selftests: net: Switch pmtu.sh to use the internal ovs script.
Subsystems (4)
Aaron Conole
maintainercover selftests: net: Switch pmtu.sh to use the internal ovs script.
Currently, if a user wants to run pmtu.sh and cover all the provided test cases, they need to install the Open vSwitch userspace utilities. This dependency is difficult for users as well as CI environments, because the userspace build and setup may require lots of support and devel packages to be installed, system setup to be correct, and things like permissions and selinux policies to be properly configured.
The kernel selftest suite includes an ovs-dpctl.py utility which can interact with the openvswitch module directly. This lets developers and CI environments run without needing too many extra dependencies - just the pyroute2 python package.
This series enhances the ovs-dpctl utility to provide support for set() and tunnel() flow specifiers, better ipv6 handling support, and the ability to add tunnel vports, and LWT interfaces. Finally, it modifies the pmtu.sh script to call the ovs-dpctl.py utility rather than the typical OVS userspace utilities.
NOTE: This could also be applied as-is. I'm trying to get the vng test
working in my environment, so I submitted as RFC because I didn't get to test with the config change in 7/7.
Aaron Conole (6):
selftests: openvswitch: Support explicit tunnel port creation.
selftests: openvswitch: Refactor actions parsing.
selftests: openvswitch: Add set() and set_masked() support.
selftests: openvswitch: Add support for tunnel() key.
selftests: openvswitch: Support implicit ipv6 arguments.
selftests: net: Use the provided dpctl rather than the vswitchd for
tests.
selftests: net: add config for openvswitch
.../selftests/net/openvswitch/ovs-dpctl.py | 370 +++++++++++++++--- tools/testing/selftests/net/config | 5 ++++ tools/testing/selftests/net/pmtu.sh | 87 +++- 3 files changed, 394 insertions(+), 68 deletions(-)
Signature · 1 line
2.45.1
Aaron Conole
maintainerRFC 1/7 selftests: openvswitch: Support explicit tunnel port creation.
The OVS module can operate in conjunction with various types of tunnel ports. These are created as either explicit tunnel vport types, OR by creating a tunnel interface which acts as an anchor for the lightweight tunnel support.
This patch adds the ability to add tunnel ports to an OVS datapath for testing various scenarios with tunnel ports. With this addition, the vswitch "plumbing" will at least be able to push packets around using the tunnel vports. Future patches will add support for setting required tunnel metadata for lwts in the datapath. The end goal will be to push packets via these tunnels, and will be used in an upcoming commit for testing the path MTU.
--- .../selftests/net/openvswitch/ovs-dpctl.py | 81 +++++++++++++++++-- 1 file changed, 75 insertions(+), 6 deletions(-)
tools/testing/selftests/net/openvswitch/ovs-dpctl.py +75 -6
@@ -10,6 +10,7 @@ import ipaddress import logging import multiprocessing import re +import socket import struct import sys import time
@@ -29,6 +30,7 @@ try: from pyroute2.netlink.exceptions import NetlinkError from pyroute2.netlink.generic import GenericNetlinkSocket import pyroute2 + import pyroute2.iproute except ModuleNotFoundError: print("Need to install the python pyroute2 package >= 0.6.")
@@ -1617,7 +1619,7 @@ class OvsVport(GenericNetlinkSocket): ("OVS_VPORT_ATTR_PORT_NO", "uint32"), ("OVS_VPORT_ATTR_TYPE", "uint32"), ("OVS_VPORT_ATTR_NAME", "asciiz"), - ("OVS_VPORT_ATTR_OPTIONS", "none"), + ("OVS_VPORT_ATTR_OPTIONS", "vportopts"), ("OVS_VPORT_ATTR_UPCALL_PID", "array(uint32)"), ("OVS_VPORT_ATTR_STATS", "vportstats"), ("OVS_VPORT_ATTR_PAD", "none"),
@@ -1625,6 +1627,13 @@ class OvsVport(GenericNetlinkSocket): ("OVS_VPORT_ATTR_NETNSID", "uint32"), ) + class vportopts(nla): + nla_map = ( + ("OVS_TUNNEL_ATTR_UNSPEC", "none"), + ("OVS_TUNNEL_ATTR_DST_PORT", "uint16"), + ("OVS_TUNNEL_ATTR_EXTENSION", "none"), + ) + class vportstats(nla): fields = ( ("rx_packets", "=Q"),
@@ -1693,7 +1702,7 @@ class OvsVport(GenericNetlinkSocket): raise ne return reply - def attach(self, dpindex, vport_ifname, ptype): + def attach(self, dpindex, vport_ifname, ptype, dport, lwt): msg = OvsVport.ovs_vport_msg() msg["cmd"] = OVS_VPORT_CMD_NEW
@@ -1702,12 +1711,43 @@ class OvsVport(GenericNetlinkSocket): msg["dpifindex"] = dpindex port_type = OvsVport.str_to_type(ptype) - msg["attrs"].append(["OVS_VPORT_ATTR_TYPE", port_type]) msg["attrs"].append(["OVS_VPORT_ATTR_NAME", vport_ifname]) msg["attrs"].append( ["OVS_VPORT_ATTR_UPCALL_PID", [self.upcall_packet.epid]] ) + TUNNEL_DEFAULTS = [("geneve", 6081), + ("vxlan", 4798)] + + for tnl in TUNNEL_DEFAULTS: + if ptype == tnl[0]: + if not dport: + dport = tnl[1] + + if not lwt: + vportopt = OvsVport.ovs_vport_msg.vportopts() + vportopt["attrs"].append( + ["OVS_TUNNEL_ATTR_DST_PORT", socket.htons(dport)] + ) + msg["attrs"].append( + ["OVS_VPORT_ATTR_OPTIONS", vportopt] + ) + else: + port_type = OvsVport.OVS_VPORT_TYPE_NETDEV + ipr = pyroute2.iproute.IPRoute() + + if tnl[0] == "geneve": + ipr.link("add", ifname=vport_ifname, kind=tnl[0], + geneve_port=dport, + geneve_collect_metadata=True, + geneve_udp_zero_csum6_rx=1) + elif tnl[0] == "vxlan": + ipr.link("add", ifname=vport_ifname, kind=tnl[0], + vxlan_learning=0, vxlan_collect_metadata=1, + vxlan_udp_zero_csum6_rx=1, vxlan_port=dport) + break + msg["attrs"].append(["OVS_VPORT_ATTR_TYPE", port_type]) + try: reply = self.nlm_request( msg, msg_type=self.prid, msg_flags=NLM_F_REQUEST | NLM_F_ACK
@@ -2053,12 +2093,19 @@ def print_ovsdp_full(dp_lookup_rep, ifindex, ndb=NDB(), vpl=OvsVport()): for iface in ndb.interfaces: rep = vpl.info(iface.ifname, ifindex) if rep is not None: + opts = "" + vpo = rep.get_attr("OVS_VPORT_ATTR_OPTIONS") + if vpo: + dpo = vpo.get_attr("OVS_TUNNEL_ATTR_DST_PORT") + if dpo: + opts += " tnl-dport:%s" % socket.ntohs(dpo) print( - " port %d: %s (%s)" + " port %d: %s (%s%s)" % ( rep.get_attr("OVS_VPORT_ATTR_PORT_NO"), rep.get_attr("OVS_VPORT_ATTR_NAME"), OvsVport.type_to_str(rep.get_attr("OVS_VPORT_ATTR_TYPE")), + opts, ) )
@@ -2120,12 +2167,30 @@ def main(argv): "--ptype", type=str, default="netdev", - choices=["netdev", "internal"], + choices=["netdev", "internal", "geneve", "vxlan"], help="Interface type (default netdev)", ) + addifcmd.add_argument( + "-p", + "--dport", + type=int, + default=0, + help="Destination port (0 for default)" + ) + addifcmd.add_argument( + "-l", + "--lwt", + type=bool, + default=True, + help="Use LWT infrastructure instead of vport (default true)." + ) delifcmd = subparsers.add_parser("del-if") delifcmd.add_argument("dpname", help="Datapath Name") delifcmd.add_argument("delif", help="Interface name for adding") + delifcmd.add_argument("-d", + "--dellink", + type=bool, default=False, + help="Delete the link as well.") dumpflcmd = subparsers.add_parser("dump-flows") dumpflcmd.add_argument("dumpdp", help="Datapath Name")
@@ -2186,7 +2251,8 @@ def main(argv): print("DP '%s' not found." % args.dpname) return 1 dpindex = rep["dpifindex"] - rep = ovsvp.attach(rep["dpifindex"], args.addif, args.ptype) + rep = ovsvp.attach(rep["dpifindex"], args.addif, args.ptype, + args.dport, args.lwt) msg = "vport '%s'" % args.addif if rep and rep["header"]["error"] is None: msg += " added."
@@ -2207,6 +2273,9 @@ def main(argv): msg += " removed." else: msg += " failed to remove." + if args.dellink: + ipr = pyroute2.iproute.IPRoute() + ipr.link("del", index=ipr.link_lookup(ifname=args.delif)[0]) elif hasattr(args, "dumpdp"): rep = ovsdp.info(args.dumpdp, 0) if rep is None:
Signature · 1 line
2.45.1
Re: [ovs-dev] [RFC net-next 1/7] selftests: openvswitch: Support explicit tunnel port creation.
Quoted 15 lines · Aaron Conole
The OVS module can operate in conjunction with various types of tunnel ports. These are created as either explicit tunnel vport types, OR by creating a tunnel interface which acts as an anchor for the lightweight tunnel support.
This patch adds the ability to add tunnel ports to an OVS datapath for testing various scenarios with tunnel ports. With this addition, the vswitch "plumbing" will at least be able to push packets around using the tunnel vports. Future patches will add support for setting required tunnel metadata for lwts in the datapath. The end goal will be to push packets via these tunnels, and will be used in an upcoming commit for testing the path MTU.
Signed-off-by Aaron Conole <[email protected]>
...
tools/testing/selftests/net/openvswitch/ovs-dpctl.py class OvsVport(GenericNetlinkSocket): · line 1720
Quoted 12 lines
tools/testing/selftests/net/openvswitch/ovs-dpctl.py +2
-1@@ -1702,12 +1711,43 @@ class OvsVport(GenericNetlinkSocket): msg["dpifindex"] = dpindex port_type = OvsVport.str_to_type(ptype) - msg["attrs"].append(["OVS_VPORT_ATTR_TYPE", port_type]) msg["attrs"].append(["OVS_VPORT_ATTR_NAME", vport_ifname]) msg["attrs"].append( ["OVS_VPORT_ATTR_UPCALL_PID", [self.upcall_packet.epid]] ) + TUNNEL_DEFAULTS = [("geneve", 6081), + ("vxlan", 4798)]
Hi Aaron,
It is corrected as part of another patch in this series, but the correct port for vxlan is 4789 (i.e. 89 rather than 98).
With that fixed, feel free to add:
..
Aaron Conole
maintainerRe: [ovs-dev] [RFC net-next 1/7] selftests: openvswitch: Support explicit tunnel port creation.
Quoted 34 lines · Simon Horman
Quoted 15 lines · Aaron Conole
The OVS module can operate in conjunction with various types of tunnel ports. These are created as either explicit tunnel vport types, OR by creating a tunnel interface which acts as an anchor for the lightweight tunnel support.
This patch adds the ability to add tunnel ports to an OVS datapath for testing various scenarios with tunnel ports. With this addition, the vswitch "plumbing" will at least be able to push packets around using the tunnel vports. Future patches will add support for setting required tunnel metadata for lwts in the datapath. The end goal will be to push packets via these tunnels, and will be used in an upcoming commit for testing the path MTU.
Signed-off-by Aaron Conole <[email protected]>...
tools/testing/selftests/net/openvswitch/ovs-dpctl.py class OvsVport(GenericNetlinkSocket): · line 1720
Quoted 12 lines
tools/testing/selftests/net/openvswitch/ovs-dpctl.py +2
-1@@ -1702,12 +1711,43 @@ class OvsVport(GenericNetlinkSocket): msg["dpifindex"] = dpindex port_type = OvsVport.str_to_type(ptype) - msg["attrs"].append(["OVS_VPORT_ATTR_TYPE", port_type]) msg["attrs"].append(["OVS_VPORT_ATTR_NAME", vport_ifname]) msg["attrs"].append( ["OVS_VPORT_ATTR_UPCALL_PID", [self.upcall_packet.epid]] ) + TUNNEL_DEFAULTS = [("geneve", 6081), + ("vxlan", 4798)]Hi Aaron,
Quoted 4 lines
It is corrected as part of another patch in this series, but the correct port for vxlan is 4789 (i.e. 89 rather than 98).
