leak fixes for sparse-checkout code
cover leak fixes for sparse-checkout code
So Patrick nerd-sniped me by asking if my earlier leakfix for git-mv was triggered by the test suite. It was, in t7002, but that wasn't enough to make the script leak-free. So I figured, how hard could it be to go all the way?
Well. It only took a few patches (1-5), but in the process I stumbled on a rather tricky interface oddity of add_pattern(), which caused some other leaks. The interface is fixed in patch 6, and the matching leak goes away in patch 7. Of course, I wanted to make sure it was tested, so after poking around I found that t1091 triggered it.
But as you might guess, that didn't make t1091 leak-free. And I couldn't bear leaving it on a cliffhanger like that, so patches 8-13 fix the rest of the issues triggered by that script.
And along the way we managed to make t1090 and t3602 leak-free, too (actually in patch 2, but I didn't notice until the whole thing was done).
These should apply on top of jk/leakfixes, since the leak-freeness of t7002 depends on the fix there.
[01/13]: sparse-checkout: free string list in write_cone_to_file() [02/13]: sparse-checkout: pass string literals directly to add_pattern() [03/13]: dir.c: free strings in sparse cone pattern hashmaps [04/13]: sparse-checkout: clear patterns when init() sees existing sparse file [05/13]: dir.c: free removed sparse-pattern hashmap entries [06/13]: dir.c: always copy input to add_pattern()
[07/13]: sparse-checkout: reuse --stdin buffer when reading patterns [08/13]: sparse-checkout: always free "line" strbuf after reading input [09/13]: sparse-checkout: refactor temporary sparse_checkout_patterns [10/13]: sparse-checkout: free sparse_filename after use
[11/13]: sparse-checkout: free pattern list in sparse_checkout_list() [12/13]: sparse-checkout: free string list after displaying [13/13]: sparse-checkout: free duplicate hashmap entries
builtin/sparse-checkout.c | 49 +++++++++++++++++++----------- dir.c | 42 ++++++++++++++++--------- dir.h | 3 +- t/t1090-sparse-checkout-scope.sh | 1 + t/t1091-sparse-checkout-builtin.sh | 1 + t/t3602-rm-sparse-checkout.sh | 1 + t/t7002-mv-sparse-checkout.sh | 1 + 7 files changed, 65 insertions(+), 33 deletions(-)
-Peff
PATCH 1/13 sparse-checkout: free string list in write_cone_to_file()
We use a string list to hold sorted and de-duped patterns, but don't free it before leaving the function, causing a leak.
This drops the number of leaks found in t7002 from 27 to 25.
--- builtin/sparse-checkout.c | 2 ++ 1 file changed, 2 insertions(+)
builtin/sparse-checkout.c +2 -0
@@ -311,6 +311,8 @@ static void write_cone_to_file(FILE *fp, struct pattern_list *pl)fprintf (fp,"%s/\n" , pattern);free (pattern); } + +string_list_clear (&sl,0 ); }static int write_patterns_and_update (struct pattern_list *pl)
Signature · 1 line
2.45.1.727.ge984192922
PATCH 2/13 sparse-checkout: pass string literals directly to add_pattern()
In reply to Jeff KingThe add_pattern() function takes a pattern string, but neither makes a copy of it nor takes ownership of the memory. So it is the caller's responsibility to make sure the string hangs around as long as the pattern_list which references it.
There are a few cases in sparse-checkout where we use string literal patterns by stuffing them into a strbuf, detaching the buffer, and then passing the result into add_pattern(). This creates a leak when the pattern_list is eventually cleared, since we don't retain a copy of the detached buffer to free.
But we can observe that the whole strbuf dance is unnecessary. The point was presumably[1] to satisfy the lifetime requirement of the string. But string literals have static duration; we can count on them lasting for the whole program.
So we can fix the leak by just passing them directly. And as a bonus, that simplifies the code. The leaks can be seen in t7002, which drops from 25 leaks to 22 with this patch. It also makes t3602 and t1090 leak-free.
In the long run, we will also want to clean up this (undocumented!) memory lifetime requirement of add_pattern(). But that can come in a later patch; passing the string literals directly will be the right thing either way.
[1] The code in question comes from 416adc8711 (sparse-checkout: update working directory in-process for 'init', 2019-11-21) and 99dfa6f970 (sparse-checkout: use in-process update for disable subcommand, 2019-11-21), but I didn't see anything in their commit messages or on the list explaining the strbufs.
--- builtin/sparse-checkout.c | 11 +++-------- t/t1090-sparse-checkout-scope.sh | 1 + t/t3602-rm-sparse-checkout.sh | 1 + 3 files changed, 5 insertions(+), 8 deletions(-)
builtin/sparse-checkout.c +3 -8
@@ -442,7 +442,6 @@ static int sparse_checkout_init(int argc, const char **argv, const char *prefix)char *sparse_filename;int res;struct object_id oid; -struct strbuf pattern =STRBUF_INIT ;static struct option builtin_sparse_checkout_init_options[] = { OPT_BOOL(0, "cone", &init_opts.cone_mode,
@@ -493,10 +492,8 @@ static int sparse_checkout_init(int argc, const char **argv, const char *prefix)return 0 ; } -strbuf_addstr (&pattern,"/*" ); -add_pattern (strbuf_detach (&pattern,NULL ), empty_base,0 , &pl,0 ); -strbuf_addstr (&pattern,"!/*/" ); -add_pattern (strbuf_detach (&pattern,NULL ), empty_base,0 , &pl,0 ); +add_pattern ("/*" , empty_base,0 , &pl,0 ); +add_pattern ("!/*/" , empty_base,0 , &pl,0 ); pl.use_cone_patterns = init_opts.cone_mode;return write_patterns_and_update (&pl);
@@ -893,7 +890,6 @@ static int sparse_checkout_disable(int argc, const char **argv, OPT_END(), };struct pattern_list pl; -struct strbuf match_all =STRBUF_INIT ;/* * We do not exit early if !core_apply_sparse_checkout; due to the
@@ -919,8 +915,7 @@ static int sparse_checkout_disable(int argc, const char **argv, pl.use_cone_patterns =0 ; core_apply_sparse_checkout =1 ; -strbuf_addstr (&match_all,"/*" ); -add_pattern (strbuf_detach (&match_all,NULL ), empty_base,0 , &pl,0 ); +add_pattern ("/*" , empty_base,0 , &pl,0 );prepare_repo_settings (the_repository); the_repository->settings.sparse_index =0 ;
t/t1090-sparse-checkout-scope.sh +1 -0
@@ -6,6 +6,7 @@ GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME TEST_CREATE_REPO_NO_TEMPLATE=1 +TEST_PASSES_SANITIZE_LEAK=true . ./test-lib.sh test_expect_success 'setup' '
t/t3602-rm-sparse-checkout.sh +1 -0
@@ -2,6 +2,7 @@ test_description='git rm in sparse checked out working trees' +TEST_PASSES_SANITIZE_LEAK=true . ./test-lib.sh test_expect_success 'setup' "
Signature · 1 line
2.45.1.727.ge984192922
Re: [PATCH 02/13] sparse-checkout: pass string literals directly to add_pattern()
Quoted 4 lines · Jeff King
The
add_pattern()function takes a pattern string, but neither makes a copy of it nor takes ownership of the memory. So it is the caller's responsibility to make sure the string hangs around as long as thepattern_listwhich references it.
Wow. That's an extremely bad API.
I suspect that it long time ago did not aggressively "pre-parse" the given pattern string and kept the original copy in the struct (i.e., taking ownership), and these copies of the literal strings were made at the calling sites with the expectation that the API takes ownership of them, as most of the strings fed to add_pattern() are what we read from the environment into heap.
Quoted 4 lines
In the long run, we will also want to clean up this (undocumented!) memory lifetime requirement of
add_pattern(). But that can come in a later patch; passing the string literals directly will be the right thing either way.
OK.
Re: [PATCH 02/13] sparse-checkout: pass string literals directly to add_pattern()
Quoted 7 lines · Junio C Hamano
Quoted 4 lines · Jeff King
The
add_pattern()function takes a pattern string, but neither makes a copy of it nor takes ownership of the memory. So it is the caller's responsibility to make sure the string hangs around as long as thepattern_listwhich references it.
Quoted 8 lines
Wow. That's an extremely bad API.
I suspect that it long time ago did not aggressively "pre-parse" the given pattern string and kept the original copy in the struct (i.e., taking ownership), and these copies of the literal strings were made at the calling sites with the expectation that the API takes ownership of them, as most of the strings fed to
add_pattern()are what we read from the environment into heap.
Yeah, I actually dug into the history a bit but didn't find any real smoking gun of when it crossed the line to "horrible". It was gradual. ;)
But yes, it was originally just an array of the pattern strings (in 2005!), and then grew more features, and then grew more of an interface for adding patterns from other sources, and so on. I'm mildly surprised nobody ran afoul of it before now.
-Peff
PATCH 3/13 dir.c: free strings in sparse cone pattern hashmaps
In reply to Jeff KingThe pattern_list structs used for cone-mode sparse lookups use a few extra hashmaps. These store pattern_entry structs, each of which has its own heap-allocated pattern string. When we clean up the hashmaps, we free the individual pattern_entry structs, but forget to clean up the embedded strings, causing memory leaks.
We can fix this by iterating over the hashmaps to free the extra strings. This reduces the numbers of leaks in t7002 from 22 to 9.
