6.6.33-rc1 review
Subsystems (7)
Greg Kroah-Hartman
maintainerPATCH 737/744 ALSA: timer: Set lower bound of start tick time
In reply to Greg Kroah-Hartman6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Takashi Iwai <[email protected]>
commit 4a63bd179fa8d3fcc44a0d9d71d941ddd62f0c4e upstream.
Currently ALSA timer doesn't have the lower limit of the start tick time, and it allows a very small size, e.g. 1 tick with 1ns resolution for hrtimer. Such a situation may lead to an unexpected RCU stall, where the callback repeatedly queuing the expire update, as reported by fuzzer.
This patch introduces a sanity check of the timer start tick time, so that the system returns an error when a too small start size is set. As of this patch, the lower limit is hard-coded to 100us, which is small enough but can still work somehow.
[ backport note: the error handling is changed, as the original commit
is based on the recent cleanup with guard() in commit beb45974dd49 -- tiwai ]
--- sound/core/timer.c | 10 ++++++++++ 1 file changed, 10 insertions(+)
sound/core/timer.c +10 -0
@@ -553,6 +553,16 @@ static int snd_timer_start1(struct snd_t goto unlock; } +/* check the actual time for the start tick; +* bail out as error if it's way too low (< 100us) +*/ +if (start) { +if ((u64 )snd_timer_hw_resolution (timer) * ticks <100000 ) { + result = -EINVAL ; + goto unlock; + } + } +if (start) timeri->ticks = timeri->cticks = ticks;else if (!timeri->cticks)
Greg Kroah-Hartman
maintainerPATCH 738/744 x86/efistub: Omit physical KASLR when memory reservations exist
In reply to Greg Kroah-Hartman6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ard Biesheuvel <[email protected]>
commit 15aa8fb852f995dd234a57f12dfb989044968bb6 upstream.
The legacy decompressor has elaborate logic to ensure that the randomized physical placement of the decompressed kernel image does not conflict with any memory reservations, including ones specified on the command line using mem=, memmap=, efi_fake_mem= or hugepages=, which are taken into account by the kernel proper at a later stage.
When booting in EFI mode, it is the firmware's job to ensure that the chosen range does not conflict with any memory reservations that it knows about, and this is trivially achieved by using the firmware's memory allocation APIs.
That leaves reservations specified on the command line, though, which the firmware knows nothing about, as these regions have no other special significance to the platform. Since commit
a1b87d54f4e4 ("x86/efistub: Avoid legacy decompressor when doing EFI boot")
these reservations are not taken into account when randomizing the physical placement, which may result in conflicts where the memory cannot be reserved by the kernel proper because its own executable image resides there.
To avoid having to duplicate or reuse the existing complicated logic, disable physical KASLR entirely when such overrides are specified. These are mostly diagnostic tools or niche features, and physical KASLR (as opposed to virtual KASLR, which is much more important as it affects the memory addresses observed by code executing in the kernel) is something we can live without.
--- drivers/firmware/efi/libstub/x86-stub.c | 28 ++++++++++++++++++++++++++-- 1 file changed, 26 insertions(+), 2 deletions(-)
drivers/firmware/efi/libstub/x86-stub.c +26 -2
@@ -776,6 +776,26 @@ static void error(char *str)efi_warn ("Decompression failed: %s\n" , str); } +static const char *cmdline_memmap_override; + +static efi_status_t parse_options (const char *cmdline) +{ +static const char opts[][14 ] = { +"mem=" ,"memmap=" ,"efi_fake_mem=" ,"hugepages=" + }; + +for (int i =0 ; i <ARRAY_SIZE (opts); i++) { +const char *p =strstr (cmdline, opts[i]); + +if (p == cmdline || (p > cmdline &&isspace (p[-1 ]))) { + cmdline_memmap_override = opts[i]; +break ; + } + } + +return efi_parse_options (cmdline); +} +static efi_status_t efi_decompress_kernel (unsigned long *kernel_entry) {unsigned long virt_addr =LOAD_PHYSICAL_ADDR ;
