Skip to contentSkip to conversation

rockchip: display PMIC variant properly + misc fixes for Theobroma boards

PATCH Superseded Quentin Schulz 3 participants 14 messages Jun 5, 2024 – Jun 8, 2024 Arm (32-bit)

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

v2 cover rockchip: display PMIC variant properly + misc fixes for Theobroma boards

This fixes how the Rockchip PMIC variant is shown for all but RK808 by stripping the LSB.

Also fix the size of the environment on Jaguar to match the default (smaller) size.

Fix SPL_PAD_TO on Ringneck.

Remove duplicated default value of ENV_OFFSET in puma defconfig.

Remove unnecessary override of the fit offset in u-boot dtsi for Puma and Ringneck.

Fix TPL_MAX_SIZE for Ringneck to match the (valid) default value for PX30 boards.

---
Changes in v2:
- add patch for fixing TPL_MAX_SIZE on PX30 Ringneck
- print show_variant when PMIC variant not found
- use bitfield_extract_by_mask instead of using hardcoded shift operator
- Link to v1: https://lore.kernel.org/r/[email protected]

---
Quentin Schulz (6):
rockchip: jaguar-rk3588: use default env size for Rockchip on MMC
rockchip: rk3399-puma: remove default value from defconfig
rockchip: rk3399-puma: remove unnecessary simple-bin:fit:offset override
rockchip: px30-ringneck: Update SPL_PAD_TO Kconfig option
power: rk8xx: properly print all supported PMICs name
rockchip: ringneck-px30: fix TPL_MAX_SIZE

 arch/arm/dts/px30-ringneck-haikou-u-boot.dtsi | 8 --------
 arch/arm/dts/rk3399-puma-haikou-u-boot.dtsi   | 6 ------
 configs/jaguar-rk3588_defconfig               | 1 -
 configs/puma-rk3399_defconfig                 | 1 -
 configs/ringneck-px30_defconfig               | 3 +--
 drivers/power/pmic/rk8xx.c                    | 5 ++---
 6 files changed, 3 insertions(+), 21 deletions(-)

---
base-commit: 8887ffb625f65475fd6619f8b05fb7a5a12b016b
change-id: 20240524-misc-tsd-e08551c01c8a

Best regards,

Signature · 1 line
Quentin Schulz <[email protected]>
#1 lore raw

PATCH v2 1/6 rockchip: jaguar-rk3588: use default env size for Rockchip on MMC

From: Quentin Schulz <[email protected]>

The default env size is 0x8000 when building for Rockchip SoCs with support for environment stored in MMC.

Jaguar hasn't entered mass production just yet, so it's a breaking change we can afford in the name of consistency.

---
 configs/jaguar-rk3588_defconfig | 1 -
 1 file changed, 1 deletion(-)
configs/jaguar-rk3588_defconfig +0 -1
index b69cf4cd057..36bf34d97c8 100644
@@ -5,7 +5,6 @@ CONFIG_ARCH_ROCKCHIP=y
 CONFIG_SPL_GPIO=y
 CONFIG_SF_DEFAULT_SPEED=24000000
 CONFIG_SF_DEFAULT_MODE=0x2000
-CONFIG_ENV_SIZE=0x1f000
 CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3588-jaguar"
 CONFIG_ROCKCHIP_RK3588=y
 CONFIG_ROCKCHIP_BOOT_MODE_REG=0x0
Signature · 1 line
2.45.1
Reviewed-by on v2 1/6
#2 lore raw

Re: [PATCH next v2 1/6] rockchip: jaguar-rk3588: use default env size for Rockchip on MMC

Quoted 9 lines · Quentin Schulz

From: Quentin Schulz <[email protected]>

The default env size is 0x8000 when building for Rockchip SoCs with support for environment stored in MMC.

Jaguar hasn't entered mass production just yet, so it's a breaking change we can afford in the name of consistency.

