imx8mp-venice-gw74xx: default USB1 to host mode
Subsystems (2)
PATCH v2 1/1 imx8mp-venice-gw74xx: default USB1 to host mode
The GW74xx USB1 controller connects to a dual-role connector using a GPIO for role detection via the usb-connector Linux driver (usb-conn-gpio.c).
This drive does not exist yet in U-Boot so for now we will just default USB1 to host mode.
Signed-off-by Tim Harvey <[email protected]>
---
v2: provide missing commit message
--- arch/arm/dts/imx8mp-venice-gw74xx-u-boot.dtsi | 5 +++++ 1 file changed, 5 insertions(+)
arch/arm/dts/imx8mp-venice-gw74xx-u-boot.dtsi +5 -0
@@ -243,3 +243,8 @@ &wdog1 { bootph-pre-ram; }; + +/* gpio-usb-con not supported yet in U-Boot so make this a host for now */ +&usb_dwc3_0 { + dr_mode = "host"; +};
Signature · 1 line
2.25.1