hw/acpi: Fix big endian host creation of Generic Port Affinity Structures
PATCH 1/1 hw/acpi: Fix big endian host creation of Generic Port Affinity Structures
Treating the HID as an integer caused it to get bit reversed on big endian hosts running little endian guests. Treat it as a character array instead.
Fixes hw/acpi: Generic Port Affinity Structure Support
---
Richard ran the version posted in the thread on an s390 instance. Thanks for the help!
Difference from version in thread:
- Instantiate i in the for loop.
Sending out now so Michael can decide whether to fold this in, or drop the GP series for now from his pull request (in which case I'll do an updated version with this and Markus' docs feedback folded in.)
--- include/hw/acpi/acpi_generic_initiator.h | 2 +- hw/acpi/acpi_generic_initiator.c | 4 +++- 2 files changed, 4 insertions(+), 2 deletions(-)
include/hw/acpi/acpi_generic_initiator.h +1 -1
@@ -61,7 +61,7 @@ typedef struct PCIDeviceHandle {uint16_t bdf; };struct { -uint64_t hid; +char hid[8 ];uint32_t uid; }; };
hw/acpi/acpi_generic_initiator.c +3 -1
@@ -151,7 +151,9 @@ build_srat_generic_node_affinity(GArray *table_data, int node,build_append_int_noprefix (table_data,0 ,12 ); }else {/* Device Handle - ACPI */ -build_append_int_noprefix (table_data, handle->hid,8 ); +for (int i =0 ; i <sizeof (handle->hid); i++) { +build_append_int_noprefix (table_data, handle->hid[i],1 ); + }build_append_int_noprefix (table_data, handle->uid,4 );build_append_int_noprefix (table_data,0 ,4 ); }
Signature · 1 line
2.39.2
Quoted 12 lines · Jonathan Cameron
Treating the HID as an integer caused it to get bit reversed on big endian hosts running little endian guests. Treat it as a character array instead.
Fixes hw/acpi: Generic Port Affinity Structure Support
Tested-by Richard Henderson <[email protected]>Signed-off-by Jonathan Cameron <[email protected]>---
Richard ran the version posted in the thread on an s390 instance. Thanks for the help!
Quoted 7 lines
Difference from version in thread:
- Instantiate i in the for loop.Sending out now so Michael can decide whether to fold this in, or drop the GP series for now from his pull request (in which case I'll do an updated version with this and Markus' docs feedback folded in.)
Dropped for now.
Quoted 10 lines
--- include/hw/acpi/acpi_generic_initiator.h | 2 +- hw/acpi/acpi_generic_initiator.c | 4 +++- 2 files changed, 4 insertions(+), 2 deletions(-)include/hw/acpi/acpi_generic_initiator.h +0
-0
include/hw/acpi/acpi_generic_initiator.h typedef struct PCIDeviceHandle { · line 67
Quoted 8 lines
include/hw/acpi/acpi_generic_initiator.h +1
-1@@ -61,7 +61,7 @@ typedef struct PCIDeviceHandle {uint16_t bdf; };struct { -uint64_t hid; +char hid[8 ];uint32_t uid; }; };
I think there is another issue:
+ memcpy(&dev_handle.hid, hid, sizeof(dev_handle.hid));
not nice since there is no check that 8 will hold all of
+ const char *hid = "ACPI0016";
and won't access buffer out of range.
Quoted 17 lines
hw/acpi/acpi_generic_initiator.c +3
-1@@ -151,7 +151,9 @@ build_srat_generic_node_affinity(GArray *table_data, int node,build_append_int_noprefix (table_data,0 ,12 ); }else {/* Device Handle - ACPI */ -build_append_int_noprefix (table_data, handle->hid,8 ); +for (int i =0 ; i <sizeof (handle->hid); i++) { +build_append_int_noprefix (table_data, handle->hid[i],1 ); + }build_append_int_noprefix (table_data, handle->uid,4 );build_append_int_noprefix (table_data,0 ,4 ); }Signature · 1 line
2.39.2
Quoted 46 lines · On Wed, 5 Jun 2024 19:38:18 -0400 "Michael S. Tsirkin" <[email protected]> wrote:
Quoted 12 lines · Jonathan Cameron
Treating the HID as an integer caused it to get bit reversed on big endian hosts running little endian guests. Treat it as a character array instead.
Fixes hw/acpi: Generic Port Affinity Structure Support
Tested-by Richard Henderson <[email protected]>Signed-off-by Jonathan Cameron <[email protected]>---
Richard ran the version posted in the thread on an s390 instance. Thanks for the help!Quoted 7 lines
Difference from version in thread:
- Instantiate i in the for loop.Sending out now so Michael can decide whether to fold this in, or drop the GP series for now from his pull request (in which case I'll do an updated version with this and Markus' docs feedback folded in.)
Dropped for now.
Quoted 10 lines
--- include/hw/acpi/acpi_generic_initiator.h | 2 +- hw/acpi/acpi_generic_initiator.c | 4 +++- 2 files changed, 4 insertions(+), 2 deletions(-)include/hw/acpi/acpi_generic_initiator.h +0
-0include/hw/acpi/acpi_generic_initiator.h typedef struct PCIDeviceHandle { · line 67
Quoted 8 lines
include/hw/acpi/acpi_generic_initiator.h +1
-1@@ -61,7 +61,7 @@ typedef struct PCIDeviceHandle {uint16_t bdf; };struct { -uint64_t hid; +char hid[8 ];uint32_t uid; }; };I think there is another issue:
Quoted 6 lines
+
memcpy(&dev_handle.hid, hid, sizeof(dev_handle.hid));not nice since there is no check that 8 will hold all of
+ const char *hid = "ACPI0016";
and won't access buffer out of range.
I think, in theory, that won't ever happen unless someone is using an invalid ACPI ID as they 'must' be 8 chars (or a uint64_t which would also be fine). A bit of defensive programming seems sensible though as there are known buggy real firmware's that have invalid IDs so maybe one day someone will add one of those to QEMU when we aren't paying attention.
I'll add a sanity check and treat such a value as an error. It'll also act as documentation of the requirement.
if (strlen(hid) != sizeof(dev_handle.hid)) {
error_printf("ACPI ID for generic port is not the expected 8 characters");
exit(-1);
}Quoted 22 lines
Quoted 20 lines
hw/acpi/acpi_generic_initiator.c +3
-1@@ -151,7 +151,9 @@ build_srat_generic_node_affinity(GArray *table_data, int node,build_append_int_noprefix (table_data,0 ,12 ); }else {/* Device Handle - ACPI */ -build_append_int_noprefix (table_data, handle->hid,8 ); +for (int i =0 ; i <sizeof (handle->hid); i++) { +build_append_int_noprefix (table_data, handle->hid[i],1 ); + }build_append_int_noprefix (table_data, handle->uid,4 );build_append_int_noprefix (table_data,0 ,4 ); }Signature · 1 line
2.39.2
Quoted 30 lines · On Wed, 5 Jun 2024 19:04:55 +0100 Jonathan Cameron…
Treating the HID as an integer caused it to get bit reversed on big endian hosts running little endian guests. Treat it as a character array instead.
