DT including GPU clock operating points
[ upstream commit: 6fca4edb93d335f29f81e484936f38a5eed6a9b1 ]
---
(no changes since v1)
dts/upstream/src/arm64/rockchip/rk3588s.dtsi | 56 ++++++++++++++++++++ 1 file changed, 56 insertions(+)
dts/upstream/src/arm64/rockchip/rk3588s.dtsi +56 -0
@@ -501,6 +501,62 @@ status = "disabled"; }; + gpu: gpu@fb000000 { + compatible = "rockchip,rk3588-mali", "arm,mali-valhall-csf"; + reg = <0x0 0xfb000000 0x0 0x200000>; + #cooling-cells = <2>; + assigned-clocks = <&scmi_clk SCMI_CLK_GPU>; + assigned-clock-rates = <200000000>; + clocks = <&cru CLK_GPU>, <&cru CLK_GPU_COREGROUP>, + <&cru CLK_GPU_STACKS>; + clock-names = "core", "coregroup", "stacks"; + dynamic-power-coefficient = <2982>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "job", "mmu", "gpu"; + operating-points-v2 = <&gpu_opp_table>; + power-domains = <&power RK3588_PD_GPU>; + status = "disabled"; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <675000 675000 850000>; + }; + opp-400000000 { + opp-hz = /bits/ 64 <400000000>; + opp-microvolt = <675000 675000 850000>; + }; + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <675000 675000 850000>; + }; + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <675000 675000 850000>; + }; + opp-700000000 { + opp-hz = /bits/ 64 <700000000>; + opp-microvolt = <700000 700000 850000>; + }; + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <750000 750000 850000>; + }; + opp-900000000 { + opp-hz = /bits/ 64 <900000000>; + opp-microvolt = <800000 800000 850000>; + }; + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <850000 850000 850000>; + }; + }; + }; + pmu1grf: syscon@fd58a000 { compatible = "rockchip,rk3588-pmugrf", "syscon", "simple-mfd"; reg = <0x0 0xfd58a000 0x0 0x10000>;
Signature · 1 line
2.34.1
Re: [PATCH v4 01/10] arm64: dts: rockchip: Add rk3588 GPU node
Quoted 10 lines · Jianfeng Liu
From: Boris Brezillon <[email protected]>
Add Mali GPU Node to the RK3588 SoC DT including GPU clock operating points
Signed-off-by Boris Brezillon <[email protected]>Signed-off-by Sebastian Reichel <[email protected]>Signed-off-by Heiko Stuebner <[email protected]>
Quoted 4 lines
[ upstream commit:
6fca4edb93d335f29f81e484936f38a5eed6a9b1](cherry picked from commit 3cd15354ea0c8668812bc0b3a4136606c10803e9)Signed-off-by Jianfeng Liu <[email protected]>
Thanks,
- Kever
Quoted 74 lines
---
(no changes since v1)
dts/upstream/src/arm64/rockchip/rk3588s.dtsi | 56 ++++++++++++++++++++ 1 file changed, 56 insertions(+)dts/upstream/src/arm64/rockchip/rk3588s.dtsi +56
-0@@ -501,6 +501,62 @@ status = "disabled"; }; + gpu: gpu@fb000000 { + compatible = "rockchip,rk3588-mali", "arm,mali-valhall-csf"; + reg = <0x0 0xfb000000 0x0 0x200000>; + #cooling-cells = <2>; + assigned-clocks = <&scmi_clk SCMI_CLK_GPU>; + assigned-clock-rates = <200000000>; + clocks = <&cru CLK_GPU>, <&cru CLK_GPU_COREGROUP>, + <&cru CLK_GPU_STACKS>; + clock-names = "core", "coregroup", "stacks"; + dynamic-power-coefficient = <2982>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "job", "mmu", "gpu"; + operating-points-v2 = <&gpu_opp_table>; + power-domains = <&power RK3588_PD_GPU>; + status = "disabled"; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <675000 675000 850000>; + }; + opp-400000000 { + opp-hz = /bits/ 64 <400000000>; + opp-microvolt = <675000 675000 850000>; + }; + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <675000 675000 850000>; + }; + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <675000 675000 850000>; + }; + opp-700000000 { + opp-hz = /bits/ 64 <700000000>; + opp-microvolt = <700000 700000 850000>; + }; + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <750000 750000 850000>; + }; + opp-900000000 { + opp-hz = /bits/ 64 <900000000>; + opp-microvolt = <800000 800000 850000>; + }; + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <850000 850000 850000>; + }; + }; + }; + pmu1grf: syscon@fd58a000 { compatible = "rockchip,rk3588-pmugrf", "syscon", "simple-mfd"; reg = <0x0 0xfd58a000 0x0 0x10000>;
PATCH v4 2/10 arm64: dts: rockchip: Fix ordering of nodes on rk3588s
In reply to Jianfeng LiuFrom: Diederik de Haas <[email protected]>
Fix the ordering of the main nodes by sorting them alphabetically and then the ones with a memory address sequentially by that address.
[ upstream commit: cbb97fe18e299ece1c0074924c630de6a19b320f ]
---
(no changes since v1)
dts/upstream/src/arm64/rockchip/rk3588s.dtsi | 304 +++++++++---------- 1 file changed, 152 insertions(+), 152 deletions(-)
dts/upstream/src/arm64/rockchip/rk3588s.dtsi +152 -152
@@ -347,6 +347,11 @@ }; }; + display_subsystem: display-subsystem { + compatible = "rockchip,display-subsystem"; + ports = <&vop_out>; + }; + firmware { optee: optee { compatible = "linaro,optee-tz";
@@ -394,11 +399,6 @@ #clock-cells = <0>; }; - display_subsystem: display-subsystem { - compatible = "rockchip,display-subsystem"; - ports = <&vop_out>; - }; - timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH 0>,
@@ -436,6 +436,62 @@ }; }; + gpu: gpu@fb000000 { + compatible = "rockchip,rk3588-mali", "arm,mali-valhall-csf"; + reg = <0x0 0xfb000000 0x0 0x200000>; + #cooling-cells = <2>; + assigned-clocks = <&scmi_clk SCMI_CLK_GPU>; + assigned-clock-rates = <200000000>; + clocks = <&cru CLK_GPU>, <&cru CLK_GPU_COREGROUP>, + <&cru CLK_GPU_STACKS>; + clock-names = "core", "coregroup", "stacks"; + dynamic-power-coefficient = <2982>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "job", "mmu", "gpu"; + operating-points-v2 = <&gpu_opp_table>; + power-domains = <&power RK3588_PD_GPU>; + status = "disabled"; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <675000 675000 850000>; + }; + opp-400000000 { + opp-hz = /bits/ 64 <400000000>; + opp-microvolt = <675000 675000 850000>; + }; + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <675000 675000 850000>; + }; + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <675000 675000 850000>; + }; + opp-700000000 { + opp-hz = /bits/ 64 <700000000>; + opp-microvolt = <700000 700000 850000>; + }; + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <750000 750000 850000>; + }; + opp-900000000 { + opp-hz = /bits/ 64 <900000000>; + opp-microvolt = <800000 800000 850000>; + }; + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <850000 850000 850000>; + }; + }; + }; + usb_host0_ehci: usb@fc800000 { compatible = "rockchip,rk3588-ehci", "generic-ehci"; reg = <0x0 0xfc800000 0x0 0x40000>;
@@ -501,62 +557,6 @@ status = "disabled"; }; - gpu: gpu@fb000000 { - compatible = "rockchip,rk3588-mali", "arm,mali-valhall-csf"; - reg = <0x0 0xfb000000 0x0 0x200000>; - #cooling-cells = <2>; - assigned-clocks = <&scmi_clk SCMI_CLK_GPU>; - assigned-clock-rates = <200000000>; - clocks = <&cru CLK_GPU>, <&cru CLK_GPU_COREGROUP>, - <&cru CLK_GPU_STACKS>; - clock-names = "core", "coregroup", "stacks"; - dynamic-power-coefficient = <2982>; - interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH 0>, - <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH 0>, - <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH 0>; - interrupt-names = "job", "mmu", "gpu"; - operating-points-v2 = <&gpu_opp_table>; - power-domains = <&power RK3588_PD_GPU>; - status = "disabled"; - - gpu_opp_table: opp-table { - compatible = "operating-points-v2"; - - opp-300000000 { - opp-hz = /bits/ 64 <300000000>; - opp-microvolt = <675000 675000 850000>; - }; - opp-400000000 { - opp-hz = /bits/ 64 <400000000>; - opp-microvolt = <675000 675000 850000>; - }; - opp-500000000 { - opp-hz = /bits/ 64 <500000000>; - opp-microvolt = <675000 675000 850000>; - }; - opp-600000000 { - opp-hz = /bits/ 64 <600000000>; - opp-microvolt = <675000 675000 850000>; - }; - opp-700000000 { - opp-hz = /bits/ 64 <700000000>; - opp-microvolt = <700000 700000 850000>; - }; - opp-800000000 { - opp-hz = /bits/ 64 <800000000>; - opp-microvolt = <750000 750000 850000>; - }; - opp-900000000 { - opp-hz = /bits/ 64 <900000000>; - opp-microvolt = <800000 800000 850000>; - }; - opp-1000000000 { - opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <850000 850000 850000>; - }; - }; - }; - pmu1grf: syscon@fd58a000 { compatible = "rockchip,rk3588-pmugrf", "syscon", "simple-mfd"; reg = <0x0 0xfd58a000 0x0 0x10000>;
@@ -702,74 +702,6 @@ status = "disabled"; }; - vop: vop@fdd90000 { - compatible = "rockchip,rk3588-vop"; - reg = <0x0 0xfdd90000 0x0 0x4200>, <0x0 0xfdd95000 0x0 0x1000>; - reg-names = "vop", "gamma-lut"; - interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru ACLK_VOP>, - <&cru HCLK_VOP>, - <&cru DCLK_VOP0>, - <&cru DCLK_VOP1>, - <&cru DCLK_VOP2>, - <&cru DCLK_VOP3>, - <&cru PCLK_VOP_ROOT>; - clock-names = "aclk", - "hclk", - "dclk_vp0", - "dclk_vp1", - "dclk_vp2", - "dclk_vp3", - "pclk_vop"; - iommus = <&vop_mmu>; - power-domains = <&power RK3588_PD_VOP>; - rockchip,grf = <&sys_grf>; - rockchip,vop-grf = <&vop_grf>; - rockchip,vo1-grf = <&vo1_grf>; - rockchip,pmu = <&pmu>; - status = "disabled"; - - vop_out: ports { - #address-cells = <1>; - #size-cells = <0>; - - vp0: port@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - }; - - vp1: port@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - }; - - vp2: port@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2>; - }; - - vp3: port@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - }; - }; - }; - - vop_mmu: iommu@fdd97e00 { - compatible = "rockchip,rk3588-iommu", "rockchip,rk3568-iommu"; - reg = <0x0 0xfdd97e00 0x0 0x100>, <0x0 0xfdd97f00 0x0 0x100>; - interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>; - clock-names = "aclk", "iface"; - #iommu-cells = <0>; - power-domains = <&power RK3588_PD_VOP>; - status = "disabled"; - }; - uart0: serial@fd890000 { compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart"; reg = <0x0 0xfd890000 0x0 0x100>;
@@ -1140,6 +1072,87 @@ }; }; + av1d: video-codec@fdc70000 { + compatible = "rockchip,rk3588-av1-vpu"; + reg = <0x0 0xfdc70000 0x0 0x800>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "vdpu"; + assigned-clocks = <&cru ACLK_AV1>, <&cru PCLK_AV1>; + assigned-clock-rates = <400000000>, <400000000>; + clocks = <&cru ACLK_AV1>, <&cru PCLK_AV1>; + clock-names = "aclk", "hclk"; + power-domains = <&power RK3588_PD_AV1>; + resets = <&cru SRST_A_AV1>, <&cru SRST_P_AV1>, <&cru SRST_A_AV1_BIU>, <&cru SRST_P_AV1_BIU>; + }; + + vop: vop@fdd90000 { + compatible = "rockchip,rk3588-vop"; + reg = <0x0 0xfdd90000 0x0 0x4200>, <0x0 0xfdd95000 0x0 0x1000>; + reg-names = "vop", "gamma-lut"; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru ACLK_VOP>, + <&cru HCLK_VOP>, + <&cru DCLK_VOP0>, + <&cru DCLK_VOP1>, + <&cru DCLK_VOP2>, + <&cru DCLK_VOP3>, + <&cru PCLK_VOP_ROOT>; + clock-names = "aclk", + "hclk", + "dclk_vp0", + "dclk_vp1", + "dclk_vp2", + "dclk_vp3", + "pclk_vop"; + iommus = <&vop_mmu>; + power-domains = <&power RK3588_PD_VOP>; + rockchip,grf = <&sys_grf>; + rockchip,vop-grf = <&vop_grf>; + rockchip,vo1-grf = <&vo1_grf>; + rockchip,pmu = <&pmu>; + status = "disabled"; + + vop_out: ports { + #address-cells = <1>; + #size-cells = <0>; + + vp0: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + vp1: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + vp2: port@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + vp3: port@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; + }; + + vop_mmu: iommu@fdd97e00 { + compatible = "rockchip,rk3588-iommu", "rockchip,rk3568-iommu"; + reg = <0x0 0xfdd97e00 0x0 0x100>, <0x0 0xfdd97f00 0x0 0x100>; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>; + clock-names = "aclk", "iface"; + #iommu-cells = <0>; + power-domains = <&power RK3588_PD_VOP>; + status = "disabled"; + }; + i2s4_8ch: i2s@fddc0000 { compatible = "rockchip,rk3588-i2s-tdm"; reg = <0x0 0xfddc0000 0x0 0x1000>;
@@ -1431,6 +1444,16 @@ reg = <0x0 0xfdf82200 0x0 0x20>; }; + dfi: dfi@fe060000 { + reg = <0x00 0xfe060000 0x00 0x10000>; + compatible = "rockchip,rk3588-dfi"; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH 0>; + rockchip,pmu = <&pmu1grf>; + }; + pcie2x1l1: pcie@fe180000 { compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie"; bus-range = <0x30 0x3f>;
@@ -1533,16 +1556,6 @@ }; }; - dfi: dfi@fe060000 { - reg = <0x00 0xfe060000 0x00 0x10000>; - compatible = "rockchip,rk3588-dfi"; - interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH 0>, - <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH 0>, - <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH 0>, - <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH 0>; - rockchip,pmu = <&pmu1grf>; - }; - gmac1: ethernet@fe1c0000 { compatible = "rockchip,rk3588-gmac", "snps,dwmac-4.20a"; reg = <0x0 0xfe1c0000 0x0 0x10000>;
@@ -2543,19 +2556,6 @@ #interrupt-cells = <2>; }; }; - - av1d: video-codec@fdc70000 { - compatible = "rockchip,rk3588-av1-vpu"; - reg = <0x0 0xfdc70000 0x0 0x800>; - interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH 0>; - interrupt-names = "vdpu"; - assigned-clocks = <&cru ACLK_AV1>, <&cru PCLK_AV1>; - assigned-clock-rates = <400000000>, <400000000>; - clocks = <&cru ACLK_AV1>, <&cru PCLK_AV1>; - clock-names = "aclk", "hclk"; - power-domains = <&power RK3588_PD_AV1>; - resets = <&cru SRST_A_AV1>, <&cru SRST_P_AV1>, <&cru SRST_A_AV1_BIU>, <&cru SRST_P_AV1_BIU>; - }; }; #include "rk3588s-pinctrl.dtsi"
Signature · 1 line
2.34.1
Re: [PATCH v4 02/10] arm64: dts: rockchip: Fix ordering of nodes on rk3588s
Quoted 5 lines · Jianfeng Liu
From: Diederik de Haas <[email protected]>
Fix the ordering of the main nodes by sorting them alphabetically and then the ones with a memory address sequentially by that address.
