Skip to contentSkip to conversation

hw/ufs: Fix potential bugs in MMIO read|write

PATCH In review Minwoo Im 3 participants 4 messages Jun 23, 2024 – Jun 24, 2024

lore
Share & tools
lore

Minwoo Im

author
#0 lore raw

PATCH 1/1 hw/ufs: Fix potential bugs in MMIO read|write

This patch fixes two points reported in coverity scan report [1]. Check the MMIO access address with (addr + size), not just with the start offset addr to make sure that the requested memory access not to exceed the actual register region. We also updated (uint8_t *) to (uint32_t *) to represent we are accessing the MMIO registers by dword-sized only.

[1] https://lore.kernel.org/qemu-devel/CAFEAcA82L-WZnHMW0X+Dr40bHM-EVq2ZH4DG4pdqop4xxDP2Og@mail.gmail.com/

---
 hw/ufs/ufs.c | 31 ++++++++++++++++---------------
 1 file changed, 16 insertions(+), 15 deletions(-)
hw/ufs/ufs.c +16 -15
index 71a88d221ced..bf2ff02ac6e5 100644
@@ -55,17 +55,18 @@ static inline uint64_t ufs_reg_size(UfsHc *u)
     return ufs_mcq_op_reg_addr(u, 0) + sizeof(u->mcq_op_reg);
 }
 
-static inline bool ufs_is_mcq_reg(UfsHc *u, uint64_t addr)
+static inline bool ufs_is_mcq_reg(UfsHc *u, uint64_t addr, unsigned size)
 {
     uint64_t mcq_reg_addr = ufs_mcq_reg_addr(u, 0);
-    return addr >= mcq_reg_addr && addr < mcq_reg_addr + sizeof(u->mcq_reg);
+    return (addr >= mcq_reg_addr &&
+            addr + size <= mcq_reg_addr + sizeof(u->mcq_reg));
 }
 
-static inline bool ufs_is_mcq_op_reg(UfsHc *u, uint64_t addr)
+static inline bool ufs_is_mcq_op_reg(UfsHc *u, uint64_t addr, unsigned size)
 {
     uint64_t mcq_op_reg_addr = ufs_mcq_op_reg_addr(u, 0);
     return (addr >= mcq_op_reg_addr &&
-            addr < mcq_op_reg_addr + sizeof(u->mcq_op_reg));
+            addr  + size <= mcq_op_reg_addr + sizeof(u->mcq_op_reg));
 }
 
 static MemTxResult ufs_addr_read(UfsHc *u, hwaddr addr, void *buf, int size)
@@ -774,25 +775,25 @@ static void ufs_write_mcq_op_reg(UfsHc *u, hwaddr offset, uint32_t data,
 static uint64_t ufs_mmio_read(void *opaque, hwaddr addr, unsigned size)
 {
     UfsHc *u = (UfsHc *)opaque;
-    uint8_t *ptr;
+    uint32_t *ptr;
     uint64_t value;
     uint64_t offset;
 
-    if (addr < sizeof(u->reg)) {
+    if (addr + size <= sizeof(u->reg)) {
         offset = addr;
-        ptr = (uint8_t *)&u->reg;
-    } else if (ufs_is_mcq_reg(u, addr)) {
+        ptr = (uint32_t *)&u->reg;
+    } else if (ufs_is_mcq_reg(u, addr, size)) {
         offset = addr - ufs_mcq_reg_addr(u, 0);
-        ptr = (uint8_t *)&u->mcq_reg;
-    } else if (ufs_is_mcq_op_reg(u, addr)) {
+        ptr = (uint32_t *)&u->mcq_reg;
+    } else if (ufs_is_mcq_op_reg(u, addr, size)) {
         offset = addr - ufs_mcq_op_reg_addr(u, 0);
-        ptr = (uint8_t *)&u->mcq_op_reg;
+        ptr = (uint32_t *)&u->mcq_op_reg;
     } else {
         trace_ufs_err_invalid_register_offset(addr);
         return 0;
     }
 
-    value = *(uint32_t *)(ptr + offset);
+    value = ptr[offset >> 2];
     trace_ufs_mmio_read(addr, value, size);
     return value;
 }
@@ -804,11 +805,11 @@ static void ufs_mmio_write(void *opaque, hwaddr addr, uint64_t data,
 
     trace_ufs_mmio_write(addr, data, size);
 
-    if (addr < sizeof(u->reg)) {
+    if (addr + size <= sizeof(u->reg)) {
         ufs_write_reg(u, addr, data, size);
-    } else if (ufs_is_mcq_reg(u, addr)) {
+    } else if (ufs_is_mcq_reg(u, addr, size)) {
         ufs_write_mcq_reg(u, addr - ufs_mcq_reg_addr(u, 0), data, size);
-    } else if (ufs_is_mcq_op_reg(u, addr)) {
+    } else if (ufs_is_mcq_op_reg(u, addr, size)) {
         ufs_write_mcq_op_reg(u, addr - ufs_mcq_op_reg_addr(u, 0), data, size);
     } else {
         trace_ufs_err_invalid_register_offset(addr);
Signature · 1 line
2.34.1
Reviewed-by on v1 1/1
#1 lore raw
Quoted 11 lines · Minwoo Im

This patch fixes two points reported in coverity scan report [1]. Check the MMIO access address with (addr + size), not just with the start offset addr to make sure that the requested memory access not to exceed the actual register region. We also updated (uint8_t *) to (uint32_t *) to represent we are accessing the MMIO registers by dword-sized only.