Fixes hw/acpi: Generic Port Affinity Structure Support
Tested-by Richard Henderson <[email protected]>Signed-off-by Jonathan Cameron <[email protected]>---
Richard ran the version posted in the thread on an s390 instance. Thanks for the help!Difference from version in thread:
- Instantiate i in the for loop.Sending out now so Michael can decide whether to fold this in, or drop the GP series for now from his pull request (in which case I'll do an updated version with this and Markus' docs feedback folded in.)
--- include/hw/acpi/acpi_generic_initiator.h | 2 +- hw/acpi/acpi_generic_initiator.c | 4 +++- 2 files changed, 4 insertions(+), 2 deletions(-)include/hw/acpi/acpi_generic_initiator.h +0
-0
include/hw/acpi/acpi_generic_initiator.h typedef struct PCIDeviceHandle { · line 67
Quoted 8 lines
include/hw/acpi/acpi_generic_initiator.h +1
-1@@ -61,7 +61,7 @@ typedef struct PCIDeviceHandle {uint16_t bdf; };struct { -uint64_t hid; +char hid[8 ];uint32_t uid; }; };
not sure on top of what this patch applies but I have some generic comments wrt it
why PCIDeviceHandle is in header file? is there plan for it being used outside of acpi_generic_initiator.c?
Quoted 5 lines
hw/acpi/acpi_generic_initiator.c +0
-0
hw/acpi/acpi_generic_initiator.c build_srat_generic_node_affinity(GArray *table_data, int node, · line 158
Quoted 9 lines
hw/acpi/acpi_generic_initiator.c +3
-1@@ -151,7 +151,9 @@ build_srat_generic_node_affinity(GArray *table_data, int node,build_append_int_noprefix (table_data,0 ,12 ); }else {/* Device Handle - ACPI */ -build_append_int_noprefix (table_data, handle->hid,8 ); +for (int i =0 ; i <sizeof (handle->hid); i++) { +build_append_int_noprefix (table_data, handle->hid[i],1 ); + }build_append_int_noprefix (table_data, handle->uid,4 );build_append_int_noprefix (table_data,0 ,4 );
instead of open codding structure
it might be better to introduce helper in aml_build.c
something like
/* proper reference to spec as we do for other ACPI primitives */ build_append_srat_acpi_device_handle(GArray *table_data, char* hid, unit32_t uid)
assert(strlen(hid) ...
for() {
build_append_byte()
}
...the same applies to "Device Handle - PCI" structure
Also get rid of PCI deps in acpi_generic_initiator.c
move build_all_acpi_generic_initiators/build_srat_generic_pci_initiator into hw/acpi/pci.c file if it has to access PCI code/structures directly (which I'm not convinced it should, can we get/expose what it needs as QOM properties?)
btw:build_all_acpi_generic_initiators() name doesn't match what it's doing. it composes only one initiator entry.
Quoted 1 line
hw/acpi/acpi_generic_initiator.c +0
-0}
Quoted 28 lines · On Thu, 6 Jun 2024 16:06:53 +0200 Igor Mammedov <[email protected]> wrote:
Quoted 25 lines · On Wed, 5 Jun 2024 19:04:55 +0100 Jonathan Cameron…
Treating the HID as an integer caused it to get bit reversed on big endian hosts running little endian guests. Treat it as a character array instead.
Fixes hw/acpi: Generic Port Affinity Structure Support
Tested-by Richard Henderson <[email protected]>Signed-off-by Jonathan Cameron <[email protected]>---
Richard ran the version posted in the thread on an s390 instance. Thanks for the help!Difference from version in thread:
- Instantiate i in the for loop.Sending out now so Michael can decide whether to fold this in, or drop the GP series for now from his pull request (in which case I'll do an updated version with this and Markus' docs feedback folded in.)
--- include/hw/acpi/acpi_generic_initiator.h | 2 +- hw/acpi/acpi_generic_initiator.c | 4 +++- 2 files changed, 4 insertions(+), 2 deletions(-)
Quoted 15 lines
include/hw/acpi/acpi_generic_initiator.h typedef struct PCIDeviceHandle { · line 67
Quoted 13 lines
include/hw/acpi/acpi_generic_initiator.h +1
-1@@ -61,7 +61,7 @@ typedef struct PCIDeviceHandle {uint16_t bdf; };struct { -uint64_t hid; +char hid[8 ];uint32_t uid; }; };not sure on top of what this patch applies but I have some generic comments wrt it
https://lore.kernel.org/qemu-devel/[email protected]/
Comments are all on elements of the existing upstream code, but I'm touching it anyway so will look at making the improvements you suggest as new precursors to v3 given we are going around again anyway.
Quoted 3 lines
why PCIDeviceHandle is in header file? is there plan for it being used outside of
acpi_generic_initiator.c?
I'll add a precursor patch to my series that moves
it and anything else that should be more local. May well move to being local in aml_build.c given your later comments with the various fields passed in as parameters.
Quoted 23 lines
Quoted 7 lines
hw/acpi/acpi_generic_initiator.c +0
-0hw/acpi/acpi_generic_initiator.c build_srat_generic_node_affinity(GArray *table_data, int node, · line 158
Quoted 9 lines
hw/acpi/acpi_generic_initiator.c +3
-1@@ -151,7 +151,9 @@ build_srat_generic_node_affinity(GArray *table_data, int node,build_append_int_noprefix (table_data,0 ,12 ); }else {/* Device Handle - ACPI */ -build_append_int_noprefix (table_data, handle->hid,8 ); +for (int i =0 ; i <sizeof (handle->hid); i++) { +build_append_int_noprefix (table_data, handle->hid[i],1 ); + }build_append_int_noprefix (table_data, handle->uid,4 );build_append_int_noprefix (table_data,0 ,4 );instead of open codding structure
it might be better to introduce helper in
aml_build.c
something like
/* proper reference to spec as we do for other ACPI primitives */build_append_srat_acpi_device_handle(GArray *table_data, char* hid, unit32_t uid)
Quoted 7 lines
assert(strlen(hid) ... for() { build_append_byte() } ...the same applies to "Device Handle - PCI" structure
I'll look at moving that stuff and the affinity structure creation code themselves in there. I think they ended up in this file because of the other infrastructure needed to create these nodes and it will have felt natural to keep this together.
