Skip to contentSkip to conversation

dt-bindings: serial: mediatek,uart: add MT7988

PATCH In review Rafał Miłecki 3 participants 5 messages Jun 5, 2024

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/2 dt-bindings: serial: mediatek,uart: add MT7988

From: Rafał Miłecki <[email protected]>

Add compatible string for serial on MT7988 SoC.

---
 Documentation/devicetree/bindings/serial/mediatek,uart.yaml | 1 +
 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/serial/mediatek,uart.yaml +1 -0
index 303d02ca4e1b..ff61ffdcad1d 100644
@@ -37,6 +37,7 @@ properties:
               - mediatek,mt7623-uart
               - mediatek,mt7629-uart
               - mediatek,mt7986-uart
+              - mediatek,mt7988-uart
               - mediatek,mt8127-uart
               - mediatek,mt8135-uart
               - mediatek,mt8173-uart
Signature · 1 line
2.35.3
#1 lore raw

PATCH 2/2 arm64: dts: mediatek: mt7988: add UART controllers

From: Rafał Miłecki <[email protected]>

MT7988 has three on-SoC UART controllers that support M16C450 and M16550A modes.

---
 arch/arm64/boot/dts/mediatek/mt7988a.dtsi | 35 ++++++++++++++++++++++-
 1 file changed, 34 insertions(+), 1 deletion(-)
arch/arm64/boot/dts/mediatek/mt7988a.dtsi +34 -1
index aa728331e876..7690a83911af 100644
@@ -86,7 +86,7 @@ infracfg: clock-controller@10001000 {
 			#clock-cells = <1>;
 		};
 
-		clock-controller@1001b000 {
+		topckgen: clock-controller@1001b000 {
 			compatible = "mediatek,mt7988-topckgen", "syscon";
 			reg = <0 0x1001b000 0 0x1000>;
 			#clock-cells = <1>;
@@ -124,6 +124,39 @@ pwm@10048000 {
 			status = "disabled";
 		};
 
+		serial@11000000 {
+			compatible = "mediatek,mt7988-uart", "mediatek,mt6577-uart";
+			reg = <0 0x11000000 0 0x100>;
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uart", "wakeup";
+			clocks = <&topckgen CLK_TOP_UART_SEL>,
+				 <&infracfg CLK_INFRA_52M_UART0_CK>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		serial@11000100 {
+			compatible = "mediatek,mt7988-uart", "mediatek,mt6577-uart";
+			reg = <0 0x11000100 0 0x100>;
+			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uart", "wakeup";
+			clocks = <&topckgen CLK_TOP_UART_SEL>,
+				 <&infracfg CLK_INFRA_52M_UART1_CK>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		serial@11000200 {
+			compatible = "mediatek,mt7988-uart", "mediatek,mt6577-uart";
+			reg = <0 0x11000200 0 0x100>;
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uart", "wakeup";
+			clocks = <&topckgen CLK_TOP_UART_SEL>,
+				 <&infracfg CLK_INFRA_52M_UART2_CK>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
 		i2c@11003000 {
 			compatible = "mediatek,mt7981-i2c";
 			reg = <0 0x11003000 0 0x1000>,
Signature · 1 line
2.35.3