One alternative here would be to make the string a FLEX_ARRAY member of the pattern_entry. Then there's no extra free() required, and as a bonus it would be a little more efficient. However, some of the refactoring gets awkward, as we are often assigning strings allocated by helper functions. So let's just fix the leak for now, and we can explore bigger refactoring separately.
--- dir.c | 19 +++++++++++++++---- 1 file changed, 15 insertions(+), 4 deletions(-)
dir.c +15 -4
@@ -726,6 +726,17 @@ static char *dup_and_filter_pattern(const char *pattern)return result; } +static void clear_pattern_entry_hashmap (struct hashmap *map) +{ +struct hashmap_iter iter; +struct pattern_entry *entry; + +hashmap_for_each_entry (map, &iter, entry, ent) { +free (entry->pattern); + } + hashmap_clear_and_free(map, struct pattern_entry, ent); +} +static void add_pattern_to_hashsets (struct pattern_list *pl,struct path_pattern *given) {struct pattern_entry *translated;
@@ -855,8 +866,8 @@ static void add_pattern_to_hashsets(struct pattern_list *pl, struct path_pattern clear_hashmaps:warning (_ ("disabling cone pattern matching" )); - hashmap_clear_and_free(&pl->parent_hashmap, struct pattern_entry, ent); - hashmap_clear_and_free(&pl->recursive_hashmap, struct pattern_entry, ent); +clear_pattern_entry_hashmap (&pl->recursive_hashmap); +clear_pattern_entry_hashmap (&pl->parent_hashmap); pl->use_cone_patterns =0 ; }
@@ -956,8 +967,8 @@ void clear_pattern_list(struct pattern_list *pl)free (pl->patterns[i]);free (pl->patterns);free (pl->filebuf); - hashmap_clear_and_free(&pl->recursive_hashmap, struct pattern_entry, ent); - hashmap_clear_and_free(&pl->parent_hashmap, struct pattern_entry, ent); +clear_pattern_entry_hashmap (&pl->recursive_hashmap); +clear_pattern_entry_hashmap (&pl->parent_hashmap);memset (pl,0 ,sizeof (*pl)); }
Signature · 1 line
2.45.1.727.ge984192922
PATCH 4/13 sparse-checkout: clear patterns when init() sees existing sparse file
In reply to Jeff KingIn sparse_checkout_init(), we first try to load patterns from an existing file. If we found any, we return immediately, but end up leaking the patterns we parsed. Fixing this reduces the number of leaks in t7002 from 9 down to 5.
Note that there are two other exits from the function, but they don't need the same treatment:
- if we can't resolve HEAD, we write out a hard-coded sparse file and return. But we know the pattern list is empty there, since we didn't find any in the on-disk file and we haven't yet added any of our own.
- otherwise, we do populate the list and then tail-call into write_patterns_and_update(). But that function frees the pattern_list itself, so we don't need to.
--- builtin/sparse-checkout.c | 1 + 1 file changed, 1 insertion(+)
builtin/sparse-checkout.c +1 -0
@@ -472,6 +472,7 @@ static int sparse_checkout_init(int argc, const char **argv, const char *prefix)/* If we already have a sparse-checkout file, use it. */ if (res >=0 ) {free (sparse_filename); +clear_pattern_list (&pl);return update_working_directory (NULL ); }
Signature · 1 line
2.45.1.727.ge984192922
PATCH 5/13 dir.c: free removed sparse-pattern hashmap entries
In reply to Jeff KingIn add_pattern_to_hashsets(), we remove entries from the recursive_hashmap when adding similar ones to the parent_hashmap. I won't pretend to understand all of what's going on here, but there's an obvious leak: whatever we removed from recursive_hashmap is not referenced anywhere else, and is never free()d.
We can easily fix this by asking the hashmap to return a pointer to the old entry. This makes t7002 now completely leak-free.
--- dir.c | 8 +++++++- t/t7002-mv-sparse-checkout.sh | 1 + 2 files changed, 8 insertions(+), 1 deletion(-)
dir.c +7 -1
@@ -810,6 +810,8 @@ static void add_pattern_to_hashsets(struct pattern_list *pl, struct path_patternif (given->patternlen >2 && !strcmp (given->pattern + given->patternlen -2 ,"/*" )) { +struct pattern_entry *old; +if (!(given->flags &PATTERN_FLAG_NEGATIVE )) {/* Not a cone pattern. */ warning (_ ("unrecognized pattern: '%s'" ), given->pattern);
@@ -835,7 +837,11 @@ static void add_pattern_to_hashsets(struct pattern_list *pl, struct path_pattern }hashmap_add (&pl->parent_hashmap, &translated->ent); -hashmap_remove (&pl->recursive_hashmap, &translated->ent, &data); + old =hashmap_remove_entry (&pl->recursive_hashmap, translated, ent, &data); +if (old) { +free (old->pattern); +free (old); + }free (data);return ; }
t/t7002-mv-sparse-checkout.sh +1 -0
@@ -2,6 +2,7 @@ test_description='git mv in sparse working trees' +TEST_PASSES_SANITIZE_LEAK=true . ./test-lib.sh setup_sparse_checkout () {
Signature · 1 line
2.45.1.727.ge984192922
PATCH 6/13 dir.c: always copy input to add_pattern()
In reply to Jeff KingThe add_pattern() function has a subtle and undocumented gotcha: the pattern string you pass in must remain valid as long as the pattern_list is in use (and nor do we take ownership of it). This is easy to get wrong, causing either subtle bugs (because you free or reuse the string buffer) or leaks (because you copy the string, but don't track ownership separately).
All of this "pattern" code was originally the "exclude" mechanism. So this _usually_ works OK because you add entries in one of two ways:
1. From the command-line (e.g., "--exclude"), in which case we're pointing to an argv entry which remains valid for the lifetime of the program.
2. From a file (e.g., ".gitignore"), in which case we read the whole file into a buffer, attach it to the pattern_list's "filebuf" entry, then parse the buffer in-place (adding NULs). The strings point into the filebuf, which is cleaned up when the whole pattern_list goes away.
But other code, like sparse-checkout, reads individual lines from stdin and passes them one by one to add_pattern(), leaking each. We could fix this by refactoring it to take in the whole buffer at once, like (2) above, and stuff it in "filebuf". But given how subtle the interface is, let's just fix it to always copy the string.
That seems at first like we'd be wasting extra memory, but we can mitigate that:
a. The path_pattern struct already uses a FLEXPTR, since we sometimes
make a copy (when we see "foo/", we strip off the trailing slash, requiring a modifiable copy of the string).
Since we'll now always embed the string inside the struct, we can switch to the regular FLEX_ARRAY pattern, saving us 8 bytes of pointer. So patterns with a trailing slash and ones under 8 bytes actually get smaller.
b. Now that we don't need the original string to hang around, we can
get rid of the "filebuf" mechanism entirely, and just free the file contents after parsing. Since files are the sources we'd expect to have the largest pattern sets, we should mostly break even on stuffing the same data into the individual structs.
This patch just adjusts the add_pattern() interface; it doesn't fix any leaky callers yet.
--- dir.c | 15 +++++---------- dir.h | 3 ++- 2 files changed, 7 insertions(+), 11 deletions(-)
dir.c +5 -10
@@ -925,12 +925,7 @@ void add_pattern(const char *string, const char *base,int nowildcardlen;parse_path_pattern (&string, &patternlen, &flags, &nowildcardlen); -if (flags &PATTERN_FLAG_MUSTBEDIR ) { -FLEXPTR_ALLOC_MEM (pattern, pattern, string, patternlen); - }else { - pattern =xmalloc (sizeof (*pattern)); - pattern->pattern = string; - } +FLEX_ALLOC_MEM (pattern, pattern, string, patternlen); pattern->patternlen = patternlen; pattern->nowildcardlen = nowildcardlen; pattern->base = base;
@@ -972,7 +967,6 @@ void clear_pattern_list(struct pattern_list *pl)for (i =0 ; i < pl->nr; i++)free (pl->patterns[i]);free (pl->patterns); -free (pl->filebuf);clear_pattern_entry_hashmap (&pl->recursive_hashmap);clear_pattern_entry_hashmap (&pl->parent_hashmap);
@@ -1166,23 +1160,23 @@ static int add_patterns(const char *fname, const char *base, int baselen, }add_patterns_from_buffer (buf, size, base, baselen, pl); +free (buf);return 0 ; }static int add_patterns_from_buffer (char *buf,size_t size,const char *base,int baselen,struct pattern_list *pl) { +char *orig = buf;int i, lineno =1 ;char *entry;hashmap_init (&pl->recursive_hashmap, pl_hashmap_cmp,NULL ,0 );hashmap_init (&pl->parent_hashmap, pl_hashmap_cmp,NULL ,0 ); - pl->filebuf = buf; -if (skip_utf8_bom (&buf, size)) - size -= buf - pl->filebuf; + size -= buf - orig; entry = buf;
@@ -1222,6 +1216,7 @@ int add_patterns_from_blob_to_list(return r;add_patterns_from_buffer (buf, size, base, baselen, pl); +free (buf);return 0 ; }
dir.h +2 -1
@@ -62,7 +62,6 @@ struct path_pattern {*/ struct pattern_list *pl; -const char *pattern;int patternlen;int nowildcardlen;const char *base;
@@ -74,6 +73,8 @@ struct path_pattern {* and from -1 decrementing for patterns from CLI args. */ int srcpos; + +char pattern[FLEX_ARRAY ]; };/* used for hashmaps for cone patterns */
Signature · 1 line
2.45.1.727.ge984192922
Re: [PATCH 06/13] dir.c: always copy input to add_pattern()
Quoted 5 lines · Jeff King
b. Now that we don't need the original string to hang around, we can
get rid of the "filebuf" mechanism entirely, and just free the file contents after parsing. Since files are the sources we'd expect to have the largest pattern sets, we should mostly break even on stuffing the same data into the individual structs.