Quoted 8 lines
Signed-off-by Diederik de Haas <[email protected]>Signed-off-by Heiko Stuebner <[email protected]>[ upstream commit:
cbb97fe18e299ece1c0074924c630de6a19b320f](cherry picked from commit bbf7c16f2f1208b96349f6f6648b69cfaa1a482b)Signed-off-by Jianfeng Liu <[email protected]>
Thanks,
- Kever
Quoted 378 lines
---
(no changes since v1)
dts/upstream/src/arm64/rockchip/rk3588s.dtsi | 304 +++++++++---------- 1 file changed, 152 insertions(+), 152 deletions(-)dts/upstream/src/arm64/rockchip/rk3588s.dtsi +152
-152@@ -347,6 +347,11 @@ }; }; + display_subsystem: display-subsystem { + compatible = "rockchip,display-subsystem"; + ports = <&vop_out>; + }; + firmware { optee: optee { compatible = "linaro,optee-tz";@@ -394,11 +399,6 @@ #clock-cells = <0>; }; - display_subsystem: display-subsystem { - compatible = "rockchip,display-subsystem"; - ports = <&vop_out>; - }; - timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH 0>,@@ -436,6 +436,62 @@ }; }; + gpu: gpu@fb000000 { + compatible = "rockchip,rk3588-mali", "arm,mali-valhall-csf"; + reg = <0x0 0xfb000000 0x0 0x200000>; + #cooling-cells = <2>; + assigned-clocks = <&scmi_clk SCMI_CLK_GPU>; + assigned-clock-rates = <200000000>; + clocks = <&cru CLK_GPU>, <&cru CLK_GPU_COREGROUP>, + <&cru CLK_GPU_STACKS>; + clock-names = "core", "coregroup", "stacks"; + dynamic-power-coefficient = <2982>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "job", "mmu", "gpu"; + operating-points-v2 = <&gpu_opp_table>; + power-domains = <&power RK3588_PD_GPU>; + status = "disabled"; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <675000 675000 850000>; + }; + opp-400000000 { + opp-hz = /bits/ 64 <400000000>; + opp-microvolt = <675000 675000 850000>; + }; + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <675000 675000 850000>; + }; + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <675000 675000 850000>; + }; + opp-700000000 { + opp-hz = /bits/ 64 <700000000>; + opp-microvolt = <700000 700000 850000>; + }; + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <750000 750000 850000>; + }; + opp-900000000 { + opp-hz = /bits/ 64 <900000000>; + opp-microvolt = <800000 800000 850000>; + }; + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <850000 850000 850000>; + }; + }; + }; + usb_host0_ehci: usb@fc800000 { compatible = "rockchip,rk3588-ehci", "generic-ehci"; reg = <0x0 0xfc800000 0x0 0x40000>;@@ -501,62 +557,6 @@ status = "disabled"; }; - gpu: gpu@fb000000 { - compatible = "rockchip,rk3588-mali", "arm,mali-valhall-csf"; - reg = <0x0 0xfb000000 0x0 0x200000>; - #cooling-cells = <2>; - assigned-clocks = <&scmi_clk SCMI_CLK_GPU>; - assigned-clock-rates = <200000000>; - clocks = <&cru CLK_GPU>, <&cru CLK_GPU_COREGROUP>, - <&cru CLK_GPU_STACKS>; - clock-names = "core", "coregroup", "stacks"; - dynamic-power-coefficient = <2982>; - interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH 0>, - <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH 0>, - <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH 0>; - interrupt-names = "job", "mmu", "gpu"; - operating-points-v2 = <&gpu_opp_table>; - power-domains = <&power RK3588_PD_GPU>; - status = "disabled"; - - gpu_opp_table: opp-table { - compatible = "operating-points-v2"; - - opp-300000000 { - opp-hz = /bits/ 64 <300000000>; - opp-microvolt = <675000 675000 850000>; - }; - opp-400000000 { - opp-hz = /bits/ 64 <400000000>; - opp-microvolt = <675000 675000 850000>; - }; - opp-500000000 { - opp-hz = /bits/ 64 <500000000>; - opp-microvolt = <675000 675000 850000>; - }; - opp-600000000 { - opp-hz = /bits/ 64 <600000000>; - opp-microvolt = <675000 675000 850000>; - }; - opp-700000000 { - opp-hz = /bits/ 64 <700000000>; - opp-microvolt = <700000 700000 850000>; - }; - opp-800000000 { - opp-hz = /bits/ 64 <800000000>; - opp-microvolt = <750000 750000 850000>; - }; - opp-900000000 { - opp-hz = /bits/ 64 <900000000>; - opp-microvolt = <800000 800000 850000>; - }; - opp-1000000000 { - opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <850000 850000 850000>; - }; - }; - }; - pmu1grf: syscon@fd58a000 { compatible = "rockchip,rk3588-pmugrf", "syscon", "simple-mfd"; reg = <0x0 0xfd58a000 0x0 0x10000>;@@ -702,74 +702,6 @@ status = "disabled"; }; - vop: vop@fdd90000 { - compatible = "rockchip,rk3588-vop"; - reg = <0x0 0xfdd90000 0x0 0x4200>, <0x0 0xfdd95000 0x0 0x1000>; - reg-names = "vop", "gamma-lut"; - interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru ACLK_VOP>, - <&cru HCLK_VOP>, - <&cru DCLK_VOP0>, - <&cru DCLK_VOP1>, - <&cru DCLK_VOP2>, - <&cru DCLK_VOP3>, - <&cru PCLK_VOP_ROOT>; - clock-names = "aclk", - "hclk", - "dclk_vp0", - "dclk_vp1", - "dclk_vp2", - "dclk_vp3", - "pclk_vop"; - iommus = <&vop_mmu>; - power-domains = <&power RK3588_PD_VOP>; - rockchip,grf = <&sys_grf>; - rockchip,vop-grf = <&vop_grf>; - rockchip,vo1-grf = <&vo1_grf>; - rockchip,pmu = <&pmu>; - status = "disabled"; - - vop_out: ports { - #address-cells = <1>; - #size-cells = <0>; - - vp0: port@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - }; - - vp1: port@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - }; - - vp2: port@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2>; - }; - - vp3: port@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - }; - }; - }; - - vop_mmu: iommu@fdd97e00 { - compatible = "rockchip,rk3588-iommu", "rockchip,rk3568-iommu"; - reg = <0x0 0xfdd97e00 0x0 0x100>, <0x0 0xfdd97f00 0x0 0x100>; - interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>; - clock-names = "aclk", "iface"; - #iommu-cells = <0>; - power-domains = <&power RK3588_PD_VOP>; - status = "disabled"; - }; - uart0: serial@fd890000 { compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart"; reg = <0x0 0xfd890000 0x0 0x100>;@@ -1140,6 +1072,87 @@ }; }; + av1d: video-codec@fdc70000 { + compatible = "rockchip,rk3588-av1-vpu"; + reg = <0x0 0xfdc70000 0x0 0x800>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "vdpu"; + assigned-clocks = <&cru ACLK_AV1>, <&cru PCLK_AV1>; + assigned-clock-rates = <400000000>, <400000000>; + clocks = <&cru ACLK_AV1>, <&cru PCLK_AV1>; + clock-names = "aclk", "hclk"; + power-domains = <&power RK3588_PD_AV1>; + resets = <&cru SRST_A_AV1>, <&cru SRST_P_AV1>, <&cru SRST_A_AV1_BIU>, <&cru SRST_P_AV1_BIU>; + }; + + vop: vop@fdd90000 { + compatible = "rockchip,rk3588-vop"; + reg = <0x0 0xfdd90000 0x0 0x4200>, <0x0 0xfdd95000 0x0 0x1000>; + reg-names = "vop", "gamma-lut"; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru ACLK_VOP>, + <&cru HCLK_VOP>, + <&cru DCLK_VOP0>, + <&cru DCLK_VOP1>, + <&cru DCLK_VOP2>, + <&cru DCLK_VOP3>, + <&cru PCLK_VOP_ROOT>; + clock-names = "aclk", + "hclk", + "dclk_vp0", + "dclk_vp1", + "dclk_vp2", + "dclk_vp3", + "pclk_vop"; + iommus = <&vop_mmu>; + power-domains = <&power RK3588_PD_VOP>; + rockchip,grf = <&sys_grf>; + rockchip,vop-grf = <&vop_grf>; + rockchip,vo1-grf = <&vo1_grf>; + rockchip,pmu = <&pmu>; + status = "disabled"; + + vop_out: ports { + #address-cells = <1>; + #size-cells = <0>; + + vp0: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + vp1: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + vp2: port@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + vp3: port@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; + }; + + vop_mmu: iommu@fdd97e00 { + compatible = "rockchip,rk3588-iommu", "rockchip,rk3568-iommu"; + reg = <0x0 0xfdd97e00 0x0 0x100>, <0x0 0xfdd97f00 0x0 0x100>; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>; + clock-names = "aclk", "iface"; + #iommu-cells = <0>; + power-domains = <&power RK3588_PD_VOP>; + status = "disabled"; + }; + i2s4_8ch: i2s@fddc0000 { compatible = "rockchip,rk3588-i2s-tdm"; reg = <0x0 0xfddc0000 0x0 0x1000>;@@ -1431,6 +1444,16 @@ reg = <0x0 0xfdf82200 0x0 0x20>; }; + dfi: dfi@fe060000 { + reg = <0x00 0xfe060000 0x00 0x10000>; + compatible = "rockchip,rk3588-dfi"; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH 0>; + rockchip,pmu = <&pmu1grf>; + }; + pcie2x1l1: pcie@fe180000 { compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie"; bus-range = <0x30 0x3f>;@@ -1533,16 +1556,6 @@ }; }; - dfi: dfi@fe060000 { - reg = <0x00 0xfe060000 0x00 0x10000>; - compatible = "rockchip,rk3588-dfi"; - interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH 0>, - <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH 0>, - <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH 0>, - <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH 0>; - rockchip,pmu = <&pmu1grf>; - }; - gmac1: ethernet@fe1c0000 { compatible = "rockchip,rk3588-gmac", "snps,dwmac-4.20a"; reg = <0x0 0xfe1c0000 0x0 0x10000>;@@ -2543,19 +2556,6 @@ #interrupt-cells = <2>; }; }; - - av1d: video-codec@fdc70000 { - compatible = "rockchip,rk3588-av1-vpu"; - reg = <0x0 0xfdc70000 0x0 0x800>; - interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH 0>; - interrupt-names = "vdpu"; - assigned-clocks = <&cru ACLK_AV1>, <&cru PCLK_AV1>; - assigned-clock-rates = <400000000>, <400000000>; - clocks = <&cru ACLK_AV1>, <&cru PCLK_AV1>; - clock-names = "aclk", "hclk"; - power-domains = <&power RK3588_PD_AV1>; - resets = <&cru SRST_A_AV1>, <&cru SRST_P_AV1>, <&cru SRST_A_AV1_BIU>, <&cru SRST_P_AV1_BIU>; - }; }; #include "rk3588s-pinctrl.dtsi"
PATCH v4 3/10 arm64: dts: rockchip: fix usb2phy nodename for rk3588
In reply to Jianfeng LiuFrom: Sebastian Reichel <[email protected]>
usb2-phy should be named usb2phy according to the DT binding, so let's fix it up accordingly.
[ upstream commit: 4e07a95f7402de092cd71b2cb96c69f85c98f251 ]
---
(no changes since v1)
dts/upstream/src/arm64/rockchip/rk3588s.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
dts/upstream/src/arm64/rockchip/rk3588s.dtsi +2 -2
@@ -599,7 +599,7 @@ #address-cells = <1>; #size-cells = <1>; - u2phy2: usb2-phy@8000 { + u2phy2: usb2phy@8000 { compatible = "rockchip,rk3588-usb2phy"; reg = <0x8000 0x10>; interrupts = <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -624,7 +624,7 @@ #address-cells = <1>; #size-cells = <1>; - u2phy3: usb2-phy@c000 { + u2phy3: usb2phy@c000 { compatible = "rockchip,rk3588-usb2phy"; reg = <0xc000 0x10>; interrupts = <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH 0>;
Signature · 1 line
2.34.1
Re: [PATCH v4 03/10] arm64: dts: rockchip: fix usb2phy nodename for rk3588
Quoted 5 lines · Jianfeng Liu
From: Sebastian Reichel <[email protected]>
usb2-phy should be named usb2phy according to the DT binding, so let's fix it up accordingly.