With that fixed, feel free to add:
Thanks Simon! Done.
Quoted 4 lines
Reviewed-by Simon Horman <[email protected]>Tested-by Simon Horman <[email protected]>..
Aaron Conole
maintainerRFC 2/7 selftests: openvswitch: Refactor actions parsing.
In reply to Aaron ConoleUntil recently, the ovs-dpctl utility was used with a limited actions set and didn't need to have support for multiple similar actions. However, when adding support for tunnels, it will be important to support multiple set() actions in a single flow. When printing these actions, the existing code will be unable to print all of the sets - it will only print the first.
Refactor this code to be easier to read and support multiple actions of the same type in an action list.
--- .../selftests/net/openvswitch/ovs-dpctl.py | 45 ++++++++++--------- 1 file changed, 23 insertions(+), 22 deletions(-)
tools/testing/selftests/net/openvswitch/ovs-dpctl.py +23 -22
@@ -439,32 +439,30 @@ class ovsactions(nla): def dpstr(self, more=False): print_str = "" - for field in self.nla_map: + for field in self["attrs"]: if field[1] == "none" or self.get_attr(field[0]) is None: continue if print_str != "": print_str += "," - if field[1] == "uint32": - if field[0] == "OVS_ACTION_ATTR_OUTPUT": - print_str += "%d" % int(self.get_attr(field[0])) - elif field[0] == "OVS_ACTION_ATTR_RECIRC": - print_str += "recirc(0x%x)" % int(self.get_attr(field[0])) - elif field[0] == "OVS_ACTION_ATTR_TRUNC": - print_str += "trunc(%d)" % int(self.get_attr(field[0])) - elif field[0] == "OVS_ACTION_ATTR_DROP": - print_str += "drop(%d)" % int(self.get_attr(field[0])) - elif field[1] == "flag": - if field[0] == "OVS_ACTION_ATTR_CT_CLEAR": - print_str += "ct_clear" - elif field[0] == "OVS_ACTION_ATTR_POP_VLAN": - print_str += "pop_vlan" - elif field[0] == "OVS_ACTION_ATTR_POP_ETH": - print_str += "pop_eth" - elif field[0] == "OVS_ACTION_ATTR_POP_NSH": - print_str += "pop_nsh" - elif field[0] == "OVS_ACTION_ATTR_POP_MPLS": - print_str += "pop_mpls" + if field[0] == "OVS_ACTION_ATTR_OUTPUT": + print_str += "%d" % int(self.get_attr(field[0])) + elif field[0] == "OVS_ACTION_ATTR_RECIRC": + print_str += "recirc(0x%x)" % int(self.get_attr(field[0])) + elif field[0] == "OVS_ACTION_ATTR_TRUNC": + print_str += "trunc(%d)" % int(self.get_attr(field[0])) + elif field[0] == "OVS_ACTION_ATTR_DROP": + print_str += "drop(%d)" % int(self.get_attr(field[0])) + elif field[0] == "OVS_ACTION_ATTR_CT_CLEAR": + print_str += "ct_clear" + elif field[0] == "OVS_ACTION_ATTR_POP_VLAN": + print_str += "pop_vlan" + elif field[0] == "OVS_ACTION_ATTR_POP_ETH": + print_str += "pop_eth" + elif field[0] == "OVS_ACTION_ATTR_POP_NSH": + print_str += "pop_nsh" + elif field[0] == "OVS_ACTION_ATTR_POP_MPLS": + print_str += "pop_mpls" else: datum = self.get_attr(field[0]) if field[0] == "OVS_ACTION_ATTR_CLONE":
@@ -472,7 +470,10 @@ class ovsactions(nla): print_str += datum.dpstr(more) print_str += ")" else: - print_str += datum.dpstr(more) + try: + print_str += datum.dpstr(more) + except: + print_str += "{ATTR: %s not decoded}" % field[0] return print_str
Signature · 1 line
2.45.1
Re: [ovs-dev] [RFC net-next 2/7] selftests: openvswitch: Refactor actions parsing.
Quoted 11 lines · Aaron Conole
Until recently, the ovs-dpctl utility was used with a limited actions set and didn't need to have support for multiple similar actions. However, when adding support for tunnels, it will be important to support multiple
set()actions in a single flow. When printing these actions, the existing code will be unable to print all of the sets - it will only print the first.Refactor this code to be easier to read and support multiple actions of the same type in an action list.
Signed-off-by Aaron Conole <[email protected]>
Aaron Conole
maintainerRFC 3/7 selftests: openvswitch: Add set() and set_masked() support.
In reply to Aaron ConoleThese will be used in upcoming commits to set specific attributes for interacting with tunnels. Since set() will use the key parsing routine, we also make sure to prepend it with an open paren, for the action parsing to properly understand it.
--- .../selftests/net/openvswitch/ovs-dpctl.py | 39 +++++++++++++++++-- 1 file changed, 35 insertions(+), 4 deletions(-)
tools/testing/selftests/net/openvswitch/ovs-dpctl.py +35 -4
@@ -284,7 +284,7 @@ class ovsactions(nla): ("OVS_ACTION_ATTR_UNSPEC", "none"), ("OVS_ACTION_ATTR_OUTPUT", "uint32"), ("OVS_ACTION_ATTR_USERSPACE", "userspace"), - ("OVS_ACTION_ATTR_SET", "none"), + ("OVS_ACTION_ATTR_SET", "ovskey"), ("OVS_ACTION_ATTR_PUSH_VLAN", "none"), ("OVS_ACTION_ATTR_POP_VLAN", "flag"), ("OVS_ACTION_ATTR_SAMPLE", "none"),
@@ -292,7 +292,7 @@ class ovsactions(nla): ("OVS_ACTION_ATTR_HASH", "none"), ("OVS_ACTION_ATTR_PUSH_MPLS", "none"), ("OVS_ACTION_ATTR_POP_MPLS", "flag"), - ("OVS_ACTION_ATTR_SET_MASKED", "none"), + ("OVS_ACTION_ATTR_SET_MASKED", "ovskey"), ("OVS_ACTION_ATTR_CT", "ctact"), ("OVS_ACTION_ATTR_TRUNC", "uint32"), ("OVS_ACTION_ATTR_PUSH_ETH", "none"),
@@ -469,6 +469,14 @@ class ovsactions(nla): print_str += "clone(" print_str += datum.dpstr(more) print_str += ")" + elif field[0] == "OVS_ACTION_ATTR_SET" or \ + field[0] == "OVS_ACTION_ATTR_SET_MASKED": + print_str += "set" + if field[0] == "OVS_ACTION_ATTR_SET_MASKED": + print_str += "_masked" + print_str += "(" + print_str += datum.dpstr(more) + print_str += ")" else: try: print_str += datum.dpstr(more)
@@ -547,6 +555,25 @@ class ovsactions(nla): self["attrs"].append(("OVS_ACTION_ATTR_CLONE", subacts)) actstr = actstr[parsedLen:] parsed = True + elif parse_starts_block(actstr, "set(", False): + parencount += 1 + k = ovskey() + actstr = actstr[len("set("):] + actstr = k.parse(actstr, None) + self["attrs"].append(("OVS_ACTION_ATTR_SET", k)) + if not actstr.startswith(")"): + actstr = ")" + actstr + parsed = True + elif parse_starts_block(actstr, "set_masked(", False): + parencount += 1 + k = ovskey() + m = ovskey() + actstr = actstr[len("set_masked("):] + actstr = k.parse(actstr, m) + self["attrs"].append(("OVS_ACTION_ATTR_SET_MASKED", [k, m])) + if not actstr.startswith(")"): + actstr = ")" + actstr + parsed = True elif parse_starts_block(actstr, "ct(", False): parencount += 1 actstr = actstr[len("ct(") :]
@@ -1312,7 +1339,7 @@ class ovskey(nla): mask["attrs"].append([field[0], m]) self["attrs"].append([field[0], k]) - flowstr = flowstr[strspn(flowstr, "),") :] + flowstr = flowstr[strspn(flowstr, "), ") :] return flowstr
@@ -1898,7 +1925,11 @@ class OvsFlow(GenericNetlinkSocket): ): print_str += "drop" else: - print_str += actsmsg.dpstr(more) + if type(actsmsg) == "list": + for act in actsmsg: + print_str += act.dpstr(more) + else: + print_str += actsmsg.dpstr(more) return print_str
Signature · 1 line
2.45.1
Re: [ovs-dev] [RFC net-next 3/7] selftests: openvswitch: Add set() and set_masked() support.
Quoted 6 lines · Aaron Conole
These will be used in upcoming commits to set specific attributes for interacting with tunnels. Since
set()will use the key parsing routine, we also make sure to prepend it with an open paren, for the action parsing to properly understand it.Signed-off-by Aaron Conole <[email protected]>
Re: [RFC net-next 3/7] selftests: openvswitch: Add set() and set_masked() support.
In reply to Aaron ConoleQuoted 83 lines · Aaron Conole
These will be used in upcoming commits to set specific attributes for interacting with tunnels. Since
set()will use the key parsing routine, we also make sure to prepend it with an open paren, for the action parsing to properly understand it.Signed-off-by Aaron Conole <[email protected]>--- .../selftests/net/openvswitch/ovs-dpctl.py | 39 +++++++++++++++++-- 1 file changed, 35 insertions(+), 4 deletions(-)tools/testing/selftests/net/openvswitch/ovs-dpctl.py +30
-3@@ -284,7 +284,7 @@ class ovsactions(nla): ("OVS_ACTION_ATTR_UNSPEC", "none"), ("OVS_ACTION_ATTR_OUTPUT", "uint32"), ("OVS_ACTION_ATTR_USERSPACE", "userspace"), - ("OVS_ACTION_ATTR_SET", "none"), + ("OVS_ACTION_ATTR_SET", "ovskey"), ("OVS_ACTION_ATTR_PUSH_VLAN", "none"), ("OVS_ACTION_ATTR_POP_VLAN", "flag"), ("OVS_ACTION_ATTR_SAMPLE", "none"),@@ -292,7 +292,7 @@ class ovsactions(nla): ("OVS_ACTION_ATTR_HASH", "none"), ("OVS_ACTION_ATTR_PUSH_MPLS", "none"), ("OVS_ACTION_ATTR_POP_MPLS", "flag"), - ("OVS_ACTION_ATTR_SET_MASKED", "none"), + ("OVS_ACTION_ATTR_SET_MASKED", "ovskey"), ("OVS_ACTION_ATTR_CT", "ctact"), ("OVS_ACTION_ATTR_TRUNC", "uint32"), ("OVS_ACTION_ATTR_PUSH_ETH", "none"),@@ -469,6 +469,14 @@ class ovsactions(nla): print_str += "clone(" print_str += datum.dpstr(more) print_str += ")" + elif field[0] == "OVS_ACTION_ATTR_SET" or \ + field[0] == "OVS_ACTION_ATTR_SET_MASKED": + print_str += "set" + if field[0] == "OVS_ACTION_ATTR_SET_MASKED": + print_str += "_masked" + print_str += "(" + print_str += datum.dpstr(more) + print_str += ")" else: try: print_str += datum.dpstr(more)@@ -547,6 +555,25 @@ class ovsactions(nla): self["attrs"].append(("OVS_ACTION_ATTR_CLONE", subacts)) actstr = actstr[parsedLen:] parsed = True + elif parse_starts_block(actstr, "set(", False): + parencount += 1 + k = ovskey() + actstr = actstr[len("set("):] + actstr = k.parse(actstr, None) + self["attrs"].append(("OVS_ACTION_ATTR_SET", k)) + if not actstr.startswith(")"): + actstr = ")" + actstr + parsed = True + elif parse_starts_block(actstr, "set_masked(", False): + parencount += 1 + k = ovskey() + m = ovskey() + actstr = actstr[len("set_masked("):] + actstr = k.parse(actstr, m) + self["attrs"].append(("OVS_ACTION_ATTR_SET_MASKED", [k, m])) + if not actstr.startswith(")"): + actstr = ")" + actstr + parsed = True elif parse_starts_block(actstr, "ct(", False): parencount += 1 actstr = actstr[len("ct(") :]@@ -1312,7 +1339,7 @@ class ovskey(nla): mask["attrs"].append([field[0], m]) self["attrs"].append([field[0], k]) - flowstr = flowstr[strspn(flowstr, "),") :] + flowstr = flowstr[strspn(flowstr, "), ") :] return flowstr
tools/testing/selftests/net/openvswitch/ovs-dpctl.py class OvsFlow(GenericNetlinkSocket): · line 1928
Quoted 5 lines
tools/testing/selftests/net/openvswitch/ovs-dpctl.py +1
-1@@ -1898,7 +1925,11 @@ class OvsFlow(GenericNetlinkSocket): ): print_str += "drop" else: - print_str += actsmsg.dpstr(more) + if type(actsmsg) == "list":
nit: I belive the recommended way of comparing types is using "isinstance":
https://www.flake8rules.com/rules/E721.html
Also, I don't see what can make actmsg be a list. It should always be an instance of "ovsactions", right?
