Skip to contentSkip to conversation

arm64: dts: imx8mm-venice-gw700x: add support for PHY LED's

PATCH Applied Tim Harvey 2 participants 2 messages Jun 18, 2024 – Jun 27, 2024

Subsystems (2)
lore
Share & tools
lore

Tim Harvey

author
#0 lore raw

PATCH 1/1 arm64: dts: imx8mm-venice-gw700x: add support for PHY LED's

The GW700x SoM has an onboard DP83867 RGMII GbE PHY that drives two LED's (LED1 and LED2, skipping LED0). Add the appropriate dt bindings to allow these PHY LED's to be controlled via a netdev trigger.

---
 .../dts/freescale/imx8mm-venice-gw700x.dtsi   | 20 +++++++++++++++++++
 1 file changed, 20 insertions(+)
arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi +20 -0
index de7f67a4ff2a..36803b038cd5 100644
@@ -5,6 +5,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
 #include <dt-bindings/net/ti-dp83867.h>
 
 / {
@@ -113,6 +114,25 @@ ethphy0: ethernet-phy@0 {
 			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
 			tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
 			rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@1 {
+					reg = <1>;
+					color = <LED_COLOR_ID_AMBER>;
+					function = LED_FUNCTION_LAN;
+					default-state = "keep";
+				};
+
+				led@2 {
+					reg = <2>;
+					color = <LED_COLOR_ID_GREEN>;
+					function = LED_FUNCTION_LAN;
+					default-state = "keep";
+				};
+			};
 		};
 	};
 };
Signature · 1 line
2.25.1
Applied
#1 lore raw
Quoted 5 lines · Tim Harvey

The GW700x SoM has an onboard DP83867 RGMII GbE PHY that drives two LED's (LED1 and LED2, skipping LED0). Add the appropriate dt bindings to allow these PHY LED's to be controlled via a netdev trigger.

Applied, thanks!