;-).
Quoted 8 lines
dir.c +0
-0@@ -925,12 +925,7 @@ void add_pattern(const char *string, const char *base,int nowildcardlen;parse_path_pattern (&string, &patternlen, &flags, &nowildcardlen);
dir.c void add_pattern(const char *string, const char *base, · line 931
Quoted 10 lines
dir.c +1
-6-if (flags &PATTERN_FLAG_MUSTBEDIR ) { -FLEXPTR_ALLOC_MEM (pattern, pattern, string, patternlen); - }else { - pattern =xmalloc (sizeof (*pattern)); - pattern->pattern = string; - } +FLEX_ALLOC_MEM (pattern, pattern, string, patternlen); pattern->patternlen = patternlen; pattern->nowildcardlen = nowildcardlen; pattern->base = base;
Nice simplification.
Quoted 13 lines
dir.h +0
-1@@ -62,7 +62,6 @@ struct path_pattern {*/ struct pattern_list *pl; -const char *pattern;int patternlen;int nowildcardlen;const char *base;
dir.h struct path_pattern { · line 78
Quoted 6 lines
dir.h +2
-0@@ -74,6 +73,8 @@ struct path_pattern {* and from -1 decrementing for patterns from CLI args. */ int srcpos; + +char pattern[FLEX_ARRAY ]; };
OK. Looking good.
Thanks.
PATCH 7/13 sparse-checkout: reuse --stdin buffer when reading patterns
In reply to Jeff KingWhen we read patterns from --stdin, we loop on strbuf_getline(), and detach each line we read to pass into add_pattern(). This used to be necessary because add_pattern() required that the pattern strings remain valid while the pattern_list was in use. But it also created a leak, since we didn't record the detached buffers anywhere else.
Now that add_pattern() has been modified to make its own copy of the strings, we can stop detaching and fix the leak. This fixes 4 leaks detected in t1091.
--- builtin/sparse-checkout.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-)
builtin/sparse-checkout.c +4 -5
@@ -585,11 +585,10 @@ static void add_patterns_from_input(struct pattern_list *pl,if (file) {struct strbuf line =STRBUF_INIT ; -while (!strbuf_getline (&line, file)) { -size_t len; -char *buf =strbuf_detach (&line, &len); -add_pattern (buf, empty_base,0 , pl,0 ); - } +while (!strbuf_getline (&line, file)) +add_pattern (line.buf, empty_base,0 , pl,0 ); + +strbuf_release (&line); }else {for (i =0 ; i < argc; i++)add_pattern (argv[i], empty_base,0 , pl,0 );
Signature · 1 line
2.45.1.727.ge984192922
PATCH 8/13 sparse-checkout: always free "line" strbuf after reading input
In reply to Jeff KingIn add_patterns_from_input(), we may read lines from a file with a loop like this:
while (!strbuf_getline(&line, file)) {
...
strbuf_to_cone_pattern(&line, pl); }
/* we don't strbuf_release(&line) here! */
This generally is OK because strbuf_to_cone_pattern() consumes the buffer via strbuf_detach(). But we can leak in a few cases:
1. We don't always consume the buffer! If the line ends up empty after trimming, we leave strbuf_to_cone_pattern() without detaching. In most cases this is OK, because a subsequent getline() call will use the same buffer. But if you had an empty line at the end of file, for example, it would leak.
2. Even if strbuf_to_cone_pattern() always consumed the buffer, there's a subtle issue with strbuf_getline(). As we saw in 94e2aa555e (strbuf: fix leak when appendwholeline() fails with EOF, 2024-05-27), it's possible for it to return EOF with an allocated buffer (e.g., if the underlying getdelim() call saw an error). So we should always strbuf_release() after finishing a read loop like this.
Note that even the code to read patterns from argv has the same problem. Because that also uses strbuf_to_cone_pattern(), we stuff each argv entry into a strbuf. It uses the same "line" strbuf as the getline code, but we should position the strbuf_release() to cover both code paths.
This fixes at least 9 leaks found in t1091.
---
This touches on the strbuf_appendwholeline() thing we were talking about in the earlier thread. But even if we taught strbuf_getline() to never return an allocated buf on EOF, we'd still need this because of point
(1) above. I do suspect this anti-pattern may exist in more places, though (it was also present in the preimage of patch 7).
builtin/sparse-checkout.c | 1 + 1 file changed, 1 insertion(+)
builtin/sparse-checkout.c +1 -0
@@ -581,6 +581,7 @@ static void add_patterns_from_input(struct pattern_list *pl,strbuf_to_cone_pattern (&line, pl); } } +strbuf_release (&line); }else {if (file) {struct strbuf line =STRBUF_INIT ;
Signature · 1 line
2.45.1.727.ge984192922
PATCH 9/13 sparse-checkout: refactor temporary sparse_checkout_patterns
In reply to Jeff KingIn update_working_directory(), we take in a pattern_list, attach it to the repository index by assigning it to index->sparse_checkout_patterns, and then call unpack_trees. Afterwards, we remove it by setting index->sparse_checkout_patterns back to NULL.
But there are two possible leaks here:
1. If the index already had a populated sparse_checkout_patterns, we've obliterated it. We can fix this by saving and restoring it, rather than always setting it back to NULL.
2. We may call the function with a NULL pattern_list, expecting it to use the on-disk sparse file. In that case, the index routines will lazy-load the sparse patterns automatically. But now at the end of the function when we restore the patterns, we'll leak those lazy-loaded ones!
We can fix this by freeing the pattern list before overwriting its pointer whenever it does not match what was passed in (in practice this should only happen when the passed-in list is NULL, but this is erring on the defensive side).
Together these remove 48 indirect leaks found in t1091.
--- builtin/sparse-checkout.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)
builtin/sparse-checkout.c +8 -1
@@ -205,11 +205,13 @@ static int update_working_directory(struct pattern_list *pl)struct unpack_trees_options o;struct lock_file lock_file =LOCK_INIT ;struct repository *r = the_repository; +struct pattern_list *old_pl;/* If no branch has been checked out, there are no updates to make. */ if (is_index_unborn (r->index))return UPDATE_SPARSITY_SUCCESS ; + old_pl = r->index->sparse_checkout_patterns; r->index->sparse_checkout_patterns = pl;memset (&o,0 ,sizeof (o));
@@ -241,7 +243,12 @@ static int update_working_directory(struct pattern_list *pl)clean_tracked_sparse_directories (r); - r->index->sparse_checkout_patterns =NULL ; +if (r->index->sparse_checkout_patterns != pl) { +clear_pattern_list (r->index->sparse_checkout_patterns); +FREE_AND_NULL (r->index->sparse_checkout_patterns); + }else { + r->index->sparse_checkout_patterns = old_pl; + }return result; }
Signature · 1 line
2.45.1.727.ge984192922
Re: [PATCH 09/13] sparse-checkout: refactor temporary sparse_checkout_patterns
Quoted 10 lines · Jeff King
In
update_working_directory(), we take in apattern_list, attach it to the repository index by assigning it toindex->sparse_checkout_patterns, and then callunpack_trees. Afterwards, we remove it by settingindex->sparse_checkout_patternsback to NULL.But there are two possible leaks here:
1. If the index already had a populated
sparse_checkout_patterns, we've obliterated it. We can fix this by saving and restoring it, rather than always setting it back to NULL.
So this isn't only a leak, but also a potential bug because we did not restore the old pattern list?
builtin/sparse-checkout.c static int update_working_directory(struct pattern_list *pl) · line 253
Quoted 13 lines
builtin/sparse-checkout.c +6
-1@@ -241,7 +243,12 @@ static int update_working_directory(struct pattern_list *pl)clean_tracked_sparse_directories (r); - r->index->sparse_checkout_patterns =NULL ; +if (r->index->sparse_checkout_patterns != pl) { +clear_pattern_list (r->index->sparse_checkout_patterns); +FREE_AND_NULL (r->index->sparse_checkout_patterns); + }else { + r->index->sparse_checkout_patterns = old_pl; + }return result; }
What I find weird is that we sometimes restore the old value, and sometimes we don't. I get that it makes sense to conditionally free only the lazy-loaded list. But shouldn't we then unconditionally assign old_pl?
Makes me wonder whether I miss some subtlety here.
Patrick
Re: [PATCH 09/13] sparse-checkout: refactor temporary sparse_checkout_patterns
Quoted 8 lines · Patrick Steinhardt
Quoted 5 lines
But there are two possible leaks here:
1. If the index already had a populated
sparse_checkout_patterns, we've obliterated it. We can fix this by saving and restoring it, rather than always setting it back to NULL.So this isn't only a leak, but also a potential bug because we did not restore the old pattern list?
That's a good question, but I think in practice, it's not possible to trigger the bug. Within a run that calls this function, we only care about index->sparse_checkout_patterns in the context of this function itself (that is, we do not otherwise try to read the sparse index). And in this function, we always want to use the pattern_list that the caller hands us.
So nobody actually cares about the "restored" pattern list at all (except that in the lazy-load case, we leak it). Every call will overwrite it anyway.