Quoted 8 lines
Signed-off-by Sebastian Reichel <[email protected]>Signed-off-by Heiko Stuebner <[email protected]>[ upstream commit:
4e07a95f7402de092cd71b2cb96c69f85c98f251](cherry picked from commit 5a3e4638492497ae81b9bd4a8627f4727e312ccc)Signed-off-by Jianfeng Liu <[email protected]>
Thanks,
- Kever
Quoted 29 lines
---
(no changes since v1)
dts/upstream/src/arm64/rockchip/rk3588s.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)dts/upstream/src/arm64/rockchip/rk3588s.dtsi +2
-2@@ -599,7 +599,7 @@ #address-cells = <1>; #size-cells = <1>; - u2phy2: usb2-phy@8000 { + u2phy2: usb2phy@8000 { compatible = "rockchip,rk3588-usb2phy"; reg = <0x8000 0x10>; interrupts = <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH 0>;@@ -624,7 +624,7 @@ #address-cells = <1>; #size-cells = <1>; - u2phy3: usb2-phy@c000 { + u2phy3: usb2phy@c000 { compatible = "rockchip,rk3588-usb2phy"; reg = <0xc000 0x10>; interrupts = <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH 0>;
PATCH v4 4/10 arm64: dts: rockchip: reorder usb2phy properties for rk3588
In reply to Jianfeng LiuFrom: Sebastian Reichel <[email protected]>
Reorder common DT properties alphabetically for usb2phy, according to latest DT style rules.
[ upstream commit: abe68e0ca71dddce0e5419e35507cb464d61870d ]
---
(no changes since v1)
dts/upstream/src/arm64/rockchip/rk3588s.dtsi | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)
dts/upstream/src/arm64/rockchip/rk3588s.dtsi +8 -8
@@ -602,13 +602,13 @@ u2phy2: usb2phy@8000 { compatible = "rockchip,rk3588-usb2phy"; reg = <0x8000 0x10>; - interrupts = <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH 0>; - resets = <&cru SRST_OTGPHY_U2_0>, <&cru SRST_P_USB2PHY_U2_0_GRF0>; - reset-names = "phy", "apb"; + #clock-cells = <0>; clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>; clock-names = "phyclk"; clock-output-names = "usb480m_phy2"; - #clock-cells = <0>; + interrupts = <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH 0>; + resets = <&cru SRST_OTGPHY_U2_0>, <&cru SRST_P_USB2PHY_U2_0_GRF0>; + reset-names = "phy", "apb"; status = "disabled"; u2phy2_host: host-port {
@@ -627,13 +627,13 @@ u2phy3: usb2phy@c000 { compatible = "rockchip,rk3588-usb2phy"; reg = <0xc000 0x10>; - interrupts = <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH 0>; - resets = <&cru SRST_OTGPHY_U2_1>, <&cru SRST_P_USB2PHY_U2_1_GRF0>; - reset-names = "phy", "apb"; + #clock-cells = <0>; clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>; clock-names = "phyclk"; clock-output-names = "usb480m_phy3"; - #clock-cells = <0>; + interrupts = <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH 0>; + resets = <&cru SRST_OTGPHY_U2_1>, <&cru SRST_P_USB2PHY_U2_1_GRF0>; + reset-names = "phy", "apb"; status = "disabled"; u2phy3_host: host-port {
Signature · 1 line
2.34.1
Re: [PATCH v4 04/10] arm64: dts: rockchip: reorder usb2phy properties for rk3588
Quoted 5 lines · Jianfeng Liu
From: Sebastian Reichel <[email protected]>
Reorder common DT properties alphabetically for usb2phy, according to latest DT style rules.
Quoted 8 lines
Signed-off-by Sebastian Reichel <[email protected]>Signed-off-by Heiko Stuebner <[email protected]>[ upstream commit:
abe68e0ca71dddce0e5419e35507cb464d61870d](cherry picked from commit f6835a60a8a28ff14ffb3dd80c99ce1c137d06c5)Signed-off-by Jianfeng Liu <[email protected]>
Thanks,
- Kever
Quoted 47 lines
---
(no changes since v1)
dts/upstream/src/arm64/rockchip/rk3588s.dtsi | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)dts/upstream/src/arm64/rockchip/rk3588s.dtsi +8
-8@@ -602,13 +602,13 @@ u2phy2: usb2phy@8000 { compatible = "rockchip,rk3588-usb2phy"; reg = <0x8000 0x10>; - interrupts = <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH 0>; - resets = <&cru SRST_OTGPHY_U2_0>, <&cru SRST_P_USB2PHY_U2_0_GRF0>; - reset-names = "phy", "apb"; + #clock-cells = <0>; clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>; clock-names = "phyclk"; clock-output-names = "usb480m_phy2"; - #clock-cells = <0>; + interrupts = <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH 0>; + resets = <&cru SRST_OTGPHY_U2_0>, <&cru SRST_P_USB2PHY_U2_0_GRF0>; + reset-names = "phy", "apb"; status = "disabled"; u2phy2_host: host-port {@@ -627,13 +627,13 @@ u2phy3: usb2phy@c000 { compatible = "rockchip,rk3588-usb2phy"; reg = <0xc000 0x10>; - interrupts = <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH 0>; - resets = <&cru SRST_OTGPHY_U2_1>, <&cru SRST_P_USB2PHY_U2_1_GRF0>; - reset-names = "phy", "apb"; + #clock-cells = <0>; clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>; clock-names = "phyclk"; clock-output-names = "usb480m_phy3"; - #clock-cells = <0>; + interrupts = <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH 0>; + resets = <&cru SRST_OTGPHY_U2_1>, <&cru SRST_P_USB2PHY_U2_1_GRF0>; + reset-names = "phy", "apb"; status = "disabled"; u2phy3_host: host-port {
PATCH v4 5/10 arm64: dts: rockchip: add USBDP phys on rk3588
In reply to Jianfeng LiuFrom: Sebastian Reichel <[email protected]>
Add both USB3-DisplayPort PHYs to RK3588 SoC DT.
[ upstream commit: e18e5e8188f2671abf63abe7db5f21555705130f ]
---
(no changes since v1)
dts/upstream/src/arm64/rockchip/rk3588.dtsi | 52 ++++++++++++++++ dts/upstream/src/arm64/rockchip/rk3588s.dtsi | 63 ++++++++++++++++++++ 2 files changed, 115 insertions(+)
dts/upstream/src/arm64/rockchip/rk3588.dtsi +52 -0
@@ -17,6 +17,36 @@ reg = <0x0 0xfd5c0000 0x0 0x100>; }; + usbdpphy1_grf: syscon@fd5cc000 { + compatible = "rockchip,rk3588-usbdpphy-grf", "syscon"; + reg = <0x0 0xfd5cc000 0x0 0x4000>; + }; + + usb2phy1_grf: syscon@fd5d4000 { + compatible = "rockchip,rk3588-usb2phy-grf", "syscon", "simple-mfd"; + reg = <0x0 0xfd5d4000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + + u2phy1: usb2phy@4000 { + compatible = "rockchip,rk3588-usb2phy"; + reg = <0x4000 0x10>; + #clock-cells = <0>; + clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>; + clock-names = "phyclk"; + clock-output-names = "usb480m_phy1"; + interrupts = <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH 0>; + resets = <&cru SRST_OTGPHY_U3_1>, <&cru SRST_P_USB2PHY_U3_1_GRF0>; + reset-names = "phy", "apb"; + status = "disabled"; + + u2phy1_otg: otg-port { + #phy-cells = <0>; + status = "disabled"; + }; + }; + }; + i2s8_8ch: i2s@fddc8000 { compatible = "rockchip,rk3588-i2s-tdm"; reg = <0x0 0xfddc8000 0x0 0x1000>;
@@ -310,6 +340,28 @@ }; }; + usbdp_phy1: phy@fed90000 { + compatible = "rockchip,rk3588-usbdp-phy"; + reg = <0x0 0xfed90000 0x0 0x10000>; + #phy-cells = <1>; + clocks = <&cru CLK_USBDPPHY_MIPIDCPPHY_REF>, + <&cru CLK_USBDP_PHY1_IMMORTAL>, + <&cru PCLK_USBDPPHY1>, + <&u2phy1>; + clock-names = "refclk", "immortal", "pclk", "utmi"; + resets = <&cru SRST_USBDP_COMBO_PHY1_INIT>, + <&cru SRST_USBDP_COMBO_PHY1_CMN>, + <&cru SRST_USBDP_COMBO_PHY1_LANE>, + <&cru SRST_USBDP_COMBO_PHY1_PCS>, + <&cru SRST_P_USBDPPHY1>; + reset-names = "init", "cmn", "lane", "pcs_apb", "pma_apb"; + rockchip,u2phy-grf = <&usb2phy1_grf>; + rockchip,usb-grf = <&usb_grf>; + rockchip,usbdpphy-grf = <&usbdpphy1_grf>; + rockchip,vo-grf = <&vo0_grf>; + status = "disabled"; + }; + combphy1_ps: phy@fee10000 { compatible = "rockchip,rk3588-naneng-combphy"; reg = <0x0 0xfee10000 0x0 0x100>;
dts/upstream/src/arm64/rockchip/rk3588s.dtsi +63 -0
87 lines not on this page · raw message
Signature · 1 line
2.34.1
Re: [PATCH v4 05/10] arm64: dts: rockchip: add USBDP phys on rk3588
Quoted 4 lines · Jianfeng Liu
From: Sebastian Reichel <[email protected]>
Add both USB3-DisplayPort PHYs to RK3588 SoC DT.
Quoted 8 lines
Signed-off-by Sebastian Reichel <[email protected]>Signed-off-by Heiko Stuebner <[email protected]>[ upstream commit:
e18e5e8188f2671abf63abe7db5f21555705130f](cherry picked from commit 5110caca9865718616cf7093ed4a9a1bc54780db)Signed-off-by Jianfeng Liu <[email protected]>
Thanks,
- Kever
Quoted 172 lines
---
(no changes since v1)
dts/upstream/src/arm64/rockchip/rk3588.dtsi | 52 ++++++++++++++++ dts/upstream/src/arm64/rockchip/rk3588s.dtsi | 63 ++++++++++++++++++++ 2 files changed, 115 insertions(+)dts/upstream/src/arm64/rockchip/rk3588.dtsi +52
-0@@ -17,6 +17,36 @@ reg = <0x0 0xfd5c0000 0x0 0x100>; }; + usbdpphy1_grf: syscon@fd5cc000 { + compatible = "rockchip,rk3588-usbdpphy-grf", "syscon"; + reg = <0x0 0xfd5cc000 0x0 0x4000>; + }; + + usb2phy1_grf: syscon@fd5d4000 { + compatible = "rockchip,rk3588-usb2phy-grf", "syscon", "simple-mfd"; + reg = <0x0 0xfd5d4000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + + u2phy1: usb2phy@4000 { + compatible = "rockchip,rk3588-usb2phy"; + reg = <0x4000 0x10>; + #clock-cells = <0>; + clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>; + clock-names = "phyclk"; + clock-output-names = "usb480m_phy1"; + interrupts = <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH 0>; + resets = <&cru SRST_OTGPHY_U3_1>, <&cru SRST_P_USB2PHY_U3_1_GRF0>; + reset-names = "phy", "apb"; + status = "disabled"; + + u2phy1_otg: otg-port { + #phy-cells = <0>; + status = "disabled"; + }; + }; + }; + i2s8_8ch: i2s@fddc8000 { compatible = "rockchip,rk3588-i2s-tdm"; reg = <0x0 0xfddc8000 0x0 0x1000>;@@ -310,6 +340,28 @@ }; }; + usbdp_phy1: phy@fed90000 { + compatible = "rockchip,rk3588-usbdp-phy"; + reg = <0x0 0xfed90000 0x0 0x10000>; + #phy-cells = <1>; + clocks = <&cru CLK_USBDPPHY_MIPIDCPPHY_REF>, + <&cru CLK_USBDP_PHY1_IMMORTAL>, + <&cru PCLK_USBDPPHY1>, + <&u2phy1>; + clock-names = "refclk", "immortal", "pclk", "utmi"; + resets = <&cru SRST_USBDP_COMBO_PHY1_INIT>, + <&cru SRST_USBDP_COMBO_PHY1_CMN>, + <&cru SRST_USBDP_COMBO_PHY1_LANE>, + <&cru SRST_USBDP_COMBO_PHY1_PCS>, + <&cru SRST_P_USBDPPHY1>; + reset-names = "init", "cmn", "lane", "pcs_apb", "pma_apb"; + rockchip,u2phy-grf = <&usb2phy1_grf>; + rockchip,usb-grf = <&usb_grf>; + rockchip,usbdpphy-grf = <&usbdpphy1_grf>; + rockchip,vo-grf = <&vo0_grf>; + status = "disabled"; + }; + combphy1_ps: phy@fee10000 { compatible = "rockchip,rk3588-naneng-combphy"; reg = <0x0 0xfee10000 0x0 0x100>;dts/upstream/src/arm64/rockchip/rk3588s.dtsi +63
-0@@ -572,12 +572,23 @@ reg = <0x0 0xfd5a4000 0x0 0x2000>; }; + vo0_grf: syscon@fd5a6000 { + compatible = "rockchip,rk3588-vo-grf", "syscon"; + reg = <0x0 0xfd5a6000 0x0 0x2000>; + clocks = <&cru PCLK_VO0GRF>; + }; + vo1_grf: syscon@fd5a8000 { compatible = "rockchip,rk3588-vo-grf", "syscon"; reg = <0x0 0xfd5a8000 0x0 0x100>; clocks = <&cru PCLK_VO1GRF>; }; + usb_grf: syscon@fd5ac000 { + compatible = "rockchip,rk3588-usb-grf", "syscon"; + reg = <0x0 0xfd5ac000 0x0 0x4000>; + }; + php_grf: syscon@fd5b0000 { compatible = "rockchip,rk3588-php-grf", "syscon"; reg = <0x0 0xfd5b0000 0x0 0x1000>;@@ -593,6 +604,36 @@ reg = <0x0 0xfd5c4000 0x0 0x100>; }; + usbdpphy0_grf: syscon@fd5c8000 { + compatible = "rockchip,rk3588-usbdpphy-grf", "syscon"; + reg = <0x0 0xfd5c8000 0x0 0x4000>; + }; + + usb2phy0_grf: syscon@fd5d0000 { + compatible = "rockchip,rk3588-usb2phy-grf", "syscon", "simple-mfd"; + reg = <0x0 0xfd5d0000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + + u2phy0: usb2phy@0 { + compatible = "rockchip,rk3588-usb2phy"; + reg = <0x0 0x10>; + #clock-cells = <0>; + clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>; + clock-names = "phyclk"; + clock-output-names = "usb480m_phy0"; + interrupts = <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH 0>; + resets = <&cru SRST_OTGPHY_U3_0>, <&cru SRST_P_USB2PHY_U3_0_GRF0>; + reset-names = "phy", "apb"; + status = "disabled"; + + u2phy0_otg: otg-port { + #phy-cells = <0>; + status = "disabled"; + }; + }; + }; + usb2phy2_grf: syscon@fd5d8000 { compatible = "rockchip,rk3588-usb2phy-grf", "syscon", "simple-mfd"; reg = <0x0 0xfd5d8000 0x0 0x4000>;@@ -2449,6 +2490,28 @@ status = "disabled"; }; + usbdp_phy0: phy@fed80000 { + compatible = "rockchip,rk3588-usbdp-phy"; + reg = <0x0 0xfed80000 0x0 0x10000>; + #phy-cells = <1>; + clocks = <&cru CLK_USBDPPHY_MIPIDCPPHY_REF>, + <&cru CLK_USBDP_PHY0_IMMORTAL>, + <&cru PCLK_USBDPPHY0>, + <&u2phy0>; + clock-names = "refclk", "immortal", "pclk", "utmi"; + resets = <&cru SRST_USBDP_COMBO_PHY0_INIT>, + <&cru SRST_USBDP_COMBO_PHY0_CMN>, + <&cru SRST_USBDP_COMBO_PHY0_LANE>, + <&cru SRST_USBDP_COMBO_PHY0_PCS>, + <&cru SRST_P_USBDPPHY0>; + reset-names = "init", "cmn", "lane", "pcs_apb", "pma_apb"; + rockchip,u2phy-grf = <&usb2phy0_grf>; + rockchip,usb-grf = <&usb_grf>; + rockchip,usbdpphy-grf = <&usbdpphy0_grf>; + rockchip,vo-grf = <&vo0_grf>; + status = "disabled"; + }; + combphy0_ps: phy@fee00000 { compatible = "rockchip,rk3588-naneng-combphy"; reg = <0x0 0xfee00000 0x0 0x100>;
PATCH v4 6/10 arm64: dts: rockchip: add USB3 DRD controllers on rk3588
In reply to Jianfeng LiuFrom: Sebastian Reichel <[email protected]>
Add both USB3 dual-role controllers to the RK3588 devicetree.