@@ -807,6 +827,10 @@ static efi_status_t efi_decompress_kerne !memcmp(efistub_fw_vendor(), ami, sizeof(ami))) {efi_debug ("AMI firmware v2.0 or older detected - disabling physical KASLR\n" ); seed[0 ] =0 ; + } else if (cmdline_memmap_override) { +efi_info ("%s detected on the kernel command line - disabling physical KASLR\n" , + cmdline_memmap_override); + seed[0 ] =0 ; } }
@@ -881,7 +905,7 @@ void __noreturn efi_stub_entry(efi_handl }#ifdef CONFIG_CMDLINE_BOOL - status =efi_parse_options (CONFIG_CMDLINE ); + status =parse_options (CONFIG_CMDLINE );if (status !=EFI_SUCCESS ) {efi_err ("Failed to parse options\n" ); goto fail;
@@ -890,7 +914,7 @@ void __noreturn efi_stub_entry(efi_handlif (!IS_ENABLED (CONFIG_CMDLINE_OVERRIDE )) {unsigned long cmdline_paddr = ((u64 )hdr->cmd_line_ptr | ((u64 )boot_params->ext_cmd_line_ptr <<32 )); - status =efi_parse_options ((char *)cmdline_paddr); + status =parse_options ((char *)cmdline_paddr);if (status !=EFI_SUCCESS ) {efi_err ("Failed to parse options\n" ); goto fail;
Greg Kroah-Hartman
maintainerPATCH 739/744 efi: libstub: only free priv.runtime_map when allocated
In reply to Greg Kroah-Hartman6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hagar Hemdan <[email protected]>
commit 4b2543f7e1e6b91cfc8dd1696e3cdf01c3ac8974 upstream.
priv.runtime_map is only allocated when efi_novamap is not set. Otherwise, it is an uninitialized value. In the error path, it is freed unconditionally. Avoid passing an uninitialized value to free_pool. Free priv.runtime_map only when it was allocated.
This bug was discovered and resolved using Coverity Static Analysis Security Testing (SAST) by Synopsys, Inc.
--- drivers/firmware/efi/libstub/fdt.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/firmware/efi/libstub/fdt.c +2 -2
@@ -335,8 +335,8 @@ fail_free_new_fdt: fail:efi_free (fdt_size, fdt_addr); - -efi_bs_call (free_pool, priv.runtime_map); +if (!efi_novamap) +efi_bs_call (free_pool, priv.runtime_map);return EFI_LOAD_ERROR ; }
Greg Kroah-Hartman
maintainerPATCH 740/744 x86/pci: Skip early E820 check for ECAM region
In reply to Greg Kroah-Hartman6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Bjorn Helgaas <[email protected]>
commit 199f968f1484a14024d0d467211ffc2faf193eb4 upstream.
Arul, Mateusz, Imcarneiro91, and Aman reported a regression caused by 07eab0901ede ("efi/x86: Remove EfiMemoryMappedIO from E820 map"). On the Lenovo Legion 9i laptop, that commit removes the ECAM area from E820, which means the early E820 validation fails, which means we don't enable ECAM in the "early MCFG" path.
The static MCFG table describes ECAM without depending on the ACPI interpreter. Many Legion 9i ACPI methods rely on that, so they fail when PCI config access isn't available, resulting in the embedded controller, PS/2, audio, trackpad, and battery devices not being detected. The _OSC method also fails, so Linux can't take control of the PCIe hotplug, PME, and AER features:
# pci_mmcfg_early_init()
PCI: ECAM [mem 0xc0000000-0xce0fffff] (base 0xc0000000) for domain 0000 [bus 00-e0]
PCI: not using ECAM ([mem 0xc0000000-0xce0fffff] not reserved)
ACPI Error: AE_ERROR, Returned by Handler for [PCI_Config] (20230628/evregion-300)
ACPI: Interpreter enabled
ACPI: Ignoring error and continuing table load
ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.RP01._SB.PC00], AE_NOT_FOUND (20230628/dswload2-162) ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20230628/psobject-220)
ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0010)
ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.RP01._SB.PC00], AE_NOT_FOUND (20230628/dswload2-162) ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20230628/psobject-220)
...
