dt-bindings: usb: cdns,usb3: use common usb-drd yaml
Frank Li
maintainerPATCH v2 1/1 dt-bindings: usb: cdns,usb3: use common usb-drd yaml
Use common usb-drd yaml for usb OTG related propteries to fix below DTB_CHECK warning.
arch/arm64/boot/dts/freescale/imx8qxp-mek.dtb: usb@5b110000: usb@5b120000: 'port', 'usb-role-switch' do not match any of the regexes: 'pinctrl-[0-9]+'
Add "port" proptery to use connect type C connector and fix below warning. arch/arm64/boot/dts/freescale/imx8qxp-mek.dtb: usb@5b110000: usb@5b120000: Unevaluated properties are not allowed ('port' was unexpected)
---
Notes:
change from v1 to v2
- add dependences
- remove dr-mode : true and usb-role-switch: true
- update commit message
pass dt_binding_check
make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- -j8 dt_binding_check DT_SCHEMA_FILES=cdns,usb3.yaml
SCHEMA Documentation/devicetree/bindings/processed-schema.json
CHKDT Documentation/devicetree/bindings
LINT Documentation/devicetree/bindings
DTEX Documentation/devicetree/bindings/usb/cdns,usb3.example.dts
DTC_CHK Documentation/devicetree/bindings/usb/cdns,usb3.example.dtb
.../devicetree/bindings/usb/cdns,usb3.yaml | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-)
Documentation/devicetree/bindings/usb/cdns,usb3.yaml +12 -3
@@ -42,8 +42,11 @@ properties: - const: otg - const: wakeup - dr_mode: - enum: [host, otg, peripheral] + port: + $ref: /schemas/graph.yaml#/properties/port + description: + This port is used with the 'usb-role-switch' property to connect the + cdns3 to type C connector. maximum-speed: enum: [super-speed, high-speed, full-speed]
@@ -70,6 +73,9 @@ properties: description: Enable resetting of PHY if Rx fail is detected type: boolean +dependencies: + port: [ usb-role-switch ] + required: - compatible - reg
@@ -77,7 +83,10 @@ required: - interrupts - interrupt-names -additionalProperties: false +allOf: + - $ref: usb-drd.yaml# + +unevaluatedProperties: false examples: - |
Signature · 1 line
2.34.1
Quoted 26 lines · Frank Li
Use common usb-drd yaml for usb OTG related propteries to fix below
DTB_CHECKwarning.
arch/arm64/boot/dts/freescale/imx8qxp-mek.dtb: usb@5b110000: usb@5b120000: 'port', 'usb-role-switch' do not match any of the regexes: 'pinctrl-[0-9]+'Add "port" proptery to use connect type C connector and fix below warning.
arch/arm64/boot/dts/freescale/imx8qxp-mek.dtb: usb@5b110000: usb@5b120000: Unevaluated properties are not allowed ('port' was unexpected)Signed-off-by Frank Li <[email protected]>---
Notes:
change from v1 to v2
- add dependences
- remove dr-mode : true and usb-role-switch: true
- update commit messagepass
dt_binding_checkmake ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- -j8
dt_binding_checkDT_SCHEMA_FILES=cdns,usb3.yaml
SCHEMADocumentation/devicetree/bindings/processed-schema.json
CHKDTDocumentation/devicetree/bindings
LINTDocumentation/devicetree/bindings
DTEXDocumentation/devicetree/bindings/usb/cdns,usb3.example.dts
DTC_CHKDocumentation/devicetree/bindings/usb/cdns,usb3.example.dtb
Quoted 3 lines
.../devicetree/bindings/usb/cdns,usb3.yaml | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-)