[ upstream commit: 33f393a2a990e16f56931ca708295f31d2b44415 ]
---
(no changes since v1)
dts/upstream/src/arm64/rockchip/rk3588.dtsi | 20 ++++++++++++++++++ dts/upstream/src/arm64/rockchip/rk3588s.dtsi | 22 ++++++++++++++++++++ 2 files changed, 42 insertions(+)
dts/upstream/src/arm64/rockchip/rk3588.dtsi +20 -0
@@ -7,6 +7,26 @@ #include "rk3588-pinctrl.dtsi" / { + usb_host1_xhci: usb@fc400000 { + compatible = "rockchip,rk3588-dwc3", "snps,dwc3"; + reg = <0x0 0xfc400000 0x0 0x400000>; + interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru REF_CLK_USB3OTG1>, <&cru SUSPEND_CLK_USB3OTG1>, + <&cru ACLK_USB3OTG1>; + clock-names = "ref_clk", "suspend_clk", "bus_clk"; + dr_mode = "otg"; + phys = <&u2phy1_otg>, <&usbdp_phy1 PHY_TYPE_USB3>; + phy-names = "usb2-phy", "usb3-phy"; + phy_type = "utmi_wide"; + power-domains = <&power RK3588_PD_USB>; + resets = <&cru SRST_A_USB3OTG1>; + snps,dis_enblslpm_quirk; + snps,dis-u2-freeclk-exists-quirk; + snps,dis-del-phy-power-chg-quirk; + snps,dis-tx-ipgap-linecheck-quirk; + status = "disabled"; + }; + pcie30_phy_grf: syscon@fd5b8000 { compatible = "rockchip,rk3588-pcie3-phy-grf", "syscon"; reg = <0x0 0xfd5b8000 0x0 0x10000>;
dts/upstream/src/arm64/rockchip/rk3588s.dtsi +22 -0
@@ -492,6 +492,28 @@ }; }; + usb_host0_xhci: usb@fc000000 { + compatible = "rockchip,rk3588-dwc3", "snps,dwc3"; + reg = <0x0 0xfc000000 0x0 0x400000>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru REF_CLK_USB3OTG0>, <&cru SUSPEND_CLK_USB3OTG0>, + <&cru ACLK_USB3OTG0>; + clock-names = "ref_clk", "suspend_clk", "bus_clk"; + dr_mode = "otg"; + phys = <&u2phy0_otg>, <&usbdp_phy0 PHY_TYPE_USB3>; + phy-names = "usb2-phy", "usb3-phy"; + phy_type = "utmi_wide"; + power-domains = <&power RK3588_PD_USB>; + resets = <&cru SRST_A_USB3OTG0>; + snps,dis_enblslpm_quirk; + snps,dis-u1-entry-quirk; + snps,dis-u2-entry-quirk; + snps,dis-u2-freeclk-exists-quirk; + snps,dis-del-phy-power-chg-quirk; + snps,dis-tx-ipgap-linecheck-quirk; + status = "disabled"; + }; + usb_host0_ehci: usb@fc800000 { compatible = "rockchip,rk3588-ehci", "generic-ehci"; reg = <0x0 0xfc800000 0x0 0x40000>;
Signature · 1 line
2.34.1
Re: [PATCH v4 06/10] arm64: dts: rockchip: add USB3 DRD controllers on rk3588
Quoted 4 lines · Jianfeng Liu
From: Sebastian Reichel <[email protected]>
Add both USB3 dual-role controllers to the RK3588 devicetree.
Quoted 8 lines
Signed-off-by Sebastian Reichel <[email protected]>Signed-off-by Heiko Stuebner <[email protected]>[ upstream commit:
33f393a2a990e16f56931ca708295f31d2b44415](cherry picked from commit c7ed588e14f7dd04a92fb55f12680f94c7b14edf)Signed-off-by Jianfeng Liu <[email protected]>
Thanks,
- Kever
Quoted 72 lines
---
(no changes since v1)
dts/upstream/src/arm64/rockchip/rk3588.dtsi | 20 ++++++++++++++++++ dts/upstream/src/arm64/rockchip/rk3588s.dtsi | 22 ++++++++++++++++++++ 2 files changed, 42 insertions(+)dts/upstream/src/arm64/rockchip/rk3588.dtsi +20
-0@@ -7,6 +7,26 @@ #include "rk3588-pinctrl.dtsi" / { + usb_host1_xhci: usb@fc400000 { + compatible = "rockchip,rk3588-dwc3", "snps,dwc3"; + reg = <0x0 0xfc400000 0x0 0x400000>; + interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru REF_CLK_USB3OTG1>, <&cru SUSPEND_CLK_USB3OTG1>, + <&cru ACLK_USB3OTG1>; + clock-names = "ref_clk", "suspend_clk", "bus_clk"; + dr_mode = "otg"; + phys = <&u2phy1_otg>, <&usbdp_phy1 PHY_TYPE_USB3>; + phy-names = "usb2-phy", "usb3-phy"; + phy_type = "utmi_wide"; + power-domains = <&power RK3588_PD_USB>; + resets = <&cru SRST_A_USB3OTG1>; + snps,dis_enblslpm_quirk; + snps,dis-u2-freeclk-exists-quirk; + snps,dis-del-phy-power-chg-quirk; + snps,dis-tx-ipgap-linecheck-quirk; + status = "disabled"; + }; + pcie30_phy_grf: syscon@fd5b8000 { compatible = "rockchip,rk3588-pcie3-phy-grf", "syscon"; reg = <0x0 0xfd5b8000 0x0 0x10000>;dts/upstream/src/arm64/rockchip/rk3588s.dtsi +22
-0@@ -492,6 +492,28 @@ }; }; + usb_host0_xhci: usb@fc000000 { + compatible = "rockchip,rk3588-dwc3", "snps,dwc3"; + reg = <0x0 0xfc000000 0x0 0x400000>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru REF_CLK_USB3OTG0>, <&cru SUSPEND_CLK_USB3OTG0>, + <&cru ACLK_USB3OTG0>; + clock-names = "ref_clk", "suspend_clk", "bus_clk"; + dr_mode = "otg"; + phys = <&u2phy0_otg>, <&usbdp_phy0 PHY_TYPE_USB3>; + phy-names = "usb2-phy", "usb3-phy"; + phy_type = "utmi_wide"; + power-domains = <&power RK3588_PD_USB>; + resets = <&cru SRST_A_USB3OTG0>; + snps,dis_enblslpm_quirk; + snps,dis-u1-entry-quirk; + snps,dis-u2-entry-quirk; + snps,dis-u2-freeclk-exists-quirk; + snps,dis-del-phy-power-chg-quirk; + snps,dis-tx-ipgap-linecheck-quirk; + status = "disabled"; + }; + usb_host0_ehci: usb@fc800000 { compatible = "rockchip,rk3588-ehci", "generic-ehci"; reg = <0x0 0xfc800000 0x0 0x40000>;
PATCH v4 7/10 arm64: dts: rockchip: add rk3588 pcie and php IOMMUs
In reply to Jianfeng LiuFrom: Niklas Cassel <[email protected]>
The mmu600_pcie is connected with the five PCIe controllers. The mmu600_php is connected with the USB3 controller, the GMAC controllers, and the SATA controllers.
See 8.2 Block Diagram, in rk3588 TRM (Technical Reference Manual).
The IOMMUs are disabled by default, as further patches are needed to program the SID/SSIDs in to the IOMMUs.
iommu: Default domain type: Translated
iommu: DMA domain TLB invalidation policy: strict mode arm-smmu-v3 fc900000.iommu: ias 48-bit, oas 48-bit (features 0x001c1eaf) arm-smmu-v3 fc900000.iommu: allocated 65536 entries for cmdq arm-smmu-v3 fc900000.iommu: allocated 32768 entries for evtq arm-smmu-v3 fc900000.iommu: msi_domain absent - falling back to wired irqs
Additionally, the IOMMU correctly triggers an IOMMU fault when a PCIe device performs a write (since the device hasn't been assigned a SID/SSID):
arm-smmu-v3 fc900000.iommu: event 0x02 received: arm-smmu-v3 fc900000.iommu: 0x0000010000000002 arm-smmu-v3 fc900000.iommu: 0x0000000000000000 arm-smmu-v3 fc900000.iommu: 0x0000000000000000 arm-smmu-v3 fc900000.iommu: 0x0000000000000000
While this doesn't provide much value as is, having the devices as disabled in the device tree will allow developers to see that the rk3588 actually has IOMMUs on the SoC.
[ upstream commit: cd81d3a0695cc54ad6ac0ef4bbb67a7c8f55d592 ]
---
(no changes since v1)
dts/upstream/src/arm64/rockchip/rk3588s.dtsi | 24 ++++++++++++++++++++ 1 file changed, 24 insertions(+)
dts/upstream/src/arm64/rockchip/rk3588s.dtsi +24 -0
@@ -579,6 +579,30 @@ status = "disabled"; }; + mmu600_pcie: iommu@fc900000 { + compatible = "arm,smmu-v3"; + reg = <0x0 0xfc900000 0x0 0x200000>; + interrupts = <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "eventq", "gerror", "priq", "cmdq-sync"; + #iommu-cells = <1>; + status = "disabled"; + }; + + mmu600_php: iommu@fcb00000 { + compatible = "arm,smmu-v3"; + reg = <0x0 0xfcb00000 0x0 0x200000>; + interrupts = <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 386 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "eventq", "gerror", "priq", "cmdq-sync"; + #iommu-cells = <1>; + status = "disabled"; + }; + pmu1grf: syscon@fd58a000 { compatible = "rockchip,rk3588-pmugrf", "syscon", "simple-mfd"; reg = <0x0 0xfd58a000 0x0 0x10000>;
Signature · 1 line
2.34.1
Re: [PATCH v4 07/10] arm64: dts: rockchip: add rk3588 pcie and php IOMMUs
Quoted 31 lines · Jianfeng Liu
From: Niklas Cassel <[email protected]>
The
mmu600_pcieis connected with the five PCIe controllers. Themmu600_phpis connected with the USB3 controller, the GMAC controllers, and the SATA controllers.See 8.2 Block Diagram, in rk3588 TRM (Technical Reference Manual).