Thanks,
- Kever

Quoted 17 lines
---
  configs/jaguar-rk3588_defconfig | 1 -
  1 file changed, 1 deletion(-)
configs/jaguar-rk3588_defconfig +0 -1
index b69cf4cd057..36bf34d97c8 100644
@@ -5,7 +5,6 @@ CONFIG_ARCH_ROCKCHIP=y
  CONFIG_SPL_GPIO=y
  CONFIG_SF_DEFAULT_SPEED=24000000
  CONFIG_SF_DEFAULT_MODE=0x2000
-CONFIG_ENV_SIZE=0x1f000
  CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3588-jaguar"
  CONFIG_ROCKCHIP_RK3588=y
  CONFIG_ROCKCHIP_BOOT_MODE_REG=0x0
#3 lore raw

PATCH v2 2/6 rockchip: rk3399-puma: remove default value from defconfig

In reply to Quentin Schulz

From: Quentin Schulz <[email protected]>

CONFIG_ENV_OFFSET already defaults to 0x3F8000, however it is stored in lowercase hexdigits instead of uppercase like in the defconfig.

No change in behavior intended.

---
 configs/puma-rk3399_defconfig | 1 -
 1 file changed, 1 deletion(-)
configs/puma-rk3399_defconfig +0 -1
index 34a0b575991..42819102d70 100644
@@ -6,7 +6,6 @@ CONFIG_SPL_GPIO=y
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_SF_DEFAULT_SPEED=20000000
 CONFIG_ENV_SIZE=0x3000
-CONFIG_ENV_OFFSET=0x3F8000
 CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3399-puma-haikou"
 CONFIG_DM_RESET=y
 CONFIG_ROCKCHIP_RK3399=y
Signature · 1 line
2.45.1
Reviewed-by on v2 2/6
#4 lore raw

Re: [PATCH next v2 2/6] rockchip: rk3399-puma: remove default value from defconfig

Quoted 8 lines · Quentin Schulz

From: Quentin Schulz <[email protected]>

CONFIG_ENV_OFFSET already defaults to 0x3F8000, however it is stored in lowercase hexdigits instead of uppercase like in the defconfig.

No change in behavior intended.

Thanks,
- Kever

Quoted 17 lines
---
  configs/puma-rk3399_defconfig | 1 -
  1 file changed, 1 deletion(-)
configs/puma-rk3399_defconfig +0 -1
index 34a0b575991..42819102d70 100644
@@ -6,7 +6,6 @@ CONFIG_SPL_GPIO=y
  CONFIG_NR_DRAM_BANKS=1
  CONFIG_SF_DEFAULT_SPEED=20000000
  CONFIG_ENV_SIZE=0x3000
-CONFIG_ENV_OFFSET=0x3F8000
  CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3399-puma-haikou"
  CONFIG_DM_RESET=y
  CONFIG_ROCKCHIP_RK3399=y
#5 lore raw

PATCH v2 3/6 rockchip: rk3399-puma: remove unnecessary simple-bin:fit:offset override

In reply to Quentin Schulz

From: Quentin Schulz <[email protected]>

Since commit 6007b69d544e ("rockchip: rk3399-puma: Update SPL_PAD_TO Kconfig option"), SPL_PAD_TO matches (CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR - 64) * 512 and the default value for simple-bin:fit:offset in rockchip-u-boot.dtsi is SPL_PAD_TO, so let's remove this override.

---
 arch/arm/dts/rk3399-puma-haikou-u-boot.dtsi | 6 ------
 1 file changed, 6 deletions(-)
arch/arm/dts/rk3399-puma-haikou-u-boot.dtsi +0 -6
index 5a9bd320ec4..55895d0dd19 100644
@@ -33,12 +33,6 @@
 };
 
 &binman {
-	simple-bin {
-		fit {
-			offset = <((CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR - 64) * 512)>;
-		};
-	};
-
 #ifdef CONFIG_ROCKCHIP_SPI_IMAGE
 	simple-bin-spi {
 		fit {
Signature · 1 line
2.45.1
Reviewed-by on v2 3/6
#6 lore raw

Re: [PATCH next v2 3/6] rockchip: rk3399-puma: remove unnecessary simple-bin:fit:offset override

Quoted 9 lines · Quentin Schulz

From: Quentin Schulz <[email protected]>

Since commit 6007b69d544e ("rockchip: rk3399-puma: Update SPL_PAD_TO Kconfig option"), SPL_PAD_TO matches (CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR - 64) * 512 and the default value for simple-bin:fit:offset in rockchip-u-boot.dtsi is SPL_PAD_TO, so let's remove this override.