ACPI Error: Aborting method \_SB.PC00._OSC due to previous error (AE_NOT_FOUND) (20230628/psparse-529) acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_NOT_FOUND)
# pci_mmcfg_late_init()
PCI: ECAM [mem 0xc0000000-0xce0fffff] (base 0xc0000000) for domain 0000 [bus 00-e0]
PCI: [Firmware Info]: ECAM [mem 0xc0000000-0xce0fffff] not reserved in ACPI motherboard resources
PCI: ECAM [mem 0xc0000000-0xce0fffff] is EfiMemoryMappedIO; assuming valid
PCI: ECAM [mem 0xc0000000-0xce0fffff] reserved to work around lack of ACPI motherboard _CRS
Per PCI Firmware r3.3, sec 4.1.2, ECAM space must be reserved by a PNP0C02 resource, but there's no requirement to mention it in E820, so we shouldn't look at E820 to validate the ECAM space described by MCFG.
In 2006, 946f2ee5c731 ("[PATCH] i386/x86-64: Check that MCFG points to an e820 reserved area") added a sanity check of E820 to work around buggy MCFG tables, but that over-aggressive validation causes failures like this one.
Keep the E820 validation check for machines older than 2016, an arbitrary ten years after 946f2ee5c731, so machines that depend on it don't break.
Skip the early E820 check for 2016 and newer BIOSes since there's no requirement to describe ECAM in E820.
--- arch/x86/pci/mmconfig-shared.c | 40 +++++++++++++++++++++++++++++----------- 1 file changed, 29 insertions(+), 11 deletions(-)
arch/x86/pci/mmconfig-shared.c +29 -11
@@ -527,7 +527,34 @@ pci_mmcfg_check_reserved(struct device * {struct resource *conflict; -if (!early && !acpi_disabled) { +if (early) { + +/* +* Don't try to do this check unless configuration type 1 +* is available. How about type 2? +*/ + +/* +* 946f2ee5c731 ("Check that MCFG points to an e820 +* reserved area") added this E820 check in 2006 to work +* around BIOS defects. +* +* Per PCI Firmware r3.3, sec 4.1.2, ECAM space must be +* reserved by a PNP0C02 resource, but it need not be +* mentioned in E820. Before the ACPI interpreter is +* available, we can't check for PNP0C02 resources, so +* there's no reliable way to verify the region in this +* early check. Keep it only for the old machines that +* motivated 946f2ee5c731. +*/ +if (dmi_get_bios_year () <2016 && raw_pci_ops) +return is_mmconf_reserved (e820__mapped_all, cfg, dev, +"E820 entry" ); + +return true; + } + +if (!acpi_disabled) {if (is_mmconf_reserved (is_acpi_reserved, cfg, dev,"ACPI motherboard resource" ))return true;
@@ -563,16 +590,7 @@ pci_mmcfg_check_reserved(struct device ** For MCFG information constructed from hotpluggable host bridge's * _CBA method, just assume it's reserved. */ -if (pci_mmcfg_running_state) -return true; - -/* Don't try to do this check unless configuration -type 1 is available. how about type 2 ?*/ -if (raw_pci_ops) -return is_mmconf_reserved (e820__mapped_all, cfg, dev, -"E820 entry" ); - -return false; +return pci_mmcfg_running_state; }static void __init pci_mmcfg_reject_broken (int early)
Greg Kroah-Hartman
maintainerPATCH 741/744 KVM: x86: Dont advertise guest.MAXPHYADDR as host.MAXPHYADDR in CPUID
In reply to Greg Kroah-Hartman6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Gerd Hoffmann <[email protected]>
commit 6f5c9600621b4efb5c61b482d767432eb1ad3a9c upstream.
Drop KVM's propagation of GuestPhysBits (CPUID leaf 80000008, EAX[23:16]) to HostPhysBits (same leaf, EAX[7:0]) when advertising the address widths to userspace via KVM_GET_SUPPORTED_CPUID.
Per AMD, GuestPhysBits is intended for software use, and physical CPUs do not set that field. I.e. GuestPhysBits will be non-zero if and only if KVM is running as a nested hypervisor, and in that case, GuestPhysBits is NOT guaranteed to capture the CPU's effective MAXPHYADDR when running with TDP enabled.
E.g. KVM will soon use GuestPhysBits to communicate the CPU's maximum *addressable* guest physical address, which would result in KVM under- reporting PhysBits when running as an L1 on a CPU with MAXPHYADDR=52, but without 5-level paging.