Quoted 4 lines
Quoted 4 lines
builtin/sparse-checkout.c +0
-0@@ -241,7 +243,12 @@ static int update_working_directory(struct pattern_list *pl)clean_tracked_sparse_directories (r);
Quoted 14 lines
builtin/sparse-checkout.c static int update_working_directory(struct pattern_list *pl) · line 253
Quoted 9 lines
builtin/sparse-checkout.c +6
-1- r->index->sparse_checkout_patterns =NULL ; +if (r->index->sparse_checkout_patterns != pl) { +clear_pattern_list (r->index->sparse_checkout_patterns); +FREE_AND_NULL (r->index->sparse_checkout_patterns); + }else { + r->index->sparse_checkout_patterns = old_pl; + }return result; }What I find weird is that we sometimes restore the old value, and sometimes we don't. I get that it makes sense to conditionally free only the lazy-loaded list. But shouldn't we then unconditionally assign
old_pl?
Yes, I think it would be more correct to do so (otherwise we risk leaking old_pl). In practice, as I mentioned above, this is the only function that actually assigns to the index list. So after this hunk, I think we'd always come in to the function with a NULL value in the index (it starts NULL, we restore NULL after using a passed-in value, and we restore free-and-NULL after lazy-loading).
So we _could_ actually drop the "save old_pl" hunk from the beginning of the function entirely. I only hit that case after trying something like:
/* only throw away patterns if they were the ones we own */ if (r->index->sparse_checkout_patterns == pl)
r->index->sparse_checkout_patterns = NULL;
at the end of the function to fix the leak. And with that code, we _do_ see the lazy-loaded entries in subsequent calls. If we instead do:
/* throw away lazy-loaded ones */
if (r->index->sparse_checkout_patterns != pl) {
clear_pattern_list(r->index->sparse_checkout_patterns);
FREE_AND_NULL(r->index->sparse_checkout_patterns);}
Then I think you don't really need the else clause at all. But I was trying to be defensive and not make too many assumptions. I think in that spirit, just restoring old_pl always is the right thing, even though I don't think we'd ever trigger that.
-Peff
PATCH 10/13 sparse-checkout: free sparse_filename after use
In reply to Jeff KingWe allocate a heap buffer via get_sparse_checkout_filename(). Most calls remember to free it, but sparse_checkout_init() forgets to, causing a leak. Ironically, it remembers to do so in the error return paths, but not in the path that makes it all the way to the function end!
Fixing this clears up 6 leaks from t1091.
--- builtin/sparse-checkout.c | 2 ++ 1 file changed, 2 insertions(+)
builtin/sparse-checkout.c +2 -0
@@ -500,6 +500,8 @@ static int sparse_checkout_init(int argc, const char **argv, const char *prefix)return 0 ; } +free (sparse_filename); +add_pattern ("/*" , empty_base,0 , &pl,0 );add_pattern ("!/*/" , empty_base,0 , &pl,0 ); pl.use_cone_patterns = init_opts.cone_mode;
Signature · 1 line
2.45.1.727.ge984192922
Re: [PATCH 10/13] sparse-checkout: free sparse_filename after use
Quoted 17 lines · Jeff King
We allocate a heap buffer via
get_sparse_checkout_filename(). Most calls remember to free it, butsparse_checkout_init()forgets to, causing a leak. Ironically, it remembers to do so in the error return paths, but not in the path that makes it all the way to the function end!Fixing this clears up 6 leaks from t1091.
Signed-off-by Jeff King <[email protected]>--- builtin/sparse-checkout.c | 2 ++ 1 file changed, 2 insertions(+)builtin/sparse-checkout.c +0
-0
builtin/sparse-checkout.c static int sparse_checkout_init(int argc, const char **argv, const char *prefix) · line 504
Quoted 5 lines
builtin/sparse-checkout.c +2
-0@@ -500,6 +500,8 @@ static int sparse_checkout_init(int argc, const char **argv, const char *prefix)return 0 ; } +free (sparse_filename); +
I wonder whether it would make sense to merge this patch and patch 4 and then refactor the code to have a common exit path.
Patrick
Re: [PATCH 10/13] sparse-checkout: free sparse_filename after use
Quoted 8 lines · Patrick Steinhardt
Quoted 8 lines
builtin/sparse-checkout.c +0
-0@@ -500,6 +500,8 @@ static int sparse_checkout_init(int argc, const char **argv, const char *prefix)return 0 ; }
Quoted 5 lines
builtin/sparse-checkout.c static int sparse_checkout_init(int argc, const char **argv, const char *prefix) · line 504
Quoted 2 lines
builtin/sparse-checkout.c +2
-0+free (sparse_filename); +I wonder whether it would make sense to merge this patch and patch 4 and then refactor the code to have a common exit path.
I thought about that, too, but it doesn't quite work. In the non-error exit path we _don't_ clean up the pattern_list, because we tail-call into write_patterns_and_update(), which frees it itself.
If we refactored that function to _not_ free, and then switched here to a "ret" variable, like:
... ret = write_patterns_and_update(&pl); out: clear_pattern_list(&pl); free(sparse_filename); return ret;
it could work. I mostly tried to err on the side of minimizing refactoring, though.
-Peff
Re: [PATCH 10/13] sparse-checkout: free sparse_filename after use
Quoted 30 lines · Jeff King
Quoted 8 lines · Patrick Steinhardt
Quoted 8 lines
builtin/sparse-checkout.c +0
-0@@ -500,6 +500,8 @@ static int sparse_checkout_init(int argc, const char **argv, const char *prefix)return 0 ; }Quoted 5 lines
builtin/sparse-checkout.c static int sparse_checkout_init(int argc, const char **argv, const char *prefix) · line 504
Quoted 2 lines
builtin/sparse-checkout.c +2
-0+free (sparse_filename); +I wonder whether it would make sense to merge this patch and patch 4 and then refactor the code to have a common exit path.
I thought about that, too, but it doesn't quite work. In the non-error exit path we _don't_ clean up the
pattern_list, because we tail-call intowrite_patterns_and_update(), which frees it itself.If we refactored that function to _not_ free, and then switched here to a "ret" variable, like:
... ret = write_patterns_and_update(&pl); out: clear_pattern_list(&pl); free(sparse_filename); return ret;
Quoted 2 lines
it could work. I mostly tried to err on the side of minimizing refactoring, though.
Fair enough, thanks for explaining.
Patrick
PATCH 11/13 sparse-checkout: free pattern list in sparse_checkout_list()
In reply to Jeff KingIn sparse_checkout_list(), we create a pattern_list that needs to eventually be cleared. We remember to do so in the regular code path, but the cone-mode path does an early return, and forgets to clean up.
We could fix the leak by adding a new call to clear_pattern_list(). But we can simplify even further by just skipping the early return, pushing the other code path (which consists now of only one line!) into an else block. That also matches the same cone/non-cone if/else used in some other functions.
This fixes 15 leaks found in t1091.
--- builtin/sparse-checkout.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)
builtin/sparse-checkout.c +2 -3
@@ -95,11 +95,10 @@ static int sparse_checkout_list(int argc, const char **argv, const char *prefix)quote_c_style (sl.items[i].string,NULL , stdout,0 );printf ("\n" ); } - -return 0 ; + }else { +write_patterns_to_file (stdout, &pl); } -write_patterns_to_file (stdout, &pl);clear_pattern_list (&pl);return 0 ;
Signature · 1 line
2.45.1.727.ge984192922
PATCH 12/13 sparse-checkout: free string list after displaying
In reply to Jeff KingIn sparse_checkout_list(), we put the hashmap entries into a string_list so we can sort them. But after printing, we forget to free the list.
This patch drops 5 leaks from t1091.
--- builtin/sparse-checkout.c | 2 ++ 1 file changed, 2 insertions(+)
builtin/sparse-checkout.c +2 -0
@@ -95,6 +95,8 @@ static int sparse_checkout_list(int argc, const char **argv, const char *prefix)quote_c_style (sl.items[i].string,NULL , stdout,0 );printf ("\n" ); } + +string_list_clear (&sl,0 ); }else {write_patterns_to_file (stdout, &pl); }
Signature · 1 line
2.45.1.727.ge984192922
PATCH 13/13 sparse-checkout: free duplicate hashmap entries
In reply to Jeff KingIn insert_recursive_pattern(), we create a new pattern_entry to insert into the parent_hashmap. If we find that the same entry already exists in the hashmap, we skip adding the new one. But we forget to free the new one, creating a leak.
We can fix it by cleaning up the discarded entry. It would probably be possible to avoid creating it in the first place, but it's non-trivial. We'd have to define a "keydata" struct that lets us compare the existing entries to the broken-out fields. It's probably not worth the complexity, so we'll punt on that for now.
There is one subtlety here: our insertion is happening in a loop, with each iteration looking at the pattern we just inserted (hence the "recursive" in the name). So if we skip insertion, what do we look at?
The obvious answer is that we should remember the existing duplicate we found and use that. But I _think_ in that case, we probably already have all of the recursive bits already (from when the original entry was added). And so just breaking out of the loop would be correct. But I'm not 100% sure on that; after all, the original leaky code could have done the same break, but it didn't.
So I went with the "obvious answer" above, which has no chance of changing the behavior aside from fixing the leak.
With this patch, t1091 can now be marked leak-free.
