Skip to contentSkip to conversation

dt-bindings: input: ti,nspire-keypad: convert to YAML format

PATCH Applied Andrew Davis 3 participants 3 messages Jun 12, 2024 – Jul 8, 2024

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 dt-bindings: input: ti,nspire-keypad: convert to YAML format

Convert TI-NSPIRE Keypad controller bindings to DT schema.

---
 .../bindings/input/ti,nspire-keypad.txt       | 60 ---------------
 .../bindings/input/ti,nspire-keypad.yaml      | 74 +++++++++++++++++++
 2 files changed, 74 insertions(+), 60 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/input/ti,nspire-keypad.txt
 create mode 100644 Documentation/devicetree/bindings/input/ti,nspire-keypad.yaml
Documentation/devicetree/bindings/input/ti,nspire-keypad.txt deleted +0 -60
deleted file mode 100644
index 513d94d6e899e..0000000000000
@@ -1,60 +0,0 @@
-TI-NSPIRE Keypad
-
-Required properties:
-- compatible: Compatible property value should be "ti,nspire-keypad".
-
-- reg: Physical base address of the peripheral and length of memory mapped
-  region.
-
-- interrupts: The interrupt number for the peripheral.
-
-- scan-interval: How often to scan in us. Based on a APB speed of 33MHz, the
-	maximum and minimum delay time is ~2000us and ~500us respectively
-
-- row-delay: How long to wait before scanning each row.
-
-- clocks: The clock this peripheral is attached to.
-
-- linux,keymap: The keymap to use
-	(see Documentation/devicetree/bindings/input/matrix-keymap.txt)
-
-Optional properties:
-- active-low: Specify that the keypad is active low (i.e. logical low signifies
-	a key press).
-
-Example:
-
-input {
-	compatible = "ti,nspire-keypad";
-	reg = <0x900E0000 0x1000>;
-	interrupts = <16>;
-
-	scan-interval = <1000>;
-	row-delay = <200>;
-
-	clocks = <&apb_pclk>;
-
-	linux,keymap = <
-	0x0000001c	0x0001001c	0x00040039
-	0x0005002c	0x00060015	0x0007000b
-	0x0008000f	0x0100002d	0x01010011
-	0x0102002f	0x01030004	0x01040016
-	0x01050014	0x0106001f	0x01070002
-	0x010a006a	0x02000013	0x02010010
-	0x02020019	0x02030007	0x02040018
-	0x02050031	0x02060032	0x02070005
-	0x02080028	0x0209006c	0x03000026
-	0x03010025	0x03020024	0x0303000a
-	0x03040017	0x03050023	0x03060022
-	0x03070008	0x03080035	0x03090069
-	0x04000021	0x04010012	0x04020020
-	0x0404002e	0x04050030	0x0406001e
-	0x0407000d	0x04080037	0x04090067
-	0x05010038	0x0502000c	0x0503001b
-	0x05040034	0x0505001a	0x05060006
-	0x05080027	0x0509000e	0x050a006f
-	0x0600002b	0x0602004e	0x06030068
-	0x06040003	0x0605006d	0x06060009
-	0x06070001	0x0609000f	0x0708002a
-	0x0709001d	0x070a0033	>;
-};
Documentation/devicetree/bindings/input/ti,nspire-keypad.yaml new file +74 -0

74 lines not on this page · raw message

Signature · 1 line
2.39.2
Reviewed-by on v1 1/1
#1 lore raw
Quoted 15 lines · Andrew Davis
Documentation/devicetree/bindings/input/ti,nspire-keypad.yaml new file +9 -0
new file mode 100644
index 0000000000000..ed3cfff13addc
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/ti,nspire-keypad.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI-NSPIRE Keypad
+
+maintainers:

Documentation/devicetree/bindings/input/ti,nspire-keypad.yaml line 19

Quoted 10 lines
Documentation/devicetree/bindings/input/ti,nspire-keypad.yaml new file +10 -0
+  - Andrew Davis <[email protected]>
+
+allOf:
+  - $ref: input.yaml#
+  - $ref: matrix-keymap.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ti,nspire-keypad

Since there's unlikely to be another device after all this time, this should probably be a const, but that's a nit in an otherwise okay looking conversion.

Thanks,
Conor.