--- arch/x86/kvm/cpuid.c | 21 ++++++++++----------- 1 file changed, 10 insertions(+), 11 deletions(-)
arch/x86/kvm/cpuid.c +10 -11
@@ -1212,9 +1212,8 @@ static inline int __do_cpuid_func(struct entry->eax = entry->ebx = entry->ecx =0 ;break ;case 0x80000008 : { -unsigned g_phys_as = (entry->eax >>16 ) &0xff ; -unsigned virt_as =max ((entry->eax >>8 ) &0xff ,48U ); -unsigned phys_as = entry->eax &0xff ; +unsigned int virt_as =max ((entry->eax >>8 ) &0xff ,48U ); +unsigned int phys_as;/* * If TDP (NPT) is disabled use the adjusted host MAXPHYADDR as
@@ -1222,16 +1221,16 @@ static inline int __do_cpuid_func(struct* reductions in MAXPHYADDR for memory encryption affect shadow * paging, too. * -* If TDP is enabled but an explicit guest MAXPHYADDR is not -* provided, use the raw bare metal MAXPHYADDR as reductions to -* the HPAs do not affect GPAs. +* If TDP is enabled, use the raw bare metal MAXPHYADDR as +* reductions to the HPAs do not affect GPAs. */ -if (!tdp_enabled) - g_phys_as = boot_cpu_data.x86_phys_bits; -else if (!g_phys_as) - g_phys_as = phys_as; +if (!tdp_enabled) { + phys_as = boot_cpu_data.x86_phys_bits; + }else { + phys_as = entry->eax &0xff ; + } - entry->eax = g_phys_as | (virt_as <<8 ); + entry->eax = phys_as | (virt_as <<8 ); entry->ecx &= ~(GENMASK (31 ,16 ) |GENMASK (11 ,8 )); entry->edx =0 ;cpuid_entry_override (entry,CPUID_8000_0008_EBX );
Greg Kroah-Hartman
maintainerPATCH 742/744 genirq/cpuhotplug, x86/vector: Prevent vector leak during CPU offline
In reply to Greg Kroah-Hartman6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dongli Zhang <[email protected]>
commit a6c11c0a5235fb144a65e0cb2ffd360ddc1f6c32 upstream.
The absence of IRQD_MOVE_PCNTXT prevents immediate effectiveness of interrupt affinity reconfiguration via procfs. Instead, the change is deferred until the next instance of the interrupt being triggered on the original CPU.
When the interrupt next triggers on the original CPU, the new affinity is enforced within __irq_move_irq(). A vector is allocated from the new CPU, but the old vector on the original CPU remains and is not immediately reclaimed. Instead, apicd->move_in_progress is flagged, and the reclaiming process is delayed until the next trigger of the interrupt on the new CPU.
Upon the subsequent triggering of the interrupt on the new CPU, irq_complete_move() adds a task to the old CPU's vector_cleanup list if it remains online. Subsequently, the timer on the old CPU iterates over its vector_cleanup list, reclaiming old vectors.
However, a rare scenario arises if the old CPU is outgoing before the interrupt triggers again on the new CPU.
In that case irq_force_complete_move() is not invoked on the outgoing CPU to reclaim the old apicd->prev_vector because the interrupt isn't currently affine to the outgoing CPU, and irq_needs_fixup() returns false. Even though __vector_schedule_cleanup() is later called on the new CPU, it doesn't reclaim apicd->prev_vector; instead, it simply resets both apicd->move_in_progress and apicd->prev_vector to 0.
As a result, the vector remains unreclaimed in vector_matrix, leading to a CPU vector leak.
To address this issue, move the invocation of irq_force_complete_move() before the irq_needs_fixup() call to reclaim apicd->prev_vector, if the interrupt is currently or used to be affine to the outgoing CPU.
Additionally, reclaim the vector in __vector_schedule_cleanup() as well, following a warning message, although theoretically it should never see apicd->move_in_progress with apicd->prev_cpu pointing to an offline CPU.
