ipmi: ssif_bmc: add support of skipping ARM SBMR boot progress response
Subsystems (2)
cover ipmi: ssif_bmc: add support of skipping ARM SBMR boot progress response
Adding support of skipping ARM SBMR boot progress response, to avoid SSIF state machine problem if host chosse not read back the response.
Potin Lai (2):
bindings: ipmi: Add property for skipping SBMR boot progress response
ipmi: ssif_bmc: support skipping ARM SBMR bootprogress response
.../devicetree/bindings/ipmi/ssif-bmc.yaml | 5 ++++ drivers/char/ipmi/ssif_bmc.c | 25 +++++++++++++++++++ 2 files changed, 30 insertions(+)
Signature · 1 line
2.31.1
PATCH 1/2 bindings: ipmi: Add property for skipping SBMR boot progress response
In ARM Server Base Manageability Requirements (SBMR) document, Callers can choose to not read back Response Data after sending the command "Send Boot Progress Code".
Define "arm-sbmr,skip-bootprogress-response" property for skipping the response of "Send Boot Progress Code" from userspace.
--- Documentation/devicetree/bindings/ipmi/ssif-bmc.yaml | 5 +++++ 1 file changed, 5 insertions(+)
Documentation/devicetree/bindings/ipmi/ssif-bmc.yaml +5 -0
@@ -19,6 +19,11 @@ properties: reg: maxItems: 1 + arm-sbmr,skip-bootprogress-response: + type: boolean + description: + Skipping ARM SBMR “Send Boot Progress Code” response. + required: - compatible - reg
Signature · 1 line
2.31.1
Rob Herring
maintainerRe: [PATCH 1/2] bindings: ipmi: Add property for skipping SBMR boot progress response
Quoted 3 lines · Potin Lai
In ARM Server Base Manageability Requirements (SBMR) document, Callers can choose to not read back Response Data after sending the command "Send Boot Progress Code".
Got a link to that document?
Quoted 2 lines
Define "arm-sbmr,skip-bootprogress-response" property for skipping the response of "Send Boot Progress Code" from userspace.
I don't understand why this would be conditional? How can you define in the BMC what the host behavior is? Doesn't the host side decide that? So don't you always have to support no response?
Quoted 11 lines
Signed-off-by Potin Lai <[email protected]>--- Documentation/devicetree/bindings/ipmi/ssif-bmc.yaml | 5 +++++ 1 file changed, 5 insertions(+)Documentation/devicetree/bindings/ipmi/ssif-bmc.yaml +0
-0
Documentation/devicetree/bindings/ipmi/ssif-bmc.yaml properties: · line 22
Quoted 4 lines
Documentation/devicetree/bindings/ipmi/ssif-bmc.yaml +1
-0@@ -19,6 +19,11 @@ properties: reg: maxItems: 1 + arm-sbmr,skip-bootprogress-response:
Form is vendor,property-name where vendor is defined in vendor-prefixes.yaml. 'arm-sbmr' is not a vendor.
Quoted 10 lines
Documentation/devicetree/bindings/ipmi/ssif-bmc.yaml +4
-0+ type: boolean + description: + Skipping ARM SBMR “Send Boot Progress Code” response. + required: - compatible - regSignature · 1 line
2.31.1
Corey Minyard
maintainerRe: [PATCH 1/2] bindings: ipmi: Add property for skipping SBMR boot progress response
Quoted 5 lines · Rob Herring
Quoted 3 lines · Potin Lai
In ARM Server Base Manageability Requirements (SBMR) document, Callers can choose to not read back Response Data after sending the command "Send Boot Progress Code".
Quoted 8 lines
Got a link to that document?
Quoted 2 lines
Define "arm-sbmr,skip-bootprogress-response" property for skipping the response of "Send Boot Progress Code" from userspace.
I don't understand why this would be conditional? How can you define in the BMC what the host behavior is? Doesn't the host side decide that? So don't you always have to support no response?
Yeah, this doesn't make any sense for two reasons:
What if the host wanted to read back the response? You make no provision for that, as I believe Rob said above.
