board: gateworks: venice: delay before reading GSC EEPROM
PATCH 1/1 board: gateworks: venice: delay before reading GSC EEPROM
Extensive testing has shown that at higher temperatures operating without a GSC backup battery, the GSC needs a small delay after releasing the I2C SDA/SCL pins before it is ready to handle I2C requests.
Add a delay to avoid errors such as:wait_for_sr_state: Arbitration lost sr=93 cr=80 state=2020i2c_init_transfer: failed for chip 0x20 retry=0
Signed-off-by Tim Harvey <[email protected]>
--- board/gateworks/venice/spl.c | 1 + 1 file changed, 1 insertion(+)
board/gateworks/venice/spl.c +1 -0
@@ -303,6 +303,7 @@ void board_init_f(ulong dummy)mdelay (10 ); }pinctrl_select_state (bus,"default" ); +mdelay (10 ); } }/* Wait indefiniately until the GSC probes */
Signature · 1 line
2.25.1