--- builtin/sparse-checkout.c | 9 ++++++++- t/t1091-sparse-checkout-builtin.sh | 1 + 2 files changed, 9 insertions(+), 1 deletion(-)
builtin/sparse-checkout.c +8 -1
@@ -523,6 +523,7 @@ static void insert_recursive_pattern(struct pattern_list *pl, struct strbuf *patchar *slash =strrchr (e->pattern,'/' );char *oldpattern = e->pattern;size_t newlen; +struct pattern_entry *dup;if (!slash || slash == e->pattern)break ;
@@ -533,8 +534,14 @@ static void insert_recursive_pattern(struct pattern_list *pl, struct strbuf *pat e->pattern =xstrndup (oldpattern, newlen);hashmap_entry_init (&e->ent,fspathhash (e->pattern)); -if (!hashmap_get_entry (&pl->parent_hashmap, e, ent,NULL )) + dup =hashmap_get_entry (&pl->parent_hashmap, e, ent,NULL ); +if (!dup)hashmap_add (&pl->parent_hashmap, &e->ent); +else { +free (e->pattern); +free (e); + e = dup; + } } }
t/t1091-sparse-checkout-builtin.sh +1 -0
@@ -8,6 +8,7 @@ export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME GIT_TEST_SPLIT_INDEX=false export GIT_TEST_SPLIT_INDEX +TEST_PASSES_SANITIZE_LEAK=true . ./test-lib.sh list_files() {
Signature · 1 line
2.45.1.727.ge984192922
Re: [PATCH 13/13] sparse-checkout: free duplicate hashmap entries
builtin/sparse-checkout.c static void insert_recursive_pattern(struct pattern_list *pl, struct strbuf *pat · line 544
Quoted 13 lines · Jeff King
builtin/sparse-checkout.c +7
-1@@ -533,8 +534,14 @@ static void insert_recursive_pattern(struct pattern_list *pl, struct strbuf *pat e->pattern =xstrndup (oldpattern, newlen);hashmap_entry_init (&e->ent,fspathhash (e->pattern)); -if (!hashmap_get_entry (&pl->parent_hashmap, e, ent,NULL )) + dup =hashmap_get_entry (&pl->parent_hashmap, e, ent,NULL ); +if (!dup)hashmap_add (&pl->parent_hashmap, &e->ent); +else { +free (e->pattern); +free (e); + e = dup; + }
Nit: code style. The if (!dup) branch should also have curly braces.
Patrick
Quoted 7 lines · Jeff King
But as you might guess, that didn't make t1091 leak-free. And I couldn't bear leaving it on a cliffhanger like that, so patches 8-13 fix the rest of the issues triggered by that script.
And along the way we managed to make t1090 and t3602 leak-free, too (actually in patch 2, but I didn't notice until the whole thing was done).
Oh, btw, there's one interesting workflow I found. It's nice to see if your incremental work is making things better (and to make sure that the fixes are being exercised somewhere in the test suite). But the granularity of "is this script leak-free" is too coarse to see the incremental steps. Likewise even for individual test failures, as you can have many leaks in a single program.
So I ended up doing this a lot:
script=t1091-sparse-checkout-builtin.sh
make SANITIZE=leak &&
(
cd t &&
rm -rf test-results &&
LSAN_OPTIONS=abort_on_error=0:exitcode=0 \
GIT_TEST_SANITIZE_LEAK_LOG=true \
./$script
)
for i in Indirect Direct; do
echo "$i: $(grep "^$i leak" t/test-results/${script%.sh}.leak/* | wc -l)"done
It keeps running instead of aborting on leaks (otherwise your counts may go up as "failing" programs are fixed and we run more code). And instead just logs it all and counts up the log entries.
I wonder if it would be useful to have something like that baked into test-lib.
-Peff
Quoted 7 lines · Jeff King
LSAN_OPTIONS=abort_on_error=0:exitcode=0 \ GIT_TEST_SANITIZE_LEAK_LOG=true \ ./$script ) for i in Indirect Direct; do echo "$i: $(grep "^$i leak" t/test-results/${script%.sh}.leak/* | wc -l)"done
Neat trick.
Quoted 3 lines
It keeps running instead of aborting on leaks (otherwise your counts may go up as "failing" programs are fixed and we run more code). And instead just logs it all and counts up the log entries.
Indeed. It is a very nice idea.
Quoted 4 lines
I wonder if it would be useful to have something like that baked into test-lib.
-Peff
v2 cover leak fixes for sparse-checkout code
In reply to Jeff KingQuoted 15 lines · Jeff King
So Patrick nerd-sniped me by asking if my earlier leakfix for git-mv was triggered by the test suite. It was, in t7002, but that wasn't enough to make the script leak-free. So I figured, how hard could it be to go all the way?
Well. It only took a few patches (1-5), but in the process I stumbled on a rather tricky interface oddity of
add_pattern(), which caused some other leaks. The interface is fixed in patch 6, and the matching leak goes away in patch 7. Of course, I wanted to make sure it was tested, so after poking around I found that t1091 triggered it.But as you might guess, that didn't make t1091 leak-free. And I couldn't bear leaving it on a cliffhanger like that, so patches 8-13 fix the rest of the issues triggered by that script.
Quoted 6 lines
And along the way we managed to make t1090 and t3602 leak-free, too (actually in patch 2, but I didn't notice until the whole thing was done).
These should apply on top of jk/leakfixes, since the leak-freeness of t7002 depends on the fix there.
Here's a v2 with a few minor updates, based on review from Patrick. The restoration of "old_pl" in patch 9 is now done unconditionally (it doesn't matter in practice due to a bunch of subtle things, but it's the less surprising and more defensive choice). And a small style update in patch 13.
Range-diff:
1: 1be529905f = 1: 1be529905f sparse-checkout: free string list in write_cone_to_file()
2: 8e36bf2213 = 2: 8e36bf2213 sparse-checkout: pass string literals directly to add_pattern()
3: 1a3c5819f9 = 3: 1a3c5819f9 dir.c: free strings in sparse cone pattern hashmaps
4: a492842dd3 = 4: a492842dd3 sparse-checkout: clear patterns when init() sees existing sparse file
5: 2d8d402809 = 5: 2d8d402809 dir.c: free removed sparse-pattern hashmap entries
6: addb69e229 = 6: addb69e229 dir.c: always copy input to add_pattern()
7: f2ee2192f7 = 7: f2ee2192f7 sparse-checkout: reuse --stdin buffer when reading patterns
8: d3f7ea12ab = 8: d3f7ea12ab sparse-checkout: always free "line" strbuf after reading input
9: b5c07325d2 ! 9: b78d3b51b9 sparse-checkout: refactor temporary sparse_checkout_patterns
@@ builtin/sparse-checkout.c: static int update_working_directory(struct pattern_li
+ if (r->index->sparse_checkout_patterns != pl) {
+ clear_pattern_list(r->index->sparse_checkout_patterns);
+ FREE_AND_NULL(r->index->sparse_checkout_patterns);
-+ } else {
-+ r->index->sparse_checkout_patterns = old_pl;
+ }
++ r->index->sparse_checkout_patterns = old_pl;
++
return result;
}10: 26b1e08e6f = 10: ef05901aef sparse-checkout: free sparse_filename after use
11: d14f0f0546 = 11: 7b423b1691 sparse-checkout: free pattern list in sparse_checkout_list()
12: 84b1a5eb0d = 12: 034668997b sparse-checkout: free string list after displaying
13: 460a7f9324 ! 13: 82f14304ae sparse-checkout: free duplicate hashmap entries
@@ builtin/sparse-checkout.c: static void insert_recursive_pattern(struct pattern_l
- if (!hashmap_get_entry(&pl->parent_hashmap, e, ent, NULL))
+ dup = hashmap_get_entry(&pl->parent_hashmap, e, ent, NULL);
-+ if (!dup)
++ if (!dup) {
hashmap_add(&pl->parent_hashmap, &e->ent);
-+ else {
++ } else {
+ free(e->pattern);
+ free(e);
+ e = dup; [01/13]: sparse-checkout: free string list in write_cone_to_file() [02/13]: sparse-checkout: pass string literals directly to add_pattern() [03/13]: dir.c: free strings in sparse cone pattern hashmaps [04/13]: sparse-checkout: clear patterns when init() sees existing sparse file [05/13]: dir.c: free removed sparse-pattern hashmap entries [06/13]: dir.c: always copy input to add_pattern()
[07/13]: sparse-checkout: reuse --stdin buffer when reading patterns [08/13]: sparse-checkout: always free "line" strbuf after reading input [09/13]: sparse-checkout: refactor temporary sparse_checkout_patterns [10/13]: sparse-checkout: free sparse_filename after use
[11/13]: sparse-checkout: free pattern list in sparse_checkout_list() [12/13]: sparse-checkout: free string list after displaying [13/13]: sparse-checkout: free duplicate hashmap entries
builtin/sparse-checkout.c | 49 +++++++++++++++++++----------- dir.c | 42 ++++++++++++++++--------- dir.h | 3 +- t/t1090-sparse-checkout-scope.sh | 1 + t/t1091-sparse-checkout-builtin.sh | 1 + t/t3602-rm-sparse-checkout.sh | 1 + t/t7002-mv-sparse-checkout.sh | 1 + 7 files changed, 65 insertions(+), 33 deletions(-)
-Peff
PATCH v2 1/13 sparse-checkout: free string list in write_cone_to_file()
We use a string list to hold sorted and de-duped patterns, but don't free it before leaving the function, causing a leak.
This drops the number of leaks found in t7002 from 27 to 25.