The IOMMUs are disabled by default, as further patches are needed to program the SID/SSIDs in to the IOMMUs.
iommu: Default domain type: Translated
iommu: DMA domain TLB invalidation policy: strict mode arm-smmu-v3 fc900000.iommu: ias 48-bit, oas 48-bit (features0x001c1eaf) arm-smmu-v3 fc900000.iommu: allocated 65536 entries for cmdq arm-smmu-v3 fc900000.iommu: allocated 32768 entries for evtq arm-smmu-v3 fc900000.iommu:msi_domainabsent - falling back to wired irqsAdditionally, the IOMMU correctly triggers an IOMMU fault when a PCIe device performs a write (since the device hasn't been assigned a SID/SSID):
arm-smmu-v3 fc900000.iommu: event 0x02 received: arm-smmu-v3 fc900000.iommu: 0x0000010000000002 arm-smmu-v3 fc900000.iommu: 0x0000000000000000 arm-smmu-v3 fc900000.iommu: 0x0000000000000000 arm-smmu-v3 fc900000.iommu: 0x0000000000000000While this doesn't provide much value as is, having the devices as disabled in the device tree will allow developers to see that the rk3588 actually has IOMMUs on the SoC.
Quoted 8 lines
Signed-off-by Niklas Cassel <[email protected]>Signed-off-by Heiko Stuebner <[email protected]>[ upstream commit:
cd81d3a0695cc54ad6ac0ef4bbb67a7c8f55d592](cherry picked from commit ea9a34aa0d786cbf4b87f1ba528e69b07219738f)Signed-off-by Jianfeng Liu <[email protected]>
Thanks,
- Kever
Quoted 42 lines
---
(no changes since v1)
dts/upstream/src/arm64/rockchip/rk3588s.dtsi | 24 ++++++++++++++++++++ 1 file changed, 24 insertions(+)dts/upstream/src/arm64/rockchip/rk3588s.dtsi +24
-0@@ -579,6 +579,30 @@ status = "disabled"; }; + mmu600_pcie: iommu@fc900000 { + compatible = "arm,smmu-v3"; + reg = <0x0 0xfc900000 0x0 0x200000>; + interrupts = <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "eventq", "gerror", "priq", "cmdq-sync"; + #iommu-cells = <1>; + status = "disabled"; + }; + + mmu600_php: iommu@fcb00000 { + compatible = "arm,smmu-v3"; + reg = <0x0 0xfcb00000 0x0 0x200000>; + interrupts = <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 386 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "eventq", "gerror", "priq", "cmdq-sync"; + #iommu-cells = <1>; + status = "disabled"; + }; + pmu1grf: syscon@fd58a000 { compatible = "rockchip,rk3588-pmugrf", "syscon", "simple-mfd"; reg = <0x0 0xfd58a000 0x0 0x10000>;
PATCH v4 8/10 arm64: dts: rockchip: Add ArmSom Sige7 board
In reply to Jianfeng LiuSpecification:
Rockchip Rk3588 SoC
4x ARM Cortex-A76, 4x ARM Cortex-A55 8/16/32GB Memory LPDDR4/LPDDR4x
Mali G610MP4 GPU
2× MIPI-CSI Connector
1× MIPI-DSI Connector
1x M.2 Key M (PCIe 3.0 4-lanes)
2x RTL8125 2.5G Ethernet
Onboard AP6275P for WIFI6/BT5 32GB/64GB/128GB eMMC
MicroSD card slot
1x USB2.0, 1x USB3.0 Type-A, 1x US3.0 Type-C 1x HDMI Output, 1x type-C DP Output
Functions work normally:
USB2.0 Host
USB3.0 Type-A Host
M.2 Key M (PCIe 3.0 4-lanes)
2x RTL8125 2.5G Ethernet
eMMC
MicroSD cardMore information can be obtained from the following website
https://docs.armsom.org/armsom-sige7
[ upstream commit: 81c828a67c78bb03ea75819c417c93c7f3d637b5 ]
(cherry picked from commit d427a11542bcf5364a5260280e077f0a2e030dcb)
---
(no changes since v1)
.../arm64/rockchip/rk3588-armsom-sige7.dts | 721 ++++++++++++++++++ 1 file changed, 721 insertions(+) create mode 100644 dts/upstream/src/arm64/rockchip/rk3588-armsom-sige7.dts
dts/upstream/src/arm64/rockchip/rk3588-armsom-sige7.dts new file +721 -0
@@ -0,0 +1,721 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include "rk3588.dtsi" + +/ { + model = "ArmSoM Sige7"; + compatible = "armsom,sige7", "rockchip,rk3588"; + + aliases { + mmc0 = &sdhci; + mmc1 = &sdmmc; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + analog-sound { + compatible = "audio-graph-card"; + dais = <&i2s0_8ch_p0>; + label = "rk3588-es8316"; + hp-det-gpio = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hp_detect>; + routing = "MIC2", "Mic Jack", + "Headphones", "HPOL", + "Headphones", "HPOR"; + widgets = "Microphone", "Mic Jack", + "Headphone", "Headphones"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_rgb_g>; + + led_green: led-0 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_STATUS; + gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + led_red: led-1 { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_STATUS; + gpios = <&gpio4 RK_PC5 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "none"; + }; + }; + + fan: pwm-fan { + compatible = "pwm-fan"; + cooling-levels = <0 95 145 195 255>; + fan-supply = <&vcc5v0_sys>; + pwms = <&pwm1 0 50000 0>; + #cooling-cells = <2>; + }; + + vcc3v3_pcie2x1l2: vcc3v3-pcie2x1l2-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_pcie2x1l2"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <5000>; + vin-supply = <&vcc_3v3_s3>; + }; + + vcc3v3_pcie30: vcc3v3-pcie30-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>; + regulator-name = "vcc3v3_pcie30"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <5000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_host: vcc5v0-host-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_host"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_host_en>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_sys: vcc5v0-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_1v1_nldo_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + vin-supply = <&vcc5v0_sys>; + }; +}; + +&combphy0_ps { + status = "okay"; +}; + +&combphy1_ps { + status = "okay"; +}; + +&combphy2_psu { + status = "okay"; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b2 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_b3 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&gpu { + mali-supply = <&vdd_gpu_s0>; + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0m2_xfer>; + status = "okay"; + + vdd_cpu_big0_s0: regulator@42 { + compatible = "rockchip,rk8602"; + reg = <0x42>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big0_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_big1_s0: regulator@43 { + compatible = "rockchip,rk8603", "rockchip,rk8602"; + reg = <0x43>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big1_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c6 { + status = "okay"; + + hym8563: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <0>; + clock-output-names = "hym8563"; + pinctrl-names = "default"; + pinctrl-0 = <&hym8563_int>; + wakeup-source; + }; +}; + +&i2c7 { + status = "okay"; + + es8316: audio-codec@11 { + compatible = "everest,es8316"; + reg = <0x11>; + assigned-clocks = <&cru I2S0_8CH_MCLKOUT>; + assigned-clock-rates = <12288000>; + clocks = <&cru I2S0_8CH_MCLKOUT>; + clock-names = "mclk"; + #sound-dai-cells = <0>; + + port { + es8316_p0_0: endpoint { + remote-endpoint = <&i2s0_8ch_p0_0>; + }; + }; + }; +}; + +&i2s0_8ch { + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_lrck + &i2s0_mclk + &i2s0_sclk + &i2s0_sdi0 + &i2s0_sdo0>; + status = "okay"; + + i2s0_8ch_p0: port { + i2s0_8ch_p0_0: endpoint { + dai-format = "i2s"; + mclk-fs = <256>; + remote-endpoint = <&es8316_p0_0>; + }; + }; +}; + +/* phy1 - right ethernet port */ +&pcie2x1l0 { + reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +/* phy2 - WiFi */ +&pcie2x1l1 { + reset-gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +/* phy0 - left ethernet port */ +&pcie2x1l2 { + reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&pcie30phy { + status = "okay"; +}; + +&pcie3x4 { + reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie30>; + status = "okay"; +}; + +&pinctrl { + hym8563 { + hym8563_int: hym8563-int { + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + leds { + led_rgb_g: led-rgb-g { + rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + led_rgb_r: led-rgb-r { + rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sound { + hp_detect: hp-detect { + rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb { + vcc5v0_host_en: vcc5v0-host-en { + rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm1 { + status = "okay"; +}; + +&saradc { + vref-supply = <&avcc_1v8_s0>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + no-sdio; + no-sd; + non-removable; + mmc-hs200-1_8v; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + max-frequency = <200000000>; + no-sdio; + no-mmc; + sd-uhs-sdr104; + vmmc-supply = <&vcc_3v3_s3>; + vqmmc-supply = <&vccio_sd_s0>; + status = "okay"; +}; + +&spi2 { + assigned-clocks = <&cru CLK_SPI2>; + assigned-clock-rates = <200000000>; + num-cs = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>; + status = "okay"; + + pmic@0 { + compatible = "rockchip,rk806"; + spi-max-frequency = <1000000>; + reg = <0x0>; + + interrupt-parent = <&gpio0>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + + gpio-controller; + #gpio-cells = <2>; + + pinctrl-names = "default"; + pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, + <&rk806_dvs2_null>, <&rk806_dvs3_null>; + + system-power-controller; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc5v0_sys>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc_2v0_pldo_s3>; + vcc12-supply = <&vcc5v0_sys>; + vcc13-supply = <&vcc_1v1_nldo_s3>; + vcc14-supply = <&vcc_1v1_nldo_s3>; + vcca-supply = <&vcc5v0_sys>; + + rk806_dvs1_null: dvs1-null-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun0"; + }; + + rk806_dvs2_null: dvs2-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs3_null: dvs3-null-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun0"; + }; + + regulators { + vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_gpu_s0"; + regulator-enable-ramp-delay = <400>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_cpu_lit_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_log_s0: dcdc-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <750000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_log_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_vdenc_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_ddr_s0: dcdc-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <900000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_ddr_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + vdd2_ddr_s3: dcdc-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vdd2_ddr_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_2v0_pldo_s3: dcdc-reg7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_2v0_pldo_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <2000000>; + }; + }; + + vcc_3v3_s3: dcdc-reg8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_3v3_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vddq_ddr_s0: dcdc-reg9 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vddq_ddr_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s3: dcdc-reg10 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avcc_1v8_s0: pldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "avcc_1v8_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s0: pldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avdd_1v2_s0: pldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "avdd_1v2_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3_s0: pldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + regulator-name = "vcc_3v3_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd_s0: pldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + regulator-name = "vccio_sd_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + pldo6_s3: pldo-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "pldo6_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_0v75_s3: nldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "vdd_0v75_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_ddr_pll_s0: nldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdd_ddr_pll_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + avdd_0v75_s0: nldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "avdd_0v75_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v85_s0: nldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdd_0v85_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v75_s0: nldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "vdd_0v75_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&u2phy0 { + status = "okay"; +}; + +&u2phy0_otg { + status = "okay"; +}; + +&u2phy1 { + status = "okay"; +}; + +&u2phy1_otg { + status = "okay"; +}; + +&u2phy3 { + status = "okay"; +}; + +&u2phy3_host { + phy-supply = <&vcc5v0_host>; + status = "okay"; +}; + +&uart2 { + pinctrl-0 = <&uart2m0_xfer>; + status = "okay"; +}; + +&usbdp_phy1 { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usb_host1_xhci { + dr_mode = "host"; + status = "okay"; +};
Signature · 1 line
2.34.1
Re: [PATCH v4 08/10] arm64: dts: rockchip: Add ArmSom Sige7 board
Quoted 26 lines · Jianfeng Liu
Specification:
Rockchip Rk3588 SoC
4x ARM Cortex-A76, 4x ARM Cortex-A55 8/16/32GB Memory LPDDR4/LPDDR4x
Mali G610MP4 GPU
2× MIPI-CSI Connector
1× MIPI-DSI Connector
1x M.2 Key M (PCIe 3.0 4-lanes)
2x RTL8125 2.5G Ethernet
Onboard AP6275P for WIFI6/BT5 32GB/64GB/128GB eMMC
MicroSD card slot
1x USB2.0, 1x USB3.0 Type-A, 1x US3.0 Type-C 1x HDMI Output, 1x type-C DP OutputFunctions work normally:
