Skip to contentSkip to conversation

usb: gadget: uvc: configfs: ensure guid to be valid before set

PATCH New Sasha Levin 1 participant 20 messages Jun 5, 2024

Subsystems (10)
lore
Share & tools
lore

Sasha Levin

author maintainer
#0 lore raw

PATCH 1/20 usb: gadget: uvc: configfs: ensure guid to be valid before set

From: Michael Grzeschik <[email protected]>

[ Upstream commit f7a7f80ccc8df017507e2b1e1dd652361374d25b ]

When setting the guid via configfs it is possible to test if its value is one of the kernel supported ones by calling uvc_format_by_guid on it. If the result is NULL, we know the guid is unsupported and can be ignored.

---
 drivers/usb/gadget/function/uvc_configfs.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)
drivers/usb/gadget/function/uvc_configfs.c +13 -1
index d16c04d2961b6..4acf336e946d6 100644
@@ -13,6 +13,7 @@
 #include "uvc_configfs.h"
 
 #include <linux/sort.h>
+#include <linux/usb/uvc.h>
 #include <linux/usb/video.h>
 
 /* -----------------------------------------------------------------------------
@@ -2260,6 +2261,8 @@ static ssize_t uvcg_uncompressed_guid_format_store(struct config_item *item,
 	struct f_uvc_opts *opts;
 	struct config_item *opts_item;
 	struct mutex *su_mutex = &ch->fmt.group.cg_subsys->su_mutex;
+	const struct uvc_format_desc *format;
+	u8 tmpguidFormat[sizeof(ch->desc.guidFormat)];
 	int ret;
 
 	mutex_lock(su_mutex); /* for navigating configfs hierarchy */
@@ -2273,7 +2276,16 @@ static ssize_t uvcg_uncompressed_guid_format_store(struct config_item *item,
 		goto end;
 	}
 
-	memcpy(ch->desc.guidFormat, page,
+	memcpy(tmpguidFormat, page,
+	       min(sizeof(tmpguidFormat), len));
+
+	format = uvc_format_by_guid(tmpguidFormat);
+	if (!format) {
+		ret = -EINVAL;
+		goto end;
+	}
+
+	memcpy(ch->desc.guidFormat, tmpguidFormat,
 	       min(sizeof(ch->desc.guidFormat), len));
 	ret = sizeof(ch->desc.guidFormat);
 
Signature · 1 line
2.43.0
author maintainer
#1 lore raw

PATCH 2/20 f2fs: remove clear SB_INLINECRYPT flag in default_options

From: Yunlei He <[email protected]>

[ Upstream commit ac5eecf481c29942eb9a862e758c0c8b68090c33 ]

In f2fs_remount, SB_INLINECRYPT flag will be clear and re-set. If create new file or open file during this gap, these files will not use inlinecrypt. Worse case, it may lead to data corruption if wrappedkey_v0 is enable.

Thread A: Thread B:

-f2fs_remount -f2fs_file_open or f2fs_new_inode
-default_options
<- clear SB_INLINECRYPT flag

-fscrypt_select_encryption_impl

-parse_options
<- set SB_INLINECRYPT again

---
 fs/f2fs/super.c | 2 --
 1 file changed, 2 deletions(-)
fs/f2fs/super.c +0 -2
index ab437022ea56f..5d294c8a025ca 100644
@@ -2186,8 +2186,6 @@ static void default_options(struct f2fs_sb_info *sbi, bool remount)
 	F2FS_OPTION(sbi).memory_mode = MEMORY_MODE_NORMAL;
 	F2FS_OPTION(sbi).errors = MOUNT_ERRORS_CONTINUE;
 
-	sbi->sb->s_flags &= ~SB_INLINECRYPT;
-
 	set_opt(sbi, INLINE_XATTR);
 	set_opt(sbi, INLINE_DATA);
 	set_opt(sbi, INLINE_DENTRY);
Signature · 1 line
2.43.0
author maintainer
#2 lore raw

PATCH 3/20 usb: misc: uss720: check for incompatible versions of the Belkin F5U002

In reply to Sasha Levin

From: Alex Henrie <[email protected]>

[ Upstream commit 3295f1b866bfbcabd625511968e8a5c541f9ab32 ]

The incompatible device in my possession has a sticker that says "F5U002 Rev 2" and "P80453-B", and lsusb identifies it as "050d:0002 Belkin Components IEEE-1284 Controller". There is a bug report from 2007 from Michael Trausch who was seeing the exact same errors that I saw in 2024 trying to use this cable.

---
 drivers/usb/misc/uss720.c | 20 +++++++++++++-------
 1 file changed, 13 insertions(+), 7 deletions(-)
drivers/usb/misc/uss720.c +13 -7
index b00d92db5dfd1..eb5a8e0d9e2d6 100644
@@ -677,7 +677,7 @@ static int uss720_probe(struct usb_interface *intf,
 	struct parport_uss720_private *priv;
 	struct parport *pp;
 	unsigned char reg;
-	int i;
+	int ret;
 
 	dev_dbg(&intf->dev, "probe: vendor id 0x%x, device id 0x%x\n",
 		le16_to_cpu(usbdev->descriptor.idVendor),
@@ -688,8 +688,8 @@ static int uss720_probe(struct usb_interface *intf,
 		usb_put_dev(usbdev);
 		return -ENODEV;
 	}
-	i = usb_set_interface(usbdev, intf->altsetting->desc.bInterfaceNumber, 2);
-	dev_dbg(&intf->dev, "set interface result %d\n", i);
+	ret = usb_set_interface(usbdev, intf->altsetting->desc.bInterfaceNumber, 2);
+	dev_dbg(&intf->dev, "set interface result %d\n", ret);
 
 	interface = intf->cur_altsetting;
 
@@ -725,12 +725,18 @@ static int uss720_probe(struct usb_interface *intf,
 	set_1284_register(pp, 7, 0x00, GFP_KERNEL);
 	set_1284_register(pp, 6, 0x30, GFP_KERNEL);  /* PS/2 mode */
 	set_1284_register(pp, 2, 0x0c, GFP_KERNEL);
-	/* debugging */
-	get_1284_register(pp, 0, &reg, GFP_KERNEL);
+
+	/* The Belkin F5U002 Rev 2 P80453-B USB parallel port adapter shares the
+	 * device ID 050d:0002 with some other device that works with this
+	 * driver, but it itself does not. Detect and handle the bad cable
+	 * here. */
+	ret = get_1284_register(pp, 0, &reg, GFP_KERNEL);
 	dev_dbg(&intf->dev, "reg: %7ph\n", priv->reg);
+	if (ret < 0)
+		return ret;
 
-	i = usb_find_last_int_in_endpoint(interface, &epd);
-	if (!i) {
+	ret = usb_find_last_int_in_endpoint(interface, &epd);
+	if (!ret) {
 		dev_dbg(&intf->dev, "epaddr %d interval %d\n",
 				epd->bEndpointAddress, epd->bInterval);
 	}
Signature · 1 line
2.43.0
author maintainer
#3 lore raw

PATCH 4/20 Avoid hw_desc array overrun in dw-axi-dmac

In reply to Sasha Levin

From: Joao Pinto <[email protected]>

[ Upstream commit 333e11bf47fa8d477db90e2900b1ed3c9ae9b697 ]

I have a use case where nr_buffers = 3 and in which each descriptor is composed by 3 segments, resulting in the DMA channel descs_allocated to be 9. Since axi_desc_put() handles the hw_desc considering the descs_allocated, this scenario would result in a kernel panic (hw_desc array will be overrun).

To fix this, the proposal is to add a new member to the axi_dma_desc structure, where we keep the number of allocated hw_descs (axi_desc_alloc()) and use it in axi_desc_put() to handle the hw_desc array correctly.

Additionally I propose to remove the axi_chan_start_first_queued() call after completing the transfer, since it was identified that unbalance can occur (started descriptors can be interrupted and transfer ignored due to DMA channel not being enabled).