--- arch/x86/kernel/apic/vector.c | 9 ++++++--- kernel/irq/cpuhotplug.c | 16 ++++++++-------- 2 files changed, 14 insertions(+), 11 deletions(-)
arch/x86/kernel/apic/vector.c +6 -3
@@ -1036,7 +1036,8 @@ static void __vector_schedule_cleanup(stadd_timer_on (&cl->timer, cpu); } }else { - apicd->prev_vector =0 ; +pr_warn ("IRQ %u schedule cleanup for offline CPU %u\n" , apicd->irq, cpu); +free_moved_vector (apicd); }raw_spin_unlock (&vector_lock); }
@@ -1073,6 +1074,7 @@ void irq_complete_move(struct irq_cfg *c*/ void irq_force_complete_move (struct irq_desc *desc) { +unsigned int cpu =smp_processor_id ();struct apic_chip_data *apicd;struct irq_data *irqd;unsigned int vector;
@@ -1097,10 +1099,11 @@ void irq_force_complete_move(struct irq_ goto unlock;/* -* If prev_vector is empty, no action required. +* If prev_vector is empty or the descriptor is neither currently +* nor previously on the outgoing CPU no action required. */ vector = apicd->prev_vector; -if (!vector) +if (!vector || (apicd->cpu != cpu && apicd->prev_cpu != cpu)) goto unlock;/*
kernel/irq/cpuhotplug.c +8 -8
@@ -70,6 +70,14 @@ static bool migrate_one_irq(struct irq_d }/* +* Complete an eventually pending irq move cleanup. If this +* interrupt was moved in hard irq context, then the vectors need +* to be cleaned up. It can't wait until this interrupt actually +* happens and this CPU was involved. +*/ +irq_force_complete_move (desc); + +/* * No move required, if: * - Interrupt is per cpu * - Interrupt is not started
@@ -88,14 +96,6 @@ static bool migrate_one_irq(struct irq_d }/* -* Complete an eventually pending irq move cleanup. If this -* interrupt was moved in hard irq context, then the vectors need -* to be cleaned up. It can't wait until this interrupt actually -* happens and this CPU was involved. -*/ -irq_force_complete_move (desc); - -/* * If there is a setaffinity pending, then try to reuse the pending * mask, so the last change of the affinity does not get lost. If * there is no move pending or the pending mask does not contain
Greg Kroah-Hartman
maintainerPATCH 743/744 platform/x86/intel/tpmi: Handle error from tpmi_process_info()
In reply to Greg Kroah-Hartman6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Srinivas Pandruvada <[email protected]>
commit 2920141fc149f71bad22361946417bc43783ed7f upstream.
When tpmi_process_info() returns error, fail to load the driver. This can happen if call to ioremap() returns error.
--- drivers/platform/x86/intel/tpmi.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
drivers/platform/x86/intel/tpmi.c +5 -2
@@ -733,8 +733,11 @@ static int intel_vsec_tpmi_init(struct a* when actual device nodes created outside this * loop via tpmi_create_devices(). */ -if (pfs->pfs_header.tpmi_id ==TPMI_INFO_ID ) -tpmi_process_info (tpmi_info, pfs); +if (pfs->pfs_header.tpmi_id ==TPMI_INFO_ID ) { + ret =tpmi_process_info (tpmi_info, pfs); +if (ret) +return ret; + }if (pfs->pfs_header.tpmi_id ==TPMI_CONTROL_ID )tpmi_set_control_base (auxdev, tpmi_info, pfs);
Greg Kroah-Hartman
maintainerPATCH 744/744 platform/x86/intel-uncore-freq: Dont present root domain on error
In reply to Greg Kroah-Hartman6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Srinivas Pandruvada <[email protected]>
commit db643cb7ebe524d17b4b13583dda03485d4a1bc0 upstream.
If none of the clusters are added because of some error, fail to load driver without presenting root domain. In this case root domain will present invalid data.
