bus/vmbus: add device_order field to rte_vmbus_dev
PATCH v2 1/1 bus/vmbus: add device_order field to rte_vmbus_dev
Field can be used to have static interface naming in DPDK based applications instead of uuid. RTE_FOREACH_DEV won't return the correct order of such devices due to vmbus_ignore_device in case of blocklisting/allowlisting. So device_order field will be helpful in that case.
--- drivers/bus/vmbus/bus_vmbus_driver.h | 1 + drivers/bus/vmbus/vmbus_common.c | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-)
drivers/bus/vmbus/bus_vmbus_driver.h +1 -0
@@ -37,6 +37,7 @@ struct rte_vmbus_device {rte_uuid_t device_id;/**< VMBUS device id */ rte_uuid_t class_id;/**< VMBUS device type */ uint32_t relid;/**< id for primary */ +uint16_t device_order;/**< Device order after probing */ uint8_t monitor_id;/**< monitor page */ int uio_num;/**< UIO device number */ uint32_t *int_page;/**< VMBUS interrupt page */
drivers/bus/vmbus/vmbus_common.c +1 -1
@@ -199,7 +199,7 @@ rte_vmbus_probe(void)char ubuf[RTE_UUID_STRLEN ];FOREACH_DEVICE_ON_VMBUS (dev) { - probed++; + dev->device_order = probed++;rte_uuid_unparse (dev->device_id, ubuf,sizeof (ubuf));
Signature · 1 line
2.34.1
PATCH v2 1/1 bus/vmbus: add device_order field to rte_vmbus_dev
Field can be used to have static interface naming in DPDK based applications instead of uuid. RTE_FOREACH_DEV won't return the correct order of such devices due to vmbus_ignore_device in case of blocklisting/allowlisting. So device_order field will be helpful in that case.
--- drivers/bus/vmbus/bus_vmbus_driver.h | 1 + drivers/bus/vmbus/vmbus_common.c | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-)
drivers/bus/vmbus/bus_vmbus_driver.h +1 -0
@@ -37,6 +37,7 @@ struct rte_vmbus_device {rte_uuid_t device_id;/**< VMBUS device id */ rte_uuid_t class_id;/**< VMBUS device type */ uint32_t relid;/**< id for primary */ +uint16_t device_order;/**< Device order after probing */ uint8_t monitor_id;/**< monitor page */ int uio_num;/**< UIO device number */ uint32_t *int_page;/**< VMBUS interrupt page */
drivers/bus/vmbus/vmbus_common.c +1 -1
@@ -199,7 +199,7 @@ rte_vmbus_probe(void)char ubuf[RTE_UUID_STRLEN ];FOREACH_DEVICE_ON_VMBUS (dev) { - probed++; + dev->device_order = probed++;rte_uuid_unparse (dev->device_id, ubuf,sizeof (ubuf));
Signature · 1 line
2.34.1
Quoted 8 lines · On Mon, 24 Jun 2024 11:15:21 +0000 Vladimir Ratnikov <[email protected]>…
Field can be used to have static interface naming in DPDK based applications instead of uuid.
RTE_FOREACH_DEVwon't return the correct order of such devices due tovmbus_ignore_devicein case of blocklisting/allowlisting. Sodevice_orderfield will be helpful in that case.Signed-off-by Vladimir Ratnikov <[email protected]>
The patch only has the device_order field, but it is set but not used anywhere in the DPDK. If you want to use it for naming then please add that patch as well.
Quoted 9 lines · On Mon, 24 Jun 2024 11:15:21 +0000 Vladimir Ratnikov <[email protected]>…
Field can be used to have static interface naming in DPDK based applications instead of uuid.
RTE_FOREACH_DEVwon't return the correct order of such devices due tovmbus_ignore_devicein case of blocklisting/allowlisting. Sodevice_orderfield will be helpful in that case.Signed-off-by Vladimir Ratnikov <[email protected]>---
Not sure the order of device discovery is predictable.
The order of devices on vmbus is when they were reported by the host OS. That is why Linux driver use other ways to have persistent naming.
Thanks for review!
Regarding to
Quoted 2 lines
The patch only has the
device_orderfield, but it is set but not used anywhere in the DPDK.