---
 drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c | 6 ++----
 drivers/dma/dw-axi-dmac/dw-axi-dmac.h          | 1 +
 2 files changed, 3 insertions(+), 4 deletions(-)
drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c +2 -4
index dd02f84e404d0..72fb40de58b3f 100644
@@ -256,6 +256,7 @@ static struct axi_dma_desc *axi_desc_alloc(u32 num)
 		kfree(desc);
 		return NULL;
 	}
+	desc->nr_hw_descs = num;
 
 	return desc;
 }
@@ -282,7 +283,7 @@ static struct axi_dma_lli *axi_desc_get(struct axi_dma_chan *chan,
 static void axi_desc_put(struct axi_dma_desc *desc)
 {
 	struct axi_dma_chan *chan = desc->chan;
-	int count = atomic_read(&chan->descs_allocated);
+	int count = desc->nr_hw_descs;
 	struct axi_dma_hw_desc *hw_desc;
 	int descs_put;
 
@@ -1093,9 +1094,6 @@ static void axi_chan_block_xfer_complete(struct axi_dma_chan *chan)
 		/* Remove the completed descriptor from issued list before completing */
 		list_del(&vd->node);
 		vchan_cookie_complete(vd);
-
-		/* Submit queued descriptors after processing the completed ones */
-		axi_chan_start_first_queued(chan);
 	}
 
 out:
drivers/dma/dw-axi-dmac/dw-axi-dmac.h +1 -0
index eb267cb24f670..8521530a34ec4 100644
@@ -104,6 +104,7 @@ struct axi_dma_desc {
 	u32				completed_blocks;
 	u32				length;
 	u32				period_len;
+	u32				nr_hw_descs;
 };
 
 struct axi_dma_chan_config {
Signature · 1 line
2.43.0
author maintainer
#4 lore raw

PATCH 5/20 usb: dwc3: pci: Don't set "linux,phy_charger_detect" property on Lenovo Yoga Tab2 1380

In reply to Sasha Levin

From: Hans de Goede <[email protected]>

[ Upstream commit 0fb782b5d5c462b2518b3b4fe7d652114c28d613 ]

The Lenovo Yoga Tablet 2 Pro 1380 model is the exception to the rule that devices which use the Crystal Cove PMIC without using ACPI for battery and AC power_supply class support use the USB-phy for charger detection.

Unlike the Lenovo Yoga Tablet 2 830 / 1050 models this model has an extra LC824206XA Micro USB switch which does the charger detection.

Add a DMI quirk to not set the "linux,phy_charger_detect" property on the 1380 model. This quirk matches on the BIOS version to differentiate the 1380 model from the 830 and 1050 models which otherwise have the same DMI strings.

---
 drivers/usb/dwc3/dwc3-pci.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)
drivers/usb/dwc3/dwc3-pci.c +7 -1
index 497deed38c0c1..9ef821ca2fc71 100644
@@ -8,6 +8,7 @@
  *	    Sebastian Andrzej Siewior <[email protected]>
  */
 
+#include <linux/dmi.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/slab.h>
@@ -220,6 +221,7 @@ static int dwc3_pci_quirks(struct dwc3_pci *dwc,
 
 		if (pdev->device == PCI_DEVICE_ID_INTEL_BYT) {
 			struct gpio_desc *gpio;
+			const char *bios_ver;
 			int ret;
 
 			/* On BYT the FW does not always enable the refclock */
@@ -277,8 +279,12 @@ static int dwc3_pci_quirks(struct dwc3_pci *dwc,
 			 * detection. These can be identified by them _not_
 			 * using the standard ACPI battery and ac drivers.
 			 */
+			bios_ver = dmi_get_system_info(DMI_BIOS_VERSION);
 			if (acpi_dev_present("INT33FD", "1", 2) &&
-			    acpi_quirk_skip_acpi_ac_and_battery()) {
+			    acpi_quirk_skip_acpi_ac_and_battery() &&
+			    /* Lenovo Yoga Tablet 2 Pro 1380 uses LC824206XA instead */
+			    !(bios_ver &&
+			      strstarts(bios_ver, "BLADE_21.X64.0005.R00.1504101516"))) {
 				dev_info(&pdev->dev, "Using TUSB1211 phy for charger detection\n");
 				swnode = &dwc3_pci_intel_phy_charger_detect_swnode;
 			}
Signature · 1 line
2.43.0
author maintainer
#5 lore raw

PATCH 6/20 usb: typec: ucsi_glink: drop special handling for CCI_BUSY

In reply to Sasha Levin

From: Dmitry Baryshkov <[email protected]>

[ Upstream commit 1a395af9d53c6240bf7799abc43b4dc292ca9dd0 ]

Newer Qualcomm platforms (sm8450+) successfully handle busy state and send the Command Completion after sending the Busy state. Older devices have firmware bug and can not continue after sending the CCI_BUSY state, but the command that leads to CCI_BUSY is already forbidden by the NO_PARTNER_PDOS quirk.

Follow other UCSI glue drivers and drop special handling for CCI_BUSY event. Let the UCSI core properly handle this state.

---
 drivers/usb/typec/ucsi/ucsi_glink.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)
drivers/usb/typec/ucsi/ucsi_glink.c +3 -5
index 894622b6556a6..ee239a6b8f61a 100644
@@ -175,7 +175,8 @@ static int pmic_glink_ucsi_sync_write(struct ucsi *__ucsi, unsigned int offset,
 	left = wait_for_completion_timeout(&ucsi->sync_ack, 5 * HZ);
 	if (!left) {
 		dev_err(ucsi->dev, "timeout waiting for UCSI sync write response\n");
-		ret = -ETIMEDOUT;
+		/* return 0 here and let core UCSI code handle the CCI_BUSY */
+		ret = 0;
 	} else if (ucsi->sync_val) {
 		dev_err(ucsi->dev, "sync write returned: %d\n", ucsi->sync_val);
 	}
@@ -242,10 +243,7 @@ static void pmic_glink_ucsi_notify(struct work_struct *work)
 		ucsi_connector_change(ucsi->ucsi, con_num);
 	}
 
-	if (ucsi->sync_pending && cci & UCSI_CCI_BUSY) {
-		ucsi->sync_val = -EBUSY;
-		complete(&ucsi->sync_ack);
-	} else if (ucsi->sync_pending &&
+	if (ucsi->sync_pending &&
 		   (cci & (UCSI_CCI_ACK_COMPLETE | UCSI_CCI_COMMAND_COMPLETE))) {
 		complete(&ucsi->sync_ack);
 	}
Signature · 1 line
2.43.0
author maintainer
#6 lore raw

PATCH 7/20 udf: udftime: prevent overflow in udf_disk_stamp_to_time()

In reply to Sasha Levin

From: Roman Smirnov <[email protected]>

[ Upstream commit 3b84adf460381169c085e4bc09e7b57e9e16db0a ]

An overflow can occur in a situation where src.centiseconds takes the value of 255. This situation is unlikely, but there is no validation check anywere in the code.

Found by Linux Verification Center (linuxtesting.org) with Svace.