--- drivers/platform/x86/intel/uncore-frequency/uncore-frequency-tpmi.c | 7 +++++++ 1 file changed, 7 insertions(+)
drivers/platform/x86/intel/uncore-frequency/uncore-frequency-tpmi.c +7 -0
@@ -234,6 +234,7 @@ static int uncore_probe(struct auxiliary {struct intel_tpmi_plat_info *plat_info;struct tpmi_uncore_struct *tpmi_uncore; +bool uncore_sysfs_added = false;int ret, i, pkg =0 ;int num_resources;
@@ -359,9 +360,15 @@ static int uncore_probe(struct auxiliary }/* Point to next cluster offset */ cluster_offset >>=UNCORE_MAX_CLUSTER_PER_DOMAIN ; + uncore_sysfs_added = true; } } +if (!uncore_sysfs_added) { + ret = -ENODEV ; + goto remove_clusters; + } +auxiliary_set_drvdata (auxdev, tpmi_uncore); tpmi_uncore->root_cluster.root_domain = true;
Quoted 10 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 6.6.33 release. There are 744 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat, 08 Jun 2024 13:15:55 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
Quoted 8 lines
https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.6.33-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-6.6.y
and the diffstat can be found below.thanks,
greg k-h
The Powerpc build failures were noticed on stable-rc 6.9, 6.6 and 6.1. Powerpc:
- maple_defconfig - gcc-13 - failed
arch/powerpc/include/asm/inst.h: In function '__copy_inst_from_kernel_nofault':arch/powerpc/include/asm/uaccess.h:177:19: error: expected string literal before 'DS_FORM_CONSTRAINT'
177 | : DS_FORM_CONSTRAINT (*addr) \
| ^~~~~~~~~~~~~~~~~~Links:
- https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-6.9.y/build/v6.9.2-803-gfcbdac56b0ae/testrun/24217279/suite/build/test/gcc-13-maple_defconfig/log
- https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-6.9.y/build/v6.9.2-803-gfcbdac56b0ae/testrun/24217279/suite/build/test/gcc-13-maple_defconfig/history/
--
Linaro LKFT
https://lkft.linaro.org
Hello,
Quoted 5 lines · On Thu, 6 Jun 2024 15:54:32 +0200 Greg Kroah-Hartman…
This is the start of the stable review cycle for the 6.6.33 release. There are 744 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Quoted 8 lines
Responses should be made by Sat, 08 Jun 2024 13:15:55 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.6.33-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-6.6.y
and the diffstat can be found below.
This rc kernel passes DAMON functionality test[1] on my test machine. Attaching the test results summary below. Please note that I retrieved the kernel from linux-stable-rc tree[2].
[1] https://github.com/awslabs/damon-tests/tree/next/corr
[2] 39dd7d80cd65 ("Linux 6.6.33-rc1")
Thanks,
SJ
[...]
---
ok 1 selftests: damon: debugfs_attrs.sh
ok 2 selftests: damon: debugfs_schemes.sh
ok 3 selftests: damon: debugfs_target_ids.sh
ok 4 selftests: damon: debugfs_empty_targets.sh
ok 5 selftests: damon: debugfs_huge_count_read_write.sh
ok 6 selftests: damon: debugfs_duplicate_context_creation.sh
ok 7 selftests: damon: debugfs_rm_non_contexts.sh
ok 8 selftests: damon: sysfs.sh
ok 9 selftests: damon: sysfs_update_removed_scheme_dir.sh
ok 10 selftests: damon: reclaim.sh
ok 11 selftests: damon: lru_sort.sh
ok 1 selftests: damon-tests: kunit.sh
ok 2 selftests: damon-tests: huge_count_read_write.sh
ok 3 selftests: damon-tests: buffer_overflow.sh
ok 4 selftests: damon-tests: rm_contexts.sh
ok 5 selftests: damon-tests: record_null_deref.sh
ok 6 selftests: damon-tests: dbgfs_target_ids_read_before_terminate_race.sh ok 7 selftests: damon-tests: dbgfs_target_ids_pid_leak.sh
ok 8 selftests: damon-tests: damo_tests.sh
ok 9 selftests: damon-tests: masim-record.sh
ok 10 selftests: damon-tests: build_i386.sh
ok 11 selftests: damon-tests: build_arm64.sh
ok 12 selftests: damon-tests: build_m68k.sh
ok 13 selftests: damon-tests: build_i386_idle_flag.sh
ok 14 selftests: damon-tests: build_i386_highpte.sh
ok 15 selftests: damon-tests: build_nomemcg.sh
[33m
[92mPASS [39m
Quoted 9 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 6.6.33 release. There are 744 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat, 08 Jun 2024 13:15:55 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
Quoted 9 lines
https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.6.33-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-6.6.y
and the diffstat can be found below.thanks,
greg k-h
Compiled and booted on my test system. No dmesg regressions.
thanks,
-- Shuah
Hi,
Quoted 5 lines
This is the start of the stable review cycle for the 6.6.33 release. There are 744 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Quoted 8 lines
Responses should be made by Sat, 08 Jun 2024 13:15:55 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.6.33-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-6.6.y
and the diffstat can be found below.
