dt-bindings: phy: rockchip-emmc-phy: Convert to dtschema
Subsystems (3)
PATCH v2 1/1 dt-bindings: phy: rockchip-emmc-phy: Convert to dtschema
Convert txt bindings of Rockchip EMMC PHY to dtschema to allow for validation.
---
Changes in v2:
- Fixed example
- Changed file referenced in grf.yaml
Tested against rockchip/rk3399-firefly.dtb, rockchip/rk3399-orangepi.dtb and rockchip/rk3399-pinebook-pro.dtb.
.../bindings/phy/rockchip,emmc-phy.yaml | 79 +++++++++++++++++++ .../bindings/phy/rockchip-emmc-phy.txt | 43 ---------- .../devicetree/bindings/soc/rockchip/grf.yaml | 2 +- 3 files changed, 80 insertions(+), 44 deletions(-) create mode 100644 Documentation/devicetree/bindings/phy/rockchip,emmc-phy.yaml delete mode 100644 Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt
Documentation/devicetree/bindings/phy/rockchip,emmc-phy.yaml new file +79 -0
@@ -0,0 +1,79 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/rockchip,emmc-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip EMMC PHY + +maintainers: + - Shresth Prasad <[email protected]> + +properties: + "#phy-cells": + const: 0 + + compatible: + const: rockchip,rk3399-emmc-phy + + reg: + description: + PHY register address offset and length in "general register files" + maxItems: 1 + + clock-names: + description: | + Although this is not a required property (because most boards can get + basic functionality without having access to it), it is strongly + suggested. + const: emmcclk + + clocks: + description: + Should have a phandle to the card clock exported by the SDHCI driver. + maxItems: 1 + + drive-impedance-ohm: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Specifies the drive impedance in Ohm. + enum: [33, 40, 50, 66, 100] + default: 50 + + rockchip,enable-strobe-pulldown: + type: boolean + description: | + Enable internal pull-down for the strobe + line. If not set, pull-down is not used. + + rockchip,output-tapdelay-select: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Specifies the phyctrl_otapdlysec register. + default: 0x4 + maximum: 0xf + +required: + - "#phy-cells" + - compatible + - reg + +additionalProperties: false + +examples: + - | + grf: syscon@ff770000 { + compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd"; + reg = <0x0 0xff770000 0x0 0x10000>; + #address-cells = <1>; + #size-cells = <1>; + + emmcphy: phy@f780 { + #phy-cells = <0>; + compatible = "rockchip,rk3399-emmc-phy"; + reg = <0xf780 0x20>; + clocks = <&sdhci>; + clock-names = "emmcclk"; + drive-impedance-ohm = <50>; + }; + };
Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt deleted +0 -43
43 lines not on this page · raw message
Documentation/devicetree/bindings/soc/rockchip/grf.yaml +1 -1
@@ -178,7 +178,7 @@ allOf: patternProperties: "phy@[0-9a-f]+$": description: - Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt + Documentation/devicetree/bindings/phy/rockchip,emmc-phy.yaml - if: properties:
Signature · 1 line
2.45.2
Rob Herring (Arm)
maintainerQuoted 12 lines · Shresth Prasad
Convert txt bindings of Rockchip EMMC PHY to dtschema to allow for validation.
Signed-off-by Shresth Prasad <[email protected]>---
Changes in v2:
- Fixed example
- Changed file referenced ingrf.yamlTested against
rockchip/rk3399-firefly.dtb,rockchip/rk3399-orangepi.dtbandrockchip/rk3399-pinebook-pro.dtb.
Quoted 7 lines
.../bindings/phy/rockchip,emmc-phy.yaml | 79 +++++++++++++++++++ .../bindings/phy/rockchip-emmc-phy.txt | 43 ---------- .../devicetree/bindings/soc/rockchip/grf.yaml | 2 +- 3 files changed, 80 insertions(+), 44 deletions(-) create mode 100644 Documentation/devicetree/bindings/phy/rockchip,emmc-phy.yaml delete mode 100644 Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt
My bot found errors running 'make dt_binding_check' on your patch:
yamllint warnings/errors:
dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/phy/rockchip,emmc-phy.example.dtb: syscon@ff770000: reg: [[0, 4285988864], [0, 65536]] is too long
from schema $id: http://devicetree.org/schemas/soc/rockchip/grf.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/phy/rockchip,emmc-phy.example.dtb: syscon@ff770000: reg: [[0, 4285988864], [0, 65536]] is too long
from schema $id: http://devicetree.org/schemas/mfd/syscon.yaml#
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/[email protected]
The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.