Message-Id: <[email protected]>

---
 fs/udf/udftime.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)
fs/udf/udftime.c +8 -3
index 758163af39c26..78ecc633606fb 100644
@@ -46,13 +46,18 @@ udf_disk_stamp_to_time(struct timespec64 *dest, struct timestamp src)
 	dest->tv_sec = mktime64(year, src.month, src.day, src.hour, src.minute,
 			src.second);
 	dest->tv_sec -= offset * 60;
-	dest->tv_nsec = 1000 * (src.centiseconds * 10000 +
-			src.hundredsOfMicroseconds * 100 + src.microseconds);
+
 	/*
 	 * Sanitize nanosecond field since reportedly some filesystems are
 	 * recorded with bogus sub-second values.
 	 */
-	dest->tv_nsec %= NSEC_PER_SEC;
+	if (src.centiseconds < 100 && src.hundredsOfMicroseconds < 100 &&
+	    src.microseconds < 100) {
+		dest->tv_nsec = 1000 * (src.centiseconds * 10000 +
+			src.hundredsOfMicroseconds * 100 + src.microseconds);
+	} else {
+		dest->tv_nsec = 0;
+	}
 }
 
 void
Signature · 1 line
2.43.0
author maintainer
#7 lore raw

PATCH 8/20 PCI/PM: Avoid D3cold for HP Pavilion 17 PC/1972 PCIe Ports

In reply to Sasha Levin

From: Mario Limonciello <[email protected]>

[ Upstream commit 256df20c590bf0e4d63ac69330cf23faddac3e08 ]

Hewlett-Packard HP Pavilion 17 Notebook PC/1972 is an Intel Ivy Bridge system with a muxless AMD Radeon dGPU. Attempting to use the dGPU fails with the following sequence:

ACPI Error: Aborting method \AMD3._ON due to previous error (AE_AML_LOOP_TIMEOUT) (20230628/psparse-529) radeon 0000:01:00.0: not ready 1023ms after resume; waiting
radeon 0000:01:00.0: not ready 2047ms after resume; waiting
radeon 0000:01:00.0: not ready 4095ms after resume; waiting
radeon 0000:01:00.0: not ready 8191ms after resume; waiting
radeon 0000:01:00.0: not ready 16383ms after resume; waiting
radeon 0000:01:00.0: not ready 32767ms after resume; waiting
radeon 0000:01:00.0: not ready 65535ms after resume; giving up
radeon 0000:01:00.0: Unable to change power state from D3cold to D0, device inaccessible

The issue is that the Root Port the dGPU is connected to can't handle the transition from D3cold to D0 so the dGPU can't properly exit runtime PM.

The existing logic in pci_bridge_d3_possible() checks for systems that are newer than 2015 to decide that D3 is safe. This would nominally work for an Ivy Bridge system (which was discontinued in 2015), but this system appears to have continued to receive BIOS updates until 2017 and so this existing logic doesn't appropriately capture it.

Add the system to bridge_d3_blacklist to prevent D3cold from being used.

---
 drivers/pci/pci.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)
drivers/pci/pci.c +12 -0
index dddd30deea32b..26c9d16cb60c3 100644
@@ -3040,6 +3040,18 @@ static const struct dmi_system_id bridge_d3_blacklist[] = {
 			DMI_MATCH(DMI_BOARD_VERSION, "Continental Z2"),
 		},
 	},
+	{
+		/*
+		 * Changing power state of root port dGPU is connected fails
+		 * https://gitlab.freedesktop.org/drm/amd/-/issues/3229
+		 */
+		.ident = "Hewlett-Packard HP Pavilion 17 Notebook PC/1972",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
+			DMI_MATCH(DMI_BOARD_NAME, "1972"),
+			DMI_MATCH(DMI_BOARD_VERSION, "95.33"),
+		},
+	},
 #endif
 	{ }
 };
Signature · 1 line
2.43.0
author maintainer
#8 lore raw

PATCH 9/20 f2fs: don't set RO when shutting down f2fs

In reply to Sasha Levin

From: Jaegeuk Kim <[email protected]>

[ Upstream commit 3bdb7f161697e2d5123b89fe1778ef17a44858e7 ]

Shutdown does not check the error of thaw_super due to readonly, which causes a deadlock like below.

f2fs_ioc_shutdown(F2FS_GOING_DOWN_FULLSYNC) issue_discard_thread
- bdev_freeze
- freeze_super
- f2fs_stop_checkpoint()
- f2fs_handle_critical_error - sb_start_write
- set RO - waiting
- bdev_thaw
- thaw_super_locked
- return -EINVAL, if sb_rdonly()
- f2fs_stop_discard_thread
-> wait for kthread_stop(discard_thread);

---
 fs/f2fs/super.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)
fs/f2fs/super.c +8 -2
index 5d294c8a025ca..ec3f4a5ed2172 100644
@@ -4178,9 +4178,15 @@ void f2fs_handle_critical_error(struct f2fs_sb_info *sbi, unsigned char reason,
 	if (shutdown)
 		set_sbi_flag(sbi, SBI_IS_SHUTDOWN);
 
-	/* continue filesystem operators if errors=continue */
-	if (continue_fs || f2fs_readonly(sb))
+	/*
+	 * Continue filesystem operators if errors=continue. Should not set
+	 * RO by shutdown, since RO bypasses thaw_super which can hang the
+	 * system.
+	 */
+	if (continue_fs || f2fs_readonly(sb) || shutdown) {
+		f2fs_warn(sbi, "Stopped filesystem due to reason: %d", reason);
 		return;
+	}
 
 	f2fs_warn(sbi, "Remounting filesystem read-only");
 	/*
Signature · 1 line
2.43.0
author maintainer
#9 lore raw

PATCH 10/20 MIPS: Octeon: Add PCIe link status check

In reply to Sasha Levin

From: Songyang Li <[email protected]>

[ Upstream commit 29b83a64df3b42c88c0338696feb6fdcd7f1f3b7 ]

The standard PCIe configuration read-write interface is used to access the configuration space of the peripheral PCIe devices of the mips processor after the PCIe link surprise down, it can generate kernel panic caused by "Data bus error". So it is necessary to add PCIe link status check for system protection. When the PCIe link is down or in training, assigning a value of 0 to the configuration address can prevent read-write behavior to the configuration space of peripheral PCIe devices, thereby preventing kernel panic.

---
 arch/mips/pci/pcie-octeon.c | 6 ++++++
 1 file changed, 6 insertions(+)
 mode change 100644 => 100755 arch/mips/pci/pcie-octeon.c
arch/mips/pci/pcie-octeon.c +6 -0
old mode 100644
new mode 100755
index c9edd3fb380df..9eaacd3d33880
@@ -230,12 +230,18 @@ static inline uint64_t __cvmx_pcie_build_config_addr(int pcie_port, int bus,
 {
 	union cvmx_pcie_address pcie_addr;
 	union cvmx_pciercx_cfg006 pciercx_cfg006;
+	union cvmx_pciercx_cfg032 pciercx_cfg032;
 
 	pciercx_cfg006.u32 =
 	    cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG006(pcie_port));
 	if ((bus <= pciercx_cfg006.s.pbnum) && (dev != 0))
 		return 0;
 
+	pciercx_cfg032.u32 =
+		cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG032(pcie_port));
+	if ((pciercx_cfg032.s.dlla == 0) || (pciercx_cfg032.s.lt == 1))
+		return 0;
+
 	pcie_addr.u64 = 0;
 	pcie_addr.config.upper = 2;
 	pcie_addr.config.io = 1;
Signature · 1 line
2.43.0
author maintainer
#10 lore raw

PATCH 11/20 serial: imx: Introduce timeout when waiting on transmitter empty

In reply to Sasha Levin

From: Esben Haabendal <[email protected]>

[ Upstream commit e533e4c62e9993e62e947ae9bbec34e4c7ae81c2 ]

By waiting at most 1 second for USR2_TXDC to be set, we avoid a potential deadlock.

In case of the timeout, there is not much we can do, so we simply ignore the transmitter state and optimistically try to continue.