Unfortunately, It's not for DPDK usage, it's for DPDK based applications. After some time of testing, if nothing's changed in the host OS(no new devices, no removed devices) - the device list is always the same with the same order.
Quoted 17 lines · Stephen Hemminger
Quoted 9 lines · On Mon, 24 Jun 2024 11:15:21 +0000 Vladimir Ratnikov <[email protected]>…
Field can be used to have static interface naming in DPDK based applications instead of uuid.
RTE_FOREACH_DEVwon't return the correct order of such devices due tovmbus_ignore_devicein case of blocklisting/allowlisting. Sodevice_orderfield will be helpful in that case.Signed-off-by Vladimir Ratnikov <[email protected]>---
Not sure the order of device discovery is predictable.
The order of devices on vmbus is when they were reported by the host OS. That is why Linux driver use other ways to have persistent naming.
Hi Vladimir,
Is there another way that you can determine the device probe order from your application? (like going through the /sys/class/uio devices)
Long
From: Vladimir Ratnikov <[email protected]>
Sent: Tuesday, June 25, 2024 4:50 AM
To: Stephen Hemminger <[email protected]>
Cc: Long Li <[email protected]>; [email protected]
Subject: Re: [PATCH v2] bus/vmbus: add device_order field to rte_vmbus_dev
You don't often get email from [email protected]<mailto:[email protected]>. Learn why this is important<https://aka.ms/LearnAboutSenderIdentification> Thanks for review!
Regarding to
The patch only has the device_order field, but it is set but not used anywhere in the DPDK.
Unfortunately, It's not for DPDK usage, it's for DPDK based applications.
After some time of testing, if nothing's changed in the host OS(no new devices, no removed devices) - the device list is always the same with the same order.
On Tue, Jun 25, 2024 at 2:02 AM Stephen Hemminger <[email protected]<mailto:[email protected]>> wrote:
Quoted 9 lines · On Mon, 24 Jun 2024 11:15:21 +0000 Vladimir Ratnikov…
Field can be used to have static interface naming in DPDK based applications instead of uuid.
RTE_FOREACH_DEVwon't return the correct order of such devices due tovmbus_ignore_devicein case of blocklisting/allowlisting. Sodevice_orderfield will be helpful in that case.---
Not sure the order of device discovery is predictable.
The order of devices on vmbus is when they were reported by the host OS. That is why Linux driver use other ways to have persistent naming.
drivers/bus/vmbus/vmbus_common.c
Quoted 13 lines · On Mon, 24 Jun 2024 11:04:15 +0000 Vladimir Ratnikov <[email protected]>…
drivers/bus/vmbus/bus_vmbus_driver.h +1
-0@@ -37,6 +37,7 @@ struct rte_vmbus_device {rte_uuid_t device_id;/**< VMBUS device id */ rte_uuid_t class_id;/**< VMBUS device type */ uint32_t relid;/**< id for primary */ +uint16_t device_order;/**< Device order after probing */ uint8_t monitor_id;/**< monitor page */ int uio_num;/**< UIO device number */ uint32_t *int_page;/**< VMBUS interrupt page */ drivers/bus/vmbus/vmbus_common.c +0
-0
Is this an ABI change?
Quoted 4 lines · Stephen Hemminger
On Mon, 24 Jun 2024 11:04:15 +0000
Vladimir Ratnikov <[email protected]> wrote:
Quoted 15 lines
drivers/bus/vmbus/vmbus_common.c
Quoted 13 lines
drivers/bus/vmbus/bus_vmbus_driver.h +1
-0@@ -37,6 +37,7 @@ struct rte_vmbus_device {rte_uuid_t device_id;/**< VMBUS device id */ rte_uuid_t class_id;/**< VMBUS device type */ uint32_t relid;/**< id for primary */ +uint16_t device_order;/**< Device order after probing */ uint8_t monitor_id;/**< monitor page */ int uio_num;/**< UIO device number */ uint32_t *int_page;/**< VMBUS interrupt page */ drivers/bus/vmbus/vmbus_common.c +0
-0Is this an ABI change?
drivers/bus/vmbus/meson.build:driver_sdk_headers = files('bus_vmbus_driver.h')
Only drivers of this bus know the rte_vmbus_device object. So this patch does not impact the public ABI.
Yet, I fail to see what this patch is trying to achieve.
Signature · 1 line
David Marchand