To build the 6.6.33-rc1 successfully on x86_64, we need the following 2 patches.
8a55c1e2c9e1 perf util: Add a function for replacing characters in a string f6ff1c760431 perf evlist: Add perf_evlist__go_system_wide() helper
Best Regards
Wang Yugui ([email protected])
2024/06/07
Greg Kroah-Hartman
maintainerQuoted 16 lines · Wang Yugui
Hi,
Quoted 5 lines
This is the start of the stable review cycle for the 6.6.33 release. There are 744 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Quoted 8 lines
Responses should be made by Sat, 08 Jun 2024 13:15:55 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.6.33-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-6.6.y
and the diffstat can be found below.
Quoted 4 lines
To build the 6.6.33-rc1 successfully on
x86_64, we need the following 2 patches.
8a55c1e2c9e1perf util: Add a function for replacing characters in a stringf6ff1c760431perf evlist: Addperf_evlist__go_system_wide()helper
Both now queued up, thanks!
greg k-h
Quoted 9 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 6.6.33 release. There are 744 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat, 08 Jun 2024 13:15:55 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
Quoted 8 lines
https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.6.33-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-6.6.y
and the diffstat can be found below.thanks,
greg k-h
All tests passing for Tegra ...
Test results for stable-v6.6:
10 builds: 10 pass, 0 fail
26 boots: 26 pass, 0 fail
116 tests: 116 pass, 0 failLinux version: 6.6.33-rc1-g39dd7d80cd65
Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000,
tegra194-p2972-0000, tegra194-p3509-0000+p3668-0000,
tegra20-ventana, tegra210-p2371-2180,
tegra210-p3450-0000, tegra30-cardhu-a04Jon
Quoted 10 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 6.6.33 release. There are 744 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat, 08 Jun 2024 13:15:55 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
Quoted 8 lines
https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.6.33-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-6.6.y
and the diffstat can be found below.thanks,
greg k-h
Results from Linaro’s test farm.
Build regressions on Powerpc.
## Build
* kernel: 6.6.33-rc1
* git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc
* git branch: linux-6.6.y
* git commit: 39dd7d80cd65769389563028553e9ec89a8f88d1
* git describe: v6.6.32-745-g39dd7d80cd65
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-6.6.y/build/v6.6.32-745-g39dd7d80cd65
## Test Regressions (compared to v6.6.32)
* powerpc, build
- clang-18-cell_defconfig
- clang-18-defconfig
- clang-18-maple_defconfig
- clang-18-ppc64e_defconfig
- clang-nightly-cell_defconfig
- clang-nightly-defconfig
- clang-nightly-maple_defconfig
- gcc-13-cell_defconfig
- gcc-13-defconfig
- gcc-13-maple_defconfig
- gcc-13-ppc64e_defconfig
## Metric Regressions (compared to v6.6.32)
## Test Fixes (compared to v6.6.32)
## Metric Fixes (compared to v6.6.32)
## Test result summary
total: 193993, pass: 148173, fail: 25962, skip: 18882, xfail: 976
## Build Summary
* arc: 5 total, 5 passed, 0 failed
* arm: 129 total, 129 passed, 0 failed
* arm64: 38 total, 38 passed, 0 failed
* i386: 29 total, 29 passed, 0 failed
* mips: 24 total, 24 passed, 0 failed
* parisc: 3 total, 3 passed, 0 failed
* powerpc: 33 total, 22 passed, 11 failed
* riscv: 17 total, 17 passed, 0 failed
* s390: 12 total, 12 passed, 0 failed
* sh: 10 total, 10 passed, 0 failed
* sparc: 6 total, 6 passed, 0 failed
* x86_64: 33 total, 33 passed, 0 failed
## Test suites summary
* boot
* kselftest-android
* kselftest-arm64
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers-dma-buf
* kselftest-efivarfs
* kselftest-exec
* kselftest-filesystems
* kselftest-filesystems-binderfs
* kselftest-filesystems-epoll
* kselftest-firmware
* kselftest-fpu
* kselftest-ftrace
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mm
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-net-forwarding
* kselftest-net-mptcp
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-user_events
* kselftest-vDSO
* kselftest-watchdog
* kselftest-x86
* kselftest-zram
* kunit
* kvm-unit-tests
* libgpiod
* libhugetlbfs
* log-parser-boot
* log-parser-test
* ltp-commands
* ltp-containers
* ltp-controllers
* ltp-cpuhotplug
* ltp-crypto
* ltp-cve
* ltp-dio
* ltp-fcntl-locktests
* ltp-fs
* ltp-fs_bind
* ltp-fs_perms_simple
* ltp-hugetlb
* ltp-ipc
* ltp-math
* ltp-mm
* ltp-nptl
* ltp-pty
* ltp-sched
* ltp-smoke
* ltp-smoketest
* ltp-syscalls
* ltp-tracing
* perf
* rcutorture
--
Linaro LKFT
https://lkft.linaro.org
Hi Greg
Quoted 10 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 6.6.33 release. There are 744 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat, 08 Jun 2024 13:15:55 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
Quoted 9 lines
https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.6.33-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-6.6.y
and the diffstat can be found below.thanks,
greg k-h
6.6.33-rc1 tested.
