arm64: dts: rockchip: disable USB3 host port on ROCK 5B
Subsystems (2)
RFC 1/2 arm64: dts: rockchip: disable USB3 host port on ROCK 5B
USB3 host (upper) port on ROCK 5B is not working with USB3 devices.
error message:
usb usb6-port1: Cannot enable. Maybe the USB cable is bad? usb usb6-port1: Cannot enable. Maybe the USB cable is bad? usb usb6-port1: Cannot enable. Maybe the USB cable is bad?
:
$ lsusb -t
/: Bus 001.Port 001: Dev 001, Class=root_hub, Driver=ehci-platform/1p, 480M
|__ Port 001: Dev 002, If 0, Class=Hub, Driver=hub/4p, 480M
|__ Port 001: Dev 003, If 0, Class=Mass Storage, Driver=usb-storage, 480M
/: Bus 002.Port 001: Dev 001, Class=root_hub, Driver=ohci-platform/1p, 12M
/: Bus 003.Port 001: Dev 001, Class=root_hub, Driver=ehci-platform/1p, 480M
/: Bus 004.Port 001: Dev 001, Class=root_hub, Driver=ohci-platform/1p, 12M
/: Bus 005.Port 001: Dev 001, Class=root_hub, Driver=xhci-hcd/1p, 480M
/: Bus 006.Port 001: Dev 001, Class=root_hub, Driver=xhci-hcd/1p, 5000M
/: Bus 007.Port 001: Dev 001, Class=root_hub, Driver=xhci-hcd/1p, 480M
/: Bus 008.Port 001: Dev 001, Class=root_hub, Driver=xhci-hcd/1p, 5000M--- arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts | 4 ---- 1 file changed, 4 deletions(-)
arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts +0 -4
@@ -805,7 +805,3 @@ &usb_host1_xhci { dr_mode = "host"; status = "okay"; }; - -&usb_host2_xhci { - status = "okay"; -};
Signature · 7 lines
2.43.0 _______________________________________________ Linux-rockchip mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-rockchip
RFC 2/2 arm64: dts: rockchip: disable USB3 host port on ROCK 5A
USB3 host (lower) port on ROCK 5A is not working with USB3 devices.
error message:
usb usb6-port1: Cannot enable. Maybe the USB cable is bad? usb usb6-port1: Cannot enable. Maybe the USB cable is bad? usb usb6-port1: Cannot enable. Maybe the USB cable is bad?
:
$ lsusb -t
/: Bus 001.Port 001: Dev 001, Class=root_hub, Driver=ehci-platform/1p, 480M
|__ Port 001: Dev 002, If 0, Class=Hub, Driver=hub/4p, 480M
|__ Port 002: Dev 003, If 0, Class=Mass Storage, Driver=usb-storage, 480M
/: Bus 002.Port 001: Dev 001, Class=root_hub, Driver=ohci-platform/1p, 12M
/: Bus 003.Port 001: Dev 001, Class=root_hub, Driver=ehci-platform/1p, 480M
/: Bus 004.Port 001: Dev 001, Class=root_hub, Driver=ohci-platform/1p, 12M
/: Bus 005.Port 001: Dev 001, Class=root_hub, Driver=xhci-hcd/1p, 480M
/: Bus 006.Port 001: Dev 001, Class=root_hub, Driver=xhci-hcd/1p, 5000M
/: Bus 007.Port 001: Dev 001, Class=root_hub, Driver=xhci-hcd/1p, 480M
/: Bus 008.Port 001: Dev 001, Class=root_hub, Driver=xhci-hcd/1p, 5000M--- arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts | 4 ---- 1 file changed, 4 deletions(-)
arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts +0 -4
@@ -755,7 +755,3 @@ &usb_host1_ehci { &usb_host1_ohci { status = "okay"; }; - -&usb_host2_xhci { - status = "okay"; -};
Signature · 7 lines
2.43.0 _______________________________________________ Linux-rockchip mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-rockchip
Hi,
Quoted 20 lines · FUKAUMI Naoki
USB3 host (upper) port on ROCK 5B is not working with USB3 devices.
error message:
usb usb6-port1: Cannot enable. Maybe the USB cable is bad? usb usb6-port1: Cannot enable. Maybe the USB cable is bad? usb usb6-port1: Cannot enable. Maybe the USB cable is bad?