Putting it in aml_build.c will put it with similar code though which makes sense to me.
Quoted 4 lines
Also get rid of PCI deps in
acpi_generic_initiator.c
move build_all_acpi_generic_initiators/build_srat_generic_pci_initiator intohw/acpi/pci.c
Today it's used only for PCI devices, but that's partly an artifact of how we get to the root complex via the bus below it.
Spec wise, it's just as applicable to platform devices etc, but maybe we can move it to pci.c for now and move it out again if it gains other users. Or leave it in acpi_generic_initiator.c but have all the aml stuff in aml_build.c as you suggest.
Quoted 2 lines
file if it has to access PCI code/structures directly
(which I'm not convinced it should, can we get/expose what it needs as QOM properties?)
Maybe. I'll see what I can come up with. This feels involved however so I'm more doubtful about this as a precursor.
Quoted 4 lines
btw:
build_all_acpi_generic_initiators()name doesn't match what it's doing. it composes only one initiator entry.
I'll look at tidying up all the relevant naming.
Jonathan
Quoted 4 lines
Quoted 2 lines
hw/acpi/acpi_generic_initiator.c +0
-0}
Hi Igor,
Some code snippets below to try and see if I'm on the correct track for what you had in mind.
Quoted 30 lines
Quoted 22 lines
Quoted 6 lines
hw/acpi/acpi_generic_initiator.c +0
-0hw/acpi/acpi_generic_initiator.c build_srat_generic_node_affinity(GArray *table_data, int node, · line 158
Quoted 9 lines
hw/acpi/acpi_generic_initiator.c +3
-1@@ -151,7 +151,9 @@ build_srat_generic_node_affinity(GArray *table_data, int node,build_append_int_noprefix (table_data,0 ,12 ); }else {/* Device Handle - ACPI */ -build_append_int_noprefix (table_data, handle->hid,8 ); +for (int i =0 ; i <sizeof (handle->hid); i++) { +build_append_int_noprefix (table_data, handle->hid[i],1 ); + }build_append_int_noprefix (table_data, handle->uid,4 );build_append_int_noprefix (table_data,0 ,4 );instead of open codding structure
it might be better to introduce helper in
aml_build.c
something like
/* proper reference to spec as we do for other ACPI primitives */build_append_srat_acpi_device_handle(GArray *table_data, char* hid, unit32_t uid)Quoted 7 lines
assert(strlen(hid) ... for() { build_append_byte() } ...the same applies to "Device Handle - PCI" structure
Quoted 7 lines
I'll look at moving that stuff and the affinity structure creation code themselves in there. I think they ended up in this file because of the other infrastructure needed to create these nodes and it will have felt natural to keep this together.
Putting it in
aml_build.cwill put it with similar code though which makes sense to me.
This all works out fine, though there is less reason to keep a ACPI_GENERIC_NODE base under GENERIC_PORT and GENERIC_INITIATOR so I may drop that and just have a small amount of code duplication.
Quoted 14 lines
Quoted 5 lines
Also get rid of PCI deps in
acpi_generic_initiator.c
move build_all_acpi_generic_initiators/build_srat_generic_pci_initiator intohw/acpi/pci.cToday it's used only for PCI devices, but that's partly an artifact of how we get to the root complex via the bus below it.
Spec wise, it's just as applicable to platform devices etc, but maybe we can move it to
pci.cfor now and move it out again if it gains other users. Or leave it inacpi_generic_initiator.cbut have all the aml stuff inaml_build.cas you suggest.
Quoted 5 lines
Quoted 2 lines
file if it has to access PCI code/structures directly
(which I'm not convinced it should, can we get/expose what it needs as QOM properties?)Maybe. I'll see what I can come up with. This feels involved however so I'm more doubtful about this as a precursor.
This is a little messy and tricky to get the right level of generic. For the bdf, were you thinking something along the lines of the following?
hw/pci/pci.c +14 -0
@@ -67,6 +67,19 @@ static char *pcibus_get_fw_dev_path(DeviceState *dev);static void pcibus_reset_hold (Object *obj,ResetType type);static bool pcie_has_upstream_port (PCIDevice *dev); +static void prop_pci_bdf_get (Object *obj,Visitor *v,const char *name, +void *opaque,Error **errp) +{ +uint16_t bdf =pci_get_bdf (PCI_DEVICE (obj)); + +visit_type_uint16 (v, name, &bdf, errp); +} + +static const PropertyInfo prop_pci_bdf = { + .name ="bdf" , + .get = prop_pci_bdf_get, +}; +static Property pci_props[] = {DEFINE_PROP_PCI_DEVFN ("addr" , PCIDevice, devfn,-1 ),DEFINE_PROP_STRING ("romfile" , PCIDevice, romfile),
@@ -85,6 +98,7 @@ static Property pci_props[] = { QEMU_PCIE_ERR_UNC_MASK_BITNR, true),DEFINE_PROP_BIT ("x-pcie-ari-nextfn-1" , PCIDevice, cap_present,QEMU_PCIE_ARI_NEXTFN_1_BITNR , false), + { .name = "bdf", .info = &prop_pci_bdf }, DEFINE_PROP_END_OF_LIST() };
The other case is where I need to get the ACPI UID associate with a root complex. Now that has to be matched to the appropriate HID and so far the only one of those is ACPI0016 which is the HID for TYPE_PXB_CXL_DEV. That happens to the bus number of the TYPE_PXB_CXL_BUS but that connection should probably not be explicit outside of the PXB specific code.
