thermal: core: Do not fail cdev registration because of invalid initial state
PATCH v3 1/1 thermal: core: Do not fail cdev registration because of invalid initial state
From: Rafael J. Wysocki <[email protected]>
Subject: [PATCH v3] thermal: core: Do not fail cdev registration because of invalid initial state
It is reported that commit 31a0fa0019b0 ("thermal/debugfs: Pass cooling device state to thermal_debug_cdev_add()") causes the ACPI fan driver to fail probing on some systems which turns out to be due to the _FST control method returning an invalid value until _FSL is first evaluated for the given fan. If this happens, the .get_cur_state() cooling device callback returns an error and __thermal_cooling_device_register() fails as uses that callback after commit 31a0fa0019b0.
Arguably, _FST should not return an invalid value even if it is evaluated before _FSL, so this may be regarded as a platform firmware issue, but at the same time it is not a good enough reason for failing the cooling device registration where the initial cooling device state is only needed to initialize a thermal debug facility.
Accordingly, modify __thermal_cooling_device_register() to avoid calling thermal_debug_cdev_add() instead of returning an error if the initial .get_cur_state() callback invocation fails.
---
v2 -> v3:
* Add a comment to explain the initial state of a cooling device (Daniel). No functional changes.
v1 -> v2:
* Instead of making the thermal debug code effectively ignore the invalid initial cooling device state, simply don't register thermal debugfs for a cooling device if its initial state returned by the driver's .get_cur_state() is invalid (Daniel).
Laura, please test this one even though I don't see why it wouldn't work for you if the v1 did.
--- drivers/thermal/thermal_core.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-)
drivers/thermal/thermal_core.c +11 -2
@@ -999,9 +999,17 @@ __thermal_cooling_device_register(structif (ret) goto out_cdev_type; +/* +* The cooling device's current state is only needed for debug +* initialization below, so a failure to get it does not cause +* the entire cooling device initialization to fail. However, +* the debug will not work for the device if its initial state +* cannot be determined and drivers are responsible for ensuring +* that this will not happen. +*/ ret = cdev->ops->get_cur_state (cdev, ¤t_state);if (ret) - goto out_cdev_type; + current_state =ULONG_MAX ;thermal_cooling_device_setup_sysfs (cdev);
@@ -1016,7 +1024,8 @@ __thermal_cooling_device_register(structreturn ERR_PTR (ret); } -thermal_debug_cdev_add (cdev, current_state); +if (current_state <= cdev->max_state) +thermal_debug_cdev_add (cdev, current_state);/* Add 'this' new cdev to the global cdev list */ mutex_lock (&thermal_list_lock);
Quoted 21 lines · Rafael J. Wysocki
From: Rafael J. Wysocki <[email protected]>
Subject: [PATCH v3] thermal: core: Do not fail cdev registration because of invalid initial stateIt is reported that commit
31a0fa0019b0("thermal/debugfs: Pass cooling device state tothermal_debug_cdev_add()") causes the ACPI fan driver to fail probing on some systems which turns out to be due to the_FSTcontrol method returning an invalid value until_FSLis first evaluated for the given fan. If this happens, the .get_cur_state() cooling device callback returns an error and__thermal_cooling_device_register()fails as uses that callback after commit31a0fa0019b0.Arguably,
_FSTshould not return an invalid value even if it is evaluated before_FSL, so this may be regarded as a platform firmware issue, but at the same time it is not a good enough reason for failing the cooling device registration where the initial cooling device state is only needed to initialize a thermal debug facility.Accordingly, modify
__thermal_cooling_device_register()to avoid callingthermal_debug_cdev_add()instead of returning an error if the initial .get_cur_state() callback invocation fails.
Quoted 5 lines
Fixes 31a0fa0019b0 ("thermal/debugfs: Pass cooling device state to thermal_debug_cdev_add()")Reported-by Laura Nao <[email protected]>Signed-off-by Rafael J. Wysocki <[email protected]>---
Signature · 5 lines
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | <http://twitter.com/#!/linaroorg> Twitter | <http://www.linaro.org/linaro-blog/> Blog
Re: [PATCH v3] thermal: core: Do not fail cdev registration
In reply to Rafael J. WysockiQuoted 26 lines · Rafael J. Wysocki
From: Rafael J. Wysocki <[email protected]>
Subject: [PATCH v3] thermal: core: Do not fail cdev registration because of invalid initial stateIt is reported that commit
31a0fa0019b0("thermal/debugfs: Pass cooling
device state tothermal_debug_cdev_add()") causes the ACPI fan driver to fail probing on some systems which turns out to be due to the_FSTcontrol method returning an invalid value until_FSLis first evaluated
for the given fan. If this happens, the .get_cur_state() cooling device
callback returns an error and__thermal_cooling_device_register()fails
as uses that callback after commit31a0fa0019b0.Arguably,
_FSTshould not return an invalid value even if it is evaluated before_FSL, so this may be regarded as a platform firmware issue, but at the same time it is not a good enough reason for failing the cooling device registration where the initial cooling device state is only needed to initialize a thermal debug facility.Accordingly, modify
__thermal_cooling_device_register()to avoid callingthermal_debug_cdev_add()instead of returning an error if the initial .get_cur_state() callback invocation fails.
Quoted 7 lines
Fixes 31a0fa0019b0 ("thermal/debugfs: Pass cooling device state to
thermal_debug_cdev_add()")
Closes:
https://lore.kernel.org/linux-acpi/[email protected]Reported-by Laura Nao <[email protected]>Signed-off-by Rafael J. Wysocki <[email protected]>---
Thanks,
Laura