--- builtin/sparse-checkout.c | 2 ++ 1 file changed, 2 insertions(+)
builtin/sparse-checkout.c +2 -0
@@ -311,6 +311,8 @@ static void write_cone_to_file(FILE *fp, struct pattern_list *pl)fprintf (fp,"%s/\n" , pattern);free (pattern); } + +string_list_clear (&sl,0 ); }static int write_patterns_and_update (struct pattern_list *pl)
Signature · 1 line
2.45.2.807.g3b5fadc4da
PATCH v2 2/13 sparse-checkout: pass string literals directly to add_pattern()
In reply to Jeff KingThe add_pattern() function takes a pattern string, but neither makes a copy of it nor takes ownership of the memory. So it is the caller's responsibility to make sure the string hangs around as long as the pattern_list which references it.
There are a few cases in sparse-checkout where we use string literal patterns by stuffing them into a strbuf, detaching the buffer, and then passing the result into add_pattern(). This creates a leak when the pattern_list is eventually cleared, since we don't retain a copy of the detached buffer to free.
But we can observe that the whole strbuf dance is unnecessary. The point was presumably[1] to satisfy the lifetime requirement of the string. But string literals have static duration; we can count on them lasting for the whole program.
So we can fix the leak by just passing them directly. And as a bonus, that simplifies the code. The leaks can be seen in t7002, which drops from 25 leaks to 22 with this patch. It also makes t3602 and t1090 leak-free.
In the long run, we will also want to clean up this (undocumented!) memory lifetime requirement of add_pattern(). But that can come in a later patch; passing the string literals directly will be the right thing either way.
[1] The code in question comes from 416adc8711 (sparse-checkout: update working directory in-process for 'init', 2019-11-21) and 99dfa6f970 (sparse-checkout: use in-process update for disable subcommand, 2019-11-21), but I didn't see anything in their commit messages or on the list explaining the strbufs.
--- builtin/sparse-checkout.c | 11 +++-------- t/t1090-sparse-checkout-scope.sh | 1 + t/t3602-rm-sparse-checkout.sh | 1 + 3 files changed, 5 insertions(+), 8 deletions(-)
builtin/sparse-checkout.c +3 -8
@@ -442,7 +442,6 @@ static int sparse_checkout_init(int argc, const char **argv, const char *prefix)char *sparse_filename;int res;struct object_id oid; -struct strbuf pattern =STRBUF_INIT ;static struct option builtin_sparse_checkout_init_options[] = { OPT_BOOL(0, "cone", &init_opts.cone_mode,
@@ -493,10 +492,8 @@ static int sparse_checkout_init(int argc, const char **argv, const char *prefix)return 0 ; } -strbuf_addstr (&pattern,"/*" ); -add_pattern (strbuf_detach (&pattern,NULL ), empty_base,0 , &pl,0 ); -strbuf_addstr (&pattern,"!/*/" ); -add_pattern (strbuf_detach (&pattern,NULL ), empty_base,0 , &pl,0 ); +add_pattern ("/*" , empty_base,0 , &pl,0 ); +add_pattern ("!/*/" , empty_base,0 , &pl,0 ); pl.use_cone_patterns = init_opts.cone_mode;return write_patterns_and_update (&pl);
@@ -893,7 +890,6 @@ static int sparse_checkout_disable(int argc, const char **argv, OPT_END(), };struct pattern_list pl; -struct strbuf match_all =STRBUF_INIT ;/* * We do not exit early if !core_apply_sparse_checkout; due to the
@@ -919,8 +915,7 @@ static int sparse_checkout_disable(int argc, const char **argv, pl.use_cone_patterns =0 ; core_apply_sparse_checkout =1 ; -strbuf_addstr (&match_all,"/*" ); -add_pattern (strbuf_detach (&match_all,NULL ), empty_base,0 , &pl,0 ); +add_pattern ("/*" , empty_base,0 , &pl,0 );prepare_repo_settings (the_repository); the_repository->settings.sparse_index =0 ;
t/t1090-sparse-checkout-scope.sh +1 -0
@@ -6,6 +6,7 @@ GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME TEST_CREATE_REPO_NO_TEMPLATE=1 +TEST_PASSES_SANITIZE_LEAK=true . ./test-lib.sh test_expect_success 'setup' '
t/t3602-rm-sparse-checkout.sh +1 -0
@@ -2,6 +2,7 @@ test_description='git rm in sparse checked out working trees' +TEST_PASSES_SANITIZE_LEAK=true . ./test-lib.sh test_expect_success 'setup' "
Signature · 1 line
2.45.2.807.g3b5fadc4da
PATCH v2 3/13 dir.c: free strings in sparse cone pattern hashmaps
In reply to Jeff KingThe pattern_list structs used for cone-mode sparse lookups use a few extra hashmaps. These store pattern_entry structs, each of which has its own heap-allocated pattern string. When we clean up the hashmaps, we free the individual pattern_entry structs, but forget to clean up the embedded strings, causing memory leaks.
We can fix this by iterating over the hashmaps to free the extra strings. This reduces the numbers of leaks in t7002 from 22 to 9.
One alternative here would be to make the string a FLEX_ARRAY member of the pattern_entry. Then there's no extra free() required, and as a bonus it would be a little more efficient. However, some of the refactoring gets awkward, as we are often assigning strings allocated by helper functions. So let's just fix the leak for now, and we can explore bigger refactoring separately.
--- dir.c | 19 +++++++++++++++---- 1 file changed, 15 insertions(+), 4 deletions(-)
dir.c +15 -4
@@ -726,6 +726,17 @@ static char *dup_and_filter_pattern(const char *pattern)return result; } +static void clear_pattern_entry_hashmap (struct hashmap *map) +{ +struct hashmap_iter iter; +struct pattern_entry *entry; + +hashmap_for_each_entry (map, &iter, entry, ent) { +free (entry->pattern); + } + hashmap_clear_and_free(map, struct pattern_entry, ent); +} +static void add_pattern_to_hashsets (struct pattern_list *pl,struct path_pattern *given) {struct pattern_entry *translated;
@@ -855,8 +866,8 @@ static void add_pattern_to_hashsets(struct pattern_list *pl, struct path_pattern clear_hashmaps:warning (_ ("disabling cone pattern matching" )); - hashmap_clear_and_free(&pl->parent_hashmap, struct pattern_entry, ent); - hashmap_clear_and_free(&pl->recursive_hashmap, struct pattern_entry, ent); +clear_pattern_entry_hashmap (&pl->recursive_hashmap); +clear_pattern_entry_hashmap (&pl->parent_hashmap); pl->use_cone_patterns =0 ; }
@@ -956,8 +967,8 @@ void clear_pattern_list(struct pattern_list *pl)free (pl->patterns[i]);free (pl->patterns);free (pl->filebuf); - hashmap_clear_and_free(&pl->recursive_hashmap, struct pattern_entry, ent); - hashmap_clear_and_free(&pl->parent_hashmap, struct pattern_entry, ent); +clear_pattern_entry_hashmap (&pl->recursive_hashmap); +clear_pattern_entry_hashmap (&pl->parent_hashmap);memset (pl,0 ,sizeof (*pl)); }
Signature · 1 line
2.45.2.807.g3b5fadc4da
PATCH v2 4/13 sparse-checkout: clear patterns when init() sees existing sparse file
In reply to Jeff KingIn sparse_checkout_init(), we first try to load patterns from an existing file. If we found any, we return immediately, but end up leaking the patterns we parsed. Fixing this reduces the number of leaks in t7002 from 9 down to 5.
Note that there are two other exits from the function, but they don't need the same treatment:
- if we can't resolve HEAD, we write out a hard-coded sparse file and return. But we know the pattern list is empty there, since we didn't find any in the on-disk file and we haven't yet added any of our own.
- otherwise, we do populate the list and then tail-call into write_patterns_and_update(). But that function frees the pattern_list itself, so we don't need to.
--- builtin/sparse-checkout.c | 1 + 1 file changed, 1 insertion(+)
builtin/sparse-checkout.c +1 -0
@@ -472,6 +472,7 @@ static int sparse_checkout_init(int argc, const char **argv, const char *prefix)/* If we already have a sparse-checkout file, use it. */ if (res >=0 ) {free (sparse_filename); +clear_pattern_list (&pl);return update_working_directory (NULL ); }
Signature · 1 line
2.45.2.807.g3b5fadc4da
PATCH v2 5/13 dir.c: free removed sparse-pattern hashmap entries
In reply to Jeff KingIn add_pattern_to_hashsets(), we remove entries from the recursive_hashmap when adding similar ones to the parent_hashmap. I won't pretend to understand all of what's going on here, but there's an obvious leak: whatever we removed from recursive_hashmap is not referenced anywhere else, and is never free()d.
We can easily fix this by asking the hashmap to return a pointer to the old entry. This makes t7002 now completely leak-free.
--- dir.c | 8 +++++++- t/t7002-mv-sparse-checkout.sh | 1 + 2 files changed, 8 insertions(+), 1 deletion(-)
dir.c +7 -1
@@ -810,6 +810,8 @@ static void add_pattern_to_hashsets(struct pattern_list *pl, struct path_patternif (given->patternlen >2 && !strcmp (given->pattern + given->patternlen -2 ,"/*" )) { +struct pattern_entry *old; +if (!(given->flags &PATTERN_FLAG_NEGATIVE )) {/* Not a cone pattern. */ warning (_ ("unrecognized pattern: '%s'" ), given->pattern);
@@ -835,7 +837,11 @@ static void add_pattern_to_hashsets(struct pattern_list *pl, struct path_pattern }hashmap_add (&pl->parent_hashmap, &translated->ent); -hashmap_remove (&pl->recursive_hashmap, &translated->ent, &data); + old =hashmap_remove_entry (&pl->recursive_hashmap, translated, ent, &data); +if (old) { +free (old->pattern); +free (old); + }free (data);return ; }
t/t7002-mv-sparse-checkout.sh +1 -0
@@ -2,6 +2,7 @@ test_description='git mv in sparse working trees' +TEST_PASSES_SANITIZE_LEAK=true . ./test-lib.sh setup_sparse_checkout () {
Signature · 1 line
2.45.2.807.g3b5fadc4da
PATCH v2 6/13 dir.c: always copy input to add_pattern()
In reply to Jeff KingThe add_pattern() function has a subtle and undocumented gotcha: the pattern string you pass in must remain valid as long as the pattern_list is in use (and nor do we take ownership of it). This is easy to get wrong, causing either subtle bugs (because you free or reuse the string buffer) or leaks (because you copy the string, but don't track ownership separately).