USB2.0 Host USB3.0 Type-A Host M.2 Key M (PCIe 3.0 4-lanes) 2x RTL8125 2.5G Ethernet eMMC MicroSD cardMore information can be obtained from the following website
https://docs.armsom.org/armsom-sige7
Quoted 8 lines
Signed-off-by Jianfeng Liu <[email protected]>Reviewed-by Weizhao Ouyang <[email protected]>Signed-off-by Heiko Stuebner <[email protected]>[ upstream commit:
81c828a67c78bb03ea75819c417c93c7f3d637b5](cherry picked from commit
d427a11542bcf5364a5260280e077f0a2e030dcb)
Thanks,
- Kever
Quoted 735 lines
---
(no changes since v1)
.../arm64/rockchip/rk3588-armsom-sige7.dts | 721 ++++++++++++++++++ 1 file changed, 721 insertions(+)create mode 100644
dts/upstream/src/arm64/rockchip/rk3588-armsom-sige7.dtsdts/upstream/src/arm64/rockchip/rk3588-armsom-sige7.dts new file +721
-0@@ -0,0 +1,721 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include "rk3588.dtsi" + +/ { + model = "ArmSoM Sige7"; + compatible = "armsom,sige7", "rockchip,rk3588"; + + aliases { + mmc0 = &sdhci; + mmc1 = &sdmmc; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + analog-sound { + compatible = "audio-graph-card"; + dais = <&i2s0_8ch_p0>; + label = "rk3588-es8316"; + hp-det-gpio = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hp_detect>; + routing = "MIC2", "Mic Jack", + "Headphones", "HPOL", + "Headphones", "HPOR"; + widgets = "Microphone", "Mic Jack", + "Headphone", "Headphones"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_rgb_g>; + + led_green: led-0 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_STATUS; + gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + led_red: led-1 { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_STATUS; + gpios = <&gpio4 RK_PC5 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "none"; + }; + }; + + fan: pwm-fan { + compatible = "pwm-fan"; + cooling-levels = <0 95 145 195 255>; + fan-supply = <&vcc5v0_sys>; + pwms = <&pwm1 0 50000 0>; + #cooling-cells = <2>; + }; + + vcc3v3_pcie2x1l2: vcc3v3-pcie2x1l2-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_pcie2x1l2"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <5000>; + vin-supply = <&vcc_3v3_s3>; + }; + + vcc3v3_pcie30: vcc3v3-pcie30-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>; + regulator-name = "vcc3v3_pcie30"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <5000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_host: vcc5v0-host-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_host"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_host_en>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_sys: vcc5v0-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_1v1_nldo_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + vin-supply = <&vcc5v0_sys>; + }; +}; + +&combphy0_ps { + status = "okay"; +}; + +&combphy1_ps { + status = "okay"; +}; + +&combphy2_psu { + status = "okay"; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b2 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_b3 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&gpu { + mali-supply = <&vdd_gpu_s0>; + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0m2_xfer>; + status = "okay"; + + vdd_cpu_big0_s0: regulator@42 { + compatible = "rockchip,rk8602"; + reg = <0x42>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big0_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_big1_s0: regulator@43 { + compatible = "rockchip,rk8603", "rockchip,rk8602"; + reg = <0x43>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big1_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c6 { + status = "okay"; + + hym8563: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <0>; + clock-output-names = "hym8563"; + pinctrl-names = "default"; + pinctrl-0 = <&hym8563_int>; + wakeup-source; + }; +}; + +&i2c7 { + status = "okay"; + + es8316: audio-codec@11 { + compatible = "everest,es8316"; + reg = <0x11>; + assigned-clocks = <&cru I2S0_8CH_MCLKOUT>; + assigned-clock-rates = <12288000>; + clocks = <&cru I2S0_8CH_MCLKOUT>; + clock-names = "mclk"; + #sound-dai-cells = <0>; + + port { + es8316_p0_0: endpoint { + remote-endpoint = <&i2s0_8ch_p0_0>; + }; + }; + }; +}; + +&i2s0_8ch { + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_lrck + &i2s0_mclk + &i2s0_sclk + &i2s0_sdi0 + &i2s0_sdo0>; + status = "okay"; + + i2s0_8ch_p0: port { + i2s0_8ch_p0_0: endpoint { + dai-format = "i2s"; + mclk-fs = <256>; + remote-endpoint = <&es8316_p0_0>; + }; + }; +}; + +/* phy1 - right ethernet port */ +&pcie2x1l0 { + reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +/* phy2 - WiFi */ +&pcie2x1l1 { + reset-gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +/* phy0 - left ethernet port */ +&pcie2x1l2 { + reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&pcie30phy { + status = "okay"; +}; + +&pcie3x4 { + reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie30>; + status = "okay"; +}; + +&pinctrl { + hym8563 { + hym8563_int: hym8563-int { + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + leds { + led_rgb_g: led-rgb-g { + rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + led_rgb_r: led-rgb-r { + rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sound { + hp_detect: hp-detect { + rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb { + vcc5v0_host_en: vcc5v0-host-en { + rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm1 { + status = "okay"; +}; + +&saradc { + vref-supply = <&avcc_1v8_s0>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + no-sdio; + no-sd; + non-removable; + mmc-hs200-1_8v; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + max-frequency = <200000000>; + no-sdio; + no-mmc; + sd-uhs-sdr104; + vmmc-supply = <&vcc_3v3_s3>; + vqmmc-supply = <&vccio_sd_s0>; + status = "okay"; +}; + +&spi2 { + assigned-clocks = <&cru CLK_SPI2>; + assigned-clock-rates = <200000000>; + num-cs = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>; + status = "okay"; + + pmic@0 { + compatible = "rockchip,rk806"; + spi-max-frequency = <1000000>; + reg = <0x0>; + + interrupt-parent = <&gpio0>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + + gpio-controller; + #gpio-cells = <2>; + + pinctrl-names = "default"; + pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, + <&rk806_dvs2_null>, <&rk806_dvs3_null>; + + system-power-controller; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc5v0_sys>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc_2v0_pldo_s3>; + vcc12-supply = <&vcc5v0_sys>; + vcc13-supply = <&vcc_1v1_nldo_s3>; + vcc14-supply = <&vcc_1v1_nldo_s3>; + vcca-supply = <&vcc5v0_sys>; + + rk806_dvs1_null: dvs1-null-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun0"; + }; + + rk806_dvs2_null: dvs2-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs3_null: dvs3-null-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun0"; + }; + + regulators { + vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_gpu_s0"; + regulator-enable-ramp-delay = <400>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_cpu_lit_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_log_s0: dcdc-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <750000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_log_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_vdenc_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_ddr_s0: dcdc-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <900000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_ddr_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + vdd2_ddr_s3: dcdc-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vdd2_ddr_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_2v0_pldo_s3: dcdc-reg7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_2v0_pldo_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <2000000>; + }; + }; + + vcc_3v3_s3: dcdc-reg8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_3v3_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vddq_ddr_s0: dcdc-reg9 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vddq_ddr_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s3: dcdc-reg10 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avcc_1v8_s0: pldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "avcc_1v8_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s0: pldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avdd_1v2_s0: pldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "avdd_1v2_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3_s0: pldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + regulator-name = "vcc_3v3_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd_s0: pldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + regulator-name = "vccio_sd_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + pldo6_s3: pldo-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "pldo6_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_0v75_s3: nldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "vdd_0v75_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_ddr_pll_s0: nldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdd_ddr_pll_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + avdd_0v75_s0: nldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "avdd_0v75_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v85_s0: nldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdd_0v85_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v75_s0: nldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "vdd_0v75_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&u2phy0 { + status = "okay"; +}; + +&u2phy0_otg { + status = "okay"; +}; + +&u2phy1 { + status = "okay"; +}; + +&u2phy1_otg { + status = "okay"; +}; + +&u2phy3 { + status = "okay"; +}; + +&u2phy3_host { + phy-supply = <&vcc5v0_host>; + status = "okay"; +}; + +&uart2 { + pinctrl-0 = <&uart2m0_xfer>; + status = "okay"; +}; + +&usbdp_phy1 { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usb_host1_xhci { + dr_mode = "host"; + status = "okay"; +};
PATCH v4 9/10 rockchip: rk3588: Remove USB3 DRD nodes in u-boot.dtsi
In reply to Jianfeng LiuAfter we sync USB3 DRD nodes from v6.10-rc1, these obsolete nodes can be removed.
---
(no changes since v1)
arch/arm/dts/rk3588-u-boot.dtsi | 74 --------------------------- arch/arm/dts/rk3588s-u-boot.dtsi | 85 -------------------------------- 2 files changed, 159 deletions(-)
arch/arm/dts/rk3588-u-boot.dtsi +0 -74
@@ -4,77 +4,3 @@ */ #include "rk3588s-u-boot.dtsi" - -/ { - usb_host1_xhci: usb@fc400000 { - compatible = "rockchip,rk3588-dwc3", "snps,dwc3"; - reg = <0x0 0xfc400000 0x0 0x400000>; - interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru REF_CLK_USB3OTG1>, <&cru SUSPEND_CLK_USB3OTG1>, - <&cru ACLK_USB3OTG1>; - clock-names = "ref_clk", "suspend_clk", "bus_clk"; - dr_mode = "otg"; - phys = <&u2phy1_otg>, <&usbdp_phy1 PHY_TYPE_USB3>; - phy-names = "usb2-phy", "usb3-phy"; - phy_type = "utmi_wide"; - power-domains = <&power RK3588_PD_USB>; - resets = <&cru SRST_A_USB3OTG1>; - snps,dis_enblslpm_quirk; - snps,dis-u2-freeclk-exists-quirk; - snps,dis-del-phy-power-chg-quirk; - snps,dis-tx-ipgap-linecheck-quirk; - status = "disabled"; - }; - - usbdpphy1_grf: syscon@fd5cc000 { - compatible = "rockchip,rk3588-usbdpphy-grf", "syscon"; - reg = <0x0 0xfd5cc000 0x0 0x4000>; - }; - - usb2phy1_grf: syscon@fd5d4000 { - compatible = "rockchip,rk3588-usb2phy-grf", "syscon", "simple-mfd"; - reg = <0x0 0xfd5d4000 0x0 0x4000>; - #address-cells = <1>; - #size-cells = <1>; - - u2phy1: usb2phy@4000 { - compatible = "rockchip,rk3588-usb2phy"; - reg = <0x4000 0x10>; - #clock-cells = <0>; - clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>; - clock-names = "phyclk"; - clock-output-names = "usb480m_phy1"; - interrupts = <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH 0>; - resets = <&cru SRST_OTGPHY_U3_1>, <&cru SRST_P_USB2PHY_U3_1_GRF0>; - reset-names = "phy", "apb"; - status = "disabled"; - - u2phy1_otg: otg-port { - #phy-cells = <0>; - status = "disabled"; - }; - }; - }; - - usbdp_phy1: phy@fed90000 { - compatible = "rockchip,rk3588-usbdp-phy"; - reg = <0x0 0xfed90000 0x0 0x10000>; - #phy-cells = <1>; - clocks = <&cru CLK_USBDPPHY_MIPIDCPPHY_REF>, - <&cru CLK_USBDP_PHY1_IMMORTAL>, - <&cru PCLK_USBDPPHY1>, - <&u2phy1>; - clock-names = "refclk", "immortal", "pclk", "utmi"; - resets = <&cru SRST_USBDP_COMBO_PHY1_INIT>, - <&cru SRST_USBDP_COMBO_PHY1_CMN>, - <&cru SRST_USBDP_COMBO_PHY1_LANE>, - <&cru SRST_USBDP_COMBO_PHY1_PCS>, - <&cru SRST_P_USBDPPHY1>; - reset-names = "init", "cmn", "lane", "pcs_apb", "pma_apb"; - rockchip,u2phy-grf = <&usb2phy1_grf>; - rockchip,usb-grf = <&usb_grf>; - rockchip,usbdpphy-grf = <&usbdpphy1_grf>; - rockchip,vo-grf = <&vo0_grf>; - status = "disabled"; - }; -};
arch/arm/dts/rk3588s-u-boot.dtsi +0 -85
95 lines not on this page · raw message
Signature · 1 line
2.34.1
Re: [PATCH v4 09/10] rockchip: rk3588: Remove USB3 DRD nodes in u-boot.dtsi
Quoted 4 lines · Jianfeng Liu
After we sync USB3 DRD nodes from v6.10-rc1, these obsolete nodes can be removed.