---
 drivers/tty/serial/imx.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
drivers/tty/serial/imx.c +4 -3
index c77831e91ec20..a1476e47c6aab 100644
@@ -26,6 +26,7 @@
 #include <linux/slab.h>
 #include <linux/of.h>
 #include <linux/io.h>
+#include <linux/iopoll.h>
 #include <linux/dma-mapping.h>
 
 #include <asm/irq.h>
@@ -2009,7 +2010,7 @@ imx_uart_console_write(struct console *co, const char *s, unsigned int count)
 	struct imx_port *sport = imx_uart_ports[co->index];
 	struct imx_port_ucrs old_ucr;
 	unsigned long flags;
-	unsigned int ucr1;
+	unsigned int ucr1, usr2;
 	int locked = 1;
 
 	if (sport->port.sysrq)
@@ -2040,8 +2041,8 @@ imx_uart_console_write(struct console *co, const char *s, unsigned int count)
 	 *	Finally, wait for transmitter to become empty
 	 *	and restore UCR1/2/3
 	 */
-	while (!(imx_uart_readl(sport, USR2) & USR2_TXDC));
-
+	read_poll_timeout_atomic(imx_uart_readl, usr2, usr2 & USR2_TXDC,
+				 0, USEC_PER_SEC, false, sport, USR2);
 	imx_uart_ucrs_restore(sport, &old_ucr);
 
 	if (locked)
Signature · 1 line
2.43.0
author maintainer
#11 lore raw

PATCH 12/20 serial: exar: adding missing CTI and Exar PCI ids

In reply to Sasha Levin

From: Parker Newman <[email protected]>

[ Upstream commit b86ae40ffcf5a16b9569b1016da4a08c4f352ca2 ]

- Added Connect Tech and Exar IDs not already in pci_ids.h

---
 drivers/tty/serial/8250/8250_exar.c | 42 +++++++++++++++++++++++++++++
 1 file changed, 42 insertions(+)
drivers/tty/serial/8250/8250_exar.c +42 -0
index 4d20f3aa280cd..27430fdd9e761 100644
@@ -41,8 +41,50 @@
 #define PCI_DEVICE_ID_COMMTECH_4228PCIE		0x0021
 #define PCI_DEVICE_ID_COMMTECH_4222PCIE		0x0022
 
+#define PCI_VENDOR_ID_CONNECT_TECH				0x12c4
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_SP_OPTO        0x0340
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_SP_OPTO_A      0x0341
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_SP_OPTO_B      0x0342
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_XPRS           0x0350
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_XPRS_A         0x0351
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_XPRS_B         0x0352
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_XPRS           0x0353
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_16_XPRS_A        0x0354
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_16_XPRS_B        0x0355
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_XPRS_OPTO      0x0360
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_XPRS_OPTO_A    0x0361
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_XPRS_OPTO_B    0x0362
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_SP             0x0370
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_SP_232         0x0371
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_SP_485         0x0372
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_4_SP           0x0373
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_6_2_SP           0x0374
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_6_SP           0x0375
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_SP_232_NS      0x0376
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_XP_OPTO_LEFT   0x0380
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_XP_OPTO_RIGHT  0x0381
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_XP_OPTO        0x0382
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_4_XPRS_OPTO    0x0392
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_XPRS_LP        0x03A0
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_XPRS_LP_232    0x03A1
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_XPRS_LP_485    0x03A2
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_XPRS_LP_232_NS 0x03A3
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCIE_XEG001               0x0602
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCIE_XR35X_BASE           0x1000
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCIE_XR35X_2              0x1002
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCIE_XR35X_4              0x1004
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCIE_XR35X_8              0x1008
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCIE_XR35X_12             0x100C
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCIE_XR35X_16             0x1010
+#define PCI_DEVICE_ID_CONNECT_TECH_PCI_XR79X_12_XIG00X          0x110c
+#define PCI_DEVICE_ID_CONNECT_TECH_PCI_XR79X_12_XIG01X          0x110d
+#define PCI_DEVICE_ID_CONNECT_TECH_PCI_XR79X_16                 0x1110
+
 #define PCI_DEVICE_ID_EXAR_XR17V4358		0x4358
 #define PCI_DEVICE_ID_EXAR_XR17V8358		0x8358
+#define PCI_DEVICE_ID_EXAR_XR17V252		0x0252
+#define PCI_DEVICE_ID_EXAR_XR17V254		0x0254
+#define PCI_DEVICE_ID_EXAR_XR17V258		0x0258
 
 #define PCI_SUBDEVICE_ID_USR_2980		0x0128
 #define PCI_SUBDEVICE_ID_USR_2981		0x0129
Signature · 1 line
2.43.0
author maintainer
#12 lore raw

PATCH 13/20 usb: gadget: function: Remove usage of the deprecated ida_simple_xx() API

In reply to Sasha Levin

From: Christophe JAILLET <[email protected]>

[ Upstream commit 920e7522e3bab5ebc2fb0cc1a034f4470c87fa97 ]

ida_alloc() and ida_free() should be preferred to the deprecated ida_simple_get() and ida_simple_remove().

Note that the upper limit of ida_simple_get() is exclusive, but the one of ida_alloc_max() is inclusive. So a -1 has been added when needed.

---
 drivers/usb/gadget/function/f_hid.c     | 6 +++---
 drivers/usb/gadget/function/f_printer.c | 6 +++---
 drivers/usb/gadget/function/rndis.c     | 4 ++--
 3 files changed, 8 insertions(+), 8 deletions(-)
drivers/usb/gadget/function/f_hid.c +3 -3
index 3c8a9dd585c09..2db01e03bfbf0 100644
@@ -1029,9 +1029,9 @@ static inline int hidg_get_minor(void)
 {
 	int ret;
 
-	ret = ida_simple_get(&hidg_ida, 0, 0, GFP_KERNEL);
+	ret = ida_alloc(&hidg_ida, GFP_KERNEL);
 	if (ret >= HIDG_MINORS) {
-		ida_simple_remove(&hidg_ida, ret);
+		ida_free(&hidg_ida, ret);
 		ret = -ENODEV;
 	}
 
@@ -1176,7 +1176,7 @@ static const struct config_item_type hid_func_type = {
 
 static inline void hidg_put_minor(int minor)
 {
-	ida_simple_remove(&hidg_ida, minor);
+	ida_free(&hidg_ida, minor);
 }
 
 static void hidg_free_inst(struct usb_function_instance *f)
drivers/usb/gadget/function/f_printer.c +3 -3
index 076dd4c1be96c..ba7d180cc9e6d 100644
@@ -1312,9 +1312,9 @@ static inline int gprinter_get_minor(void)
 {
 	int ret;
 
-	ret = ida_simple_get(&printer_ida, 0, 0, GFP_KERNEL);
+	ret = ida_alloc(&printer_ida, GFP_KERNEL);
 	if (ret >= PRINTER_MINORS) {
-		ida_simple_remove(&printer_ida, ret);
+		ida_free(&printer_ida, ret);
 		ret = -ENODEV;
 	}
 
@@ -1323,7 +1323,7 @@ static inline int gprinter_get_minor(void)
 
 static inline void gprinter_put_minor(int minor)
 {
-	ida_simple_remove(&printer_ida, minor);
+	ida_free(&printer_ida, minor);
 }
 
 static int gprinter_setup(int);
drivers/usb/gadget/function/rndis.c +2 -2
index 29bf8664bf582..12c5d9cf450c1 100644
@@ -869,12 +869,12 @@ EXPORT_SYMBOL_GPL(rndis_msg_parser);
 
 static inline int rndis_get_nr(void)
 {
-	return ida_simple_get(&rndis_ida, 0, 1000, GFP_KERNEL);
+	return ida_alloc_max(&rndis_ida, 999, GFP_KERNEL);
 }
 
 static inline void rndis_put_nr(int nr)
 {
-	ida_simple_remove(&rndis_ida, nr);
+	ida_free(&rndis_ida, nr);
 }
 
 struct rndis_params *rndis_register(void (*resp_avail)(void *v), void *v)
Signature · 1 line
2.43.0
author maintainer
#13 lore raw

PATCH 14/20 f2fs: fix to do sanity check on i_xattr_nid in sanity_check_inode()

In reply to Sasha Levin

From: Chao Yu <[email protected]>

[ Upstream commit 20faaf30e55522bba2b56d9c46689233205d7717 ]

syzbot reports a kernel bug as below:

F2FS-fs (loop0): Mounted with checkpoint version = 48b305e4
==================================================================

BUG: KASAN: slab-out-of-bounds in f2fs_test_bit fs/f2fs/f2fs.h:2933 [inline]
BUG: KASAN: slab-out-of-bounds in current_nat_addr fs/f2fs/node.h:213 [inline]
BUG: KASAN: slab-out-of-bounds in f2fs_get_node_info+0xece/0x1200 fs/f2fs/node.c:600
Read of size 1 at addr ffff88807a58c76c by task syz-executor280/5076