All of this "pattern" code was originally the "exclude" mechanism. So this _usually_ works OK because you add entries in one of two ways:
1. From the command-line (e.g., "--exclude"), in which case we're pointing to an argv entry which remains valid for the lifetime of the program.
2. From a file (e.g., ".gitignore"), in which case we read the whole file into a buffer, attach it to the pattern_list's "filebuf" entry, then parse the buffer in-place (adding NULs). The strings point into the filebuf, which is cleaned up when the whole pattern_list goes away.
But other code, like sparse-checkout, reads individual lines from stdin and passes them one by one to add_pattern(), leaking each. We could fix this by refactoring it to take in the whole buffer at once, like (2) above, and stuff it in "filebuf". But given how subtle the interface is, let's just fix it to always copy the string.
That seems at first like we'd be wasting extra memory, but we can mitigate that:
a. The path_pattern struct already uses a FLEXPTR, since we sometimes
make a copy (when we see "foo/", we strip off the trailing slash, requiring a modifiable copy of the string).
Since we'll now always embed the string inside the struct, we can switch to the regular FLEX_ARRAY pattern, saving us 8 bytes of pointer. So patterns with a trailing slash and ones under 8 bytes actually get smaller.
b. Now that we don't need the original string to hang around, we can
get rid of the "filebuf" mechanism entirely, and just free the file contents after parsing. Since files are the sources we'd expect to have the largest pattern sets, we should mostly break even on stuffing the same data into the individual structs.
This patch just adjusts the add_pattern() interface; it doesn't fix any leaky callers yet.
--- dir.c | 15 +++++---------- dir.h | 3 ++- 2 files changed, 7 insertions(+), 11 deletions(-)
dir.c +5 -10
@@ -925,12 +925,7 @@ void add_pattern(const char *string, const char *base,int nowildcardlen;parse_path_pattern (&string, &patternlen, &flags, &nowildcardlen); -if (flags &PATTERN_FLAG_MUSTBEDIR ) { -FLEXPTR_ALLOC_MEM (pattern, pattern, string, patternlen); - }else { - pattern =xmalloc (sizeof (*pattern)); - pattern->pattern = string; - } +FLEX_ALLOC_MEM (pattern, pattern, string, patternlen); pattern->patternlen = patternlen; pattern->nowildcardlen = nowildcardlen; pattern->base = base;
@@ -972,7 +967,6 @@ void clear_pattern_list(struct pattern_list *pl)for (i =0 ; i < pl->nr; i++)free (pl->patterns[i]);free (pl->patterns); -free (pl->filebuf);clear_pattern_entry_hashmap (&pl->recursive_hashmap);clear_pattern_entry_hashmap (&pl->parent_hashmap);
@@ -1166,23 +1160,23 @@ static int add_patterns(const char *fname, const char *base, int baselen, }add_patterns_from_buffer (buf, size, base, baselen, pl); +free (buf);return 0 ; }static int add_patterns_from_buffer (char *buf,size_t size,const char *base,int baselen,struct pattern_list *pl) { +char *orig = buf;int i, lineno =1 ;char *entry;hashmap_init (&pl->recursive_hashmap, pl_hashmap_cmp,NULL ,0 );hashmap_init (&pl->parent_hashmap, pl_hashmap_cmp,NULL ,0 ); - pl->filebuf = buf; -if (skip_utf8_bom (&buf, size)) - size -= buf - pl->filebuf; + size -= buf - orig; entry = buf;
@@ -1222,6 +1216,7 @@ int add_patterns_from_blob_to_list(return r;add_patterns_from_buffer (buf, size, base, baselen, pl); +free (buf);return 0 ; }
dir.h +2 -1
@@ -62,7 +62,6 @@ struct path_pattern {*/ struct pattern_list *pl; -const char *pattern;int patternlen;int nowildcardlen;const char *base;
@@ -74,6 +73,8 @@ struct path_pattern {* and from -1 decrementing for patterns from CLI args. */ int srcpos; + +char pattern[FLEX_ARRAY ]; };/* used for hashmaps for cone patterns */
Signature · 1 line
2.45.2.807.g3b5fadc4da
Re: [PATCH v2 06/13] dir.c: always copy input to add_pattern()
Am 04.06.24 um 12:13 schrieb Jeff King:
Quoted 2 lines
b. Now that we don't need the original string to hang around, we can
get rid of the "filebuf" mechanism entirely
Right. This patch does remove its use from dir.c, but leaves it in dir.h:
Quoted 13 lines
dir.h +0
-1@@ -62,7 +62,6 @@ struct path_pattern {*/ struct pattern_list *pl; -const char *pattern;int patternlen;int nowildcardlen;const char *base;
dir.h struct path_pattern { · line 80
Quoted 8 lines
dir.h +2
-0@@ -74,6 +73,8 @@ struct path_pattern {* and from -1 decrementing for patterns from CLI args. */ int srcpos; + +char pattern[FLEX_ARRAY ]; };/* used for hashmaps for cone patterns */
It can be dropped from struct pattern_list now, for completeness' sake.
René
Re: [PATCH v2 06/13] dir.c: always copy input to add_pattern()
Quoted 5 lines · René Scharfe
Am 04.06.24 um 12:13 schrieb Jeff King:
Quoted 2 lines
b. Now that we don't need the original string to hang around, we can
get rid of the "filebuf" mechanism entirelyRight. This patch does remove its use from
dir.c, but leaves it indir.h:
Hmph. I'm not sure how I managed that. I definitely removed it from the struct definition in order to find all of the sites that mention it, but somehow that didn't end up in the final patch. Thanks for noticing.
It looks like the topic hasn't hit next yet. Rather than send a v3 with this tiny change, Junio, do you mind squashing this into patch 6 (it's d465adca6d in your tree)?
---
dir.h +0 -3
@@ -95,9 +95,6 @@ struct pattern_list {int nr;int alloc; -/* remember pointer to exclude file contents so we can free() */ -char *filebuf; -/* origin of list, e.g. path to filename, or descriptive string */ const char *src;
-Peff
Re: [PATCH v2 06/13] dir.c: always copy input to add_pattern()
Quoted 3 lines · Jeff King
It looks like the topic hasn't hit next yet. Rather than send a v3 with this tiny change, Junio, do you mind squashing this into patch 6 (it's
d465adca6din your tree)?
Done. Thanks, both, for being careful.
PATCH v2 7/13 sparse-checkout: reuse --stdin buffer when reading patterns
In reply to Jeff KingWhen we read patterns from --stdin, we loop on strbuf_getline(), and detach each line we read to pass into add_pattern(). This used to be necessary because add_pattern() required that the pattern strings remain valid while the pattern_list was in use. But it also created a leak, since we didn't record the detached buffers anywhere else.
Now that add_pattern() has been modified to make its own copy of the strings, we can stop detaching and fix the leak. This fixes 4 leaks detected in t1091.
--- builtin/sparse-checkout.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-)
builtin/sparse-checkout.c +4 -5
@@ -585,11 +585,10 @@ static void add_patterns_from_input(struct pattern_list *pl,if (file) {struct strbuf line =STRBUF_INIT ; -while (!strbuf_getline (&line, file)) { -size_t len; -char *buf =strbuf_detach (&line, &len); -add_pattern (buf, empty_base,0 , pl,0 ); - } +while (!strbuf_getline (&line, file)) +add_pattern (line.buf, empty_base,0 , pl,0 ); + +strbuf_release (&line); }else {for (i =0 ; i < argc; i++)add_pattern (argv[i], empty_base,0 , pl,0 );
Signature · 1 line
2.45.2.807.g3b5fadc4da
PATCH v2 8/13 sparse-checkout: always free "line" strbuf after reading input
In reply to Jeff KingIn add_patterns_from_input(), we may read lines from a file with a loop like this:
while (!strbuf_getline(&line, file)) {
...
strbuf_to_cone_pattern(&line, pl); }
/* we don't strbuf_release(&line) here! */
This generally is OK because strbuf_to_cone_pattern() consumes the buffer via strbuf_detach(). But we can leak in a few cases:
1. We don't always consume the buffer! If the line ends up empty after trimming, we leave strbuf_to_cone_pattern() without detaching. In most cases this is OK, because a subsequent getline() call will use the same buffer. But if you had an empty line at the end of file, for example, it would leak.
2. Even if strbuf_to_cone_pattern() always consumed the buffer, there's a subtle issue with strbuf_getline(). As we saw in 94e2aa555e (strbuf: fix leak when appendwholeline() fails with EOF, 2024-05-27), it's possible for it to return EOF with an allocated buffer (e.g., if the underlying getdelim() call saw an error). So we should always strbuf_release() after finishing a read loop like this.