Signed-off-by Jianfeng Liu <[email protected]>
Thanks,
- Kever
Quoted 190 lines
---
(no changes since v1)
arch/arm/dts/rk3588-u-boot.dtsi | 74 --------------------------- arch/arm/dts/rk3588s-u-boot.dtsi | 85 -------------------------------- 2 files changed, 159 deletions(-)arch/arm/dts/rk3588-u-boot.dtsi +0
-74@@ -4,77 +4,3 @@ */ #include "rk3588s-u-boot.dtsi" - -/ { - usb_host1_xhci: usb@fc400000 { - compatible = "rockchip,rk3588-dwc3", "snps,dwc3"; - reg = <0x0 0xfc400000 0x0 0x400000>; - interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru REF_CLK_USB3OTG1>, <&cru SUSPEND_CLK_USB3OTG1>, - <&cru ACLK_USB3OTG1>; - clock-names = "ref_clk", "suspend_clk", "bus_clk"; - dr_mode = "otg"; - phys = <&u2phy1_otg>, <&usbdp_phy1 PHY_TYPE_USB3>; - phy-names = "usb2-phy", "usb3-phy"; - phy_type = "utmi_wide"; - power-domains = <&power RK3588_PD_USB>; - resets = <&cru SRST_A_USB3OTG1>; - snps,dis_enblslpm_quirk; - snps,dis-u2-freeclk-exists-quirk; - snps,dis-del-phy-power-chg-quirk; - snps,dis-tx-ipgap-linecheck-quirk; - status = "disabled"; - }; - - usbdpphy1_grf: syscon@fd5cc000 { - compatible = "rockchip,rk3588-usbdpphy-grf", "syscon"; - reg = <0x0 0xfd5cc000 0x0 0x4000>; - }; - - usb2phy1_grf: syscon@fd5d4000 { - compatible = "rockchip,rk3588-usb2phy-grf", "syscon", "simple-mfd"; - reg = <0x0 0xfd5d4000 0x0 0x4000>; - #address-cells = <1>; - #size-cells = <1>; - - u2phy1: usb2phy@4000 { - compatible = "rockchip,rk3588-usb2phy"; - reg = <0x4000 0x10>; - #clock-cells = <0>; - clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>; - clock-names = "phyclk"; - clock-output-names = "usb480m_phy1"; - interrupts = <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH 0>; - resets = <&cru SRST_OTGPHY_U3_1>, <&cru SRST_P_USB2PHY_U3_1_GRF0>; - reset-names = "phy", "apb"; - status = "disabled"; - - u2phy1_otg: otg-port { - #phy-cells = <0>; - status = "disabled"; - }; - }; - }; - - usbdp_phy1: phy@fed90000 { - compatible = "rockchip,rk3588-usbdp-phy"; - reg = <0x0 0xfed90000 0x0 0x10000>; - #phy-cells = <1>; - clocks = <&cru CLK_USBDPPHY_MIPIDCPPHY_REF>, - <&cru CLK_USBDP_PHY1_IMMORTAL>, - <&cru PCLK_USBDPPHY1>, - <&u2phy1>; - clock-names = "refclk", "immortal", "pclk", "utmi"; - resets = <&cru SRST_USBDP_COMBO_PHY1_INIT>, - <&cru SRST_USBDP_COMBO_PHY1_CMN>, - <&cru SRST_USBDP_COMBO_PHY1_LANE>, - <&cru SRST_USBDP_COMBO_PHY1_PCS>, - <&cru SRST_P_USBDPPHY1>; - reset-names = "init", "cmn", "lane", "pcs_apb", "pma_apb"; - rockchip,u2phy-grf = <&usb2phy1_grf>; - rockchip,usb-grf = <&usb_grf>; - rockchip,usbdpphy-grf = <&usbdpphy1_grf>; - rockchip,vo-grf = <&vo0_grf>; - status = "disabled"; - }; -};arch/arm/dts/rk3588s-u-boot.dtsi +0
-85@@ -19,95 +19,10 @@ bootph-all; }; - usb_host0_xhci: usb@fc000000 { - compatible = "rockchip,rk3588-dwc3", "snps,dwc3"; - reg = <0x0 0xfc000000 0x0 0x400000>; - interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru REF_CLK_USB3OTG0>, <&cru SUSPEND_CLK_USB3OTG0>, - <&cru ACLK_USB3OTG0>; - clock-names = "ref_clk", "suspend_clk", "bus_clk"; - dr_mode = "otg"; - phys = <&u2phy0_otg>, <&usbdp_phy0 PHY_TYPE_USB3>; - phy-names = "usb2-phy", "usb3-phy"; - phy_type = "utmi_wide"; - power-domains = <&power RK3588_PD_USB>; - resets = <&cru SRST_A_USB3OTG0>; - snps,dis_enblslpm_quirk; - snps,dis-u1-entry-quirk; - snps,dis-u2-entry-quirk; - snps,dis-u2-freeclk-exists-quirk; - snps,dis-del-phy-power-chg-quirk; - snps,dis-tx-ipgap-linecheck-quirk; - status = "disabled"; - }; - - vo0_grf: syscon@fd5a6000 { - compatible = "rockchip,rk3588-vo-grf", "syscon"; - reg = <0x0 0xfd5a6000 0x0 0x2000>; - clocks = <&cru PCLK_VO0GRF>; - }; - - usb_grf: syscon@fd5ac000 { - compatible = "rockchip,rk3588-usb-grf", "syscon"; - reg = <0x0 0xfd5ac000 0x0 0x4000>; - }; - - usbdpphy0_grf: syscon@fd5c8000 { - compatible = "rockchip,rk3588-usbdpphy-grf", "syscon"; - reg = <0x0 0xfd5c8000 0x0 0x4000>; - }; - - usb2phy0_grf: syscon@fd5d0000 { - compatible = "rockchip,rk3588-usb2phy-grf", "syscon", "simple-mfd"; - reg = <0x0 0xfd5d0000 0x0 0x4000>; - #address-cells = <1>; - #size-cells = <1>; - - u2phy0: usb2phy@0 { - compatible = "rockchip,rk3588-usb2phy"; - reg = <0x0 0x10>; - #clock-cells = <0>; - clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>; - clock-names = "phyclk"; - clock-output-names = "usb480m_phy0"; - interrupts = <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH 0>; - resets = <&cru SRST_OTGPHY_U3_0>, <&cru SRST_P_USB2PHY_U3_0_GRF0>; - reset-names = "phy", "apb"; - status = "disabled"; - - u2phy0_otg: otg-port { - #phy-cells = <0>; - status = "disabled"; - }; - }; - }; - rng: rng@fe378000 { compatible = "rockchip,trngv1"; reg = <0x0 0xfe378000 0x0 0x200>; }; - - usbdp_phy0: phy@fed80000 { - compatible = "rockchip,rk3588-usbdp-phy"; - reg = <0x0 0xfed80000 0x0 0x10000>; - #phy-cells = <1>; - clocks = <&cru CLK_USBDPPHY_MIPIDCPPHY_REF>, - <&cru CLK_USBDP_PHY0_IMMORTAL>, - <&cru PCLK_USBDPPHY0>, - <&u2phy0>; - clock-names = "refclk", "immortal", "pclk", "utmi"; - resets = <&cru SRST_USBDP_COMBO_PHY0_INIT>, - <&cru SRST_USBDP_COMBO_PHY0_CMN>, - <&cru SRST_USBDP_COMBO_PHY0_LANE>, - <&cru SRST_USBDP_COMBO_PHY0_PCS>, - <&cru SRST_P_USBDPPHY0>; - reset-names = "init", "cmn", "lane", "pcs_apb", "pma_apb"; - rockchip,u2phy-grf = <&usb2phy0_grf>; - rockchip,usb-grf = <&usb_grf>; - rockchip,usbdpphy-grf = <&usbdpphy0_grf>; - rockchip,vo-grf = <&vo0_grf>; - status = "disabled"; - }; }; #ifdef CONFIG_ROCKCHIP_SPI_IMAGE
PATCH v4 10/10 board: rockchip: add ArmSoM Sige7 Rk3588 board
In reply to Jianfeng LiuArmSoM Sige7 is a Rockchip RK3588 based SBC (Single Board Computer) by ArmSoM.
There are two variants depending on the DRAM size : 8G and 16G.
Specification:
Rockchip Rk3588 SoC
4x ARM Cortex-A76, 4x ARM Cortex-A55
8/16GB memory LPDDR4x
Mali G610MC4 GPU
2x MIPI CSI 2 multiple lanes connector 64GB/128GB on board eMMC
uSD slot
1x USB 2.0 Type-A, 1x USB 3.0 Type-A, 1x USB 3.0 Type-C 1x HDMI 2.1 output
2x 2.5 Gbps Ethernet port
40-pin IO header including UART, SPI and I2C USB PD over USB Type-C
Size: 92mm x 62mm
Kernel commit:81c828a67c78 (arm64: dts: rockchip: Add ArmSom Sige7 board)
---
Changes in v4:
- Pick all commits of rk3588s.dtsi and rk3588.dtsi from v6.10-rc1-dts
- Remove obsolete USB3 DRD nodes in u-boot.dtsi of rk3588s/rk3588
- Remove sdhci and usb nodes from rk3588-armsom-sige7-u-boot.dtsi
Changes in v3:
- Use update-dts-subtree.sh to pick upstream dts
Changes in v2:
- Fix alphabetical order of MAINTAINERS
- Use arch/arm/dts/rk3588-armsom-sige7* in board MAINTAINERS
- Remove spi flash related config
- Move kernel dts to dts/upstream/src/arm64/rockchip/
MAINTAINERS | 1 + arch/arm/dts/rk3588-armsom-sige7-u-boot.dtsi | 6 ++ arch/arm/mach-rockchip/rk3588/Kconfig | 26 ++++++ board/armsom/sige7-rk3588/Kconfig | 12 +++ board/armsom/sige7-rk3588/MAINTAINERS | 7 ++ configs/sige7-rk3588_defconfig | 93 ++++++++++++++++++++ doc/board/rockchip/rockchip.rst | 1 + include/configs/sige7-rk3588.h | 15 ++++ 8 files changed, 161 insertions(+) create mode 100644 arch/arm/dts/rk3588-armsom-sige7-u-boot.dtsi create mode 100644 board/armsom/sige7-rk3588/Kconfig create mode 100644 board/armsom/sige7-rk3588/MAINTAINERS create mode 100644 configs/sige7-rk3588_defconfig create mode 100644 include/configs/sige7-rk3588.h
MAINTAINERS +1 -0
@@ -534,6 +534,7 @@ F: arch/arm/include/asm/arch-rockchip/ F: arch/arm/mach-rockchip/ F: board/amarula/vyasa-rk3288/ F: board/anbernic/rgxx3_rk3566/ +F: board/armsom/sige7-rk3588/ F: board/chipspark/popmetal_rk3288 F: board/engicam/px30_core/ F: board/firefly/
arch/arm/dts/rk3588-armsom-sige7-u-boot.dtsi new file +6 -0
@@ -0,0 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2024 ArmSoM Technology Co., Ltd. + */ + +#include "rk3588-u-boot.dtsi"
arch/arm/mach-rockchip/rk3588/Kconfig +26 -0
@@ -152,6 +152,31 @@ config TARGET_ROCK5B_RK3588 USB PD over USB Type-C Size: 100mm x 72mm (Pico-ITX form factor) +config TARGET_SIGE7_RK3588 + bool "ArmSoM Sige7 RK3588 board" + select BOARD_LATE_INIT + help + ArmSoM Sige7 is a Rockchip RK3588 based SBC (Single Board Computer) + by ArmSoM. + + There are two variants depending on the DRAM size : 8G and 16G. + + Specification: + + Rockchip Rk3588 SoC + 4x ARM Cortex-A76, 4x ARM Cortex-A55 + 8/16GB memory LPDDR4x + Mali G610MC4 GPU + 2x MIPI CSI 2 multiple lanes connector + 64GB/128GB on board eMMC + uSD slot + 1x USB 2.0 Type-A, 1x USB 3.0 Type-A, 1x USB 3.0 Type-C + 1x HDMI 2.1 output + 2x 2.5 Gbps Ethernet port + 40-pin IO header including UART, SPI and I2C + USB PD over USB Type-C + Size: 92mm x 62mm + config TARGET_QUARTZPRO64_RK3588 bool "Pine64 QuartzPro64 RK3588 board" select BOARD_LATE_INIT
@@ -221,6 +246,7 @@ config ROCKCHIP_COMMON_STACK_ADDR config TEXT_BASE default 0x00a00000 +source "board/armsom/sige7-rk3588/Kconfig" source "board/edgeble/neural-compute-module-6/Kconfig" source "board/friendlyelec/nanopc-t6-rk3588/Kconfig" source "board/pine64/quartzpro64-rk3588/Kconfig"
board/armsom/sige7-rk3588/Kconfig new file +12 -0
@@ -0,0 +1,12 @@ +if TARGET_SIGE7_RK3588 + +config SYS_BOARD + default "sige7-rk3588" + +config SYS_VENDOR + default "armsom" + +config SYS_CONFIG_NAME + default "sige7-rk3588" + +endif
board/armsom/sige7-rk3588/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +SIGE7-RK3588 +M: Jianfeng Liu <[email protected]> +S: Maintained +F: board/armsom/sige7-rk3588 +F: include/configs/sige7-rk3588.h +F: configs/sige7-rk3588_defconfig +F: arch/arm/dts/rk3588-armsom-sige7*
configs/sige7-rk3588_defconfig new file +93 -0
93 lines not on this page · raw message
doc/board/rockchip/rockchip.rst +1 -0
@@ -118,6 +118,7 @@ List of mainline supported Rockchip boards: - Radxa ROCK 3 Model A (rock-3a-rk3568) * rk3588 + - ArmSoM Sige7 (sige7-rk3588) - Rockchip EVB (evb-rk3588) - Edgeble Neural Compute Module 6A SoM - Neu6a (neu6a-io-rk3588) - Edgeble Neural Compute Module 6B SoM - Neu6b (neu6b-io-rk3588)
include/configs/sige7-rk3588.h new file +15 -0
@@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* +* Copyright (c) 2024 ArmSoM Technology Co., Ltd. +*/ + +#ifndef __SIGE7_RK3588_H +#define __SIGE7_RK3588_H + +#define ROCKCHIP_DEVICE_SETTINGS \ + "stdout=serial,vidconsole\0" \ + "stderr=serial,vidconsole\0" + +#include <configs/rk3588_common.h> + +#endif /* __SIGE7_RK3588_H */
Signature · 1 line
2.34.1
Re: [PATCH v4 10/10] board: rockchip: add ArmSoM Sige7 Rk3588 board
Quoted 21 lines · Jianfeng Liu
ArmSoM Sige7 is a Rockchip RK3588 based SBC (Single Board Computer) by ArmSoM.
There are two variants depending on the DRAM size : 8G and 16G.