Thanks,
- Kever

Quoted 22 lines
---
  arch/arm/dts/rk3399-puma-haikou-u-boot.dtsi | 6 ------
  1 file changed, 6 deletions(-)
arch/arm/dts/rk3399-puma-haikou-u-boot.dtsi +0 -6
index 5a9bd320ec4..55895d0dd19 100644
@@ -33,12 +33,6 @@
  };
 
  &binman {
-	simple-bin {
-		fit {
-			offset = <((CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR - 64) * 512)>;
-		};
-	};
-
  #ifdef CONFIG_ROCKCHIP_SPI_IMAGE
  	simple-bin-spi {
  		fit {
#7 lore raw

PATCH v2 4/6 rockchip: px30-ringneck: Update SPL_PAD_TO Kconfig option

In reply to Quentin Schulz

From: Quentin Schulz <[email protected]>

On px30-ringneck the FIT payload is located at sector 0x200 compared to the more Rockchip common sector 0x4000 offset:

	SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x200

Because FIT payload is located at sector 0x200 and the TPL+SPL is located at sector 64, the combined size of TPL+SPL cannot take up more than 224KiB:

	(0x200 - 64) x 512 = 0x38000 (224 KiB)

Adjust SPL_PAD_TO to match the used 0x200 sector offset.

While at it, update the px30-ringneck-u-boot.dtsi to remove the now unnecessary override of simple-bin:fit:offset since SPL_PAD_TO matches with the current formula.

---
 arch/arm/dts/px30-ringneck-haikou-u-boot.dtsi | 8 --------
 configs/ringneck-px30_defconfig               | 2 +-
 2 files changed, 1 insertion(+), 9 deletions(-)
arch/arm/dts/px30-ringneck-haikou-u-boot.dtsi +0 -8
index e04766ad09c..29ea2763636 100644
@@ -15,14 +15,6 @@
 	};
 };
 
-&binman {
-	simple-bin {
-		fit {
-			offset = <((CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR - 64) * 512)>;
-		};
-	};
-};
-
 &emmc_clk {
 	bootph-all;
 };
configs/ringneck-px30_defconfig +1 -1
index dedf35d4347..a22d25e0089 100644
@@ -25,7 +25,7 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/px30-ringneck-haikou.dtb"
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_MISC_INIT_R=y
 CONFIG_SPL_MAX_SIZE=0x20000
-CONFIG_SPL_PAD_TO=0x0
+CONFIG_SPL_PAD_TO=0x38000
 CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_BOOTROM_SUPPORT=y
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
Signature · 1 line
2.45.1
Reviewed-by on v2 4/6
#8 lore raw

Re: [PATCH next v2 4/6] rockchip: px30-ringneck: Update SPL_PAD_TO Kconfig option

Quoted 11 lines · Quentin Schulz

From: Quentin Schulz <[email protected]>

On px30-ringneck the FIT payload is located at sector 0x200 compared to the more Rockchip common sector 0x4000 offset:

	SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x200

Because FIT payload is located at sector 0x200 and the TPL+SPL is located at sector 64, the combined size of TPL+SPL cannot take up more than 224KiB:

	(0x200 - 64) x 512 = 0x38000 (224 KiB)
Quoted 7 lines

Adjust SPL_PAD_TO to match the used 0x200 sector offset.

While at it, update the px30-ringneck-u-boot.dtsi to remove the now unnecessary override of simple-bin:fit:offset since SPL_PAD_TO matches with the current formula.

Thanks,
- Kever

Quoted 38 lines
---
  arch/arm/dts/px30-ringneck-haikou-u-boot.dtsi | 8 --------
  configs/ringneck-px30_defconfig               | 2 +-
  2 files changed, 1 insertion(+), 9 deletions(-)
arch/arm/dts/px30-ringneck-haikou-u-boot.dtsi +0 -8
index e04766ad09c..29ea2763636 100644
@@ -15,14 +15,6 @@
  	};
  };
 
-&binman {
-	simple-bin {
-		fit {
-			offset = <((CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR - 64) * 512)>;
-		};
-	};
-};
-
  &emmc_clk {
  	bootph-all;
  };
configs/ringneck-px30_defconfig +1 -1
index dedf35d4347..a22d25e0089 100644
@@ -25,7 +25,7 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/px30-ringneck-haikou.dtb"
  CONFIG_DISPLAY_BOARDINFO_LATE=y
  CONFIG_MISC_INIT_R=y
  CONFIG_SPL_MAX_SIZE=0x20000
-CONFIG_SPL_PAD_TO=0x0
+CONFIG_SPL_PAD_TO=0x38000
  CONFIG_SPL_BOARD_INIT=y
  CONFIG_SPL_BOOTROM_SUPPORT=y
  # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
#9 lore raw

PATCH v2 5/6 power: rk8xx: properly print all supported PMICs name

In reply to Quentin Schulz

From: Quentin Schulz <[email protected]>

The ID of the PMIC is stored in the 2 16b registers but the only part that matters right now is the 3 MSB, which make the 3 digits (in hex) of the part number.