[1] https://lore.kernel.org/qemu-devel/CAFEAcA82L-WZnHMW0X+Dr40bHM-EVq2ZH4DG4pdqop4xxDP2Og@mail.gmail.com/

Thank you for the patch.

Reviewed-by on v1 1/1
#2 lore raw
In reply to Minwoo Im
Quoted 30 lines · Minwoo Im

This patch fixes two points reported in coverity scan report [1]. Check the MMIO access address with (addr + size), not just with the start offset addr to make sure that the requested memory access not to exceed the actual register region. We also updated (uint8_t *) to (uint32_t *) to represent we are accessing the MMIO registers by dword-sized only.

[1] https://lore.kernel.org/qemu-devel/CAFEAcA82L-WZnHMW0X+Dr40bHM-EVq2ZH4DG4pdqop4xxDP2Og@mail.gmail.com/

---
 hw/ufs/ufs.c | 31 ++++++++++++++++---------------
 1 file changed, 16 insertions(+), 15 deletions(-)
hw/ufs/ufs.c +2 -2
index 71a88d221ced..bf2ff02ac6e5 100644
@@ -55,17 +55,18 @@ static inline uint64_t ufs_reg_size(UfsHc *u)
     return ufs_mcq_op_reg_addr(u, 0) + sizeof(u->mcq_op_reg);
 }
 
-static inline bool ufs_is_mcq_reg(UfsHc *u, uint64_t addr)
+static inline bool ufs_is_mcq_reg(UfsHc *u, uint64_t addr, unsigned size)
 {
     uint64_t mcq_reg_addr = ufs_mcq_reg_addr(u, 0);
-    return addr >= mcq_reg_addr && addr < mcq_reg_addr + sizeof(u->mcq_reg);
+    return (addr >= mcq_reg_addr &&

hw/ufs/ufs.c static inline uint64_t ufs_reg_size(UfsHc *u) · line 69

Quoted 10 lines
hw/ufs/ufs.c +3 -2
+            addr + size <= mcq_reg_addr + sizeof(u->mcq_reg));
 }
 
-static inline bool ufs_is_mcq_op_reg(UfsHc *u, uint64_t addr)
+static inline bool ufs_is_mcq_op_reg(UfsHc *u, uint64_t addr, unsigned size)
 {
     uint64_t mcq_op_reg_addr = ufs_mcq_op_reg_addr(u, 0);
     return (addr >= mcq_op_reg_addr &&
-            addr < mcq_op_reg_addr + sizeof(u->mcq_op_reg));
+            addr  + size <= mcq_op_reg_addr + sizeof(u->mcq_op_reg));

Stray extra space after "addr".

Otherwise

thanks
-- PMM

#3 lore raw
Quoted 33 lines · Peter Maydell
Quoted 32 lines · Minwoo Im

This patch fixes two points reported in coverity scan report [1]. Check the MMIO access address with (addr + size), not just with the start offset addr to make sure that the requested memory access not to exceed the actual register region. We also updated (uint8_t *) to (uint32_t *) to represent we are accessing the MMIO registers by dword-sized only.

[1] https://lore.kernel.org/qemu-devel/CAFEAcA82L-WZnHMW0X+Dr40bHM-EVq2ZH4DG4pdqop4xxDP2Og@mail.gmail.com/

---
  hw/ufs/ufs.c | 31 ++++++++++++++++---------------
  1 file changed, 16 insertions(+), 15 deletions(-)
hw/ufs/ufs.c +3 -2
index 71a88d221ced..bf2ff02ac6e5 100644
@@ -55,17 +55,18 @@ static inline uint64_t ufs_reg_size(UfsHc *u)
      return ufs_mcq_op_reg_addr(u, 0) + sizeof(u->mcq_op_reg);
  }
 
-static inline bool ufs_is_mcq_reg(UfsHc *u, uint64_t addr)
+static inline bool ufs_is_mcq_reg(UfsHc *u, uint64_t addr, unsigned size)
  {
      uint64_t mcq_reg_addr = ufs_mcq_reg_addr(u, 0);
-    return addr >= mcq_reg_addr && addr < mcq_reg_addr + sizeof(u->mcq_reg);
+    return (addr >= mcq_reg_addr &&
+            addr + size <= mcq_reg_addr + sizeof(u->mcq_reg));
  }
 
Quoted 8 lines

hw/ufs/ufs.c static inline uint64_t ufs_reg_size(UfsHc *u) · line 69

Quoted 7 lines
hw/ufs/ufs.c +2 -2
-static inline bool ufs_is_mcq_op_reg(UfsHc *u, uint64_t addr)
+static inline bool ufs_is_mcq_op_reg(UfsHc *u, uint64_t addr, unsigned size)
  {
      uint64_t mcq_op_reg_addr = ufs_mcq_op_reg_addr(u, 0);
      return (addr >= mcq_op_reg_addr &&
-            addr < mcq_op_reg_addr + sizeof(u->mcq_op_reg));
+            addr  + size <= mcq_op_reg_addr + sizeof(u->mcq_op_reg));

Stray extra space after "addr".

Thank you for your comment.

I'll fix it when I send the pull request.

Quoted 6 lines

Otherwise

thanks
-- PMM