The BMC should be able to start a new transaction without the previous response being read. So this should be pointless. If that's not happening, it's a bug and should be fixed. Otherwise an untimely reset could hang the SSIF interface.
-corey
Quoted 30 lines
Quoted 12 lines
Signed-off-by Potin Lai <[email protected]>--- Documentation/devicetree/bindings/ipmi/ssif-bmc.yaml | 5 +++++ 1 file changed, 5 insertions(+)Documentation/devicetree/bindings/ipmi/ssif-bmc.yaml +0
-0Documentation/devicetree/bindings/ipmi/ssif-bmc.yaml properties: · line 22
Quoted 4 lines
Documentation/devicetree/bindings/ipmi/ssif-bmc.yaml +1
-0@@ -19,6 +19,11 @@ properties: reg: maxItems: 1 + arm-sbmr,skip-bootprogress-response:Form is vendor,property-name where vendor is defined in
vendor-prefixes.yaml. 'arm-sbmr' is not a vendor.Quoted 10 lines
Documentation/devicetree/bindings/ipmi/ssif-bmc.yaml +4
-0+ type: boolean + description: + Skipping ARM SBMR “Send Boot Progress Code” response. + required: - compatible - regSignature · 1 line
2.31.1
PATCH 2/2 ipmi: ssif_bmc: support skipping ARM SBMR bootprogress response
In reply to Potin LaiIn ARM SBMR document, the host can chosse to not read back the response of “Send Boot Progress Code” command.
To avoid SSIF being in a wrong state due to host not read back the response, add the implementation of "arm-sbmr,skip-bootprogress-response" property for skipping the response of "Send Boot Progress Code" command from userspace.
--- drivers/char/ipmi/ssif_bmc.c | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+)
drivers/char/ipmi/ssif_bmc.c +25 -0
@@ -39,6 +39,11 @@#define SSIF_IPMI_MULTIPART_READ_START 0x3#define SSIF_IPMI_MULTIPART_READ_MIDDLE 0x9 +#define GET_NETFN (netfn_lun) ((netfn_lun >> 2) & 0xfe) +#define IPMI_GROUP_EXT_NETFN 0x2C +#define IPMI_SBMR_GROUP 0xAE +#define IPMI_SBMR_BOOTPROGRESS_CMD 0x02 +/* * IPMI 2.0 Spec, section 12.7 SSIF Timing, * Request-to-Response Time is T6max(250ms) - T1max(20ms) - 3ms = 227ms
@@ -102,6 +107,8 @@ struct ssif_bmc_ctx {struct ssif_part_buffer part_buf;struct ipmi_ssif_msg response;struct ipmi_ssif_msg request; +/* Flag to skip response of Send Boot Progress Code */ +bool skip_bootprogress_resp; };static inline struct ssif_bmc_ctx *to_ssif_bmc (struct file *file)
@@ -187,6 +194,20 @@ static ssize_t ssif_bmc_write(struct file *file, const char __user *buf, size_treturn -EINVAL ;spin_lock_irqsave (&ssif_bmc->lock, flags); +if (ssif_bmc->skip_bootprogress_resp && +GET_NETFN (msg.payload[0 ]) ==IPMI_GROUP_EXT_NETFN && + msg.payload[1 ] ==IPMI_SBMR_BOOTPROGRESS_CMD && + msg.payload[3 ] ==IPMI_SBMR_GROUP ) { +if (ssif_bmc->response_timer_inited) { +del_timer (&ssif_bmc->response_timer); + ssif_bmc->response_timer_inited = false; + } + ssif_bmc->busy = false; +memset (&ssif_bmc->request,0 ,sizeof (struct ipmi_ssif_msg )); +spin_unlock_irqrestore (&ssif_bmc->lock, flags); +return count; + } +while (ssif_bmc->response_in_progress) {spin_unlock_irqrestore (&ssif_bmc->lock, flags);if (file->f_flags &O_NONBLOCK )
@@ -806,6 +827,10 @@ static int ssif_bmc_probe(struct i2c_client *client)if (!ssif_bmc)return -ENOMEM ; +if (of_property_read_bool (client->dev.of_node, +"arm-sbmr,skip-bootprogress-response" )) + ssif_bmc->skip_bootprogress_resp = true; +spin_lock_init (&ssif_bmc->lock);init_waitqueue_head (&ssif_bmc->wait_queue);
Signature · 1 line
2.31.1
Re: [PATCH 2/2] ipmi: ssif_bmc: support skipping ARM SBMR bootprogress response
Quoted 3 lines · Potin Lai
In ARM SBMR document, the host can chosse to not read back the response of “Send Boot Progress Code” command.