Quoted 10 lines
tools/testing/selftests/net/openvswitch/ovs-dpctl.py +4
-1+ for act in actsmsg: + print_str += act.dpstr(more) + else: + print_str += actsmsg.dpstr(more) return print_str --2.45.1
Aaron Conole
maintainerRe: [RFC net-next 3/7] selftests: openvswitch: Add set() and set_masked() support.
Quoted 93 lines · Adrián Moreno
Quoted 83 lines · Aaron Conole
These will be used in upcoming commits to set specific attributes for interacting with tunnels. Since
set()will use the key parsing routine, we also make sure to prepend it with an open paren, for the action parsing to properly understand it.Signed-off-by Aaron Conole <[email protected]>--- .../selftests/net/openvswitch/ovs-dpctl.py | 39 +++++++++++++++++-- 1 file changed, 35 insertions(+), 4 deletions(-)tools/testing/selftests/net/openvswitch/ovs-dpctl.py +30
-3@@ -284,7 +284,7 @@ class ovsactions(nla): ("OVS_ACTION_ATTR_UNSPEC", "none"), ("OVS_ACTION_ATTR_OUTPUT", "uint32"), ("OVS_ACTION_ATTR_USERSPACE", "userspace"), - ("OVS_ACTION_ATTR_SET", "none"), + ("OVS_ACTION_ATTR_SET", "ovskey"), ("OVS_ACTION_ATTR_PUSH_VLAN", "none"), ("OVS_ACTION_ATTR_POP_VLAN", "flag"), ("OVS_ACTION_ATTR_SAMPLE", "none"),@@ -292,7 +292,7 @@ class ovsactions(nla): ("OVS_ACTION_ATTR_HASH", "none"), ("OVS_ACTION_ATTR_PUSH_MPLS", "none"), ("OVS_ACTION_ATTR_POP_MPLS", "flag"), - ("OVS_ACTION_ATTR_SET_MASKED", "none"), + ("OVS_ACTION_ATTR_SET_MASKED", "ovskey"), ("OVS_ACTION_ATTR_CT", "ctact"), ("OVS_ACTION_ATTR_TRUNC", "uint32"), ("OVS_ACTION_ATTR_PUSH_ETH", "none"),@@ -469,6 +469,14 @@ class ovsactions(nla): print_str += "clone(" print_str += datum.dpstr(more) print_str += ")" + elif field[0] == "OVS_ACTION_ATTR_SET" or \ + field[0] == "OVS_ACTION_ATTR_SET_MASKED": + print_str += "set" + if field[0] == "OVS_ACTION_ATTR_SET_MASKED": + print_str += "_masked" + print_str += "(" + print_str += datum.dpstr(more) + print_str += ")" else: try: print_str += datum.dpstr(more)@@ -547,6 +555,25 @@ class ovsactions(nla): self["attrs"].append(("OVS_ACTION_ATTR_CLONE", subacts)) actstr = actstr[parsedLen:] parsed = True + elif parse_starts_block(actstr, "set(", False): + parencount += 1 + k = ovskey() + actstr = actstr[len("set("):] + actstr = k.parse(actstr, None) + self["attrs"].append(("OVS_ACTION_ATTR_SET", k)) + if not actstr.startswith(")"): + actstr = ")" + actstr + parsed = True + elif parse_starts_block(actstr, "set_masked(", False): + parencount += 1 + k = ovskey() + m = ovskey() + actstr = actstr[len("set_masked("):] + actstr = k.parse(actstr, m) + self["attrs"].append(("OVS_ACTION_ATTR_SET_MASKED", [k, m])) + if not actstr.startswith(")"): + actstr = ")" + actstr + parsed = True elif parse_starts_block(actstr, "ct(", False): parencount += 1 actstr = actstr[len("ct(") :]@@ -1312,7 +1339,7 @@ class ovskey(nla): mask["attrs"].append([field[0], m]) self["attrs"].append([field[0], k]) - flowstr = flowstr[strspn(flowstr, "),") :] + flowstr = flowstr[strspn(flowstr, "), ") :] return flowstrtools/testing/selftests/net/openvswitch/ovs-dpctl.py class OvsFlow(GenericNetlinkSocket): · line 1928
Quoted 5 lines
tools/testing/selftests/net/openvswitch/ovs-dpctl.py +1
-1@@ -1898,7 +1925,11 @@ class OvsFlow(GenericNetlinkSocket): ): print_str += "drop" else: - print_str += actsmsg.dpstr(more) + if type(actsmsg) == "list":nit: I belive the recommended way of comparing types is using "isinstance":
Quoted 4 lines
https://www.flake8rules.com/rules/E721.html
Also, I don't see what can make actmsg be a list. It should always be an instance of "ovsactions", right?
Yes, you're right. This was some debug code that I was messing with and it made it into this submission. I've dropped it :) Thanks for the review!
Quoted 11 lines
Quoted 11 lines
tools/testing/selftests/net/openvswitch/ovs-dpctl.py +4
-1+ for act in actsmsg: + print_str += act.dpstr(more) + else: + print_str += actsmsg.dpstr(more) return print_str --2.45.1
Aaron Conole
maintainerRFC 4/7 selftests: openvswitch: Add support for tunnel() key.
In reply to Aaron ConoleThis will be used when setting details about the tunnel to use as transport. There is a difference between the ODP format between tunnel():
the 'key' flag is not actually a flag field, so we don't support it in the same way that the vswitchd userspace supports displaying it.
--- .../selftests/net/openvswitch/ovs-dpctl.py | 164 +++++++++++++++++- 1 file changed, 162 insertions(+), 2 deletions(-)
tools/testing/selftests/net/openvswitch/ovs-dpctl.py +162 -2
@@ -705,7 +705,7 @@ class ovskey(nla): ("OVS_KEY_ATTR_ARP", "ovs_key_arp"), ("OVS_KEY_ATTR_ND", "ovs_key_nd"), ("OVS_KEY_ATTR_SKB_MARK", "uint32"), - ("OVS_KEY_ATTR_TUNNEL", "none"), + ("OVS_KEY_ATTR_TUNNEL", "ovs_key_tunnel"), ("OVS_KEY_ATTR_SCTP", "ovs_key_sctp"), ("OVS_KEY_ATTR_TCP_FLAGS", "be16"), ("OVS_KEY_ATTR_DP_HASH", "uint32"),
@@ -1265,6 +1265,165 @@ class ovskey(nla): init=init, ) + class ovs_key_tunnel(nla): + nla_flags = NLA_F_NESTED + + nla_map = ( + ("OVS_TUNNEL_KEY_ATTR_ID", "be64"), + ("OVS_TUNNEL_KEY_ATTR_IPV4_SRC", "ipaddr"), + ("OVS_TUNNEL_KEY_ATTR_IPV4_DST", "ipaddr"), + ("OVS_TUNNEL_KEY_ATTR_TOS", "uint8"), + ("OVS_TUNNEL_KEY_ATTR_TTL", "uint8"), + ("OVS_TUNNEL_KEY_ATTR_DONT_FRAGMENT", "flag"), + ("OVS_TUNNEL_KEY_ATTR_CSUM", "flag"), + ("OVS_TUNNEL_KEY_ATTR_OAM", "flag"), + ("OVS_TUNNEL_KEY_ATTR_GENEVE_OPTS", "array(uint32)"), + ("OVS_TUNNEL_KEY_ATTR_TP_SRC", "be16"), + ("OVS_TUNNEL_KEY_ATTR_TP_DST", "be16"), + ("OVS_TUNNEL_KEY_ATTR_VXLAN_OPTS", "none"), + ("OVS_TUNNEL_KEY_ATTR_IPV6_SRC", "ipaddr"), + ("OVS_TUNNEL_KEY_ATTR_IPV6_DST", "ipaddr"), + ("OVS_TUNNEL_KEY_ATTR_PAD", "none"), + ("OVS_TUNNEL_KEY_ATTR_ERSPAN_OPTS", "none"), + ("OVS_TUNNEL_KEY_ATTR_IPV4_INFO_BRIDGE", "flag"), + ) + + def parse(self, flowstr, mask=None): + if not flowstr.startswith("tunnel("): + return None, None + + k = ovskey.ovs_key_tunnel() + if mask is not None: + mask = ovskey.ovs_key_tunnel() + + flowstr = flowstr[len("tunnel("):] + + v6_address = None + + fields = [ + ("tun_id=", r"(\d+)", int, "OVS_TUNNEL_KEY_ATTR_ID", + 0xffffffffffffffff, None, None), + + ("src=", r"([0-9a-fA-F\.]+)", str, + "OVS_TUNNEL_KEY_ATTR_IPV4_SRC", "255.255.255.255", "0.0.0.0", + False), + ("dst=", r"([0-9a-fA-F\.]+)", str, + "OVS_TUNNEL_KEY_ATTR_IPV4_DST", "255.255.255.255", "0.0.0.0", + False), + + ("ipv6_src=", r"([0-9a-fA-F:]+)", str, + "OVS_TUNNEL_KEY_ATTR_IPV6_SRC", + "ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff", "::", True), + ("ipv6_dst=", r"([0-9a-fA-F:]+)", str, + "OVS_TUNNEL_KEY_ATTR_IPV6_DST", + "ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff", "::", True), + + ("tos=", r"(\d+)", int, "OVS_TUNNEL_KEY_ATTR_TOS", 255, 0, + None), + ("ttl=", r"(\d+)", int, "OVS_TUNNEL_KEY_ATTR_TTL", 255, 0, + None), + + ("tp_src=", r"(\d+)", int, "OVS_TUNNEL_KEY_ATTR_TP_SRC", + 65535, 0, None), + ("tp_dst=", r"(\d+)", int, "OVS_TUNNEL_KEY_ATTR_TP_DST", + 65535, 0, None), + ] + + forced_include = ["OVS_TUNNEL_KEY_ATTR_TTL"] + + for prefix, regex, typ, attr_name, mask_val, default_val, v46_flag in fields: + flowstr, value = parse_extract_field(flowstr, prefix, regex, typ, False) + if not attr_name: + raise Exception("Bad list value in tunnel fields") + + if value is None and attr_name in forced_include: + value = default_val + mask_val = default_val + + if value is not None: + if v6_address is None and v46_flag is not None: + v6_address = v46_flag + if v6_address is not None and v46_flag is not None \ + and v46_flag != v6_address: + raise ValueError("Cannot mix v6 and v4 addresses") + k["attrs"].append([attr_name, value]) + if mask is not None: + mask["attrs"].append([attr_name, mask_val]) + else: + if v6_address is not None and v46_flag is not None \ + and v46_flag != v6_address: + continue + if v6_address is None and v46_flag is not None: + continue + if mask is not None: + mask["attrs"].append([attr_name, default_val]) + + if k["attrs"][0][0] != "OVS_TUNNEL_KEY_ATTR_ID": + raise ValueError("Needs a tunid set") + + if flowstr.startswith("flags("): + flowstr = flowstr[len("flags("):] + flagspos = flowstr.find(")") + flags = flowstr[:flagspos] + flowstr = flowstr[flagspos + 1:] + + flag_attrs = { + "df": "OVS_TUNNEL_KEY_ATTR_DONT_FRAGMENT", + "csum": "OVS_TUNNEL_KEY_ATTR_CSUM", + "oam": "OVS_TUNNEL_KEY_ATTR_OAM" + } + + for flag in flags.split("|"): + if flag in flag_attrs: + k["attrs"].append([flag_attrs[flag], True]) + if mask is not None: + mask["attrs"].append([flag_attrs[flag], True]) + + flowstr = flowstr[strspn(flowstr, ", ") :] + return flowstr, k, mask + + def dpstr(self, mask=None, more=False): + printstr = "tunnel(" + + flagsattrs = [] + for k in self["attrs"]: + noprint = False + if k[0] == "OVS_TUNNEL_KEY_ATTR_ID": + print_str += "tun_id=%d" % k[1] + elif k[0] == "OVS_TUNNEL_KEY_ATTR_IPV4_SRC": + print_str += "src=%s" % k[1] + elif k[0] == "OVS_TUNNEL_KEY_ATTR_IPV4_DST": + print_str += "dst=%s" % k[1] + elif k[0] == "OVS_TUNNEL_KEY_ATTR_IPV6_SRC": + print_str += "ipv6_src=%s" % k[1] + elif k[0] == "OVS_TUNNEL_KEY_ATTR_IPV6_DST": + print_str += "ipv6_dst=%s" % k[1] + elif k[0] == "OVS_TUNNEL_KEY_ATTR_TOS": + print_str += "tos=%d" % k[1] + elif k[0] == "OVS_TUNNEL_KEY_ATTR_TTL": + print_str += "ttl=%d" % k[1] + elif k[0] == "OVS_TUNNEL_KEY_ATTR_TP_SRC": + print_str += "tp_src=%d" % k[1] + elif k[0] == "OVS_TUNNEL_KEY_ATTR_TP_DST": + print_str += "tp_dst=%d" % k[1] + elif k[0] == "OVS_TUNNEL_KEY_ATTR_DONT_FRAGMENT": + noprint = True + flagsattrs.append("df") + elif k[0] == "OVS_TUNNEL_KEY_ATTR_CSUM": + noprint = True + flagsattrs.append("csum") + elif k[0] == "OVS_TUNNEL_KEY_ATTR_OAM": + noprint = True + flagsattrs.append("oam") + + if not noprint: + print_str += "," + + if len(flagsattrs): + printstr += "flags(" + "|".join(flagsattrs) + ")" + printstr += ")" + return printstr + class ovs_key_mpls(nla): fields = (("lse", ">I"),)
@@ -1273,6 +1432,7 @@ class ovskey(nla): ("OVS_KEY_ATTR_PRIORITY", "skb_priority", intparse), ("OVS_KEY_ATTR_SKB_MARK", "skb_mark", intparse), ("OVS_KEY_ATTR_RECIRC_ID", "recirc_id", intparse), + ("OVS_KEY_ATTR_TUNNEL", "tunnel", ovskey.ovs_key_tunnel), ("OVS_KEY_ATTR_DP_HASH", "dp_hash", intparse), ("OVS_KEY_ATTR_CT_STATE", "ct_state", parse_ct_state), ("OVS_KEY_ATTR_CT_ZONE", "ct_zone", intparse),
@@ -1745,7 +1905,7 @@ class OvsVport(GenericNetlinkSocket): ) TUNNEL_DEFAULTS = [("geneve", 6081), - ("vxlan", 4798)] + ("vxlan", 4789)] for tnl in TUNNEL_DEFAULTS: if ptype == tnl[0]:
Signature · 1 line
2.45.1
Simon Horman
reviewerRe: [ovs-dev] [RFC net-next 4/7] selftests: openvswitch: Add support for tunnel() key.
Quoted 6 lines · Aaron Conole
This will be used when setting details about the tunnel to use as transport. There is a difference between the ODP format between
tunnel():
the 'key' flag is not actually a flag field, so we don't support it in the same way that the vswitchd userspace supports displaying it.Signed-off-by Aaron Conole <[email protected]>
...
Quoted 72 lines
tools/testing/selftests/net/openvswitch/ovs-dpctl.py +68
-0@@ -1265,6 +1265,165 @@ class ovskey(nla): init=init, ) + class ovs_key_tunnel(nla): + nla_flags = NLA_F_NESTED + + nla_map = ( + ("OVS_TUNNEL_KEY_ATTR_ID", "be64"), + ("OVS_TUNNEL_KEY_ATTR_IPV4_SRC", "ipaddr"), + ("OVS_TUNNEL_KEY_ATTR_IPV4_DST", "ipaddr"), + ("OVS_TUNNEL_KEY_ATTR_TOS", "uint8"), + ("OVS_TUNNEL_KEY_ATTR_TTL", "uint8"), + ("OVS_TUNNEL_KEY_ATTR_DONT_FRAGMENT", "flag"), + ("OVS_TUNNEL_KEY_ATTR_CSUM", "flag"), + ("OVS_TUNNEL_KEY_ATTR_OAM", "flag"), + ("OVS_TUNNEL_KEY_ATTR_GENEVE_OPTS", "array(uint32)"), + ("OVS_TUNNEL_KEY_ATTR_TP_SRC", "be16"), + ("OVS_TUNNEL_KEY_ATTR_TP_DST", "be16"), + ("OVS_TUNNEL_KEY_ATTR_VXLAN_OPTS", "none"), + ("OVS_TUNNEL_KEY_ATTR_IPV6_SRC", "ipaddr"), + ("OVS_TUNNEL_KEY_ATTR_IPV6_DST", "ipaddr"), + ("OVS_TUNNEL_KEY_ATTR_PAD", "none"), + ("OVS_TUNNEL_KEY_ATTR_ERSPAN_OPTS", "none"), + ("OVS_TUNNEL_KEY_ATTR_IPV4_INFO_BRIDGE", "flag"), + ) + + def parse(self, flowstr, mask=None): + if not flowstr.startswith("tunnel("): + return None, None + + k = ovskey.ovs_key_tunnel() + if mask is not None: + mask = ovskey.ovs_key_tunnel() + + flowstr = flowstr[len("tunnel("):] + + v6_address = None + + fields = [ + ("tun_id=", r"(\d+)", int, "OVS_TUNNEL_KEY_ATTR_ID", + 0xffffffffffffffff, None, None), + + ("src=", r"([0-9a-fA-F\.]+)", str, + "OVS_TUNNEL_KEY_ATTR_IPV4_SRC", "255.255.255.255", "0.0.0.0", + False), + ("dst=", r"([0-9a-fA-F\.]+)", str, + "OVS_TUNNEL_KEY_ATTR_IPV4_DST", "255.255.255.255", "0.0.0.0", + False), + + ("ipv6_src=", r"([0-9a-fA-F:]+)", str, + "OVS_TUNNEL_KEY_ATTR_IPV6_SRC", + "ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff", "::", True), + ("ipv6_dst=", r"([0-9a-fA-F:]+)", str, + "OVS_TUNNEL_KEY_ATTR_IPV6_DST", + "ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff", "::", True), + + ("tos=", r"(\d+)", int, "OVS_TUNNEL_KEY_ATTR_TOS", 255, 0, + None), + ("ttl=", r"(\d+)", int, "OVS_TUNNEL_KEY_ATTR_TTL", 255, 0, + None), + + ("tp_src=", r"(\d+)", int, "OVS_TUNNEL_KEY_ATTR_TP_SRC", + 65535, 0, None), + ("tp_dst=", r"(\d+)", int, "OVS_TUNNEL_KEY_ATTR_TP_DST", + 65535, 0, None), + ] + + forced_include = ["OVS_TUNNEL_KEY_ATTR_TTL"] + + for prefix, regex, typ, attr_name, mask_val, default_val, v46_flag in fields: + flowstr, value = parse_extract_field(flowstr, prefix, regex, typ, False)
tools/testing/selftests/net/openvswitch/ovs-dpctl.py class ovskey(nla): · line 1345
Quoted 10 lines
tools/testing/selftests/net/openvswitch/ovs-dpctl.py +10
-0+ if not attr_name: + raise Exception("Bad list value in tunnel fields") + + if value is None and attr_name in forced_include: + value = default_val + mask_val = default_val + + if value is not None: + if v6_address is None and v46_flag is not None: + v6_address = v46_flag
By my reading, at this point v6_address will only be None if v46_flag is not None. IF so, the condition below seems excessive.
tools/testing/selftests/net/openvswitch/ovs-dpctl.py class ovskey(nla): · line 1348
Quoted 3 lines
tools/testing/selftests/net/openvswitch/ovs-dpctl.py +3
-0+ if v6_address is not None and v46_flag is not None \ + and v46_flag != v6_address: + raise ValueError("Cannot mix v6 and v4 addresses")
I wonder if we can instead express this as (completely untested!):
if v46_flag is not None:
if v6_address is None:
v6_address = v46_flag
if v46_flag != v6_address:
raise ValueError("Cannot mix v6 and v4 addresses")
tools/testing/selftests/net/openvswitch/ovs-dpctl.py class ovskey(nla): · line 1357
Quoted 9 lines
tools/testing/selftests/net/openvswitch/ovs-dpctl.py +9
-0+ k["attrs"].append([attr_name, value]) + if mask is not None: + mask["attrs"].append([attr_name, mask_val]) + else: + if v6_address is not None and v46_flag is not None \ + and v46_flag != v6_address: + continue + if v6_address is None and v46_flag is not None: + continue
And I wonder if this is a bit easier on the eyes (also completely untested):
if v46_flag is not None:
if v6_address is None or v46_flag != v6_address:
continue
Quoted 5 lines
tools/testing/selftests/net/openvswitch/ovs-dpctl.py +5
-0+ if mask is not None: + mask["attrs"].append([attr_name, default_val]) + + if k["attrs"][0][0] != "OVS_TUNNEL_KEY_ATTR_ID": + raise ValueError("Needs a tunid set")
...
tools/testing/selftests/net/openvswitch/ovs-dpctl.py class OvsVport(GenericNetlinkSocket): · line 1911
Quoted 9 lines
tools/testing/selftests/net/openvswitch/ovs-dpctl.py +1
-1@@ -1745,7 +1905,7 @@ class OvsVport(GenericNetlinkSocket): ) TUNNEL_DEFAULTS = [("geneve", 6081), - ("vxlan", 4798)] + ("vxlan", 4789)] for tnl in TUNNEL_DEFAULTS: if ptype == tnl[0]:
As noted in my response to PATCH 1/7, I think that the change in the hunk above belongs there rather than here.
Aaron Conole
maintainerRe: [ovs-dev] [RFC net-next 4/7] selftests: openvswitch: Add support for tunnel() key.
Quoted 87 lines · Simon Horman
Quoted 6 lines · Aaron Conole
This will be used when setting details about the tunnel to use as transport. There is a difference between the ODP format between
tunnel():
the 'key' flag is not actually a flag field, so we don't support it in the same way that the vswitchd userspace supports displaying it.Signed-off-by Aaron Conole <[email protected]>...