CPU: 1 PID: 5076 Comm: syz-executor280 Not tainted 6.9.0-rc5-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114
 print_address_description mm/kasan/report.c:377 [inline]
 print_report+0x169/0x550 mm/kasan/report.c:488
 kasan_report+0x143/0x180 mm/kasan/report.c:601
 f2fs_test_bit fs/f2fs/f2fs.h:2933 [inline]
 current_nat_addr fs/f2fs/node.h:213 [inline]
 f2fs_get_node_info+0xece/0x1200 fs/f2fs/node.c:600
 f2fs_xattr_fiemap fs/f2fs/data.c:1848 [inline]
 f2fs_fiemap+0x55d/0x1ee0 fs/f2fs/data.c:1925
 ioctl_fiemap fs/ioctl.c:220 [inline]
 do_vfs_ioctl+0x1c07/0x2e50 fs/ioctl.c:838
 __do_sys_ioctl fs/ioctl.c:902 [inline]
 __se_sys_ioctl+0x81/0x170 fs/ioctl.c:890
 do_syscall_x64 arch/x86/entry/common.c:52 [inline]
 do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x77/0x7f

The root cause is we missed to do sanity check on i_xattr_nid during f2fs_iget(), so that in fiemap() path, current_nat_addr() will access nat_bitmap w/ offset from invalid i_xattr_nid, result in triggering kasan bug report, fix it.

---
 fs/f2fs/inode.c | 6 ++++++
 1 file changed, 6 insertions(+)
fs/f2fs/inode.c +6 -0
index dd61449f05b85..ab2eecd986ec5 100644
@@ -361,6 +361,12 @@ static bool sanity_check_inode(struct inode *inode, struct page *node_page)
 		return false;
 	}
 
+	if (fi->i_xattr_nid && f2fs_check_nid_range(sbi, fi->i_xattr_nid)) {
+		f2fs_warn(sbi, "%s: inode (ino=%lx) has corrupted i_xattr_nid: %u, run fsck to fix.",
+			  __func__, inode->i_ino, fi->i_xattr_nid);
+		return false;
+	}
+
 	return true;
 }
 
Signature · 1 line
2.43.0
author maintainer
#14 lore raw

PATCH 15/20 tty: add the option to have a tty reject a new ldisc

In reply to Sasha Levin

From: Linus Torvalds <[email protected]>

[ Upstream commit 6bd23e0c2bb6c65d4f5754d1456bc9a4427fc59b ]

... and use it to limit the virtual terminals to just N_TTY. They are kind of special, and in particular, the "con_write()" routine violates the "writes cannot sleep" rule that some ldiscs rely on.

This avoids the

   BUG: sleeping function called from invalid context at kernel/printk/printk.c:2659

when N_GSM has been attached to a virtual console, and gsmld_write() calls con_write() while holding a spinlock, and con_write() then tries to get the console lock.

---
 drivers/tty/tty_ldisc.c    |  6 ++++++
 drivers/tty/vt/vt.c        | 10 ++++++++++
 include/linux/tty_driver.h |  8 ++++++++
 3 files changed, 24 insertions(+)
drivers/tty/tty_ldisc.c +6 -0
index 3f68e213df1f7..d80e9d4c974b4 100644
@@ -545,6 +545,12 @@ int tty_set_ldisc(struct tty_struct *tty, int disc)
 		goto out;
 	}
 
+	if (tty->ops->ldisc_ok) {
+		retval = tty->ops->ldisc_ok(tty, disc);
+		if (retval)
+			goto out;
+	}
+
 	old_ldisc = tty->ldisc;
 
 	/* Shutdown the old discipline. */
drivers/tty/vt/vt.c +10 -0
index e66ff9c11dade..a22da757ca6d1 100644
@@ -3390,6 +3390,15 @@ static void con_cleanup(struct tty_struct *tty)
 	tty_port_put(&vc->port);
 }
 
+/*
+ * We can't deal with anything but the N_TTY ldisc,
+ * because we can sleep in our write() routine.
+ */
+static int con_ldisc_ok(struct tty_struct *tty, int ldisc)
+{
+	return ldisc == N_TTY ? 0 : -EINVAL;
+}
+
 static int default_color           = 7; /* white */
 static int default_italic_color    = 2; // green (ASCII)
 static int default_underline_color = 3; // cyan (ASCII)
@@ -3509,6 +3518,7 @@ static const struct tty_operations con_ops = {
 	.resize = vt_resize,
 	.shutdown = con_shutdown,
 	.cleanup = con_cleanup,
+	.ldisc_ok = con_ldisc_ok,
 };
 
 static struct cdev vc0_cdev;
include/linux/tty_driver.h +8 -0
index 18beff0cec1ab..b4f99f6a5385a 100644
@@ -155,6 +155,13 @@ struct serial_struct;
  *
  *	Optional. Called under the @tty->termios_rwsem. May sleep.
  *
+ * @ldisc_ok: ``int ()(struct tty_struct *tty, int ldisc)``
+ *
+ *	This routine allows the @tty driver to decide if it can deal
+ *	with a particular @ldisc.
+ *
+ *	Optional. Called under the @tty->ldisc_sem and @tty->termios_rwsem.
+ *
  * @set_ldisc: ``void ()(struct tty_struct *tty)``
  *
  *	This routine allows the @tty driver to be notified when the device's
@@ -373,6 +380,7 @@ struct tty_operations {
 	void (*hangup)(struct tty_struct *tty);
 	int (*break_ctl)(struct tty_struct *tty, int state);
 	void (*flush_buffer)(struct tty_struct *tty);
+	int (*ldisc_ok)(struct tty_struct *tty, int ldisc);
 	void (*set_ldisc)(struct tty_struct *tty);
 	void (*wait_until_sent)(struct tty_struct *tty, int timeout);
 	void (*send_xchar)(struct tty_struct *tty, char ch);
Signature · 1 line
2.43.0
author maintainer
#15 lore raw

PATCH 16/20 greybus: Fix use-after-free bug in gb_interface_release due to race condition.

In reply to Sasha Levin

From: Sicong Huang <[email protected]>

[ Upstream commit 5c9c5d7f26acc2c669c1dcf57d1bb43ee99220ce ]

In gb_interface_create, &intf->mode_switch_completion is bound with gb_interface_mode_switch_work. Then it will be started by gb_interface_request_mode_switch. Here is the relevant code.

if (!queue_work(system_long_wq, &intf->mode_switch_work)) {
	...
}

If we call gb_interface_release to make cleanup, there may be an unfinished work. This function will call kfree to free the object "intf". However, if gb_interface_mode_switch_work is scheduled to run after kfree, it may cause use-after-free error as gb_interface_mode_switch_work will use the object "intf". The possible execution flow that may lead to the issue is as follows:

CPU0 CPU1

                            |   gb_interface_create
                            |   gb_interface_request_mode_switch
gb_interface_release        |
kfree(intf) (free)          |
                            |   gb_interface_mode_switch_work
                            |   mutex_lock(&intf->mutex) (use)

Fix it by canceling the work before kfree.

---
 drivers/greybus/interface.c | 1 +
 1 file changed, 1 insertion(+)
drivers/greybus/interface.c +1 -0
index 9ec949a438ef6..52ef6be9d4499 100644
@@ -694,6 +694,7 @@ static void gb_interface_release(struct device *dev)
 
 	trace_gb_interface_release(intf);
 
+	cancel_work_sync(&intf->mode_switch_work);
 	kfree(intf);
 }
 
Signature · 1 line
2.43.0
author maintainer
#16 lore raw

PATCH 17/20 vfio/pci: Collect hot-reset devices to local buffer

In reply to Sasha Levin

From: Alex Williamson <[email protected]>

[ Upstream commit f6944d4a0b87c16bc34ae589169e1ded3d4db08e ]

Lockdep reports the below circular locking dependency issue. The mmap_lock acquisition while holding pci_bus_sem is due to the use of copy_to_user() from within a pci_walk_bus() callback.