I can add a property like:
hw/pci-bridge/pci_expander_bridge.c +16 -1
@@ -92,6 +92,21 @@ static void pxb_bus_class_init(ObjectClass *class, void *data) pbc->numa_node = pxb_bus_numa_node; } +static void prop_pxb_cxl_uid_get (Object *obj,Visitor *v,const char *name, +void *opaque,Error **errp) +{ +uint32_t uid =pci_bus_num (PCI_BUS (obj)); + +visit_type_uint32 (v, name, &uid, errp); +} + +static void pxb_cxl_bus_class_init (ObjectClass *class,void *data) +{ +pxb_bus_class_init (class, data); +object_class_property_add (class,"acpi_uid" ,"uint32" , + prop_pxb_cxl_uid_get,NULL ,NULL ,NULL ); +} +static const TypeInfo pxb_bus_info = { .name =TYPE_PXB_BUS , .parent =TYPE_PCI_BUS ,
@@ -110,7 +125,7 @@ static const TypeInfo pxb_cxl_bus_info = { .name = TYPE_PXB_CXL_BUS, .parent = TYPE_CXL_BUS, .instance_size = sizeof(PXBBus), - .class_init = pxb_bus_class_init, + .class_init = pxb_cxl_bus_class_init, }; static const char *pxb_host_root_bus_path(PCIHostState *host_bridge,
and query it when setting up the generic port with
const char *hid = "ACPI0016";
uint32_t uid;
if (gn->node >= ms->numa_state->num_nodes) {
error_printf("%s: node %d is invalid.\n",
TYPE_ACPI_GENERIC_PORT, gn->node);
exit(1);
}
o = object_resolve_path_type(gn->pci_dev, TYPE_PXB_CXL_BUS, NULL);
if (!o) {
error_printf("%s: device must be a CXL host bridge.\n",
TYPE_ACPI_GENERIC_PORT);
exit(1);
}
uid = object_property_get_uint(o, "acpi_uid", &error_fatal);
build_srat_acpi_generic_port(table_data, gn->node, hid, uid);
return 0;Thanks,
Jonathan
Quoted 17 lines
Quoted 5 lines
btw:
build_all_acpi_generic_initiators()name doesn't match what it's doing. it composes only one initiator entry.I'll look at tidying up all the relevant naming.
Jonathan
Quoted 4 lines
Quoted 2 lines
hw/acpi/acpi_generic_initiator.c +0
-0}
Quoted 93 lines · On Thu, 6 Jun 2024 18:47:16 +0100 Jonathan Cameron…
Quoted 28 lines · On Thu, 6 Jun 2024 16:06:53 +0200 Igor Mammedov <[email protected]> wrote:
Quoted 25 lines · On Wed, 5 Jun 2024 19:04:55 +0100 Jonathan Cameron…
Treating the HID as an integer caused it to get bit reversed on big endian hosts running little endian guests. Treat it as a character array instead.
Fixes hw/acpi: Generic Port Affinity Structure Support
Tested-by Richard Henderson <[email protected]>Signed-off-by Jonathan Cameron <[email protected]>---
Richard ran the version posted in the thread on an s390 instance. Thanks for the help!Difference from version in thread:
- Instantiate i in the for loop.Sending out now so Michael can decide whether to fold this in, or drop the GP series for now from his pull request (in which case I'll do an updated version with this and Markus' docs feedback folded in.)
--- include/hw/acpi/acpi_generic_initiator.h | 2 +- hw/acpi/acpi_generic_initiator.c | 4 +++- 2 files changed, 4 insertions(+), 2 deletions(-)Quoted 15 lines
include/hw/acpi/acpi_generic_initiator.h typedef struct PCIDeviceHandle { · line 67
Quoted 13 lines
include/hw/acpi/acpi_generic_initiator.h +1
-1@@ -61,7 +61,7 @@ typedef struct PCIDeviceHandle {uint16_t bdf; };struct { -uint64_t hid; +char hid[8 ];uint32_t uid; }; };not sure on top of what this patch applies but I have some generic comments wrt it
https://lore.kernel.org/qemu-devel/[email protected]/
Comments are all on elements of the existing upstream code, but I'm touching it anyway so will look at making the improvements you suggest as new precursors to v3 given we are going around again anyway.
Quoted 3 lines
why PCIDeviceHandle is in header file? is there plan for it being used outside of
acpi_generic_initiator.c?I'll add a precursor patch to my series that moves
it and anything else that should be more local. May well move to being local inaml_build.cgiven your later comments with the various fields passed in as parameters.Quoted 23 lines
Quoted 7 lines
hw/acpi/acpi_generic_initiator.c +0
-0hw/acpi/acpi_generic_initiator.c build_srat_generic_node_affinity(GArray *table_data, int node, · line 158
Quoted 9 lines
hw/acpi/acpi_generic_initiator.c +3
-1@@ -151,7 +151,9 @@ build_srat_generic_node_affinity(GArray *table_data, int node,build_append_int_noprefix (table_data,0 ,12 ); }else {/* Device Handle - ACPI */ -build_append_int_noprefix (table_data, handle->hid,8 ); +for (int i =0 ; i <sizeof (handle->hid); i++) { +build_append_int_noprefix (table_data, handle->hid[i],1 ); + }build_append_int_noprefix (table_data, handle->uid,4 );build_append_int_noprefix (table_data,0 ,4 );instead of open codding structure
it might be better to introduce helper in
aml_build.c
something like
/* proper reference to spec as we do for other ACPI primitives */build_append_srat_acpi_device_handle(GArray *table_data, char* hid, unit32_t uid)Quoted 7 lines
assert(strlen(hid) ... for() { build_append_byte() } ...the same applies to "Device Handle - PCI" structure
Quoted 7 lines
I'll look at moving that stuff and the affinity structure creation code themselves in there. I think they ended up in this file because of the other infrastructure needed to create these nodes and it will have felt natural to keep this together.
Putting it in
aml_build.cwill put it with similar code though which makes sense to me.
the point of moving handle packing to aml-build.c,
is to isolate primitives that likely could be reused later on elsewhere and hide little endiannes from API user.
So shuch errors as you are fixing wouldn't be easy to introduce (as long as API does it right)
Also this API probably should take not packed BDF, i.e. something like this:
build_append_srat_pci_device_handle(GArray *table_data, bus, dev, func)
Or a packed BDF as you suggest in the later email, but then API function wold have to 'decode' that before putting numbers into table, which complicates things and likely would pull in PCI deps to unpack BDF, which I'd rather avoid in generic aml-build.c
Quoted 34 lines
Quoted 5 lines
Also get rid of PCI deps in
acpi_generic_initiator.c
move build_all_acpi_generic_initiators/build_srat_generic_pci_initiator intohw/acpi/pci.cToday it's used only for PCI devices, but that's partly an artifact of how we get to the root complex via the bus below it.
Spec wise, it's just as applicable to platform devices etc, but maybe we can move it to
pci.cfor now and move it out again if it gains other users. Or leave it inacpi_generic_initiator.cbut have all the aml stuff inaml_build.cas you suggest.Quoted 2 lines
file if it has to access PCI code/structures directly
(which I'm not convinced it should, can we get/expose what it needs as QOM properties?)Maybe. I'll see what I can come up with. This feels involved however so I'm more doubtful about this as a precursor.
Quoted 4 lines
btw:
build_all_acpi_generic_initiators()name doesn't match what it's doing. it composes only one initiator entry.I'll look at tidying up all the relevant naming.