Quoted 77 lines
tools/testing/selftests/net/openvswitch/ovs-dpctl.py +73
-0@@ -1265,6 +1265,165 @@ class ovskey(nla): init=init, ) + class ovs_key_tunnel(nla): + nla_flags = NLA_F_NESTED + + nla_map = ( + ("OVS_TUNNEL_KEY_ATTR_ID", "be64"), + ("OVS_TUNNEL_KEY_ATTR_IPV4_SRC", "ipaddr"), + ("OVS_TUNNEL_KEY_ATTR_IPV4_DST", "ipaddr"), + ("OVS_TUNNEL_KEY_ATTR_TOS", "uint8"), + ("OVS_TUNNEL_KEY_ATTR_TTL", "uint8"), + ("OVS_TUNNEL_KEY_ATTR_DONT_FRAGMENT", "flag"), + ("OVS_TUNNEL_KEY_ATTR_CSUM", "flag"), + ("OVS_TUNNEL_KEY_ATTR_OAM", "flag"), + ("OVS_TUNNEL_KEY_ATTR_GENEVE_OPTS", "array(uint32)"), + ("OVS_TUNNEL_KEY_ATTR_TP_SRC", "be16"), + ("OVS_TUNNEL_KEY_ATTR_TP_DST", "be16"), + ("OVS_TUNNEL_KEY_ATTR_VXLAN_OPTS", "none"), + ("OVS_TUNNEL_KEY_ATTR_IPV6_SRC", "ipaddr"), + ("OVS_TUNNEL_KEY_ATTR_IPV6_DST", "ipaddr"), + ("OVS_TUNNEL_KEY_ATTR_PAD", "none"), + ("OVS_TUNNEL_KEY_ATTR_ERSPAN_OPTS", "none"), + ("OVS_TUNNEL_KEY_ATTR_IPV4_INFO_BRIDGE", "flag"), + ) + + def parse(self, flowstr, mask=None): + if not flowstr.startswith("tunnel("): + return None, None + + k = ovskey.ovs_key_tunnel() + if mask is not None: + mask = ovskey.ovs_key_tunnel() + + flowstr = flowstr[len("tunnel("):] + + v6_address = None + + fields = [ + ("tun_id=", r"(\d+)", int, "OVS_TUNNEL_KEY_ATTR_ID", + 0xffffffffffffffff, None, None), + + ("src=", r"([0-9a-fA-F\.]+)", str, + "OVS_TUNNEL_KEY_ATTR_IPV4_SRC", "255.255.255.255", "0.0.0.0", + False), + ("dst=", r"([0-9a-fA-F\.]+)", str, + "OVS_TUNNEL_KEY_ATTR_IPV4_DST", "255.255.255.255", "0.0.0.0", + False), + + ("ipv6_src=", r"([0-9a-fA-F:]+)", str, + "OVS_TUNNEL_KEY_ATTR_IPV6_SRC", + "ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff", "::", True), + ("ipv6_dst=", r"([0-9a-fA-F:]+)", str, + "OVS_TUNNEL_KEY_ATTR_IPV6_DST", + "ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff", "::", True), + + ("tos=", r"(\d+)", int, "OVS_TUNNEL_KEY_ATTR_TOS", 255, 0, + None), + ("ttl=", r"(\d+)", int, "OVS_TUNNEL_KEY_ATTR_TTL", 255, 0, + None), + + ("tp_src=", r"(\d+)", int, "OVS_TUNNEL_KEY_ATTR_TP_SRC", + 65535, 0, None), + ("tp_dst=", r"(\d+)", int, "OVS_TUNNEL_KEY_ATTR_TP_DST", + 65535, 0, None), + ] + + forced_include = ["OVS_TUNNEL_KEY_ATTR_TTL"] + + for prefix, regex, typ, attr_name, mask_val, default_val, v46_flag in fields: + flowstr, value = parse_extract_field(flowstr, prefix, regex, typ, False) + if not attr_name: + raise Exception("Bad list value in tunnel fields") + + if value is None and attr_name in forced_include: + value = default_val
Quoted 8 lines
tools/testing/selftests/net/openvswitch/ovs-dpctl.py class ovskey(nla): · line 1345
Quoted 5 lines
tools/testing/selftests/net/openvswitch/ovs-dpctl.py +5
-0+ mask_val = default_val + + if value is not None: + if v6_address is None and v46_flag is not None: + v6_address = v46_flagBy my reading, at this point
v6_addresswill only be None ifv46_flagis not None. IF so, the condition below seems excessive.
Agreed - thanks for the suggestions.
Quoted 22 lines
tools/testing/selftests/net/openvswitch/ovs-dpctl.py class ovskey(nla): · line 1348
Quoted 3 lines
tools/testing/selftests/net/openvswitch/ovs-dpctl.py +3
-0+ if v6_address is not None and v46_flag is not None \ + and v46_flag != v6_address: + raise ValueError("Cannot mix v6 and v4 addresses")I wonder if we can instead express this as (completely untested!):
if
v46_flagis not None:
ifv6_addressis None:
v6_address=v46_flag
ifv46_flag!=v6_address:
raiseValueError("Cannot mix v6 and v4 addresses")tools/testing/selftests/net/openvswitch/ovs-dpctl.py class ovskey(nla): · line 1357
Quoted 9 lines
tools/testing/selftests/net/openvswitch/ovs-dpctl.py +9
-0+ k["attrs"].append([attr_name, value]) + if mask is not None: + mask["attrs"].append([attr_name, mask_val]) + else: + if v6_address is not None and v46_flag is not None \ + and v46_flag != v6_address: + continue + if v6_address is None and v46_flag is not None: + continue
Quoted 5 lines
And I wonder if this is a bit easier on the eyes (also completely untested):
if
v46_flagis not None:
ifv6_addressis None orv46_flag!=v6_address:
continue
I folded both of these in and did some quick testing. Thanks Simon!
Quoted 20 lines
Quoted 5 lines
tools/testing/selftests/net/openvswitch/ovs-dpctl.py +5
-0+ if mask is not None: + mask["attrs"].append([attr_name, default_val]) + + if k["attrs"][0][0] != "OVS_TUNNEL_KEY_ATTR_ID": + raise ValueError("Needs a tunid set")...
tools/testing/selftests/net/openvswitch/ovs-dpctl.py class OvsVport(GenericNetlinkSocket): · line 1911
Quoted 9 lines
tools/testing/selftests/net/openvswitch/ovs-dpctl.py +1
-1@@ -1745,7 +1905,7 @@ class OvsVport(GenericNetlinkSocket): ) TUNNEL_DEFAULTS = [("geneve", 6081), - ("vxlan", 4798)] + ("vxlan", 4789)] for tnl in TUNNEL_DEFAULTS: if ptype == tnl[0]:As noted in my response to PATCH 1/7, I think that the change in the hunk above belongs there rather than here.
Aaron Conole
maintainerRFC 5/7 selftests: openvswitch: Support implicit ipv6 arguments.
In reply to Aaron ConoleThe current iteration of IPv6 support requires explicit fields to be set in addition to not properly support the actual IPv6 addresses properly. With this change, make it so that the ipv6() bare option is usable to create wildcarded flows to match broad swaths of ipv6 traffic.
--- .../selftests/net/openvswitch/ovs-dpctl.py | 43 ++++++++++++------- 1 file changed, 28 insertions(+), 15 deletions(-)
tools/testing/selftests/net/openvswitch/ovs-dpctl.py +28 -15
@@ -200,6 +200,19 @@ def convert_ipv4(data): return int(ipaddress.IPv4Address(ip)), int(ipaddress.IPv4Address(mask)) +def convert_ipv6(data): + ip, _, mask = data.partition('/') + + if not ip: + ip = mask = 0 + elif not mask: + mask = 'ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff' + elif mask.isdigit(): + mask = ipaddress.IPv6Network("::/" + mask).hostmask + + return ipaddress.IPv6Address(ip).packed, ipaddress.IPv6Address(mask).packed + + def convert_int(size): def convert_int_sized(data): value, _, mask = data.partition('/')
@@ -937,21 +950,21 @@ class ovskey(nla): "src", "src", lambda x: str(ipaddress.IPv6Address(x)), - lambda x: int.from_bytes(x, "big"), - lambda x: ipaddress.IPv6Address(x), + lambda x: ipaddress.IPv6Address(x).packed if x else 0, + convert_ipv6, ), ( "dst", "dst", lambda x: str(ipaddress.IPv6Address(x)), - lambda x: int.from_bytes(x, "big"), - lambda x: ipaddress.IPv6Address(x), + lambda x: ipaddress.IPv6Address(x).packed if x else 0, + convert_ipv6, ), - ("label", "label", "%d", int), - ("proto", "proto", "%d", int), - ("tclass", "tclass", "%d", int), - ("hlimit", "hlimit", "%d", int), - ("frag", "frag", "%d", int), + ("label", "label", "%d", lambda x: int(x) if x else 0), + ("proto", "proto", "%d", lambda x: int(x) if x else 0), + ("tclass", "tclass", "%d", lambda x: int(x) if x else 0), + ("hlimit", "hlimit", "%d", lambda x: int(x) if x else 0), + ("frag", "frag", "%d", lambda x: int(x) if x else 0), ) def __init__(
@@ -1148,8 +1161,8 @@ class ovskey(nla): ( "target", "target", - lambda x: str(ipaddress.IPv6Address(x)), - lambda x: int.from_bytes(x, "big"), + lambda x: ipaddress.IPv6Address(x).packed, + convert_ipv6, ), ("sll", "sll", macstr, lambda x: int.from_bytes(x, "big")), ("tll", "tll", macstr, lambda x: int.from_bytes(x, "big")),
@@ -1233,14 +1246,14 @@ class ovskey(nla): ( "src", "src", - lambda x: str(ipaddress.IPv6Address(x)), - lambda x: int.from_bytes(x, "big", convertmac), + lambda x: ipaddress.IPv6Address(x).packed, + convert_ipv6, ), ( "dst", "dst", - lambda x: str(ipaddress.IPv6Address(x)), - lambda x: int.from_bytes(x, "big"), + lambda x: ipaddress.IPv6Address(x).packed, + convert_ipv6, ), ("tp_src", "tp_src", "%d", int), ("tp_dst", "tp_dst", "%d", int),
Signature · 1 line
2.45.1
Re: [ovs-dev] [RFC net-next 5/7] selftests: openvswitch: Support implicit ipv6 arguments.
Quoted 21 lines · Aaron Conole
The current iteration of IPv6 support requires explicit fields to be set in addition to not properly support the actual IPv6 addresses properly. With this change, make it so that the
ipv6()bare option is usable to create wildcarded flows to match broad swaths of ipv6 traffic.Signed-off-by Aaron Conole <[email protected]>--- .../selftests/net/openvswitch/ovs-dpctl.py | 43 ++++++++++++------- 1 file changed, 28 insertions(+), 15 deletions(-)tools/testing/selftests/net/openvswitch/ovs-dpctl.py +3
-0@@ -200,6 +200,19 @@ def convert_ipv4(data): return int(ipaddress.IPv4Address(ip)), int(ipaddress.IPv4Address(mask)) +def convert_ipv6(data): + ip, _, mask = data.partition('/') +
tools/testing/selftests/net/openvswitch/ovs-dpctl.py def convert_ipv4(data): · line 215
Quoted 10 lines
tools/testing/selftests/net/openvswitch/ovs-dpctl.py +10
-0+ if not ip: + ip = mask = 0 + elif not mask: + mask = 'ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff' + elif mask.isdigit(): + mask = ipaddress.IPv6Network("::/" + mask).hostmask + + return ipaddress.IPv6Address(ip).packed, ipaddress.IPv6Address(mask).packed + +
nit: Perhaps one blank line is enough
tools/testing/selftests/net/openvswitch/ovs-dpctl.py def convert_ipv4(data): · line 218
Quoted 3 lines
tools/testing/selftests/net/openvswitch/ovs-dpctl.py +0
-0def convert_int(size): def convert_int_sized(data): value, _, mask = data.partition('/')
...
The nit above notwithstanding, this patch looks good to me.
Aaron Conole
maintainerRe: [ovs-dev] [RFC net-next 5/7] selftests: openvswitch: Support implicit ipv6 arguments.
Quoted 19 lines · Simon Horman
Quoted 18 lines · Aaron Conole
The current iteration of IPv6 support requires explicit fields to be set in addition to not properly support the actual IPv6 addresses properly. With this change, make it so that the
ipv6()bare option is usable to create wildcarded flows to match broad swaths of ipv6 traffic.Signed-off-by Aaron Conole <[email protected]>--- .../selftests/net/openvswitch/ovs-dpctl.py | 43 ++++++++++++------- 1 file changed, 28 insertions(+), 15 deletions(-)tools/testing/selftests/net/openvswitch/ovs-dpctl.py +0
-0@@ -200,6 +200,19 @@ def convert_ipv4(data): return int(ipaddress.IPv4Address(ip)), int(ipaddress.IPv4Address(mask))
Quoted 15 lines
tools/testing/selftests/net/openvswitch/ovs-dpctl.py def convert_ipv4(data): · line 215
Quoted 13 lines
tools/testing/selftests/net/openvswitch/ovs-dpctl.py +13
-0+def convert_ipv6(data): + ip, _, mask = data.partition('/') + + if not ip: + ip = mask = 0 + elif not mask: + mask = 'ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff' + elif mask.isdigit(): + mask = ipaddress.IPv6Network("::/" + mask).hostmask + + return ipaddress.IPv6Address(ip).packed, ipaddress.IPv6Address(mask).packed + +nit: Perhaps one blank line is enough
Sure - dropped.