Building the devices array directly into the user buffer is only for convenience. Instead we can allocate a local buffer for the array, bounded by the number of devices on the bus/slot, fill the device information into this local buffer, then copy it into the user buffer outside the bus walk callback.

======================================================
WARNING: possible circular locking dependency detected
6.9.0-rc5+ #39 Not tainted
------------------------------------------------------
CPU 0/KVM/4113 is trying to acquire lock:
ffff99a609ee18a8 (&vdev->vma_lock){+.+.}-{4:4}, at: vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core]

but task is already holding lock:
ffff99a243a052a0 (&mm->mmap_lock){++++}-{4:4}, at: vaddr_get_pfns+0x3f/0x170 [vfio_iommu_type1]

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #3 (&mm->mmap_lock){++++}-{4:4}:

       __lock_acquire+0x4e4/0xb90
       lock_acquire+0xbc/0x2d0
       __might_fault+0x5c/0x80
       _copy_to_user+0x1e/0x60
       vfio_pci_fill_devs+0x9f/0x130 [vfio_pci_core]
       vfio_pci_walk_wrapper+0x45/0x60 [vfio_pci_core]
       __pci_walk_bus+0x6b/0xb0
       vfio_pci_ioctl_get_pci_hot_reset_info+0x10b/0x1d0 [vfio_pci_core]
       vfio_pci_core_ioctl+0x1cb/0x400 [vfio_pci_core]
       vfio_device_fops_unl_ioctl+0x7e/0x140 [vfio]
       __x64_sys_ioctl+0x8a/0xc0
       do_syscall_64+0x8d/0x170
       entry_SYSCALL_64_after_hwframe+0x76/0x7e

-> #2 (pci_bus_sem){++++}-{4:4}:

       __lock_acquire+0x4e4/0xb90
       lock_acquire+0xbc/0x2d0
       down_read+0x3e/0x160
       pci_bridge_wait_for_secondary_bus.part.0+0x33/0x2d0
       pci_reset_bus+0xdd/0x160
       vfio_pci_dev_set_hot_reset+0x256/0x270 [vfio_pci_core]
       vfio_pci_ioctl_pci_hot_reset_groups+0x1a3/0x280 [vfio_pci_core]
       vfio_pci_core_ioctl+0x3b5/0x400 [vfio_pci_core]
       vfio_device_fops_unl_ioctl+0x7e/0x140 [vfio]
       __x64_sys_ioctl+0x8a/0xc0
       do_syscall_64+0x8d/0x170
       entry_SYSCALL_64_after_hwframe+0x76/0x7e

-> #1 (&vdev->memory_lock){+.+.}-{4:4}:

       __lock_acquire+0x4e4/0xb90
       lock_acquire+0xbc/0x2d0
       down_write+0x3b/0xc0
       vfio_pci_zap_and_down_write_memory_lock+0x1c/0x30 [vfio_pci_core]
       vfio_basic_config_write+0x281/0x340 [vfio_pci_core]
       vfio_config_do_rw+0x1fa/0x300 [vfio_pci_core]
       vfio_pci_config_rw+0x75/0xe50 [vfio_pci_core]
       vfio_pci_rw+0xea/0x1a0 [vfio_pci_core]
       vfs_write+0xea/0x520
       __x64_sys_pwrite64+0x90/0xc0
       do_syscall_64+0x8d/0x170
       entry_SYSCALL_64_after_hwframe+0x76/0x7e

-> #0 (&vdev->vma_lock){+.+.}-{4:4}:

       check_prev_add+0xeb/0xcc0
       validate_chain+0x465/0x530
       __lock_acquire+0x4e4/0xb90
       lock_acquire+0xbc/0x2d0
       __mutex_lock+0x97/0xde0
       vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core]
       __do_fault+0x31/0x160
       do_pte_missing+0x65/0x3b0
       __handle_mm_fault+0x303/0x720
       handle_mm_fault+0x10f/0x460
       fixup_user_fault+0x7f/0x1f0
       follow_fault_pfn+0x66/0x1c0 [vfio_iommu_type1]
       vaddr_get_pfns+0xf2/0x170 [vfio_iommu_type1]
       vfio_pin_pages_remote+0x348/0x4e0 [vfio_iommu_type1]
       vfio_pin_map_dma+0xd2/0x330 [vfio_iommu_type1]
       vfio_dma_do_map+0x2c0/0x440 [vfio_iommu_type1]
       vfio_iommu_type1_ioctl+0xc5/0x1d0 [vfio_iommu_type1]
       __x64_sys_ioctl+0x8a/0xc0
       do_syscall_64+0x8d/0x170
       entry_SYSCALL_64_after_hwframe+0x76/0x7e

other info that might help us debug this:

Chain exists of:
  &vdev->vma_lock --> pci_bus_sem --> &mm->mmap_lock

 Possible unsafe locking scenario:

block dm-0: the capability attribute has been deprecated.

       CPU0                    CPU1
       ----                    ----
  rlock(&mm->mmap_lock);
                               lock(pci_bus_sem);
                               lock(&mm->mmap_lock);

lock(&vdev->vma_lock);

*** DEADLOCK ***

2 locks held by CPU 0/KVM/4113:
#0: ffff99a25f294888 (&iommu->lock#2){+.+.}-{4:4}, at: vfio_dma_do_map+0x60/0x440 [vfio_iommu_type1] #1: ffff99a243a052a0 (&mm->mmap_lock){++++}-{4:4}, at: vaddr_get_pfns+0x3f/0x170 [vfio_iommu_type1]

stack backtrace:
CPU: 1 PID: 4113 Comm: CPU 0/KVM Not tainted 6.9.0-rc5+ #39
Hardware name: Dell Inc. PowerEdge T640/04WYPY, BIOS 2.15.1 06/16/2022
Call Trace:
 <TASK>
 dump_stack_lvl+0x64/0xa0
 check_noncircular+0x131/0x150
 check_prev_add+0xeb/0xcc0
 ? add_chain_cache+0x10a/0x2f0
 ? __lock_acquire+0x4e4/0xb90
 validate_chain+0x465/0x530
 __lock_acquire+0x4e4/0xb90
 lock_acquire+0xbc/0x2d0
 ? vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core]
 ? lock_is_held_type+0x9a/0x110
 __mutex_lock+0x97/0xde0
 ? vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core]
 ? lock_acquire+0xbc/0x2d0
 ? vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core]
 ? find_held_lock+0x2b/0x80
 ? vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core]
 vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core]
 __do_fault+0x31/0x160
 do_pte_missing+0x65/0x3b0
 __handle_mm_fault+0x303/0x720
 handle_mm_fault+0x10f/0x460
 fixup_user_fault+0x7f/0x1f0
 follow_fault_pfn+0x66/0x1c0 [vfio_iommu_type1]
 vaddr_get_pfns+0xf2/0x170 [vfio_iommu_type1]
 vfio_pin_pages_remote+0x348/0x4e0 [vfio_iommu_type1]
 vfio_pin_map_dma+0xd2/0x330 [vfio_iommu_type1]
 vfio_dma_do_map+0x2c0/0x440 [vfio_iommu_type1]
 vfio_iommu_type1_ioctl+0xc5/0x1d0 [vfio_iommu_type1]
 __x64_sys_ioctl+0x8a/0xc0
 do_syscall_64+0x8d/0x170
 ? rcu_core+0x8d/0x250
 ? __lock_release+0x5e/0x160
 ? rcu_core+0x8d/0x250
 ? lock_release+0x5f/0x120
 ? sched_clock+0xc/0x30
 ? sched_clock_cpu+0xb/0x190
 ? irqtime_account_irq+0x40/0xc0
 ? __local_bh_enable+0x54/0x60
 ? __do_softirq+0x315/0x3ca
 ? lockdep_hardirqs_on_prepare.part.0+0x97/0x140
 entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f8300d0357b
Code: ff ff ff 85 c0 79 9b 49 c7 c4 ff ff ff ff 5b 5d 4c 89 e0 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 75 68 0f 00 f7 d8 64 89 01 48
RSP: 002b:00007f82ef3fb948 EFLAGS: 00000206 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f8300d0357b
RDX: 00007f82ef3fb990 RSI: 0000000000003b71 RDI: 0000000000000023
RBP: 00007f82ef3fb9c0 R08: 0000000000000000 R09: 0000561b7e0bcac2
R10: 0000000000000000 R11: 0000000000000206 R12: 0000000000000000
R13: 0000000200000000 R14: 0000381800000000 R15: 0000000000000000
 </TASK>
---
 drivers/vfio/pci/vfio_pci_core.c | 78 ++++++++++++++++++++------------
 1 file changed, 49 insertions(+), 29 deletions(-)
drivers/vfio/pci/vfio_pci_core.c +49 -29
index 1929103ee59a3..a3c545dd174ee 100644
@@ -778,25 +778,26 @@ static int vfio_pci_count_devs(struct pci_dev *pdev, void *data)
 }
 
