board: gateworks: venice: add print for GPY111 PHY name
PATCH 1/1 board: gateworks: venice: add print for GPY111 PHY name
Due to supply chain issues Venice boards use either a DP83867 or a GPY111 RGMII PHY. We already print an identifier for the DP83867 so add one for the GPY111 to better identify what PHY is on a board:
Example:
Net: GPY111 eth0: ethernet@30be0000 [PRIME]
Net: DP83867 eth0: ethernet@30be0000 [PRIME]
Signed-off-by Tim Harvey <[email protected]>
--- board/gateworks/venice/venice.c | 3 +++ 1 file changed, 3 insertions(+)
board/gateworks/venice/venice.c +3 -0
@@ -75,6 +75,9 @@ int board_phy_config(struct phy_device *phydev) val |=0xb <<8 ;/* LED2(Green;Link/Act): blink for TX/RX act */ phy_write (phydev,MDIO_DEVAD_NONE ,24 , val);break ; +case 0xd565a401 :/* MaxLinear GPY111 */ +puts ("GPY111 " ); +break ; }if (phydev->drv->config)
Signature · 1 line
2.25.1