vfs: move d_lockref out of the area used by RCU lookup
PATCH 1/1 vfs: move d_lockref out of the area used by RCU lookup
Stock kernel scales worse than FreeBSD when doing a 20-way stat(2) on the same tmpfs-backed file.
According to perf top:
38.09% [kernel] [k] lockref_put_return 26.08% [kernel] [k] lockref_get_not_dead 25.60% [kernel] [k] __d_lookup_rcu 0.89% [kernel] [k] clear_bhb_loop
__d_lookup_rcu is participating in cacheline ping pong due to the embedded name sharing a cacheline with lockref.
Moving it out resolves the problem:
41.50% [kernel] [k] lockref_put_return 41.03% [kernel] [k] lockref_get_not_dead 1.54% [kernel] [k] clear_bhb_loop
benchmark (will-it-scale, Sapphire Rapids, tmpfs, ops/s):
FreeBSD:7219334
before: 5038006
after: 7842883 (+55%)
One minor remark: the 'after' result is unstable, fluctuating between ~7.8 mln and ~9 mln between restarts of the test. I picked the lower bound.
An important remark: lockref API has a deficiency where if the spinlock is taken for any reason and there is a continuous stream of incs/decs, it will never recover back to atomic op -- everyone will be stuck taking the lock. I used to run into it on occasion when spawning 'perf top' while benchmarking, but now that the pressure on lockref itself is increased I randomly see it merely when benchmarking.
It looks like this:
min:308703 max:429561 total:8217844 <-- nice start
min:152207 max:178380 total:3501879 <-- things are degrading
min:65563 max:70106 total:1349677 <-- everyone is stuck locking
min:69001 max:72873 total:1424714
min:68993 max:73084 total:1425902
The fix would be to add a variant which will wait for the lock to be released for some number of spins, and only take it after to still guarantee forward progress. I'm going to look into it. Mentioned in the commit message if someone runs into it as is.
--- include/linux/dcache.h | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
include/linux/dcache.h +6 -1
@@ -89,13 +89,18 @@ struct dentry {struct inode *d_inode;/* Where the name belongs to - NULL is * negative */ unsigned char d_iname[DNAME_INLINE_LEN ];/* small names */ +/* --- cacheline 1 boundary (64 bytes) was 32 bytes ago --- */ /* Ref lookup also touches following */ -struct lockref d_lockref;/* per-dentry lock and refcount */ const struct dentry_operations *d_op;struct super_block *d_sb;/* The root of the dentry tree */ unsigned long d_time;/* used by d_revalidate */ void *d_fsdata;/* fs-specific data */ +/* --- cacheline 2 boundary (128 bytes) --- */ +struct lockref d_lockref;/* per-dentry lock and refcount +* keep separate from RCU lookup area if +* possible! +*/ union {struct list_head d_lru;/* LRU list */
Signature · 1 line
2.43.0
While I 100% stand behind the patch I found the lockref issue mentioned below reproduces almost reliably on my box if given enough time, thus I'm going to need to fix it first.
As such consider this patch posting as a heads up, don't pull it.
Quoted 78 lines · Mateusz Guzik
Stock kernel scales worse than FreeBSD when doing a 20-way stat(2) on the same tmpfs-backed file.
According to perf top:
38.09% [kernel] [k] lockref_put_return 26.08% [kernel] [k] lockref_get_not_dead 25.60% [kernel] [k] __d_lookup_rcu 0.89% [kernel] [k] clear_bhb_loop
__d_lookup_rcuis participating in cacheline ping pong due to the embedded name sharing a cacheline with lockref.Moving it out resolves the problem:
41.50% [kernel] [k] lockref_put_return 41.03% [kernel] [k] lockref_get_not_dead 1.54% [kernel] [k] clear_bhb_loopbenchmark (will-it-scale, Sapphire Rapids, tmpfs, ops/s):
FreeBSD:7219334before: 5038006 after: 7842883 (+55%)One minor remark: the 'after' result is unstable, fluctuating between ~7.8 mln and ~9 mln between restarts of the test. I picked the lower bound.
An important remark: lockref API has a deficiency where if the spinlock is taken for any reason and there is a continuous stream of incs/decs, it will never recover back to atomic op -- everyone will be stuck taking the lock. I used to run into it on occasion when spawning 'perf top' while benchmarking, but now that the pressure on lockref itself is increased I randomly see it merely when benchmarking.
It looks like this:
min:308703 max:429561 total:8217844 <-- nice start min:152207 max:178380 total:3501879 <-- things are degrading min:65563 max:70106 total:1349677 <-- everyone is stuck lockingmin:69001 max:72873 total:1424714
min:68993 max:73084 total:1425902The fix would be to add a variant which will wait for the lock to be released for some number of spins, and only take it after to still guarantee forward progress. I'm going to look into it. Mentioned in the commit message if someone runs into it as is.
Signed-off-by Mateusz Guzik <[email protected]>--- include/linux/dcache.h | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)include/linux/dcache.h +6
-2@@ -89,13 +89,18 @@ struct dentry {struct inode *d_inode;/* Where the name belongs to - NULL is * negative */ unsigned char d_iname[DNAME_INLINE_LEN ];/* small names */ +/* --- cacheline 1 boundary (64 bytes) was 32 bytes ago --- */ /* Ref lookup also touches following */ -struct lockref d_lockref;/* per-dentry lock and refcount */ const struct dentry_operations *d_op;struct super_block *d_sb;/* The root of the dentry tree */ unsigned long d_time;/* used by d_revalidate */ void *d_fsdata;/* fs-specific data */ +/* --- cacheline 2 boundary (128 bytes) --- */ +struct lockref d_lockref;/* per-dentry lock and refcount +* keep separate from RCU lookup area if +* possible! +*/ union {struct list_head d_lru;/* LRU list */ --2.43.0
Signature · 1 line
Mateusz Guzik <mjguzik gmail.com>