Jonathan
Quoted 4 lines
Quoted 2 lines
hw/acpi/acpi_generic_initiator.c +0
-0}
Quoted 111 lines · On Fri, 14 Jun 2024 12:57:25 +0200 Igor Mammedov <[email protected]> wrote:
Quoted 93 lines · On Thu, 6 Jun 2024 18:47:16 +0100 Jonathan Cameron…
Quoted 28 lines · On Thu, 6 Jun 2024 16:06:53 +0200 Igor Mammedov <[email protected]> wrote:
Quoted 25 lines · On Wed, 5 Jun 2024 19:04:55 +0100 Jonathan Cameron…
Treating the HID as an integer caused it to get bit reversed on big endian hosts running little endian guests. Treat it as a character array instead.
Fixes hw/acpi: Generic Port Affinity Structure Support
Tested-by Richard Henderson <[email protected]>Signed-off-by Jonathan Cameron <[email protected]>---
Richard ran the version posted in the thread on an s390 instance. Thanks for the help!Difference from version in thread:
- Instantiate i in the for loop.Sending out now so Michael can decide whether to fold this in, or drop the GP series for now from his pull request (in which case I'll do an updated version with this and Markus' docs feedback folded in.)
--- include/hw/acpi/acpi_generic_initiator.h | 2 +- hw/acpi/acpi_generic_initiator.c | 4 +++- 2 files changed, 4 insertions(+), 2 deletions(-)Quoted 15 lines
include/hw/acpi/acpi_generic_initiator.h typedef struct PCIDeviceHandle { · line 67
Quoted 13 lines
include/hw/acpi/acpi_generic_initiator.h +1
-1@@ -61,7 +61,7 @@ typedef struct PCIDeviceHandle {uint16_t bdf; };struct { -uint64_t hid; +char hid[8 ];uint32_t uid; }; };not sure on top of what this patch applies but I have some generic comments wrt it
https://lore.kernel.org/qemu-devel/[email protected]/
Comments are all on elements of the existing upstream code, but I'm touching it anyway so will look at making the improvements you suggest as new precursors to v3 given we are going around again anyway.
Quoted 3 lines
why PCIDeviceHandle is in header file? is there plan for it being used outside of
acpi_generic_initiator.c?I'll add a precursor patch to my series that moves
it and anything else that should be more local. May well move to being local inaml_build.cgiven your later comments with the various fields passed in as parameters.Quoted 23 lines
Quoted 7 lines
hw/acpi/acpi_generic_initiator.c +0
-0hw/acpi/acpi_generic_initiator.c build_srat_generic_node_affinity(GArray *table_data, int node, · line 158
Quoted 9 lines
hw/acpi/acpi_generic_initiator.c +3
-1@@ -151,7 +151,9 @@ build_srat_generic_node_affinity(GArray *table_data, int node,build_append_int_noprefix (table_data,0 ,12 ); }else {/* Device Handle - ACPI */ -build_append_int_noprefix (table_data, handle->hid,8 ); +for (int i =0 ; i <sizeof (handle->hid); i++) { +build_append_int_noprefix (table_data, handle->hid[i],1 ); + }build_append_int_noprefix (table_data, handle->uid,4 );build_append_int_noprefix (table_data,0 ,4 );instead of open codding structure
it might be better to introduce helper in
aml_build.c
something like
/* proper reference to spec as we do for other ACPI primitives */build_append_srat_acpi_device_handle(GArray *table_data, char* hid, unit32_t uid)Quoted 7 lines
assert(strlen(hid) ... for() { build_append_byte() } ...the same applies to "Device Handle - PCI" structure
Quoted 7 lines
I'll look at moving that stuff and the affinity structure creation code themselves in there. I think they ended up in this file because of the other infrastructure needed to create these nodes and it will have felt natural to keep this together.
Putting it in
aml_build.cwill put it with similar code though which makes sense to me.the point of moving handle packing to
aml-build.c,
is to isolate primitives that likely could be reused later on elsewhere and hide little endiannes from API user.
So shuch errors as you are fixing wouldn't be easy to introduce (as long as API does it right)
Quoted 7 lines
Also this API probably should take not packed BDF, i.e. something like this:
build_append_srat_pci_device_handle(GArray *table_data, bus, dev, func)Or a packed BDF as you suggest in the later email, but then API function wold have to 'decode' that before putting numbers into table, which complicates things and likely would pull in PCI deps to unpack BDF, which I'd rather avoid in generic
aml-build.c
Ok. I can split it up. My motivation for the encoded version was that the spec field is defined as a 2 byte field, but it is also broken out in the description into byte 2 then various bits of byte 3 so we can construct it that way instead. (were it defined as bits in the 16 bit field this would make less sense). Should still be obvious enough to anyone trying to correlate the two.
Splitting the devfn bit up though is tricky as that doesn't really have a separate meaning in PCI any more given ARI where it becomes an 8 bit function ID. So probably makes more sense to keep that as devfn as it's coming from pci->devfn in that form anyway and they both forms get encoded into a byte anyway.
Jonathan
Quoted 37 lines
Quoted 35 lines
Quoted 6 lines
Also get rid of PCI deps in
acpi_generic_initiator.c
move build_all_acpi_generic_initiators/build_srat_generic_pci_initiator intohw/acpi/pci.cToday it's used only for PCI devices, but that's partly an artifact of how we get to the root complex via the bus below it.
Spec wise, it's just as applicable to platform devices etc, but maybe we can move it to
pci.cfor now and move it out again if it gains other users. Or leave it inacpi_generic_initiator.cbut have all the aml stuff inaml_build.cas you suggest.Quoted 2 lines
file if it has to access PCI code/structures directly
(which I'm not convinced it should, can we get/expose what it needs as QOM properties?)Maybe. I'll see what I can come up with. This feels involved however so I'm more doubtful about this as a precursor.
Quoted 4 lines
btw:
build_all_acpi_generic_initiators()name doesn't match what it's doing. it composes only one initiator entry.I'll look at tidying up all the relevant naming.
Jonathan
Quoted 4 lines
Quoted 2 lines
hw/acpi/acpi_generic_initiator.c +0
-0}
Quoted 129 lines · On Fri, 14 Jun 2024 15:08:35 +0100 Jonathan Cameron…
Quoted 111 lines · On Fri, 14 Jun 2024 12:57:25 +0200 Igor Mammedov <[email protected]> wrote:
Quoted 93 lines · On Thu, 6 Jun 2024 18:47:16 +0100 Jonathan Cameron…
Quoted 28 lines · On Thu, 6 Jun 2024 16:06:53 +0200 Igor Mammedov <[email protected]> wrote:
Quoted 25 lines · On Wed, 5 Jun 2024 19:04:55 +0100 Jonathan Cameron…
Treating the HID as an integer caused it to get bit reversed on big endian hosts running little endian guests. Treat it as a character array instead.