Thanks for proposing a solution for the case.
As per my understanding from the ARM SBMR document, the "host can choose not to read back the response of the "Send Boot Progress Code" command" is from the implementation note (U) in Section F.1.1, which is to provide guidance on the implementation, not a rule. This item also clarifies some consequences if the host decides not to read back the response.
There is also an information statement (I) in this section that recommends reading back the response after sending "Send Boot Progress Code." I found this statement suitable for SSIF, which was designed as single-threaded from the beginning.
I'm not totally sure about this understanding yet so please let me know if any.
Thank you,
- Quan
Quoted 67 lines
To avoid SSIF being in a wrong state due to host not read back the response, add the implementation of "arm-sbmr,skip-bootprogress-response" property for skipping the response of "Send Boot Progress Code" command from userspace.
Signed-off-by Potin Lai <[email protected]>--- drivers/char/ipmi/ssif_bmc.c | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+)drivers/char/ipmi/ssif_bmc.c +25
-0@@ -39,6 +39,11 @@#define SSIF_IPMI_MULTIPART_READ_START 0x3#define SSIF_IPMI_MULTIPART_READ_MIDDLE 0x9 +#define GET_NETFN (netfn_lun) ((netfn_lun >> 2) & 0xfe) +#define IPMI_GROUP_EXT_NETFN 0x2C +#define IPMI_SBMR_GROUP 0xAE +#define IPMI_SBMR_BOOTPROGRESS_CMD 0x02 +/* * IPMI 2.0 Spec, section 12.7 SSIF Timing, * Request-to-Response Time is T6max(250ms) - T1max(20ms) - 3ms = 227ms @@ -102,6 +107,8 @@ struct ssif_bmc_ctx {struct ssif_part_buffer part_buf;struct ipmi_ssif_msg response;struct ipmi_ssif_msg request; +/* Flag to skip response of Send Boot Progress Code */ +bool skip_bootprogress_resp; };static inline struct ssif_bmc_ctx *to_ssif_bmc (struct file *file)@@ -187,6 +194,20 @@ static ssize_t ssif_bmc_write(struct file *file, const char __user *buf, size_treturn -EINVAL ;spin_lock_irqsave (&ssif_bmc->lock, flags); +if (ssif_bmc->skip_bootprogress_resp && +GET_NETFN (msg.payload[0 ]) ==IPMI_GROUP_EXT_NETFN && + msg.payload[1 ] ==IPMI_SBMR_BOOTPROGRESS_CMD && + msg.payload[3 ] ==IPMI_SBMR_GROUP ) { +if (ssif_bmc->response_timer_inited) { +del_timer (&ssif_bmc->response_timer); + ssif_bmc->response_timer_inited = false; + } + ssif_bmc->busy = false; +memset (&ssif_bmc->request,0 ,sizeof (struct ipmi_ssif_msg )); +spin_unlock_irqrestore (&ssif_bmc->lock, flags); +return count; + } +while (ssif_bmc->response_in_progress) {spin_unlock_irqrestore (&ssif_bmc->lock, flags);if (file->f_flags &O_NONBLOCK )@@ -806,6 +827,10 @@ static int ssif_bmc_probe(struct i2c_client *client)if (!ssif_bmc)return -ENOMEM ; +if (of_property_read_bool (client->dev.of_node, +"arm-sbmr,skip-bootprogress-response" )) + ssif_bmc->skip_bootprogress_resp = true; +spin_lock_init (&ssif_bmc->lock);init_waitqueue_head (&ssif_bmc->wait_queue);