Build successfully completed.
Boot successfully completed.
No dmesg regressions.
Video output normal.
Sound output normal.
Lenovo ThinkPad X1 Carbon Gen10(Intel i7-1260P(x86_64) arch linux)
[ 0.000000] Linux version 6.6.33-rc1rv
(takeshi@ThinkPadX1Gen10J0764) (gcc (GCC) 14.1.1 20240522, GNU ld (GNU Binutils) 2.42.0) #1 SMP PREEMPT_DYNAMIC Fri Jun 7 20:08:16 JST 2024
Thanks
Quoted 4 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 6.6.33 release. There are 744 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
btw, I requested a backport of a riscv patch to fix some userspace tools, but I didn't see it here.
https://lore.kernel.org/stable/20240530-disparity-deafening-dcbb9e2f1647@spud/
Were you just too busy travelling etc?
Thanks,
Conor.
Greg Kroah-Hartman
maintainerQuoted 6 lines · Conor Dooley
Quoted 4 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 6.6.33 release. There are 744 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Quoted 6 lines
Tested-by Conor Dooley <[email protected]>btw, I requested a backport of a riscv patch to fix some userspace tools, but I didn't see it here.
https://lore.kernel.org/stable/20240530-disparity-deafening-dcbb9e2f1647@spud/
Were you just too busy travelling etc?
Yes, I have been on the road for the past 2 weeks in meetings and training full-time with almost no time to catch up with requests like this. You aren't alone, my backlog is big :(
I'll catch up on it next week as I will be home then.
thanks,
greg k-h
Quoted 14 lines · Greg Kroah-Hartman
Quoted 6 lines · Conor Dooley
Quoted 4 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 6.6.33 release. There are 744 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Quoted 6 lines
Tested-by Conor Dooley <[email protected]>btw, I requested a backport of a riscv patch to fix some userspace tools, but I didn't see it here.
https://lore.kernel.org/stable/20240530-disparity-deafening-dcbb9e2f1647@spud/
Were you just too busy travelling etc?
Quoted 5 lines
Yes, I have been on the road for the past 2 weeks in meetings and training full-time with almost no time to catch up with requests like this. You aren't alone, my backlog is big :(
I'll catch up on it next week as I will be home then.
That's fine, it's been broken for a long time, one release more release isn't gonna kill us :) Safe travels home.
Quoted 4 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 6.6.33 release. There are 744 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Quoted 9 lines
This is the start of the stable review cycle for the 6.6.33 release. There are 744 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat, 08 Jun 2024 13:15:55 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
Quoted 9 lines
https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.6.33-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-6.6.y
and the diffstat can be found below.thanks,
greg k-h
Compiled and booted on my x86_64 and ARM64 test systems. No errors or regressions.
Thanks.
Quoted 9 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 6.6.33 release. There are 744 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat, 08 Jun 2024 13:15:55 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
Quoted 8 lines
https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.6.33-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-6.6.y
and the diffstat can be found below.thanks,
greg k-h
Built and booted successfully on RISC-V RV64 (HiFive Unmatched).