arm: mach-k3: j784s4: Fix MCU_CLKOUT0 parent clock mux
Subsystems (2)
PATCH 1/1 arm: mach-k3: j784s4: Fix MCU_CLKOUT0 parent clock mux
From: Emanuele Ghidoli <[email protected]>
MCU_CLKOUT0 output can be driven by two different clock inputs:
one at 25 MHz and another at 50 MHz. Currently, the 25 MHz input clock is not selectable due to a duplication of the 50 MHz clock input in the mux configuration. This commit corrects the parent clock mux configuration, making the 25 MHz input clock selectable.
--- arch/arm/mach-k3/r5/j784s4/clk-data.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm/mach-k3/r5/j784s4/clk-data.c +2 -2
@@ -134,7 +134,7 @@ static const char * const emmcsd1_lb_clksel_out0_parents[] = {static const char *const mcu_clkout_mux_out0_parents[] = {"hsdiv4_16fft_mcu_2_hsdivout0_clk" , -"hsdiv4_16fft_mcu_2_hsdivout0_clk" , +"hsdiv4_16fft_mcu_2_hsdivout1_clk" , };static const char *const k3_pll_ctrl_wrap_main_0_sysclkout_clk_parents[] = {
@@ -338,7 +338,7 @@ static const struct dev_clk soc_dev_clk_data[] = {DEV_CLK (149 ,5 ,"k3_pll_ctrl_wrap_wkup_0_chip_div1_clk_clk" ),DEV_CLK (157 ,174 ,"mcu_clkout_mux_out0" ),DEV_CLK (157 ,175 ,"hsdiv4_16fft_mcu_2_hsdivout0_clk" ), -DEV_CLK (157 ,176 ,"hsdiv4_16fft_mcu_2_hsdivout0_clk" ), +DEV_CLK (157 ,176 ,"hsdiv4_16fft_mcu_2_hsdivout1_clk" ),DEV_CLK (157 ,179 ,"fss_mcu_0_hyperbus1p0_0_hpb_out_clk_p" ),DEV_CLK (157 ,180 ,"fss_mcu_0_hyperbus1p0_0_hpb_out_clk_n" ), DEV_CLK(157, 224, "fss_mcu_0_ospi_0_ospi_oclk_clk"),
Signature · 1 line
2.34.1
On June 17, 2024 thus sayeth Emanuele Ghidoli:
Quoted 8 lines
From: Emanuele Ghidoli <[email protected]>
MCU_CLKOUT0output can be driven by two different clock inputs:
one at 25 MHz and another at 50 MHz. Currently, the 25 MHz input clock is not selectable due to a duplication of the 50 MHz clock input in the mux configuration. This commit corrects the parent clock mux configuration, making the 25 MHz input clock selectable.
Quoted 5 lines
Signed-off-by Emanuele Ghidoli <[email protected]>--- arch/arm/mach-k3/r5/j784s4/clk-data.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
Nice catch!
~Bryan
Quoted 25 lines
arch/arm/mach-k3/r5/j784s4/clk-data.c +2
-2@@ -134,7 +134,7 @@ static const char * const emmcsd1_lb_clksel_out0_parents[] = {static const char *const mcu_clkout_mux_out0_parents[] = {"hsdiv4_16fft_mcu_2_hsdivout0_clk" , -"hsdiv4_16fft_mcu_2_hsdivout0_clk" , +"hsdiv4_16fft_mcu_2_hsdivout1_clk" , };static const char *const k3_pll_ctrl_wrap_main_0_sysclkout_clk_parents[] = {@@ -338,7 +338,7 @@ static const struct dev_clk soc_dev_clk_data[] = {DEV_CLK (149 ,5 ,"k3_pll_ctrl_wrap_wkup_0_chip_div1_clk_clk" ),DEV_CLK (157 ,174 ,"mcu_clkout_mux_out0" ),DEV_CLK (157 ,175 ,"hsdiv4_16fft_mcu_2_hsdivout0_clk" ), -DEV_CLK (157 ,176 ,"hsdiv4_16fft_mcu_2_hsdivout0_clk" ), +DEV_CLK (157 ,176 ,"hsdiv4_16fft_mcu_2_hsdivout1_clk" ),DEV_CLK (157 ,179 ,"fss_mcu_0_hyperbus1p0_0_hpb_out_clk_p" ),DEV_CLK (157 ,180 ,"fss_mcu_0_hyperbus1p0_0_hpb_out_clk_n" ), DEV_CLK(157, 224, "fss_mcu_0_ospi_0_ospi_oclk_clk"),Signature · 1 line
2.34.1
Quoted 8 lines · Emanuele Ghidoli
MCU_CLKOUT0output can be driven by two different clock inputs:
one at 25 MHz and another at 50 MHz. Currently, the 25 MHz input clock is not selectable due to a duplication of the 50 MHz clock input in the mux configuration. This commit corrects the parent clock mux configuration, making the 25 MHz input clock selectable.[...]
Applied to u-boot/next, thanks!
Signature · 1 line
Tom