 struct vfio_pci_fill_info {
-	struct vfio_pci_dependent_device __user *devices;
-	struct vfio_pci_dependent_device __user *devices_end;
 	struct vfio_device *vdev;
+	struct vfio_pci_dependent_device *devices;
+	int nr_devices;
 	u32 count;
 	u32 flags;
 };
 
 static int vfio_pci_fill_devs(struct pci_dev *pdev, void *data)
 {
-	struct vfio_pci_dependent_device info = {
-		.segment = pci_domain_nr(pdev->bus),
-		.bus = pdev->bus->number,
-		.devfn = pdev->devfn,
-	};
+	struct vfio_pci_dependent_device *info;
 	struct vfio_pci_fill_info *fill = data;
 
-	fill->count++;
-	if (fill->devices >= fill->devices_end)
-		return 0;
+	/* The topology changed since we counted devices */
+	if (fill->count >= fill->nr_devices)
+		return -EAGAIN;
+
+	info = &fill->devices[fill->count++];
+	info->segment = pci_domain_nr(pdev->bus);
+	info->bus = pdev->bus->number;
+	info->devfn = pdev->devfn;
 
 	if (fill->flags & VFIO_PCI_HOT_RESET_FLAG_DEV_ID) {
 		struct iommufd_ctx *iommufd = vfio_iommufd_device_ictx(fill->vdev);
@@ -809,19 +810,19 @@ static int vfio_pci_fill_devs(struct pci_dev *pdev, void *data)
 		 */
 		vdev = vfio_find_device_in_devset(dev_set, &pdev->dev);
 		if (!vdev) {
-			info.devid = VFIO_PCI_DEVID_NOT_OWNED;
+			info->devid = VFIO_PCI_DEVID_NOT_OWNED;
 		} else {
 			int id = vfio_iommufd_get_dev_id(vdev, iommufd);
 
 			if (id > 0)
-				info.devid = id;
+				info->devid = id;
 			else if (id == -ENOENT)
-				info.devid = VFIO_PCI_DEVID_OWNED;
+				info->devid = VFIO_PCI_DEVID_OWNED;
 			else
-				info.devid = VFIO_PCI_DEVID_NOT_OWNED;
+				info->devid = VFIO_PCI_DEVID_NOT_OWNED;
 		}
 		/* If devid is VFIO_PCI_DEVID_NOT_OWNED, clear owned flag. */
-		if (info.devid == VFIO_PCI_DEVID_NOT_OWNED)
+		if (info->devid == VFIO_PCI_DEVID_NOT_OWNED)
 			fill->flags &= ~VFIO_PCI_HOT_RESET_FLAG_DEV_ID_OWNED;
 	} else {
 		struct iommu_group *iommu_group;
@@ -830,13 +831,10 @@ static int vfio_pci_fill_devs(struct pci_dev *pdev, void *data)
 		if (!iommu_group)
 			return -EPERM; /* Cannot reset non-isolated devices */
 
-		info.group_id = iommu_group_id(iommu_group);
+		info->group_id = iommu_group_id(iommu_group);
 		iommu_group_put(iommu_group);
 	}
 
-	if (copy_to_user(fill->devices, &info, sizeof(info)))
-		return -EFAULT;
-	fill->devices++;
 	return 0;
 }
 
@@ -1258,10 +1256,11 @@ static int vfio_pci_ioctl_get_pci_hot_reset_info(
 {
 	unsigned long minsz =
 		offsetofend(struct vfio_pci_hot_reset_info, count);
+	struct vfio_pci_dependent_device *devices = NULL;
 	struct vfio_pci_hot_reset_info hdr;
 	struct vfio_pci_fill_info fill = {};
 	bool slot = false;
-	int ret = 0;
+	int ret, count;
 
 	if (copy_from_user(&hdr, arg, minsz))
 		return -EFAULT;
@@ -1277,9 +1276,23 @@ static int vfio_pci_ioctl_get_pci_hot_reset_info(
 	else if (pci_probe_reset_bus(vdev->pdev->bus))
 		return -ENODEV;
 
-	fill.devices = arg->devices;
-	fill.devices_end = arg->devices +
-			   (hdr.argsz - sizeof(hdr)) / sizeof(arg->devices[0]);
+	ret = vfio_pci_for_each_slot_or_bus(vdev->pdev, vfio_pci_count_devs,
+					    &count, slot);
+	if (ret)
+		return ret;
+
+	if (count > (hdr.argsz - sizeof(hdr)) / sizeof(*devices)) {
+		hdr.count = count;
+		ret = -ENOSPC;
+		goto header;
+	}
+
+	devices = kcalloc(count, sizeof(*devices), GFP_KERNEL);
+	if (!devices)
+		return -ENOMEM;
+
+	fill.devices = devices;
+	fill.nr_devices = count;
 	fill.vdev = &vdev->vdev;
 
 	if (vfio_device_cdev_opened(&vdev->vdev))
@@ -1291,16 +1304,23 @@ static int vfio_pci_ioctl_get_pci_hot_reset_info(
 					    &fill, slot);
 	mutex_unlock(&vdev->vdev.dev_set->lock);
 	if (ret)
-		return ret;
+		goto out;
+
+	if (copy_to_user(arg->devices, devices,
+			 sizeof(*devices) * fill.count)) {
+		ret = -EFAULT;
+		goto out;
+	}
 
 	hdr.count = fill.count;
 	hdr.flags = fill.flags;
-	if (copy_to_user(arg, &hdr, minsz))
-		return -EFAULT;
 
-	if (fill.count > fill.devices - arg->devices)
-		return -ENOSPC;
-	return 0;
+header:
+	if (copy_to_user(arg, &hdr, minsz))
+		ret = -EFAULT;
+out:
+	kfree(devices);
+	return ret;
 }
 
 static int
Signature · 1 line
2.43.0
author maintainer
#17 lore raw

PATCH 18/20 cpufreq: amd-pstate: fix memory leak on CPU EPP exit

In reply to Sasha Levin

From: Peng Ma <[email protected]>

[ Upstream commit cea04f3d9aeebda9d9c063c0dfa71e739c322c81 ]

The cpudata memory from kzalloc() in amd_pstate_epp_cpu_init() is not freed in the analogous exit function, so fix that.

---
 drivers/cpufreq/amd-pstate.c | 7 +++++++
 1 file changed, 7 insertions(+)
drivers/cpufreq/amd-pstate.c +7 -0
index 07f3419954396..3efc2aef31ce4 100644
@@ -1216,6 +1216,13 @@ static int amd_pstate_epp_cpu_init(struct cpufreq_policy *policy)
 
 static int amd_pstate_epp_cpu_exit(struct cpufreq_policy *policy)
 {
+	struct amd_cpudata *cpudata = policy->driver_data;
+
+	if (cpudata) {
+		kfree(cpudata);
+		policy->driver_data = NULL;
+	}
+
 	pr_debug("CPU %d exiting\n", policy->cpu);
 	return 0;
 }
Signature · 1 line
2.43.0
author maintainer
#18 lore raw

PATCH 19/20 ACPI: EC: Install address space handler at the namespace root

In reply to Sasha Levin

From: "Rafael J. Wysocki" <[email protected]>

[ Upstream commit 60fa6ae6e6d09e377fce6f8d9b6f6a4d88769f63 ]

It is reported that _DSM evaluation fails in ucsi_acpi_dsm() on Lenovo IdeaPad Pro 5 due to a missing address space handler for the EC address space:

ACPI Error: No handler for Region [ECSI] (000000007b8176ee) [EmbeddedControl] (20230628/evregion-130)

This happens because if there is no ECDT, the EC driver only registers the EC address space handler for operation regions defined in the EC device scope of the ACPI namespace while the operation region being accessed by the _DSM in question is located beyond that scope.

