media: ov5693: Drop privacy-LED GPIO control
PATCH 1/1 media: ov5693: Drop privacy-LED GPIO control
Drop privacy-LED GPIO control, after the privacy-LED GPIO control was added to the ov5693 driver it was decided to model privacy-LEDs as LED class devices and have them be controlled by the v4l2-core.
So this is dead code since on devices with privacy LEDs the led is not a GPIO on the ov5693 fwnode, but rather is a LED class devices controlled by the v4l2-core.
Signed-off-by Hans de Goede <[email protected]>
--- drivers/media/i2c/ov5693.c | 10 ---------- 1 file changed, 10 deletions(-)
drivers/media/i2c/ov5693.c +0 -10
@@ -141,7 +141,6 @@ struct ov5693_device {struct gpio_desc *reset;struct gpio_desc *powerdown; -struct gpio_desc *privacy_led;struct regulator_bulk_data supplies[OV5693_NUM_SUPPLIES ];struct clk *xvclk;
@@ -657,7 +656,6 @@ static int ov5693_sensor_init(struct ov5693_device *ov5693)static void ov5693_sensor_powerdown (struct ov5693_device *ov5693) { -gpiod_set_value_cansleep (ov5693->privacy_led,0 );gpiod_set_value_cansleep (ov5693->reset,1 );gpiod_set_value_cansleep (ov5693->powerdown,1 );
@@ -687,7 +685,6 @@ static int ov5693_sensor_powerup(struct ov5693_device *ov5693)gpiod_set_value_cansleep (ov5693->powerdown,0 );gpiod_set_value_cansleep (ov5693->reset,0 ); -gpiod_set_value_cansleep (ov5693->privacy_led,1 );usleep_range (5000 ,7500 );
@@ -1201,13 +1198,6 @@ static int ov5693_configure_gpios(struct ov5693_device *ov5693)return PTR_ERR (ov5693->powerdown); } - ov5693->privacy_led =devm_gpiod_get_optional (ov5693->dev,"privacy-led" , -GPIOD_OUT_LOW ); -if (IS_ERR (ov5693->privacy_led)) { -dev_err (ov5693->dev,"Error fetching privacy-led GPIO\n" ); -return PTR_ERR (ov5693->privacy_led); - } -return 0 ; }
Signature · 1 line
2.45.1