Right now, only RK808 was properly displayed, with this all currently supported PMICs should display the proper part number.

Additionally, when the PMIC variant is not found, print that value instead of the masked unshifted value as all PMICs we support for now have their LSB ignored to represent the actual part number.

Tested on RK806 (RK3588 Jaguar), RK808 (RK3399 Puma) and RK809 (PX30 Ringneck).

---
 drivers/power/pmic/rk8xx.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
drivers/power/pmic/rk8xx.c +2 -3
index 12ff26a0855..4d07e630579 100644
@@ -277,10 +277,9 @@ static int rk8xx_probe(struct udevice *dev)
 		return ret;
 
 	priv->variant = ((msb << 8) | lsb) & RK8XX_ID_MSK;
-	show_variant = priv->variant;
+	show_variant = bitfield_extract_by_mask(priv->variant, RK8XX_ID_MSK);
 	switch (priv->variant) {
 	case RK808_ID:
-		show_variant = 0x808;	/* RK808 hardware ID is 0 */
 		break;
 	case RK805_ID:
 	case RK816_ID:
@@ -311,7 +310,7 @@ static int rk8xx_probe(struct udevice *dev)
 		init_data_num = ARRAY_SIZE(rk806_init_reg);
 		break;
 	default:
-		printf("Unknown PMIC: RK%x!!\n", priv->variant);
+		printf("Unknown PMIC: RK%x!!\n", show_variant);
 		return -EINVAL;
 	}
 
Signature · 1 line
2.45.1
Reviewed-by on v2 5/6
#10 lore raw

Re: [PATCH next v2 5/6] power: rk8xx: properly print all supported PMICs name

Quoted 9 lines · Quentin Schulz

From: Quentin Schulz <[email protected]>

The ID of the PMIC is stored in the 2 16b registers but the only part that matters right now is the 3 MSB, which make the 3 digits (in hex) of the part number.

Right now, only RK808 was properly displayed, with this all currently supported PMICs should display the proper part number.

Quoted 8 lines

Additionally, when the PMIC variant is not found, print that value instead of the masked unshifted value as all PMICs we support for now have their LSB ignored to represent the actual part number.

Tested on RK806 (RK3588 Jaguar), RK808 (RK3399 Puma) and RK809 (PX30 Ringneck).

Thanks,
- Kever

Quoted 30 lines
---
  drivers/power/pmic/rk8xx.c | 5 ++---
  1 file changed, 2 insertions(+), 3 deletions(-)
drivers/power/pmic/rk8xx.c +2 -3
index 12ff26a0855..4d07e630579 100644
@@ -277,10 +277,9 @@ static int rk8xx_probe(struct udevice *dev)
  		return ret;
 
  	priv->variant = ((msb << 8) | lsb) & RK8XX_ID_MSK;
-	show_variant = priv->variant;
+	show_variant = bitfield_extract_by_mask(priv->variant, RK8XX_ID_MSK);
  	switch (priv->variant) {
  	case RK808_ID:
-		show_variant = 0x808;	/* RK808 hardware ID is 0 */
  		break;
  	case RK805_ID:
  	case RK816_ID:
@@ -311,7 +310,7 @@ static int rk8xx_probe(struct udevice *dev)
  		init_data_num = ARRAY_SIZE(rk806_init_reg);
  		break;
  	default:
-		printf("Unknown PMIC: RK%x!!\n", priv->variant);
+		printf("Unknown PMIC: RK%x!!\n", show_variant);
  		return -EINVAL;
  	}
 
Reviewed-by on v2 5/6
#11 lore raw

Re: [PATCH next v2 5/6] power: rk8xx: properly print all supported PMICs name

In reply to Quentin Schulz
Quoted 9 lines · Quentin Schulz

From: Quentin Schulz <[email protected]>

The ID of the PMIC is stored in the 2 16b registers but the only part that matters right now is the 3 MSB, which make the 3 digits (in hex) of the part number.