Fixes hw/acpi: Generic Port Affinity Structure Support
Tested-by Richard Henderson <[email protected]>Signed-off-by Jonathan Cameron <[email protected]>---
Richard ran the version posted in the thread on an s390 instance. Thanks for the help!Difference from version in thread:
- Instantiate i in the for loop.Sending out now so Michael can decide whether to fold this in, or drop the GP series for now from his pull request (in which case I'll do an updated version with this and Markus' docs feedback folded in.)
--- include/hw/acpi/acpi_generic_initiator.h | 2 +- hw/acpi/acpi_generic_initiator.c | 4 +++- 2 files changed, 4 insertions(+), 2 deletions(-)Quoted 15 lines
include/hw/acpi/acpi_generic_initiator.h typedef struct PCIDeviceHandle { · line 67
Quoted 13 lines
include/hw/acpi/acpi_generic_initiator.h +1
-1@@ -61,7 +61,7 @@ typedef struct PCIDeviceHandle {uint16_t bdf; };struct { -uint64_t hid; +char hid[8 ];uint32_t uid; }; };not sure on top of what this patch applies but I have some generic comments wrt it
https://lore.kernel.org/qemu-devel/[email protected]/
Comments are all on elements of the existing upstream code, but I'm touching it anyway so will look at making the improvements you suggest as new precursors to v3 given we are going around again anyway.
Quoted 3 lines
why PCIDeviceHandle is in header file? is there plan for it being used outside of
acpi_generic_initiator.c?I'll add a precursor patch to my series that moves
it and anything else that should be more local. May well move to being local inaml_build.cgiven your later comments with the various fields passed in as parameters.Quoted 23 lines
Quoted 7 lines
hw/acpi/acpi_generic_initiator.c +0
-0hw/acpi/acpi_generic_initiator.c build_srat_generic_node_affinity(GArray *table_data, int node, · line 158
Quoted 9 lines
hw/acpi/acpi_generic_initiator.c +3
-1@@ -151,7 +151,9 @@ build_srat_generic_node_affinity(GArray *table_data, int node,build_append_int_noprefix (table_data,0 ,12 ); }else {/* Device Handle - ACPI */ -build_append_int_noprefix (table_data, handle->hid,8 ); +for (int i =0 ; i <sizeof (handle->hid); i++) { +build_append_int_noprefix (table_data, handle->hid[i],1 ); + }build_append_int_noprefix (table_data, handle->uid,4 );build_append_int_noprefix (table_data,0 ,4 );instead of open codding structure
it might be better to introduce helper in
aml_build.c
something like
/* proper reference to spec as we do for other ACPI primitives */build_append_srat_acpi_device_handle(GArray *table_data, char* hid, unit32_t uid)Quoted 7 lines
assert(strlen(hid) ... for() { build_append_byte() } ...the same applies to "Device Handle - PCI" structure
Quoted 7 lines
I'll look at moving that stuff and the affinity structure creation code themselves in there. I think they ended up in this file because of the other infrastructure needed to create these nodes and it will have felt natural to keep this together.
Putting it in
aml_build.cwill put it with similar code though which makes sense to me.the point of moving handle packing to
aml-build.c,
is to isolate primitives that likely could be reused later on elsewhere and hide little endiannes from API user.
So shuch errors as you are fixing wouldn't be easy to introduce (as long as API does it right)Quoted 7 lines
Also this API probably should take not packed BDF, i.e. something like this:
build_append_srat_pci_device_handle(GArray *table_data, bus, dev, func)Or a packed BDF as you suggest in the later email, but then API function wold have to 'decode' that before putting numbers into table, which complicates things and likely would pull in PCI deps to unpack BDF, which I'd rather avoid in generic
aml-build.cOk. I can split it up. My motivation for the encoded version was that the spec field is defined as a 2 byte field, but it is also broken out in the description into byte 2 then various bits of byte 3 so we can construct it that way instead. (were it defined as bits in the 16 bit field this would make less sense). Should still be obvious enough to anyone trying to correlate the two.
Quoted 5 lines
Splitting the devfn bit up though is tricky as that doesn't really have a separate meaning in PCI any more given ARI where it becomes an 8 bit function ID. So probably makes more sense to keep that as devfn as it's coming from
pci->devfnin that form anyway and they both forms get encoded into a byte anyway.
ack,
as long as acpi API user doesn't have to worry about byte order it should be fine
Quoted 42 lines
Jonathan
Quoted 37 lines
Quoted 35 lines
Quoted 6 lines
Also get rid of PCI deps in
acpi_generic_initiator.c
move build_all_acpi_generic_initiators/build_srat_generic_pci_initiator intohw/acpi/pci.cToday it's used only for PCI devices, but that's partly an artifact of how we get to the root complex via the bus below it.
Spec wise, it's just as applicable to platform devices etc, but maybe we can move it to
pci.cfor now and move it out again if it gains other users. Or leave it inacpi_generic_initiator.cbut have all the aml stuff inaml_build.cas you suggest.Quoted 2 lines
file if it has to access PCI code/structures directly
(which I'm not convinced it should, can we get/expose what it needs as QOM properties?)Maybe. I'll see what I can come up with. This feels involved however so I'm more doubtful about this as a precursor.
Quoted 4 lines
btw:
build_all_acpi_generic_initiators()name doesn't match what it's doing. it composes only one initiator entry.I'll look at tidying up all the relevant naming.
Jonathan
Quoted 4 lines
Quoted 2 lines
hw/acpi/acpi_generic_initiator.c +0
-0}
Quoted 129 lines · On Fri, 14 Jun 2024 15:08:35 +0100 Jonathan Cameron…
Quoted 111 lines · On Fri, 14 Jun 2024 12:57:25 +0200 Igor Mammedov <[email protected]> wrote:
Quoted 93 lines · On Thu, 6 Jun 2024 18:47:16 +0100 Jonathan Cameron…
Quoted 28 lines · On Thu, 6 Jun 2024 16:06:53 +0200 Igor Mammedov <[email protected]> wrote:
Quoted 25 lines · On Wed, 5 Jun 2024 19:04:55 +0100 Jonathan Cameron…
Treating the HID as an integer caused it to get bit reversed on big endian hosts running little endian guests. Treat it as a character array instead.