:$ lsusb -t /: Bus 001.Port 001: Dev 001, Class=root_hub, Driver=ehci-platform/1p, 480M |__ Port 001: Dev 002, If 0, Class=Hub, Driver=hub/4p, 480M |__ Port 001: Dev 003, If 0, Class=Mass Storage, Driver=usb-storage, 480M /: Bus 002.Port 001: Dev 001, Class=root_hub, Driver=ohci-platform/1p, 12M /: Bus 003.Port 001: Dev 001, Class=root_hub, Driver=ehci-platform/1p, 480M /: Bus 004.Port 001: Dev 001, Class=root_hub, Driver=ohci-platform/1p, 12M /: Bus 005.Port 001: Dev 001, Class=root_hub, Driver=xhci-hcd/1p, 480M /: Bus 006.Port 001: Dev 001, Class=root_hub, Driver=xhci-hcd/1p, 5000M /: Bus 007.Port 001: Dev 001, Class=root_hub, Driver=xhci-hcd/1p, 480M /: Bus 008.Port 001: Dev 001, Class=root_hub, Driver=xhci-hcd/1p, 5000M
Quoted 3 lines
Fixes f97d78b9f6cf ("arm64: dts: rockchip: add USB3 host to rock-5b")Signed-off-by FUKAUMI Naoki <[email protected]>---
I plugged a USB dongle into the upper and the lower USB3 port of Rock 5B and they both work fine for me:
after plugging into lower USB3:
kernel: usb 4-1: new SuperSpeed USB device number 2 using xhci-hcd
kernel: usb-storage 4-1:1.0: USB Mass Storage device detected
kernel: scsi host0: usb-storage 4-1:1.0
kernel: scsi 0:0:0:0: Direct-Access Intenso Speed Line 8.01 PQ: 0 ANSI: 6
kernel: sd 0:0:0:0: [sda] 122060800 512-byte logical blocks: (62.5 GB/58.2 GiB)
kernel: sd 0:0:0:0: [sda] Write Protect is off
kernel: sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
kernel: sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
kernel: GPT:Primary header thinks Alt. header is not at the end of the disk.
kernel: GPT:15124999 != 122060799
kernel: GPT:Alternate GPT header not at the end of the disk.
kernel: GPT:15124999 != 122060799
kernel: GPT: Use GNU Parted to correct GPT errors.
kernel: sda: sda1 sda2 sda3 sda4 sda5
kernel: sd 0:0:0:0: [sda] Attached SCSI removable disk
kernel: usb 4-1: USB disconnect, device number 2
after plugging into upper USB3:
kernel: usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd
kernel: usb-storage 2-1:1.0: USB Mass Storage device detected
kernel: scsi host0: usb-storage 2-1:1.0
kernel: scsi 0:0:0:0: Direct-Access Intenso Speed Line 8.01 PQ: 0 ANSI: 6
kernel: sd 0:0:0:0: [sda] 122060800 512-byte logical blocks: (62.5 GB/58.2 GiB)
kernel: sd 0:0:0:0: [sda] Write Protect is off
kernel: sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
kernel: sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
kernel: GPT:Primary header thinks Alt. header is not at the end of the disk.
kernel: GPT:15124999 != 122060799
kernel: GPT:Alternate GPT header not at the end of the disk.
kernel: GPT:15124999 != 122060799
kernel: GPT: Use GNU Parted to correct GPT errors.
kernel: sda: sda1 sda2 sda3 sda4 sda5
kernel: sd 0:0:0:0: [sda] Attached SCSI removable disk
-- Sebastian
Quoted 18 lines
arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts | 4 ---- 1 file changed, 4 deletions(-)arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts +0
-4@@ -805,7 +805,3 @@ &usb_host1_xhci { dr_mode = "host"; status = "okay"; }; - -&usb_host2_xhci { - status = "okay"; -};Signature · 1 line
2.43.0
_______________________________________________
Linux-rockchip mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-rockchip