Right now, only RK808 was properly displayed, with this all currently supported PMICs should display the proper part number.

Quoted 8 lines

Additionally, when the PMIC variant is not found, print that value instead of the masked unshifted value as all PMICs we support for now have their LSB ignored to represent the actual part number.

Tested on RK806 (RK3588 Jaguar), RK808 (RK3399 Puma) and RK809 (PX30 Ringneck).

Looking good to me.

Quoted 28 lines
---
 drivers/power/pmic/rk8xx.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
drivers/power/pmic/rk8xx.c +2 -3
index 12ff26a0855..4d07e630579 100644
@@ -277,10 +277,9 @@ static int rk8xx_probe(struct udevice *dev)
 		return ret;
 
 	priv->variant = ((msb << 8) | lsb) & RK8XX_ID_MSK;
-	show_variant = priv->variant;
+	show_variant = bitfield_extract_by_mask(priv->variant, RK8XX_ID_MSK);
 	switch (priv->variant) {
 	case RK808_ID:
-		show_variant = 0x808;	/* RK808 hardware ID is 0 */
 		break;
 	case RK805_ID:
 	case RK816_ID:
@@ -311,7 +310,7 @@ static int rk8xx_probe(struct udevice *dev)
 		init_data_num = ARRAY_SIZE(rk806_init_reg);
 		break;
 	default:
-		printf("Unknown PMIC: RK%x!!\n", priv->variant);
+		printf("Unknown PMIC: RK%x!!\n", show_variant);
 		return -EINVAL;
 	}
#12 lore raw

PATCH v2 6/6 rockchip: ringneck-px30: fix TPL_MAX_SIZE

In reply to Quentin Schulz

From: Quentin Schulz <[email protected]>

Ringneck was mistakenly set to allow up to 128KiB for the TPL code size while PX30 SoC only has 16KiB of SRAM.

Therefore, let's use the default value of TPL_MAX_SIZE from the SoC (which is 10KiB) so that the max code size is actually checked and useful.

Fixes c925be73a0a8 ("rockchip: add support for PX30 Ringneck SoM on Haikou Devkit")
---
 configs/ringneck-px30_defconfig | 1 -
 1 file changed, 1 deletion(-)
configs/ringneck-px30_defconfig +0 -1
index a22d25e0089..9965e55d611 100644
@@ -14,7 +14,6 @@ CONFIG_SPL_DRIVERS_MISC=y
 CONFIG_DEBUG_UART_BASE=0xFF030000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SYS_LOAD_ADDR=0x800800
-CONFIG_TPL_MAX_SIZE=0x20000
 CONFIG_DEBUG_UART=y
 # CONFIG_ANDROID_BOOT_IMAGE is not set
 CONFIG_FIT=y
Signature · 1 line
2.45.1
Reviewed-by on v2 6/6
#13 lore raw

Re: [PATCH next v2 6/6] rockchip: ringneck-px30: fix TPL_MAX_SIZE

Quoted 11 lines · Quentin Schulz

From: Quentin Schulz <[email protected]>

Ringneck was mistakenly set to allow up to 128KiB for the TPL code size while PX30 SoC only has 16KiB of SRAM.

Therefore, let's use the default value of TPL_MAX_SIZE from the SoC (which is 10KiB) so that the max code size is actually checked and useful.

Fixes c925be73a0a8 ("rockchip: add support for PX30 Ringneck SoM on Haikou Devkit")

Thanks,
- Kever

Quoted 17 lines
---
  configs/ringneck-px30_defconfig | 1 -
  1 file changed, 1 deletion(-)
configs/ringneck-px30_defconfig +0 -1
index a22d25e0089..9965e55d611 100644
@@ -14,7 +14,6 @@ CONFIG_SPL_DRIVERS_MISC=y
  CONFIG_DEBUG_UART_BASE=0xFF030000
  CONFIG_DEBUG_UART_CLOCK=24000000
  CONFIG_SYS_LOAD_ADDR=0x800800
-CONFIG_TPL_MAX_SIZE=0x20000
  CONFIG_DEBUG_UART=y
  # CONFIG_ANDROID_BOOT_IMAGE is not set
  CONFIG_FIT=y