Quoted 10 lines
tools/testing/selftests/net/openvswitch/ovs-dpctl.py def convert_ipv4(data): · line 218
Quoted 3 lines
tools/testing/selftests/net/openvswitch/ovs-dpctl.py +0
-0def convert_int(size): def convert_int_sized(data): value, _, mask = data.partition('/')...
The nit above notwithstanding, this patch looks good to me.
Reviewed-by Simon Horman <[email protected]>Tested-by Simon Horman <[email protected]>
Aaron Conole
maintainerRFC 6/7 selftests: net: Use the provided dpctl rather than the vswitchd for tests.
In reply to Aaron ConoleThe current pmtu test infrastucture requires an installed copy of the ovs-vswitchd userspace. This means that any automated or constrained environments may not have the requisite tools to run the tests. However, the pmtu tests don't require any special classifier processing. Indeed they are only using the vswitchd in the most basic mode - as a NORMAL switch.
However, the ovs-dpctl kernel utility can now program all the needed basic flows to allow traffic to traverse the tunnels and provide support for at least testing some basic pmtu scenarios. More complicated flow pipelines can be added to the internal ovs test infrastructure, but that is work for the future. For now, enable the most common cases - wide mega flows with no other prerequisites.
--- tools/testing/selftests/net/pmtu.sh | 87 ++++++++++++++++++++++------- 1 file changed, 67 insertions(+), 20 deletions(-)
tools/testing/selftests/net/pmtu.sh +67 -20
@@ -846,22 +846,73 @@ setup_ovs_vxlan_or_geneve() { type="${1}" a_addr="${2}" b_addr="${3}" + dport="6081" if [ "${type}" = "vxlan" ]; then + dport="4789" opts="${opts} ttl 64 dstport 4789" opts_b="local ${b_addr}" fi - run_cmd ovs-vsctl add-port ovs_br0 ${type}_a -- \ - set interface ${type}_a type=${type} \ - options:remote_ip=${b_addr} options:key=1 options:csum=true || return 1 - + run_cmd python3 ./openvswitch/ovs-dpctl.py add-if ovs_br0 ${type}_a -t ${type} run_cmd ${ns_b} ip link add ${type}_b type ${type} id 1 ${opts_b} remote ${a_addr} ${opts} || return 1 run_cmd ${ns_b} ip addr add ${tunnel4_b_addr}/${tunnel4_mask} dev ${type}_b run_cmd ${ns_b} ip addr add ${tunnel6_b_addr}/${tunnel6_mask} dev ${type}_b + run_cmd ip link set ${type}_a up run_cmd ${ns_b} ip link set ${type}_b up + + ports=$(python3 ./openvswitch/ovs-dpctl.py show) + br0_port=$(echo "$ports" | grep -E "\sovs_br0" | sed -e 's@port @@' | cut -d: -f1 | xargs) + type_a_port=$(echo "$ports" | grep ${type}_a | sed -e 's@port @@' | cut -d: -f1 | xargs) + veth_a_port=$(echo "$ports" | grep veth_A | sed -e 's@port @@' | cut -d: -f1 | xargs) + + v4_a_tun="${prefix4}.${a_r1}.1" + v4_b_tun="${prefix4}.${b_r1}.1" + + v6_a_tun="${prefix6}:${a_r1}::1" + v6_b_tun="${prefix6}:${b_r1}::1" + + if [ "${v4_a_tun}" == "${a_addr}" ]; then + run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \ + "recirc_id(0),in_port(${veth_a_port}),eth(),eth_type(0x0800),ipv4()" \ + "set(tunnel(tun_id=1,dst=${v4_b_tun},ttl=64,tp_dst=${dport},flags(df|csum))),${type_a_port}" + run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \ + "recirc_id(0),in_port(${veth_a_port}),eth(),eth_type(0x86dd),ipv6()" \ + "set(tunnel(tun_id=1,dst=${v4_b_tun},ttl=64,tp_dst=${dport},flags(df|csum))),${type_a_port}" + run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \ + "recirc_id(0),tunnel(tun_id=1,src=${v4_b_tun},dst=${v4_a_tun}),in_port(${type_a_port}),eth(),eth_type(0x0800),ipv4()" \ + "${veth_a_port}" + run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \ + "recirc_id(0),tunnel(tun_id=1,src=${v4_b_tun},dst=${v4_a_tun}),in_port(${type_a_port}),eth(),eth_type(0x86dd),ipv6()" \ + "${veth_a_port}" + run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \ + "recirc_id(0),tunnel(tun_id=1,src=${v4_b_tun},dst=${v4_a_tun}),in_port(${type_a_port}),eth(),eth_type(0x0806),arp()" \ + "${veth_a_port}" + run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \ + "recirc_id(0),in_port(${veth_a_port}),eth(),eth_type(0x0806),arp(sip=${veth4_c_addr},tip=${tunnel4_b_addr})" \ + "set(tunnel(tun_id=1,dst=${v4_b_tun},ttl=64,tp_dst=${dport},flags(df|csum))),${type_a_port}" + else + run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \ + "recirc_id(0),in_port(${veth_a_port}),eth(),eth_type(0x0800),ipv4()" \ + "set(tunnel(tun_id=1,ipv6_dst=${v6_b_tun},ttl=64,tp_dst=${dport},flags(df|csum))),${type_a_port}" + run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \ + "recirc_id(0),in_port(${veth_a_port}),eth(),eth_type(0x86dd),ipv6()" \ + "set(tunnel(tun_id=1,ipv6_dst=${v6_b_tun},ttl=64,tp_dst=${dport},flags(df|csum))),${type_a_port}" + run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \ + "recirc_id(0),tunnel(tun_id=1,ipv6_src=${v6_b_tun},ipv6_dst=${v6_a_tun}),in_port(${type_a_port}),eth(),eth_type(0x0800),ipv4()" \ + "${veth_a_port}" + run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \ + "recirc_id(0),tunnel(tun_id=1,ipv6_src=${v6_b_tun},ipv6_dst=${v6_a_tun}),in_port(${type_a_port}),eth(),eth_type(0x86dd),ipv6()" \ + "${veth_a_port}" + run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \ + "recirc_id(0),tunnel(tun_id=1,ipv6_src=${v6_b_tun},ipv6_dst=${v6_a_tun}),in_port(${type_a_port}),eth(),eth_type(0x0806),arp()" \ + "${veth_a_port}" + run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \ + "recirc_id(0),in_port(${veth_a_port}),eth(),eth_type(0x0806),arp(sip=${veth4_c_addr},tip=${tunnel4_b_addr})" \ + "set(tunnel(tun_id=1,ipv6_dst=${v6_b_tun},ttl=64,tp_dst=${dport},flags(df|csum))),${type_a_port}" + fi } setup_ovs_geneve4() {
@@ -881,7 +932,7 @@ setup_ovs_vxlan6() { } setup_ovs_bridge() { - run_cmd ovs-vsctl add-br ovs_br0 || return $ksft_skip + run_cmd python3 ./openvswitch/ovs-dpctl.py add-dp ovs_br0 || return $ksft_skip run_cmd ip link set ovs_br0 up run_cmd ${ns_c} ip link add veth_C-A type veth peer name veth_A-C
@@ -891,7 +942,7 @@ setup_ovs_bridge() { run_cmd ${ns_c} ip link set veth_C-A up run_cmd ${ns_c} ip addr add ${veth4_c_addr}/${veth4_mask} dev veth_C-A run_cmd ${ns_c} ip addr add ${veth6_c_addr}/${veth6_mask} dev veth_C-A - run_cmd ovs-vsctl add-port ovs_br0 veth_A-C + run_cmd python3 ./openvswitch/ovs-dpctl.py add-if ovs_br0 veth_A-C # Move veth_A-R1 to init run_cmd ${ns_a} ip link set veth_A-R1 netns 1
@@ -942,8 +993,10 @@ cleanup() { ip link del veth_A-C 2>/dev/null ip link del veth_A-R1 2>/dev/null - ovs-vsctl --if-exists del-port vxlan_a 2>/dev/null - ovs-vsctl --if-exists del-br ovs_br0 2>/dev/null + # squelch the output of the del-if commands since it can be wordy + python3 ./openvswitch/ovs-dpctl.py del-if ovs_br0 -d true vxlan_a >/dev/null 2>&1 + python3 ./openvswitch/ovs-dpctl.py del-if ovs_br0 -d true geneve_a >/dev/null 2>&1 + python3 ./openvswitch/ovs-dpctl.py del-dp ovs_br0 >/dev/null 2>&1 rm -f "$tmpoutfile" }
@@ -1407,16 +1460,10 @@ test_pmtu_ipvX_over_ovs_vxlanY_or_geneveY_exception() { exp_mtu=$((${ll_mtu} - 40 - 8 - 8 - 14)) fi - if [ "${type}" = "vxlan" ]; then - tun_a="vxlan_sys_4789" - elif [ "${type}" = "geneve" ]; then - tun_a="genev_sys_6081" - fi - - trace "" "${tun_a}" "${ns_b}" ${type}_b \ - "" veth_A-R1 "${ns_r1}" veth_R1-A \ - "${ns_b}" veth_B-R1 "${ns_r1}" veth_R1-B \ - "" ovs_br0 "" veth-A-C \ + trace "" "${type}_a" "${ns_b}" ${type}_b \ + "" veth_A-R1 "${ns_r1}" veth_R1-A \ + "${ns_b}" veth_B-R1 "${ns_r1}" veth_R1-B \ + "" ovs_br0 "" veth-A_C \ "${ns_c}" veth_C-A if [ ${family} -eq 4 ]; then
@@ -1436,8 +1483,8 @@ test_pmtu_ipvX_over_ovs_vxlanY_or_geneveY_exception() { mtu "${ns_b}" veth_B-R1 ${ll_mtu} mtu "${ns_r1}" veth_R1-B ${ll_mtu} - mtu "" ${tun_a} $((${ll_mtu} + 1000)) - mtu "${ns_b}" ${type}_b $((${ll_mtu} + 1000)) + mtu "" ${type}_a $((${ll_mtu} + 1000)) + mtu "${ns_b}" ${type}_b $((${ll_mtu} + 1000)) run_cmd ${ns_c} ${ping} -q -M want -i 0.1 -c 20 -s $((${ll_mtu} + 500)) ${dst} || return 1
Signature · 1 line
2.45.1
Re: [RFC net-next 6/7] selftests: net: Use the provided dpctl rather than the vswitchd for tests.
Quoted 10 lines · On Thu, 13 Jun 2024 14:13:32 -0400 Aaron Conole <[email protected]> wrote:
The current pmtu test infrastucture requires an installed copy of the ovs-vswitchd userspace. This means that any automated or constrained environments may not have the requisite tools to run the tests. However, the pmtu tests don't require any special classifier processing. Indeed they are only using the vswitchd in the most basic mode - as a NORMAL switch.
However, the ovs-dpctl kernel utility can now program all the needed basic flows to allow traffic to traverse the tunnels and provide support for at least testing some basic pmtu scenarios.
I didn't know about that tool, that looks like a nice improvement. A few comments below (mostly nits):
Quoted 21 lines
More complicated flow pipelines
can be added to the internal ovs test infrastructure, but that is work for the future. For now, enable the most common cases - wide mega flows with no other prerequisites.Signed-off-by Aaron Conole <[email protected]>--- tools/testing/selftests/net/pmtu.sh | 87 ++++++++++++++++++++++------- 1 file changed, 67 insertions(+), 20 deletions(-)tools/testing/selftests/net/pmtu.sh +1
-0@@ -846,22 +846,73 @@ setup_ovs_vxlan_or_geneve() { type="${1}" a_addr="${2}" b_addr="${3}" + dport="6081" if [ "${type}" = "vxlan" ]; then
tools/testing/selftests/net/pmtu.sh setup_ovs_vxlan_or_geneve() { · line 857
Quoted 10 lines
tools/testing/selftests/net/pmtu.sh +2
-4+ dport="4789" opts="${opts} ttl 64 dstport 4789" opts_b="local ${b_addr}" fi - run_cmd ovs-vsctl add-port ovs_br0 ${type}_a -- \ - set interface ${type}_a type=${type} \ - options:remote_ip=${b_addr} options:key=1 options:csum=true || return 1 - + run_cmd python3 ./openvswitch/ovs-dpctl.py add-if ovs_br0 ${type}_a -t ${type}
In some restricted environments, it might actually be more convenient to carry around ovs-vsctl than Python with (Python) libraries.