Note that even the code to read patterns from argv has the same problem. Because that also uses strbuf_to_cone_pattern(), we stuff each argv entry into a strbuf. It uses the same "line" strbuf as the getline code, but we should position the strbuf_release() to cover both code paths.
This fixes at least 9 leaks found in t1091.
--- builtin/sparse-checkout.c | 1 + 1 file changed, 1 insertion(+)
builtin/sparse-checkout.c +1 -0
@@ -581,6 +581,7 @@ static void add_patterns_from_input(struct pattern_list *pl,strbuf_to_cone_pattern (&line, pl); } } +strbuf_release (&line); }else {if (file) {struct strbuf line =STRBUF_INIT ;
Signature · 1 line
2.45.2.807.g3b5fadc4da
PATCH v2 9/13 sparse-checkout: refactor temporary sparse_checkout_patterns
In reply to Jeff KingIn update_working_directory(), we take in a pattern_list, attach it to the repository index by assigning it to index->sparse_checkout_patterns, and then call unpack_trees. Afterwards, we remove it by setting index->sparse_checkout_patterns back to NULL.
But there are two possible leaks here:
1. If the index already had a populated sparse_checkout_patterns, we've obliterated it. We can fix this by saving and restoring it, rather than always setting it back to NULL.
2. We may call the function with a NULL pattern_list, expecting it to use the on-disk sparse file. In that case, the index routines will lazy-load the sparse patterns automatically. But now at the end of the function when we restore the patterns, we'll leak those lazy-loaded ones!
We can fix this by freeing the pattern list before overwriting its pointer whenever it does not match what was passed in (in practice this should only happen when the passed-in list is NULL, but this is erring on the defensive side).
Together these remove 48 indirect leaks found in t1091.
--- builtin/sparse-checkout.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)
builtin/sparse-checkout.c +8 -1
@@ -205,11 +205,13 @@ static int update_working_directory(struct pattern_list *pl)struct unpack_trees_options o;struct lock_file lock_file =LOCK_INIT ;struct repository *r = the_repository; +struct pattern_list *old_pl;/* If no branch has been checked out, there are no updates to make. */ if (is_index_unborn (r->index))return UPDATE_SPARSITY_SUCCESS ; + old_pl = r->index->sparse_checkout_patterns; r->index->sparse_checkout_patterns = pl;memset (&o,0 ,sizeof (o));
@@ -241,7 +243,12 @@ static int update_working_directory(struct pattern_list *pl)clean_tracked_sparse_directories (r); - r->index->sparse_checkout_patterns =NULL ; +if (r->index->sparse_checkout_patterns != pl) { +clear_pattern_list (r->index->sparse_checkout_patterns); +FREE_AND_NULL (r->index->sparse_checkout_patterns); + } + r->index->sparse_checkout_patterns = old_pl; +return result; }
Signature · 1 line
2.45.2.807.g3b5fadc4da
PATCH v2 10/13 sparse-checkout: free sparse_filename after use
In reply to Jeff KingWe allocate a heap buffer via get_sparse_checkout_filename(). Most calls remember to free it, but sparse_checkout_init() forgets to, causing a leak. Ironically, it remembers to do so in the error return paths, but not in the path that makes it all the way to the function end!
Fixing this clears up 6 leaks from t1091.
--- builtin/sparse-checkout.c | 2 ++ 1 file changed, 2 insertions(+)
builtin/sparse-checkout.c +2 -0
@@ -500,6 +500,8 @@ static int sparse_checkout_init(int argc, const char **argv, const char *prefix)return 0 ; } +free (sparse_filename); +add_pattern ("/*" , empty_base,0 , &pl,0 );add_pattern ("!/*/" , empty_base,0 , &pl,0 ); pl.use_cone_patterns = init_opts.cone_mode;
Signature · 1 line
2.45.2.807.g3b5fadc4da
PATCH v2 11/13 sparse-checkout: free pattern list in sparse_checkout_list()
In reply to Jeff KingIn sparse_checkout_list(), we create a pattern_list that needs to eventually be cleared. We remember to do so in the regular code path, but the cone-mode path does an early return, and forgets to clean up.
We could fix the leak by adding a new call to clear_pattern_list(). But we can simplify even further by just skipping the early return, pushing the other code path (which consists now of only one line!) into an else block. That also matches the same cone/non-cone if/else used in some other functions.
This fixes 15 leaks found in t1091.
--- builtin/sparse-checkout.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)
builtin/sparse-checkout.c +2 -3
@@ -95,11 +95,10 @@ static int sparse_checkout_list(int argc, const char **argv, const char *prefix)quote_c_style (sl.items[i].string,NULL , stdout,0 );printf ("\n" ); } - -return 0 ; + }else { +write_patterns_to_file (stdout, &pl); } -write_patterns_to_file (stdout, &pl);clear_pattern_list (&pl);return 0 ;
Signature · 1 line
2.45.2.807.g3b5fadc4da
PATCH v2 12/13 sparse-checkout: free string list after displaying
In reply to Jeff KingIn sparse_checkout_list(), we put the hashmap entries into a string_list so we can sort them. But after printing, we forget to free the list.
This patch drops 5 leaks from t1091.
--- builtin/sparse-checkout.c | 2 ++ 1 file changed, 2 insertions(+)
builtin/sparse-checkout.c +2 -0
@@ -95,6 +95,8 @@ static int sparse_checkout_list(int argc, const char **argv, const char *prefix)quote_c_style (sl.items[i].string,NULL , stdout,0 );printf ("\n" ); } + +string_list_clear (&sl,0 ); }else {write_patterns_to_file (stdout, &pl); }
Signature · 1 line
2.45.2.807.g3b5fadc4da
PATCH v2 13/13 sparse-checkout: free duplicate hashmap entries
In reply to Jeff KingIn insert_recursive_pattern(), we create a new pattern_entry to insert into the parent_hashmap. If we find that the same entry already exists in the hashmap, we skip adding the new one. But we forget to free the new one, creating a leak.
We can fix it by cleaning up the discarded entry. It would probably be possible to avoid creating it in the first place, but it's non-trivial. We'd have to define a "keydata" struct that lets us compare the existing entries to the broken-out fields. It's probably not worth the complexity, so we'll punt on that for now.
There is one subtlety here: our insertion is happening in a loop, with each iteration looking at the pattern we just inserted (hence the "recursive" in the name). So if we skip insertion, what do we look at?
The obvious answer is that we should remember the existing duplicate we found and use that. But I _think_ in that case, we probably already have all of the recursive bits already (from when the original entry was added). And so just breaking out of the loop would be correct. But I'm not 100% sure on that; after all, the original leaky code could have done the same break, but it didn't.
So I went with the "obvious answer" above, which has no chance of changing the behavior aside from fixing the leak.
With this patch, t1091 can now be marked leak-free.
--- builtin/sparse-checkout.c | 9 ++++++++- t/t1091-sparse-checkout-builtin.sh | 1 + 2 files changed, 9 insertions(+), 1 deletion(-)
builtin/sparse-checkout.c +8 -1
@@ -523,6 +523,7 @@ static void insert_recursive_pattern(struct pattern_list *pl, struct strbuf *patchar *slash =strrchr (e->pattern,'/' );char *oldpattern = e->pattern;size_t newlen; +struct pattern_entry *dup;if (!slash || slash == e->pattern)break ;
@@ -533,8 +534,14 @@ static void insert_recursive_pattern(struct pattern_list *pl, struct strbuf *pat e->pattern =xstrndup (oldpattern, newlen);hashmap_entry_init (&e->ent,fspathhash (e->pattern)); -if (!hashmap_get_entry (&pl->parent_hashmap, e, ent,NULL )) + dup =hashmap_get_entry (&pl->parent_hashmap, e, ent,NULL ); +if (!dup) {hashmap_add (&pl->parent_hashmap, &e->ent); + }else { +free (e->pattern); +free (e); + e = dup; + } } }
t/t1091-sparse-checkout-builtin.sh +1 -0
@@ -8,6 +8,7 @@ export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME GIT_TEST_SPLIT_INDEX=false export GIT_TEST_SPLIT_INDEX +TEST_PASSES_SANITIZE_LEAK=true . ./test-lib.sh list_files() {
Signature · 1 line
2.45.2.807.g3b5fadc4da
Quoted 21 lines · Jeff King
Quoted 19 lines · Jeff King
So Patrick nerd-sniped me by asking if my earlier leakfix for git-mv was triggered by the test suite. It was, in t7002, but that wasn't enough to make the script leak-free. So I figured, how hard could it be to go all the way?
Well. It only took a few patches (1-5), but in the process I stumbled on a rather tricky interface oddity of
add_pattern(), which caused some other leaks. The interface is fixed in patch 6, and the matching leak goes away in patch 7. Of course, I wanted to make sure it was tested, so after poking around I found that t1091 triggered it.But as you might guess, that didn't make t1091 leak-free. And I couldn't bear leaving it on a cliffhanger like that, so patches 8-13 fix the rest of the issues triggered by that script.
And along the way we managed to make t1090 and t3602 leak-free, too (actually in patch 2, but I didn't notice until the whole thing was done).
Quoted 8 lines
Quoted 2 lines
These should apply on top of jk/leakfixes, since the leak-freeness of t7002 depends on the fix there.
Here's a v2 with a few minor updates, based on review from Patrick. The restoration of "
old_pl" in patch 9 is now done unconditionally (it doesn't matter in practice due to a bunch of subtle things, but it's the less surprising and more defensive choice). And a small style update in patch 13.
Thanks, the range-diff looks as expected.
Patrick