Fixes hw/acpi: Generic Port Affinity Structure Support
Tested-by Richard Henderson <[email protected]>Signed-off-by Jonathan Cameron <[email protected]>---
Richard ran the version posted in the thread on an s390 instance. Thanks for the help!Difference from version in thread:
- Instantiate i in the for loop.Sending out now so Michael can decide whether to fold this in, or drop the GP series for now from his pull request (in which case I'll do an updated version with this and Markus' docs feedback folded in.)
--- include/hw/acpi/acpi_generic_initiator.h | 2 +- hw/acpi/acpi_generic_initiator.c | 4 +++- 2 files changed, 4 insertions(+), 2 deletions(-)Quoted 15 lines
include/hw/acpi/acpi_generic_initiator.h typedef struct PCIDeviceHandle { · line 67
Quoted 13 lines
include/hw/acpi/acpi_generic_initiator.h +1
-1@@ -61,7 +61,7 @@ typedef struct PCIDeviceHandle {uint16_t bdf; };struct { -uint64_t hid; +char hid[8 ];uint32_t uid; }; };not sure on top of what this patch applies but I have some generic comments wrt it
https://lore.kernel.org/qemu-devel/[email protected]/
Comments are all on elements of the existing upstream code, but I'm touching it anyway so will look at making the improvements you suggest as new precursors to v3 given we are going around again anyway.
Quoted 3 lines
why PCIDeviceHandle is in header file? is there plan for it being used outside of
acpi_generic_initiator.c?I'll add a precursor patch to my series that moves
it and anything else that should be more local. May well move to being local inaml_build.cgiven your later comments with the various fields passed in as parameters.Quoted 23 lines
Quoted 7 lines
hw/acpi/acpi_generic_initiator.c +0
-0hw/acpi/acpi_generic_initiator.c build_srat_generic_node_affinity(GArray *table_data, int node, · line 158
Quoted 9 lines
hw/acpi/acpi_generic_initiator.c +3
-1@@ -151,7 +151,9 @@ build_srat_generic_node_affinity(GArray *table_data, int node,build_append_int_noprefix (table_data,0 ,12 ); }else {/* Device Handle - ACPI */ -build_append_int_noprefix (table_data, handle->hid,8 ); +for (int i =0 ; i <sizeof (handle->hid); i++) { +build_append_int_noprefix (table_data, handle->hid[i],1 ); + }build_append_int_noprefix (table_data, handle->uid,4 );build_append_int_noprefix (table_data,0 ,4 );instead of open codding structure
it might be better to introduce helper in
aml_build.c
something like
/* proper reference to spec as we do for other ACPI primitives */build_append_srat_acpi_device_handle(GArray *table_data, char* hid, unit32_t uid)Quoted 7 lines
assert(strlen(hid) ... for() { build_append_byte() } ...the same applies to "Device Handle - PCI" structure
Quoted 7 lines
I'll look at moving that stuff and the affinity structure creation code themselves in there. I think they ended up in this file because of the other infrastructure needed to create these nodes and it will have felt natural to keep this together.
Putting it in
aml_build.cwill put it with similar code though which makes sense to me.the point of moving handle packing to
aml-build.c,
is to isolate primitives that likely could be reused later on elsewhere and hide little endiannes from API user.
So shuch errors as you are fixing wouldn't be easy to introduce (as long as API does it right)Quoted 7 lines
Also this API probably should take not packed BDF, i.e. something like this:
build_append_srat_pci_device_handle(GArray *table_data, bus, dev, func)Or a packed BDF as you suggest in the later email, but then API function wold have to 'decode' that before putting numbers into table, which complicates things and likely would pull in PCI deps to unpack BDF, which I'd rather avoid in generic
aml-build.cOk. I can split it up. My motivation for the encoded version was that the spec field is defined as a 2 byte field, but it is also broken out in the description into byte 2 then various bits of byte 3 so we can construct it that way instead. (were it defined as bits in the 16 bit field this would make less sense). Should still be obvious enough to anyone trying to correlate the two.
Quoted 5 lines
Splitting the devfn bit up though is tricky as that doesn't really have a separate meaning in PCI any more given ARI where it becomes an 8 bit function ID. So probably makes more sense to keep that as devfn as it's coming from
pci->devfnin that form anyway and they both forms get encoded into a byte anyway.
I guess it was inevitable (and perhaps you had this thought). QEMU ordering of BDF has the bytes swapped wrt to the ACPI ordering. With them split the test was failing. I'll also tweak the test to ensure we have a non 0 bus number (by inserting a root port rather than having the generic initiator on the root bridge bus 0).
Ankit. Can you confirm if you were seeing these reversed?
https://elixir.bootlin.com/qemu/v9.0.1/source/hw/acpi/acpi_generic_initiator.c#L134
uses PCI_BUIILD_BDF() which has bus << 8
The ACPI write is little endian, so bus ends up in byte 3 but should be in byte 2.
Jonathan
Quoted 43 lines
Jonathan
Quoted 37 lines
Quoted 35 lines
Quoted 6 lines
Also get rid of PCI deps in
acpi_generic_initiator.c
move build_all_acpi_generic_initiators/build_srat_generic_pci_initiator intohw/acpi/pci.cToday it's used only for PCI devices, but that's partly an artifact of how we get to the root complex via the bus below it.
Spec wise, it's just as applicable to platform devices etc, but maybe we can move it to
pci.cfor now and move it out again if it gains other users. Or leave it inacpi_generic_initiator.cbut have all the aml stuff inaml_build.cas you suggest.Quoted 2 lines
file if it has to access PCI code/structures directly
(which I'm not convinced it should, can we get/expose what it needs as QOM properties?)Maybe. I'll see what I can come up with. This feels involved however so I'm more doubtful about this as a precursor.
Quoted 4 lines
btw:
build_all_acpi_generic_initiators()name doesn't match what it's doing. it composes only one initiator entry.I'll look at tidying up all the relevant naming.
Jonathan
Quoted 4 lines
Quoted 2 lines
hw/acpi/acpi_generic_initiator.c +0
-0}
Quoted 138 lines · On Mon, 17 Jun 2024 13:05:15 +0100 Jonathan Cameron…
Quoted 129 lines · On Fri, 14 Jun 2024 15:08:35 +0100 Jonathan Cameron…
Quoted 111 lines · On Fri, 14 Jun 2024 12:57:25 +0200 Igor Mammedov <[email protected]> wrote:
Quoted 93 lines · On Thu, 6 Jun 2024 18:47:16 +0100 Jonathan Cameron…
Quoted 28 lines · On Thu, 6 Jun 2024 16:06:53 +0200 Igor Mammedov <[email protected]> wrote:
Quoted 25 lines · On Wed, 5 Jun 2024 19:04:55 +0100 Jonathan Cameron…
Treating the HID as an integer caused it to get bit reversed on big endian hosts running little endian guests. Treat it as a character array instead.