Nowadays I typically (albeit seldom) run kselftests in throw-away VM images made by mbuto (https://mbuto.sh/, see demo on the right), and while it copies python3 and dynamic libraries from the host, adding Python libraries such as pyroute2 gets quite complicated.
So I'm wondering, if it's not too messy: could we have two functions starting from approximately here (say, setup_ovs_dpctl() and setup_ovs_vsctl()), try with ovs-dpctl first, and, if that fails, fall back to ovs-vsctl?
Quoted 10 lines
tools/testing/selftests/net/pmtu.sh +4
-0run_cmd ${ns_b} ip link add ${type}_b type ${type} id 1 ${opts_b} remote ${a_addr} ${opts} || return 1 run_cmd ${ns_b} ip addr add ${tunnel4_b_addr}/${tunnel4_mask} dev ${type}_b run_cmd ${ns_b} ip addr add ${tunnel6_b_addr}/${tunnel6_mask} dev ${type}_b + run_cmd ip link set ${type}_a up run_cmd ${ns_b} ip link set ${type}_b up + + ports=$(python3 ./openvswitch/ovs-dpctl.py show) + br0_port=$(echo "$ports" | grep -E "\sovs_br0" | sed -e 's@port @@' | cut -d: -f1 | xargs)
tools/testing/selftests/net/pmtu.sh setup_ovs_vxlan_or_geneve() { · line 877
Quoted 10 lines
tools/testing/selftests/net/pmtu.sh +10
-0+ type_a_port=$(echo "$ports" | grep ${type}_a | sed -e 's@port @@' | cut -d: -f1 | xargs) + veth_a_port=$(echo "$ports" | grep veth_A | sed -e 's@port @@' | cut -d: -f1 | xargs) + + v4_a_tun="${prefix4}.${a_r1}.1" + v4_b_tun="${prefix4}.${b_r1}.1" + + v6_a_tun="${prefix6}:${a_r1}::1" + v6_b_tun="${prefix6}:${b_r1}::1" + + if [ "${v4_a_tun}" == "${a_addr}" ]; then
I see now that 05d92cb0e919 ("selftests/net: change shebang to bash to support "source"") turned this into a Bash script (for no real reason, lib.sh could have simply been sourced with '.' instead).
Other than that, this happily runs with dash and possibly others, and:
$ checkbashisms -f pmtu.sh possible bashism in pmtu.sh line 201 (should be '.', not 'source'): source lib.sh possible bashism in pmtu.sh line 202 (should be '.', not 'source'): source net_helper.sh
Would it be possible to change this to POSIX shell:
if [ "${v4_a_tun}" = "${a_addr}" ]; theneven just for consistency with the rest of the file?
Quoted 60 lines
tools/testing/selftests/net/pmtu.sh +40
-2+ run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \ + "recirc_id(0),in_port(${veth_a_port}),eth(),eth_type(0x0800),ipv4()" \ + "set(tunnel(tun_id=1,dst=${v4_b_tun},ttl=64,tp_dst=${dport},flags(df|csum))),${type_a_port}" + run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \ + "recirc_id(0),in_port(${veth_a_port}),eth(),eth_type(0x86dd),ipv6()" \ + "set(tunnel(tun_id=1,dst=${v4_b_tun},ttl=64,tp_dst=${dport},flags(df|csum))),${type_a_port}" + run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \ + "recirc_id(0),tunnel(tun_id=1,src=${v4_b_tun},dst=${v4_a_tun}),in_port(${type_a_port}),eth(),eth_type(0x0800),ipv4()" \ + "${veth_a_port}" + run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \ + "recirc_id(0),tunnel(tun_id=1,src=${v4_b_tun},dst=${v4_a_tun}),in_port(${type_a_port}),eth(),eth_type(0x86dd),ipv6()" \ + "${veth_a_port}" + run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \ + "recirc_id(0),tunnel(tun_id=1,src=${v4_b_tun},dst=${v4_a_tun}),in_port(${type_a_port}),eth(),eth_type(0x0806),arp()" \ + "${veth_a_port}" + run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \ + "recirc_id(0),in_port(${veth_a_port}),eth(),eth_type(0x0806),arp(sip=${veth4_c_addr},tip=${tunnel4_b_addr})" \ + "set(tunnel(tun_id=1,dst=${v4_b_tun},ttl=64,tp_dst=${dport},flags(df|csum))),${type_a_port}" + else + run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \ + "recirc_id(0),in_port(${veth_a_port}),eth(),eth_type(0x0800),ipv4()" \ + "set(tunnel(tun_id=1,ipv6_dst=${v6_b_tun},ttl=64,tp_dst=${dport},flags(df|csum))),${type_a_port}" + run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \ + "recirc_id(0),in_port(${veth_a_port}),eth(),eth_type(0x86dd),ipv6()" \ + "set(tunnel(tun_id=1,ipv6_dst=${v6_b_tun},ttl=64,tp_dst=${dport},flags(df|csum))),${type_a_port}" + run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \ + "recirc_id(0),tunnel(tun_id=1,ipv6_src=${v6_b_tun},ipv6_dst=${v6_a_tun}),in_port(${type_a_port}),eth(),eth_type(0x0800),ipv4()" \ + "${veth_a_port}" + run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \ + "recirc_id(0),tunnel(tun_id=1,ipv6_src=${v6_b_tun},ipv6_dst=${v6_a_tun}),in_port(${type_a_port}),eth(),eth_type(0x86dd),ipv6()" \ + "${veth_a_port}" + run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \ + "recirc_id(0),tunnel(tun_id=1,ipv6_src=${v6_b_tun},ipv6_dst=${v6_a_tun}),in_port(${type_a_port}),eth(),eth_type(0x0806),arp()" \ + "${veth_a_port}" + run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \ + "recirc_id(0),in_port(${veth_a_port}),eth(),eth_type(0x0806),arp(sip=${veth4_c_addr},tip=${tunnel4_b_addr})" \ + "set(tunnel(tun_id=1,ipv6_dst=${v6_b_tun},ttl=64,tp_dst=${dport},flags(df|csum))),${type_a_port}" + fi } setup_ovs_geneve4() {@@ -881,7 +932,7 @@ setup_ovs_vxlan6() { } setup_ovs_bridge() { - run_cmd ovs-vsctl add-br ovs_br0 || return $ksft_skip + run_cmd python3 ./openvswitch/ovs-dpctl.py add-dp ovs_br0 || return $ksft_skip run_cmd ip link set ovs_br0 up run_cmd ${ns_c} ip link add veth_C-A type veth peer name veth_A-C@@ -891,7 +942,7 @@ setup_ovs_bridge() { run_cmd ${ns_c} ip link set veth_C-A up run_cmd ${ns_c} ip addr add ${veth4_c_addr}/${veth4_mask} dev veth_C-A run_cmd ${ns_c} ip addr add ${veth6_c_addr}/${veth6_mask} dev veth_C-A - run_cmd ovs-vsctl add-port ovs_br0 veth_A-C + run_cmd python3 ./openvswitch/ovs-dpctl.py add-if ovs_br0 veth_A-C # Move veth_A-R1 to init run_cmd ${ns_a} ip link set veth_A-R1 netns 1
tools/testing/selftests/net/pmtu.sh cleanup() { · line 999
Quoted 9 lines
tools/testing/selftests/net/pmtu.sh +4
-2@@ -942,8 +993,10 @@ cleanup() { ip link del veth_A-C 2>/dev/null ip link del veth_A-R1 2>/dev/null - ovs-vsctl --if-exists del-port vxlan_a 2>/dev/null - ovs-vsctl --if-exists del-br ovs_br0 2>/dev/null + # squelch the output of the del-if commands since it can be wordy + python3 ./openvswitch/ovs-dpctl.py del-if ovs_br0 -d true vxlan_a >/dev/null 2>&1 + python3 ./openvswitch/ovs-dpctl.py del-if ovs_br0 -d true geneve_a >/dev/null 2>&1 + python3 ./openvswitch/ovs-dpctl.py del-dp ovs_br0 >/dev/null 2>&1
The idea behind those tabs before 2>/dev/null was to keep them aligned and make those redirections a bit easier on the eyes.
If you add more, you could keep those aligned as well -- or just decide that lines are too long and drop the tabs altogether.
Quoted 35 lines
tools/testing/selftests/net/pmtu.sh +6
-12rm -f "$tmpoutfile" }@@ -1407,16 +1460,10 @@ test_pmtu_ipvX_over_ovs_vxlanY_or_geneveY_exception() { exp_mtu=$((${ll_mtu} - 40 - 8 - 8 - 14)) fi - if [ "${type}" = "vxlan" ]; then - tun_a="vxlan_sys_4789" - elif [ "${type}" = "geneve" ]; then - tun_a="genev_sys_6081" - fi - - trace "" "${tun_a}" "${ns_b}" ${type}_b \ - "" veth_A-R1 "${ns_r1}" veth_R1-A \ - "${ns_b}" veth_B-R1 "${ns_r1}" veth_R1-B \ - "" ovs_br0 "" veth-A-C \ + trace "" "${type}_a" "${ns_b}" ${type}_b \ + "" veth_A-R1 "${ns_r1}" veth_R1-A \ + "${ns_b}" veth_B-R1 "${ns_r1}" veth_R1-B \ + "" ovs_br0 "" veth-A_C \ "${ns_c}" veth_C-A if [ ${family} -eq 4 ]; then@@ -1436,8 +1483,8 @@ test_pmtu_ipvX_over_ovs_vxlanY_or_geneveY_exception() { mtu "${ns_b}" veth_B-R1 ${ll_mtu} mtu "${ns_r1}" veth_R1-B ${ll_mtu} - mtu "" ${tun_a} $((${ll_mtu} + 1000)) - mtu "${ns_b}" ${type}_b $((${ll_mtu} + 1000)) + mtu "" ${type}_a $((${ll_mtu} + 1000)) + mtu "${ns_b}" ${type}_b $((${ll_mtu} + 1000)) run_cmd ${ns_c} ${ping} -q -M want -i 0.1 -c 20 -s $((${ll_mtu} + 500)) ${dst} || return 1
Signature · 1 line
Stefano
Aaron Conole
maintainerRe: [RFC net-next 6/7] selftests: net: Use the provided dpctl rather than the vswitchd for tests.
Hi Stefano,
Thanks for the review!
Quoted 10 lines · Stefano Brivio
Quoted 7 lines · On Thu, 13 Jun 2024 14:13:32 -0400 Aaron Conole <[email protected]> wrote:
The current pmtu test infrastucture requires an installed copy of the ovs-vswitchd userspace. This means that any automated or constrained environments may not have the requisite tools to run the tests. However, the pmtu tests don't require any special classifier processing. Indeed they are only using the vswitchd in the most basic mode - as a NORMAL switch.
Quoted 6 lines
Quoted 3 lines
However, the ovs-dpctl kernel utility can now program all the needed basic flows to allow traffic to traverse the tunnels and provide support for at least testing some basic pmtu scenarios.
I didn't know about that tool, that looks like a nice improvement. A few comments below (mostly nits):
It didn't at the time, so no worries :)
Quoted 40 lines
Quoted 21 lines
More complicated flow pipelines
can be added to the internal ovs test infrastructure, but that is work for the future. For now, enable the most common cases - wide mega flows with no other prerequisites.Signed-off-by Aaron Conole <[email protected]>--- tools/testing/selftests/net/pmtu.sh | 87 ++++++++++++++++++++++------- 1 file changed, 67 insertions(+), 20 deletions(-)tools/testing/selftests/net/pmtu.sh +1
-0@@ -846,22 +846,73 @@ setup_ovs_vxlan_or_geneve() { type="${1}" a_addr="${2}" b_addr="${3}" + dport="6081" if [ "${type}" = "vxlan" ]; thentools/testing/selftests/net/pmtu.sh setup_ovs_vxlan_or_geneve() { · line 857
Quoted 10 lines
tools/testing/selftests/net/pmtu.sh +2
-4+ dport="4789" opts="${opts} ttl 64 dstport 4789" opts_b="local ${b_addr}" fi - run_cmd ovs-vsctl add-port ovs_br0 ${type}_a -- \ - set interface ${type}_a type=${type} \ - options:remote_ip=${b_addr} options:key=1 options:csum=true || return 1 - + run_cmd python3 ./openvswitch/ovs-dpctl.py add-if ovs_br0 ${type}_a -t ${type}In some restricted environments, it might actually be more convenient to carry around ovs-vsctl than Python with (Python) libraries.