To address this, modify the ACPI EC driver to install the EC address space handler at the root of the ACPI namespace for the first EC that can be found regardless of whether or not an ECDT is present.

Note that this change is consistent with some examples in the ACPI specification in which EC operation regions located outside the EC device scope are used (for example, see Section 9.17.15 in ACPI 6.5), so the current behavior of the EC driver is arguably questionable.

---
 drivers/acpi/ec.c       | 25 ++++++++++++++++---------
 drivers/acpi/internal.h |  1 -
 2 files changed, 16 insertions(+), 10 deletions(-)
drivers/acpi/ec.c +16 -9
index a59c11df73754..0795f92d8927d 100644
@@ -1482,13 +1482,14 @@ static bool install_gpio_irq_event_handler(struct acpi_ec *ec)
 static int ec_install_handlers(struct acpi_ec *ec, struct acpi_device *device,
 			       bool call_reg)
 {
+	acpi_handle scope_handle = ec == first_ec ? ACPI_ROOT_OBJECT : ec->handle;
 	acpi_status status;
 
 	acpi_ec_start(ec, false);
 
 	if (!test_bit(EC_FLAGS_EC_HANDLER_INSTALLED, &ec->flags)) {
 		acpi_ec_enter_noirq(ec);
-		status = acpi_install_address_space_handler_no_reg(ec->handle,
+		status = acpi_install_address_space_handler_no_reg(scope_handle,
 								   ACPI_ADR_SPACE_EC,
 								   &acpi_ec_space_handler,
 								   NULL, ec);
@@ -1497,11 +1498,10 @@ static int ec_install_handlers(struct acpi_ec *ec, struct acpi_device *device,
 			return -ENODEV;
 		}
 		set_bit(EC_FLAGS_EC_HANDLER_INSTALLED, &ec->flags);
-		ec->address_space_handler_holder = ec->handle;
 	}
 
 	if (call_reg && !test_bit(EC_FLAGS_EC_REG_CALLED, &ec->flags)) {
-		acpi_execute_reg_methods(ec->handle, ACPI_ADR_SPACE_EC);
+		acpi_execute_reg_methods(scope_handle, ACPI_ADR_SPACE_EC);
 		set_bit(EC_FLAGS_EC_REG_CALLED, &ec->flags);
 	}
 
@@ -1553,10 +1553,13 @@ static int ec_install_handlers(struct acpi_ec *ec, struct acpi_device *device,
 
 static void ec_remove_handlers(struct acpi_ec *ec)
 {
+	acpi_handle scope_handle = ec == first_ec ? ACPI_ROOT_OBJECT : ec->handle;
+
 	if (test_bit(EC_FLAGS_EC_HANDLER_INSTALLED, &ec->flags)) {
 		if (ACPI_FAILURE(acpi_remove_address_space_handler(
-					ec->address_space_handler_holder,
-					ACPI_ADR_SPACE_EC, &acpi_ec_space_handler)))
+						scope_handle,
+						ACPI_ADR_SPACE_EC,
+						&acpi_ec_space_handler)))
 			pr_err("failed to remove space handler\n");
 		clear_bit(EC_FLAGS_EC_HANDLER_INSTALLED, &ec->flags);
 	}
@@ -1595,14 +1598,18 @@ static int acpi_ec_setup(struct acpi_ec *ec, struct acpi_device *device, bool ca
 {
 	int ret;
 
-	ret = ec_install_handlers(ec, device, call_reg);
-	if (ret)
-		return ret;
-
 	/* First EC capable of handling transactions */
 	if (!first_ec)
 		first_ec = ec;
 
+	ret = ec_install_handlers(ec, device, call_reg);
+	if (ret) {
+		if (ec == first_ec)
+			first_ec = NULL;
+
+		return ret;
+	}
+
 	pr_info("EC_CMD/EC_SC=0x%lx, EC_DATA=0x%lx\n", ec->command_addr,
 		ec->data_addr);
 
drivers/acpi/internal.h +0 -1
index 866c7c4ed2331..6db1a03dd5399 100644
@@ -167,7 +167,6 @@ enum acpi_ec_event_state {
 
 struct acpi_ec {
 	acpi_handle handle;
-	acpi_handle address_space_handler_holder;
 	int gpe;
 	int irq;
 	unsigned long command_addr;
Signature · 1 line
2.43.0
author maintainer
#19 lore raw

PATCH 20/20 PCI: Do not wait for disconnected devices when resuming

In reply to Sasha Levin

From: Ilpo Järvinen <[email protected]>

[ Upstream commit 6613443ffc49d03e27f0404978f685c4eac43fba ]

On runtime resume, pci_dev_wait() is called:

pci_pm_runtime_resume()

    pci_pm_bridge_power_up_actions()
      pci_bridge_wait_for_secondary_bus()
        pci_dev_wait()

While a device is runtime suspended along with its PCI hierarchy, the device could get disconnected. In such case, the link will not come up no matter how long pci_dev_wait() waits for it.

Besides the above mentioned case, there could be other ways to get the device disconnected while pci_dev_wait() is waiting for the link to come up.

Make pci_dev_wait() exit if the device is already disconnected to avoid unnecessary delay.

The use cases of pci_dev_wait() boil down to two:

1. Waiting for the device after reset
2. pci_bridge_wait_for_secondary_bus()

The callers in both cases seem to benefit from propagating the disconnection as error even if device disconnection would be more analoguous to the case where there is no device in the first place which return 0 from pci_dev_wait(). In the case 2, it results in unnecessary marking of the devices disconnected again but that is just harmless extra work.

Also make sure compiler does not become too clever with dev->error_state and use READ_ONCE() to force a fetch for the up-to-date value.

---
 drivers/pci/pci.c   | 5 +++++
 include/linux/pci.h | 7 ++++++-
 2 files changed, 11 insertions(+), 1 deletion(-)
drivers/pci/pci.c +5 -0
index 26c9d16cb60c3..bb5a1d8bdfbd8 100644
@@ -1190,6 +1190,11 @@ static int pci_dev_wait(struct pci_dev *dev, char *reset_type, int timeout)
 	for (;;) {
 		u32 id;
 
+		if (pci_dev_is_disconnected(dev)) {
+			pci_dbg(dev, "disconnected; not waiting\n");
+			return -ENOTTY;
+		}
+
 		pci_read_config_dword(dev, PCI_COMMAND, &id);
 		if (!PCI_POSSIBLE_ERROR(id))
 			break;
include/linux/pci.h +6 -1
index ee89a69817aaf..512cb40150dfe 100644
@@ -2484,7 +2484,12 @@ static inline struct pci_dev *pcie_find_root_port(struct pci_dev *dev)
 
 static inline bool pci_dev_is_disconnected(const struct pci_dev *dev)
 {
-	return dev->error_state == pci_channel_io_perm_failure;
+	/*
+	 * error_state is set in pci_dev_set_io_state() using xchg/cmpxchg()
+	 * and read w/o common lock. READ_ONCE() ensures compiler cannot cache
+	 * the value (e.g. inside the loop in pci_dev_wait()).
+	 */
+	return READ_ONCE(dev->error_state) == pci_channel_io_perm_failure;
 }
 
 void pci_request_acs(void);
Signature · 1 line
2.43.0