Fixes hw/acpi: Generic Port Affinity Structure Support
Tested-by Richard Henderson <[email protected]>Signed-off-by Jonathan Cameron <[email protected]>---
Richard ran the version posted in the thread on an s390 instance. Thanks for the help!Difference from version in thread:
- Instantiate i in the for loop.Sending out now so Michael can decide whether to fold this in, or drop the GP series for now from his pull request (in which case I'll do an updated version with this and Markus' docs feedback folded in.)
--- include/hw/acpi/acpi_generic_initiator.h | 2 +- hw/acpi/acpi_generic_initiator.c | 4 +++- 2 files changed, 4 insertions(+), 2 deletions(-)Quoted 15 lines
include/hw/acpi/acpi_generic_initiator.h typedef struct PCIDeviceHandle { · line 67
Quoted 13 lines
include/hw/acpi/acpi_generic_initiator.h +1
-1@@ -61,7 +61,7 @@ typedef struct PCIDeviceHandle {uint16_t bdf; };struct { -uint64_t hid; +char hid[8 ];uint32_t uid; }; };not sure on top of what this patch applies but I have some generic comments wrt it
https://lore.kernel.org/qemu-devel/[email protected]/
Comments are all on elements of the existing upstream code, but I'm touching it anyway so will look at making the improvements you suggest as new precursors to v3 given we are going around again anyway.
Quoted 3 lines
why PCIDeviceHandle is in header file? is there plan for it being used outside of
acpi_generic_initiator.c?I'll add a precursor patch to my series that moves
it and anything else that should be more local. May well move to being local inaml_build.cgiven your later comments with the various fields passed in as parameters.Quoted 23 lines
Quoted 7 lines
hw/acpi/acpi_generic_initiator.c +0
-0hw/acpi/acpi_generic_initiator.c build_srat_generic_node_affinity(GArray *table_data, int node, · line 158
Quoted 9 lines
hw/acpi/acpi_generic_initiator.c +3
-1@@ -151,7 +151,9 @@ build_srat_generic_node_affinity(GArray *table_data, int node,build_append_int_noprefix (table_data,0 ,12 ); }else {/* Device Handle - ACPI */ -build_append_int_noprefix (table_data, handle->hid,8 ); +for (int i =0 ; i <sizeof (handle->hid); i++) { +build_append_int_noprefix (table_data, handle->hid[i],1 ); + }build_append_int_noprefix (table_data, handle->uid,4 );build_append_int_noprefix (table_data,0 ,4 );instead of open codding structure
it might be better to introduce helper in
aml_build.c
something like
/* proper reference to spec as we do for other ACPI primitives */build_append_srat_acpi_device_handle(GArray *table_data, char* hid, unit32_t uid)Quoted 7 lines
assert(strlen(hid) ... for() { build_append_byte() } ...the same applies to "Device Handle - PCI" structure
Quoted 7 lines
I'll look at moving that stuff and the affinity structure creation code themselves in there. I think they ended up in this file because of the other infrastructure needed to create these nodes and it will have felt natural to keep this together.
Putting it in
aml_build.cwill put it with similar code though which makes sense to me.the point of moving handle packing to
aml-build.c,
is to isolate primitives that likely could be reused later on elsewhere and hide little endiannes from API user.
So shuch errors as you are fixing wouldn't be easy to introduce (as long as API does it right)Quoted 7 lines
Also this API probably should take not packed BDF, i.e. something like this:
build_append_srat_pci_device_handle(GArray *table_data, bus, dev, func)Or a packed BDF as you suggest in the later email, but then API function wold have to 'decode' that before putting numbers into table, which complicates things and likely would pull in PCI deps to unpack BDF, which I'd rather avoid in generic
aml-build.cOk. I can split it up. My motivation for the encoded version was that the spec field is defined as a 2 byte field, but it is also broken out in the description into byte 2 then various bits of byte 3 so we can construct it that way instead. (were it defined as bits in the 16 bit field this would make less sense). Should still be obvious enough to anyone trying to correlate the two.
Quoted 5 lines
Splitting the devfn bit up though is tricky as that doesn't really have a separate meaning in PCI any more given ARI where it becomes an 8 bit function ID. So probably makes more sense to keep that as devfn as it's coming from
pci->devfnin that form anyway and they both forms get encoded into a byte anyway.
Quoted 5 lines
I guess it was inevitable (and perhaps you had this thought). QEMU ordering of BDF has the bytes swapped wrt to the ACPI ordering. With them split the test was failing. I'll also tweak the test to ensure we have a non 0 bus number (by inserting a root port rather than having the generic initiator on the root bridge bus 0).
that's why I asked for split BDF (into parts) for acpi API to provide endian agonstic interface. Internally acpi functions can convert/pack arguments as necessary. And it would be easier to validate/review by just comparing with spec description.
Quoted 53 lines
Ankit. Can you confirm if you were seeing these reversed?
https://elixir.bootlin.com/qemu/v9.0.1/source/hw/acpi/acpi_generic_initiator.c#L134
usesPCI_BUIILD_BDF()which has bus << 8
The ACPI write is little endian, so bus ends up in byte 3 but should be in byte 2.Jonathan
Quoted 43 lines
Jonathan
Quoted 37 lines
Quoted 35 lines
Quoted 6 lines
Also get rid of PCI deps in
acpi_generic_initiator.c
move build_all_acpi_generic_initiators/build_srat_generic_pci_initiator intohw/acpi/pci.cToday it's used only for PCI devices, but that's partly an artifact of how we get to the root complex via the bus below it.
Spec wise, it's just as applicable to platform devices etc, but maybe we can move it to
pci.cfor now and move it out again if it gains other users. Or leave it inacpi_generic_initiator.cbut have all the aml stuff inaml_build.cas you suggest.Quoted 2 lines
file if it has to access PCI code/structures directly
(which I'm not convinced it should, can we get/expose what it needs as QOM properties?)Maybe. I'll see what I can come up with. This feels involved however so I'm more doubtful about this as a precursor.
Quoted 4 lines
btw:
build_all_acpi_generic_initiators()name doesn't match what it's doing. it composes only one initiator entry.I'll look at tidying up all the relevant naming.
Jonathan
Quoted 4 lines
Quoted 2 lines
hw/acpi/acpi_generic_initiator.c +0
-0}