Nowadays I typically (albeit seldom) run kselftests in throw-away VM images made by mbuto (https://mbuto.sh/, see demo on the right), and while it copies python3 and dynamic libraries from the host, adding Python libraries such as pyroute2 gets quite complicated.
Quoted 4 lines
So I'm wondering, if it's not too messy: could we have two functions starting from approximately here (say,
setup_ovs_dpctl()andsetup_ovs_vsctl()), try with ovs-dpctl first, and, if that fails, fall back to ovs-vsctl?
It didn't seem to be too bad - so I went ahead and made that change. It tested well, so I'll resubmit it with that.
Quoted 34 lines
Quoted 11 lines
tools/testing/selftests/net/pmtu.sh +0
-0run_cmd ${ns_b} ip link add ${type}_b type ${type} id 1${opts_b} remote ${a_addr} ${opts} || return 1
tools/testing/selftests/net/pmtu.sh +4
-0run_cmd ${ns_b} ip addr add ${tunnel4_b_addr}/${tunnel4_mask} dev ${type}_b run_cmd ${ns_b} ip addr add ${tunnel6_b_addr}/${tunnel6_mask} dev ${type}_b + run_cmd ip link set ${type}_a up run_cmd ${ns_b} ip link set ${type}_b up + + ports=$(python3 ./openvswitch/ovs-dpctl.py show) + br0_port=$(echo "$ports" | grep -E "\sovs_br0" | sed -e 's@port @@' | cut -d: -f1 | xargs)tools/testing/selftests/net/pmtu.sh setup_ovs_vxlan_or_geneve() { · line 877
Quoted 10 lines
tools/testing/selftests/net/pmtu.sh +10
-0+ type_a_port=$(echo "$ports" | grep ${type}_a | sed -e 's@port @@' | cut -d: -f1 | xargs) + veth_a_port=$(echo "$ports" | grep veth_A | sed -e 's@port @@' | cut -d: -f1 | xargs) + + v4_a_tun="${prefix4}.${a_r1}.1" + v4_b_tun="${prefix4}.${b_r1}.1" + + v6_a_tun="${prefix6}:${a_r1}::1" + v6_b_tun="${prefix6}:${b_r1}::1" + + if [ "${v4_a_tun}" == "${a_addr}" ]; thenI see now that
05d92cb0e919("selftests/net: change shebang to bash to support "source"") turned this into a Bash script (for no real reason,lib.shcould have simply been sourced with '.' instead).Other than that, this happily runs with dash and possibly others, and:
$ checkbashisms -f pmtu.sh possible bashism in pmtu.sh line 201 (should be '.', not 'source'): source lib.sh possible bashism in pmtu.sh line 202 (should be '.', not 'source'): source net_helper.sh
Quoted 5 lines
Would it be possible to change this to POSIX shell:
if [ "${v4_a_tun}" = "${a_addr}" ]; theneven just for consistency with the rest of the file?
done.
Quoted 73 lines
Quoted 60 lines
tools/testing/selftests/net/pmtu.sh +40
-2+ run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \ + "recirc_id(0),in_port(${veth_a_port}),eth(),eth_type(0x0800),ipv4()" \ + "set(tunnel(tun_id=1,dst=${v4_b_tun},ttl=64,tp_dst=${dport},flags(df|csum))),${type_a_port}" + run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \ + "recirc_id(0),in_port(${veth_a_port}),eth(),eth_type(0x86dd),ipv6()" \ + "set(tunnel(tun_id=1,dst=${v4_b_tun},ttl=64,tp_dst=${dport},flags(df|csum))),${type_a_port}" + run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \ + "recirc_id(0),tunnel(tun_id=1,src=${v4_b_tun},dst=${v4_a_tun}),in_port(${type_a_port}),eth(),eth_type(0x0800),ipv4()" \ + "${veth_a_port}" + run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \ + "recirc_id(0),tunnel(tun_id=1,src=${v4_b_tun},dst=${v4_a_tun}),in_port(${type_a_port}),eth(),eth_type(0x86dd),ipv6()" \ + "${veth_a_port}" + run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \ + "recirc_id(0),tunnel(tun_id=1,src=${v4_b_tun},dst=${v4_a_tun}),in_port(${type_a_port}),eth(),eth_type(0x0806),arp()" \ + "${veth_a_port}" + run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \ + "recirc_id(0),in_port(${veth_a_port}),eth(),eth_type(0x0806),arp(sip=${veth4_c_addr},tip=${tunnel4_b_addr})" \ + "set(tunnel(tun_id=1,dst=${v4_b_tun},ttl=64,tp_dst=${dport},flags(df|csum))),${type_a_port}" + else + run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \ + "recirc_id(0),in_port(${veth_a_port}),eth(),eth_type(0x0800),ipv4()" \ + "set(tunnel(tun_id=1,ipv6_dst=${v6_b_tun},ttl=64,tp_dst=${dport},flags(df|csum))),${type_a_port}" + run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \ + "recirc_id(0),in_port(${veth_a_port}),eth(),eth_type(0x86dd),ipv6()" \ + "set(tunnel(tun_id=1,ipv6_dst=${v6_b_tun},ttl=64,tp_dst=${dport},flags(df|csum))),${type_a_port}" + run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \ + "recirc_id(0),tunnel(tun_id=1,ipv6_src=${v6_b_tun},ipv6_dst=${v6_a_tun}),in_port(${type_a_port}),eth(),eth_type(0x0800),ipv4()" \ + "${veth_a_port}" + run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \ + "recirc_id(0),tunnel(tun_id=1,ipv6_src=${v6_b_tun},ipv6_dst=${v6_a_tun}),in_port(${type_a_port}),eth(),eth_type(0x86dd),ipv6()" \ + "${veth_a_port}" + run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \ + "recirc_id(0),tunnel(tun_id=1,ipv6_src=${v6_b_tun},ipv6_dst=${v6_a_tun}),in_port(${type_a_port}),eth(),eth_type(0x0806),arp()" \ + "${veth_a_port}" + run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \ + "recirc_id(0),in_port(${veth_a_port}),eth(),eth_type(0x0806),arp(sip=${veth4_c_addr},tip=${tunnel4_b_addr})" \ + "set(tunnel(tun_id=1,ipv6_dst=${v6_b_tun},ttl=64,tp_dst=${dport},flags(df|csum))),${type_a_port}" + fi } setup_ovs_geneve4() {@@ -881,7 +932,7 @@ setup_ovs_vxlan6() { } setup_ovs_bridge() { - run_cmd ovs-vsctl add-br ovs_br0 || return $ksft_skip + run_cmd python3 ./openvswitch/ovs-dpctl.py add-dp ovs_br0 || return $ksft_skip run_cmd ip link set ovs_br0 up run_cmd ${ns_c} ip link add veth_C-A type veth peer name veth_A-C@@ -891,7 +942,7 @@ setup_ovs_bridge() { run_cmd ${ns_c} ip link set veth_C-A up run_cmd ${ns_c} ip addr add ${veth4_c_addr}/${veth4_mask} dev veth_C-A run_cmd ${ns_c} ip addr add ${veth6_c_addr}/${veth6_mask} dev veth_C-A - run_cmd ovs-vsctl add-port ovs_br0 veth_A-C + run_cmd python3 ./openvswitch/ovs-dpctl.py add-if ovs_br0 veth_A-C # Move veth_A-R1 to init run_cmd ${ns_a} ip link set veth_A-R1 netns 1tools/testing/selftests/net/pmtu.sh cleanup() { · line 999
Quoted 9 lines
tools/testing/selftests/net/pmtu.sh +4
-2@@ -942,8 +993,10 @@ cleanup() { ip link del veth_A-C 2>/dev/null ip link del veth_A-R1 2>/dev/null - ovs-vsctl --if-exists del-port vxlan_a 2>/dev/null - ovs-vsctl --if-exists del-br ovs_br0 2>/dev/null + # squelch the output of the del-if commands since it can be wordy + python3 ./openvswitch/ovs-dpctl.py del-if ovs_br0 -d true vxlan_a >/dev/null 2>&1 + python3 ./openvswitch/ovs-dpctl.py del-if ovs_br0 -d true geneve_a >/dev/null 2>&1 + python3 ./openvswitch/ovs-dpctl.py del-dp ovs_br0 >/dev/null 2>&1The idea behind those tabs before 2>/dev/null was to keep them aligned and make those redirections a bit easier on the eyes.
Quoted 2 lines
If you add more, you could keep those aligned as well -- or just decide that lines are too long and drop the tabs altogether.
Yeah, looks like I missed the /dev/null tabs but those were supposed to be lined up. Anyway, I rewrote this part so that it looks better (I think).
Quoted 35 lines
Quoted 35 lines
tools/testing/selftests/net/pmtu.sh +6
-12rm -f "$tmpoutfile" }@@ -1407,16 +1460,10 @@ test_pmtu_ipvX_over_ovs_vxlanY_or_geneveY_exception() { exp_mtu=$((${ll_mtu} - 40 - 8 - 8 - 14)) fi - if [ "${type}" = "vxlan" ]; then - tun_a="vxlan_sys_4789" - elif [ "${type}" = "geneve" ]; then - tun_a="genev_sys_6081" - fi - - trace "" "${tun_a}" "${ns_b}" ${type}_b \ - "" veth_A-R1 "${ns_r1}" veth_R1-A \ - "${ns_b}" veth_B-R1 "${ns_r1}" veth_R1-B \ - "" ovs_br0 "" veth-A-C \ + trace "" "${type}_a" "${ns_b}" ${type}_b \ + "" veth_A-R1 "${ns_r1}" veth_R1-A \ + "${ns_b}" veth_B-R1 "${ns_r1}" veth_R1-B \ + "" ovs_br0 "" veth-A_C \ "${ns_c}" veth_C-A if [ ${family} -eq 4 ]; then@@ -1436,8 +1483,8 @@ test_pmtu_ipvX_over_ovs_vxlanY_or_geneveY_exception() { mtu "${ns_b}" veth_B-R1 ${ll_mtu} mtu "${ns_r1}" veth_R1-B ${ll_mtu} - mtu "" ${tun_a} $((${ll_mtu} + 1000)) - mtu "${ns_b}" ${type}_b $((${ll_mtu} + 1000)) + mtu "" ${type}_a $((${ll_mtu} + 1000)) + mtu "${ns_b}" ${type}_b $((${ll_mtu} + 1000)) run_cmd ${ns_c} ${ping} -q -M want -i 0.1 -c 20 -s $((${ll_mtu} + 500)) ${dst} || return 1
Aaron Conole
maintainerRFC 7/7 selftests: net: add config for openvswitch
In reply to Aaron ConoleThe pmtu testing will require that the OVS module is installed, so do that.
--- tools/testing/selftests/net/config | 5 +++++ 1 file changed, 5 insertions(+)
tools/testing/selftests/net/config +5 -0
@@ -101,3 +101,8 @@ CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_CRYPTO_ARIA=y CONFIG_XFRM_INTERFACE=m CONFIG_XFRM_USER=m +CONFIG_OPENVSWITCH=m +CONFIG_OPENVSWITCH_GRE=m +CONFIG_OPENVSWITCH_VXLAN=m +CONFIG_OPENVSWITCH_GENEVE=m +CONFIG_NF_CONNTRACK_OVS=y
Signature · 1 line
2.45.1
Re: [ovs-dev] [RFC net-next 7/7] selftests: net: add config for openvswitch
Quoted 4 lines · Aaron Conole
The pmtu testing will require that the OVS module is installed, so do that.
Signed-off-by Aaron Conole <[email protected]>