Skip to contentSkip to conversation

usb: dwc3: core: Workaround for CSR read timeout

PATCH Superseded joswang 2 participants 3 messages Jun 19, 2024

Subsystems (3)

v6 of 7 Superseded Latest is v7 →

lore
Share & tools
lore

joswang

author
#0 lore raw

PATCH v6 1/1 usb: dwc3: core: Workaround for CSR read timeout

From: Jos Wang <[email protected]>

This is a workaround for STAR 4846132, which only affects DWC_usb31 version2.00a operating in host mode.

There is a problem in DWC_usb31 version 2.00a operating in host mode that would cause a CSR read timeout When CSR read coincides with RAM Clock Gating Entry. By disable Clock Gating, sacrificing power consumption for normal operation.

---
v5 -> v6: no change
v4 -> v5: no change
v3 -> v4: modify commit message, add Cc: [email protected] v2 -> v3:
- code refactor
- modify comment, add STAR number, workaround applied in host mode
- modify commit message, add STAR number, workaround applied in host mode
- modify Author Jos Wang
v1 -> v2: no change

 drivers/usb/dwc3/core.c | 20 +++++++++++++++++++-
 1 file changed, 19 insertions(+), 1 deletion(-)
drivers/usb/dwc3/core.c +19 -1
index 7ee61a89520b..2a3adc80fe0f 100644
@@ -957,12 +957,16 @@ static bool dwc3_core_is_valid(struct dwc3 *dwc)
 
 static void dwc3_core_setup_global_control(struct dwc3 *dwc)
 {
+	unsigned int power_opt;
+	unsigned int hw_mode;
 	u32 reg;
 
 	reg = dwc3_readl(dwc->regs, DWC3_GCTL);
 	reg &= ~DWC3_GCTL_SCALEDOWN_MASK;
+	hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0);
+	power_opt = DWC3_GHWPARAMS1_EN_PWROPT(dwc->hwparams.hwparams1);
 
-	switch (DWC3_GHWPARAMS1_EN_PWROPT(dwc->hwparams.hwparams1)) {
+	switch (power_opt) {
 	case DWC3_GHWPARAMS1_EN_PWROPT_CLK:
 		/**
 		 * WORKAROUND: DWC3 revisions between 2.10a and 2.50a have an
@@ -995,6 +999,20 @@ static void dwc3_core_setup_global_control(struct dwc3 *dwc)
 		break;
 	}
 
+	/*
+	 * This is a workaround for STAR#4846132, which only affects
+	 * DWC_usb31 version2.00a operating in host mode.
+	 *
+	 * There is a problem in DWC_usb31 version 2.00a operating
+	 * in host mode that would cause a CSR read timeout When CSR
+	 * read coincides with RAM Clock Gating Entry. By disable
+	 * Clock Gating, sacrificing power consumption for normal
+	 * operation.
+	 */
+	if (power_opt != DWC3_GHWPARAMS1_EN_PWROPT_NO &&
+	    hw_mode != DWC3_GHWPARAMS0_MODE_GADGET && DWC3_VER_IS(DWC31, 200A))
+		reg |= DWC3_GCTL_DSBLCLKGTNG;
+
 	/* check if current dwc3 is on simulation board */
 	if (dwc->hwparams.hwparams6 & DWC3_GHWPARAMS6_EN_FPGA) {
 		dev_info(dwc->dev, "Running with FPGA optimizations\n");
Signature · 1 line
2.17.1
maintainer
#1 lore raw
Quoted 11 lines · joswang

From: Jos Wang <[email protected]>

This is a workaround for STAR 4846132, which only affects DWC_usb31 version2.00a operating in host mode.

There is a problem in DWC_usb31 version 2.00a operating in host mode that would cause a CSR read timeout When CSR read coincides with RAM Clock Gating Entry. By disable Clock Gating, sacrificing power consumption for normal operation.

Quoted 5 lines

---
v5 -> v6: no change
v4 -> v5: no change

If there was no change, why was there new versions submitted? Please always document what was done.

greg k-h

author
#2 lore raw
Quoted 19 lines · Greg KH
Quoted 11 lines · joswang

From: Jos Wang <[email protected]>

This is a workaround for STAR 4846132, which only affects DWC_usb31 version2.00a operating in host mode.

There is a problem in DWC_usb31 version 2.00a operating in host mode that would cause a CSR read timeout When CSR read coincides with RAM Clock Gating Entry. By disable Clock Gating, sacrificing power consumption for normal operation.

Quoted 5 lines

---
v5 -> v6: no change
v4 -> v5: no change

Quoted 4 lines

If there was no change, why was there new versions submitted? Please always document what was done.

greg k-h

Ok, I will submit a new version and add the differences.

Thanks,
Jos Wang