Specification:
Rockchip Rk3588 SoC
4x ARM Cortex-A76, 4x ARM Cortex-A55
8/16GB memory LPDDR4x
Mali G610MC4 GPU
2x MIPI CSI 2 multiple lanes connector 64GB/128GB on board eMMC
uSD slot
1x USB 2.0 Type-A, 1x USB 3.0 Type-A, 1x USB 3.0 Type-C 1x HDMI 2.1 output
2x 2.5 Gbps Ethernet port
40-pin IO header including UART, SPI and I2C USB PD over USB Type-C
Size: 92mm x 62mm
Quoted 4 lines
Kernel commit:
81c828a67c78(arm64: dts: rockchip: Add ArmSom Sige7 board)Signed-off-by Jianfeng Liu <[email protected]>
Thanks,
- Kever
Quoted 262 lines
---
Changes in v4:
- Pick all commits ofrk3588s.dtsiandrk3588.dtsifrom v6.10-rc1-dts
- Remove obsolete USB3 DRD nodes inu-boot.dtsiof rk3588s/rk3588
- Remove sdhci and usb nodes fromrk3588-armsom-sige7-u-boot.dtsiChanges in v3:
- Useupdate-dts-subtree.shto pick upstream dtsChanges in v2:
- Fix alphabetical order ofMAINTAINERS
- Usearch/arm/dts/rk3588-armsom-sige7*in boardMAINTAINERS
- Remove spi flash related config
- Move kernel dts to dts/upstream/src/arm64/rockchip/MAINTAINERS | 1 + arch/arm/dts/rk3588-armsom-sige7-u-boot.dtsi | 6 ++ arch/arm/mach-rockchip/rk3588/Kconfig | 26 ++++++ board/armsom/sige7-rk3588/Kconfig | 12 +++ board/armsom/sige7-rk3588/MAINTAINERS | 7 ++ configs/sige7-rk3588_defconfig | 93 ++++++++++++++++++++ doc/board/rockchip/rockchip.rst | 1 + include/configs/sige7-rk3588.h | 15 ++++ 8 files changed, 161 insertions(+)create mode 100644
arch/arm/dts/rk3588-armsom-sige7-u-boot.dtsicreate mode 100644 board/armsom/sige7-rk3588/Kconfig create mode 100644 board/armsom/sige7-rk3588/MAINTAINERS create mode 100644 configs/sige7-rk3588_defconfig create mode 100644include/configs/sige7-rk3588.hMAINTAINERS +1
-0@@ -534,6 +534,7 @@ F: arch/arm/include/asm/arch-rockchip/ F: arch/arm/mach-rockchip/ F: board/amarula/vyasa-rk3288/ F: board/anbernic/rgxx3_rk3566/ +F: board/armsom/sige7-rk3588/ F: board/chipspark/popmetal_rk3288 F: board/engicam/px30_core/ F: board/firefly/arch/arm/dts/rk3588-armsom-sige7-u-boot.dtsi new file +6
-0@@ -0,0 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2024 ArmSoM Technology Co., Ltd. + */ + +#include "rk3588-u-boot.dtsi"arch/arm/mach-rockchip/rk3588/Kconfig +26
-0@@ -152,6 +152,31 @@ config TARGET_ROCK5B_RK3588 USB PD over USB Type-C Size: 100mm x 72mm (Pico-ITX form factor) +config TARGET_SIGE7_RK3588 + bool "ArmSoM Sige7 RK3588 board" + select BOARD_LATE_INIT + help + ArmSoM Sige7 is a Rockchip RK3588 based SBC (Single Board Computer) + by ArmSoM. + + There are two variants depending on the DRAM size : 8G and 16G. + + Specification: + + Rockchip Rk3588 SoC + 4x ARM Cortex-A76, 4x ARM Cortex-A55 + 8/16GB memory LPDDR4x + Mali G610MC4 GPU + 2x MIPI CSI 2 multiple lanes connector + 64GB/128GB on board eMMC + uSD slot + 1x USB 2.0 Type-A, 1x USB 3.0 Type-A, 1x USB 3.0 Type-C + 1x HDMI 2.1 output + 2x 2.5 Gbps Ethernet port + 40-pin IO header including UART, SPI and I2C + USB PD over USB Type-C + Size: 92mm x 62mm + config TARGET_QUARTZPRO64_RK3588 bool "Pine64 QuartzPro64 RK3588 board" select BOARD_LATE_INIT@@ -221,6 +246,7 @@ config ROCKCHIP_COMMON_STACK_ADDR config TEXT_BASE default 0x00a00000 +source "board/armsom/sige7-rk3588/Kconfig" source "board/edgeble/neural-compute-module-6/Kconfig" source "board/friendlyelec/nanopc-t6-rk3588/Kconfig" source "board/pine64/quartzpro64-rk3588/Kconfig"board/armsom/sige7-rk3588/Kconfig new file +12
-0@@ -0,0 +1,12 @@ +if TARGET_SIGE7_RK3588 + +config SYS_BOARD + default "sige7-rk3588" + +config SYS_VENDOR + default "armsom" + +config SYS_CONFIG_NAME + default "sige7-rk3588" + +endifboard/armsom/sige7-rk3588/MAINTAINERS new file +7
-0@@ -0,0 +1,7 @@ +SIGE7-RK3588 +M: Jianfeng Liu <[email protected]> +S: Maintained +F: board/armsom/sige7-rk3588 +F: include/configs/sige7-rk3588.h +F: configs/sige7-rk3588_defconfig +F: arch/arm/dts/rk3588-armsom-sige7*configs/sige7-rk3588_defconfig new file +93
-0@@ -0,0 +1,93 @@ +CONFIG_ARM=y +CONFIG_SKIP_LOWLEVEL_INIT=y +CONFIG_SYS_HAS_NONCACHED_MEMORY=y +CONFIG_COUNTER_FREQUENCY=24000000 +CONFIG_ARCH_ROCKCHIP=y +CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3588-armsom-sige7" +CONFIG_ROCKCHIP_RK3588=y +CONFIG_SPL_SERIAL=y +CONFIG_TARGET_SIGE7_RK3588=y +CONFIG_DEBUG_UART_BASE=0xFEB50000 +CONFIG_DEBUG_UART_CLOCK=24000000 +CONFIG_SPL_SPI=y +CONFIG_SYS_LOAD_ADDR=0xc00800 +CONFIG_PCI=y +CONFIG_DEBUG_UART=y +CONFIG_AHCI=y +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_SPL_FIT_SIGNATURE=y +CONFIG_SPL_LOAD_FIT=y +CONFIG_LEGACY_IMAGE_FORMAT=y +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3588-armsom-sige7.dtb" +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_MAX_SIZE=0x40000 +CONFIG_SPL_PAD_TO=0x7f8000 +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +CONFIG_SPL_ATF=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y +CONFIG_CMD_USB=y +CONFIG_CMD_ROCKUSB=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_REGULATOR=y +# CONFIG_SPL_DOS_PARTITION is not set +CONFIG_SPL_OF_CONTROL=y +CONFIG_OF_LIVE=y +CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" +CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_SPL_REGMAP=y +CONFIG_SPL_SYSCON=y +CONFIG_AHCI_PCI=y +CONFIG_DWC_AHCI=y +CONFIG_SPL_CLK=y +# CONFIG_USB_FUNCTION_FASTBOOT is not set +CONFIG_ROCKCHIP_GPIO=y +CONFIG_SYS_I2C_ROCKCHIP=y +CONFIG_MISC=y +CONFIG_SUPPORT_EMMC_RPMB=y +CONFIG_MMC_DW=y +CONFIG_MMC_DW_ROCKCHIP=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_SDMA=y +CONFIG_MMC_SDHCI_ROCKCHIP=y +CONFIG_PHYLIB=y +CONFIG_RTL8169=y +CONFIG_NVME_PCI=y +CONFIG_PCIE_DW_ROCKCHIP=y +CONFIG_PHY_ROCKCHIP_INNO_USB2=y +CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y +CONFIG_PHY_ROCKCHIP_USBDP=y +CONFIG_SPL_PINCTRL=y +CONFIG_PWM_ROCKCHIP=y +CONFIG_SPL_RAM=y +CONFIG_SCSI=y +CONFIG_BAUDRATE=1500000 +CONFIG_DEBUG_UART_SHIFT=2 +CONFIG_SYS_NS16550_MEM32=y +CONFIG_SYSRESET=y +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_GENERIC=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_GENERIC=y +CONFIG_USB_DWC3=y +CONFIG_USB_DWC3_GENERIC=y +CONFIG_SPL_USB_DWC3_GENERIC=y +CONFIG_USB_HOST_ETHER=y +CONFIG_USB_ETHER_ASIX=y +CONFIG_USB_ETHER_ASIX88179=y +CONFIG_USB_ETHER_LAN75XX=y +CONFIG_USB_ETHER_LAN78XX=y +CONFIG_USB_ETHER_MCS7830=y +CONFIG_USB_ETHER_RTL8152=y +CONFIG_USB_ETHER_SMSC95XX=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_USB_FUNCTION_ROCKUSB=y +CONFIG_ERRNO_STR=ydoc/board/rockchip/rockchip.rst +1
-0@@ -118,6 +118,7 @@ List of mainline supported Rockchip boards: - Radxa ROCK 3 Model A (rock-3a-rk3568) * rk3588 + - ArmSoM Sige7 (sige7-rk3588) - Rockchip EVB (evb-rk3588) - Edgeble Neural Compute Module 6A SoM - Neu6a (neu6a-io-rk3588) - Edgeble Neural Compute Module 6B SoM - Neu6b (neu6b-io-rk3588)include/configs/sige7-rk3588.h new file +15
-0@@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* +* Copyright (c) 2024 ArmSoM Technology Co., Ltd. +*/ + +#ifndef __SIGE7_RK3588_H +#define __SIGE7_RK3588_H + +#define ROCKCHIP_DEVICE_SETTINGS \ + "stdout=serial,vidconsole\0" \ + "stderr=serial,vidconsole\0" + +#include <configs/rk3588_common.h> + +#endif /* __SIGE7_RK3588_H */
Hi Jianfeng,
Quoted 32 lines · Jianfeng Liu
This series also introduces dts commits of
rk3588s.dtsiandrk3588.dtsifrom v6.10-rc1-dts.
Then dts of ArmSoM Sige7 is picked from upstream.
I also remove obsolete usb3 nodes ofrk3588-u-boot.dtsiandrk3588-u-boot.dtsi.Changes in v4:
- Pick all commits ofrk3588s.dtsiandrk3588.dtsifrom v6.10-rc1-dts
- Remove obsolete USB3 DRD nodes inu-boot.dtsiof rk3588s/rk3588
- Remove sdhci and usb nodes fromrk3588-armsom-sige7-u-boot.dtsiChanges in v3:
- Useupdate-dts-subtree.shto pick upstream dtsChanges in v2:
- Fix alphabetical order ofMAINTAINERS
- Usearch/arm/dts/rk3588-armsom-sige7*in boardMAINTAINERS
- Remove spi flash related config
- Move kernel dts to dts/upstream/src/arm64/rockchip/Boris Brezillon (1):
arm64: dts: rockchip: Add rk3588 GPU nodeDiederik de Haas (1):
arm64: dts: rockchip: Fix ordering of nodes on rk3588sJianfeng Liu (3):
arm64: dts: rockchip: Add ArmSom Sige7 board
rockchip: rk3588: Remove USB3 DRD nodes inu-boot.dtsi
board: rockchip: add ArmSoM Sige7 Rk3588 board
Quoted 9 lines
Niklas Cassel (1):
arm64: dts: rockchip: add rk3588 pcie and php IOMMUsSebastian Reichel (4):
arm64: dts: rockchip: fix usb2phy nodename for rk3588
arm64: dts: rockchip: reorder usb2phy properties for rk3588
arm64: dts: rockchip: add USBDP phys on rk3588
arm64: dts: rockchip: add USB3 DRD controllers on rk3588
Nice to see cherry pick from subtree worked as expected for you.
FWIW, for the series:
-Sumit
Quoted 24 lines
MAINTAINERS | 1 + arch/arm/dts/rk3588-armsom-sige7-u-boot.dtsi | 6 + arch/arm/dts/rk3588-u-boot.dtsi | 74 -- arch/arm/dts/rk3588s-u-boot.dtsi | 85 --- arch/arm/mach-rockchip/rk3588/Kconfig | 26 + board/armsom/sige7-rk3588/Kconfig | 12 + board/armsom/sige7-rk3588/MAINTAINERS | 7 + configs/sige7-rk3588_defconfig | 93 +++ doc/board/rockchip/rockchip.rst | 1 + .../arm64/rockchip/rk3588-armsom-sige7.dts | 721 ++++++++++++++++++ dts/upstream/src/arm64/rockchip/rk3588.dtsi | 72 ++ dts/upstream/src/arm64/rockchip/rk3588s.dtsi | 377 ++++++--- include/configs/sige7-rk3588.h | 15 + 13 files changed, 1225 insertions(+), 265 deletions(-) create mode 100644 arch/arm/dts/rk3588-armsom-sige7-u-boot.dtsi create mode 100644 board/armsom/sige7-rk3588/Kconfig create mode 100644 board/armsom/sige7-rk3588/MAINTAINERS create mode 100644 configs/sige7-rk3588_defconfig create mode 100644 dts/upstream/src/arm64/rockchip/rk3588-armsom-sige7.dts create mode 100644 include/configs/sige7-rk3588.h--
2.34.1
Hi Jianfeng,
For the whole series:
Thanks!
Quentin
Quoted 61 lines · Jianfeng Liu
This series also introduces dts commits of
rk3588s.dtsiandrk3588.dtsifrom v6.10-rc1-dts.
Then dts of ArmSoM Sige7 is picked from upstream.
I also remove obsolete usb3 nodes ofrk3588-u-boot.dtsiandrk3588-u-boot.dtsi.Changes in v4:
- Pick all commits ofrk3588s.dtsiandrk3588.dtsifrom v6.10-rc1-dts
- Remove obsolete USB3 DRD nodes inu-boot.dtsiof rk3588s/rk3588
- Remove sdhci and usb nodes fromrk3588-armsom-sige7-u-boot.dtsiChanges in v3:
- Useupdate-dts-subtree.shto pick upstream dtsChanges in v2:
- Fix alphabetical order ofMAINTAINERS
- Usearch/arm/dts/rk3588-armsom-sige7*in boardMAINTAINERS
- Remove spi flash related config
- Move kernel dts to dts/upstream/src/arm64/rockchip/Boris Brezillon (1):
arm64: dts: rockchip: Add rk3588 GPU nodeDiederik de Haas (1):
arm64: dts: rockchip: Fix ordering of nodes on rk3588sJianfeng Liu (3):
arm64: dts: rockchip: Add ArmSom Sige7 board
rockchip: rk3588: Remove USB3 DRD nodes inu-boot.dtsi
board: rockchip: add ArmSoM Sige7 Rk3588 boardNiklas Cassel (1):
arm64: dts: rockchip: add rk3588 pcie and php IOMMUsSebastian Reichel (4):
arm64: dts: rockchip: fix usb2phy nodename for rk3588
arm64: dts: rockchip: reorder usb2phy properties for rk3588
arm64: dts: rockchip: add USBDP phys on rk3588
arm64: dts: rockchip: add USB3 DRD controllers on rk3588MAINTAINERS | 1 + arch/arm/dts/rk3588-armsom-sige7-u-boot.dtsi | 6 + arch/arm/dts/rk3588-u-boot.dtsi | 74 -- arch/arm/dts/rk3588s-u-boot.dtsi | 85 --- arch/arm/mach-rockchip/rk3588/Kconfig | 26 + board/armsom/sige7-rk3588/Kconfig | 12 + board/armsom/sige7-rk3588/MAINTAINERS | 7 + configs/sige7-rk3588_defconfig | 93 +++ doc/board/rockchip/rockchip.rst | 1 + .../arm64/rockchip/rk3588-armsom-sige7.dts | 721 ++++++++++++++++++ dts/upstream/src/arm64/rockchip/rk3588.dtsi | 72 ++ dts/upstream/src/arm64/rockchip/rk3588s.dtsi | 377 ++++++--- include/configs/sige7-rk3588.h | 15 + 13 files changed, 1225 insertions(+), 265 deletions(-)create mode 100644
arch/arm/dts/rk3588-armsom-sige7-u-boot.dtsicreate mode 100644 board/armsom/sige7-rk3588/Kconfig
create mode 100644 board/armsom/sige7-rk3588/MAINTAINERS create mode 100644 configs/sige7-rk3588_defconfig
create mode 100644dts/upstream/src/arm64/rockchip/rk3588-armsom-sige7.dtscreate mode 100644include/configs/sige7-rk3588.h