hwmon: iio: Use iio_read_channel_processed_scale for IIO_POWER
PATCH 1/1 hwmon: iio: Use iio_read_channel_processed_scale for IIO_POWER
Instead of rescaling power channels after the fact, use the dedicated scaling API. This should reduce any inaccuracies resulting from the scaling.
Signed-off-by Sean Anderson <[email protected]>
---
drivers/hwmon/iio_hwmon.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-)
drivers/hwmon/iio_hwmon.c +6 -5
@@ -49,16 +49,17 @@ static ssize_t iio_hwmon_read_val(struct device *dev,struct iio_channel *chan = &state->channels[sattr->index];enum iio_chan_type type; - ret =iio_read_channel_processed (chan, &result); -if (ret <0 ) -return ret; - ret =iio_get_channel_type (chan, &type);if (ret <0 )return ret;if (type ==IIO_POWER ) - result *=1000 ;/* mili-Watts to micro-Watts conversion */ +/* mili-Watts to micro-Watts conversion */ + ret =iio_read_channel_processed_scale (chan, &result,1000 ); +else + ret =iio_read_channel_processed (chan, &result); +if (ret <0 ) +return ret;return sprintf (buf,"%d\n" , result); }
Signature · 1 line
2.35.1.1320.gc452695387.dirty
Quoted 5 lines · Sean Anderson
Instead of rescaling power channels after the fact, use the dedicated scaling API. This should reduce any inaccuracies resulting from the scaling.
Signed-off-by Sean Anderson <[email protected]>
Applied.
Thanks,
Guenter