Skip to contentSkip to conversation

pinctrl: cy8c95x0: Use cleanup.h

PATCH In review Patrick Rudolph 2 participants 4 messages Jun 26, 2024 – Jul 3, 2024

Subsystems (3)
lore
Share & tools
lore

Patrick Rudolph

author maintainer
#0 lore raw

PATCH 1/2 pinctrl: cy8c95x0: Use cleanup.h

Use the guard mutex from cleanup.h to make the code more readable.

---
 drivers/pinctrl/pinctrl-cy8c95x0.c | 13 ++++---------
 1 file changed, 4 insertions(+), 9 deletions(-)
drivers/pinctrl/pinctrl-cy8c95x0.c +4 -9
index 4efb8b5cc2d3..781949e0e09e 100644
@@ -9,6 +9,7 @@
 
 #include <linux/acpi.h>
 #include <linux/bitmap.h>
+#include <linux/cleanup.h>
 #include <linux/dmi.h>
 #include <linux/gpio/driver.h>
 #include <linux/gpio/consumer.h>
@@ -480,8 +481,6 @@ static inline int cy8c95x0_regmap_update_bits_base(struct cy8c95x0_pinctrl *chip
 	if (reg == CY8C95X0_PORTSEL)
 		return -EINVAL;
 
-	mutex_lock(&chip->i2c_lock);
-
 	/* Registers behind the PORTSEL mux have their own range in regmap */
 	if (cy8c95x0_muxed_register(reg)) {
 		off = CY8C95X0_MUX_REGMAP_TO_OFFSET(reg, port);
@@ -492,10 +491,11 @@ static inline int cy8c95x0_regmap_update_bits_base(struct cy8c95x0_pinctrl *chip
 		else
 			off = reg;
 	}
+	guard(mutex)(&chip->i2c_lock);
 
 	ret = regmap_update_bits_base(chip->regmap, off, mask, val, change, async, force);
 	if (ret < 0)
-		goto out;
+		return ret;
 
 	/* Update the cache when a WC bit is written */
 	if (cy8c95x0_wc_register(reg) && (mask & val)) {
@@ -516,8 +516,6 @@ static inline int cy8c95x0_regmap_update_bits_base(struct cy8c95x0_pinctrl *chip
 			regcache_cache_only(chip->regmap, false);
 		}
 	}
-out:
-	mutex_unlock(&chip->i2c_lock);
 
 	return ret;
 }
@@ -591,8 +589,6 @@ static int cy8c95x0_regmap_read(struct cy8c95x0_pinctrl *chip, unsigned int reg,
 {
 	int off, ret;
 
-	mutex_lock(&chip->i2c_lock);
-
 	/* Registers behind the PORTSEL mux have their own range in regmap */
 	if (cy8c95x0_muxed_register(reg)) {
 		off = CY8C95X0_MUX_REGMAP_TO_OFFSET(reg, port);
@@ -603,11 +599,10 @@ static int cy8c95x0_regmap_read(struct cy8c95x0_pinctrl *chip, unsigned int reg,
 		else
 			off = reg;
 	}
+	guard(mutex)(&chip->i2c_lock);
 
 	ret = regmap_read(chip->regmap, off, read_val);
 
-	mutex_unlock(&chip->i2c_lock);
-
 	return ret;
 }
 
Signature · 1 line
2.44.0
author maintainer
#1 lore raw

PATCH 2/2 pinctrl: cy8c95x0: Update cache modification

In the previous review cycle the regmap cache update code was questioned since it seems and odd way of using regmap_update_bits(). Thus update the regmap cache modification code to better explain what it does and why it's done. This is no functional change, but it's improving code maintainability.

---
 drivers/pinctrl/pinctrl-cy8c95x0.c | 22 +++++++++-------------
 1 file changed, 9 insertions(+), 13 deletions(-)
drivers/pinctrl/pinctrl-cy8c95x0.c +9 -13
index 781949e0e09e..9a92707d2525 100644
@@ -475,7 +475,7 @@ static inline int cy8c95x0_regmap_update_bits_base(struct cy8c95x0_pinctrl *chip
 						   bool *change, bool async,
 						   bool force)
 {
-	int ret, off, i, read_val;
+	int ret, off, i;
 
 	/* Caller should never modify PORTSEL directly */
 	if (reg == CY8C95X0_PORTSEL)
@@ -497,24 +497,20 @@ static inline int cy8c95x0_regmap_update_bits_base(struct cy8c95x0_pinctrl *chip
 	if (ret < 0)
 		return ret;
 
-	/* Update the cache when a WC bit is written */
+	/* Mimic what hardware does and update the cache when a WC bit is written.
+	 * Allows to mark the registers as non-volatile and reduces I/O cycles.
+	 */
 	if (cy8c95x0_wc_register(reg) && (mask & val)) {
+		/* Writing a 1 clears set bits in the other drive mode registers */
+		regcache_cache_only(chip->regmap, true);
 		for (i = CY8C95X0_DRV_PU; i <= CY8C95X0_DRV_HIZ; i++) {
 			if (i == reg)
 				continue;
-			off = CY8C95X0_MUX_REGMAP_TO_OFFSET(i, port);
-
-			ret = regmap_read(chip->regmap, off, &read_val);
-			if (ret < 0)
-				continue;
 
-			if (!(read_val & mask & val))
-				continue;
-
-			regcache_cache_only(chip->regmap, true);
-			regmap_update_bits(chip->regmap, off, mask & val, 0);
-			regcache_cache_only(chip->regmap, false);
+			off = CY8C95X0_MUX_REGMAP_TO_OFFSET(i, port);
+			regmap_clear_bits(chip->regmap, off, mask & val);
 		}
+		regcache_cache_only(chip->regmap, false);
 	}
 
 	return ret;
Signature · 1 line
2.44.0
#2 lore raw

Re: [PATCH 2/2] pinctrl: cy8c95x0: Update cache modification

Quoted 7 lines · Patrick Rudolph

In the previous review cycle the regmap cache update code was questioned since it seems and odd way of using regmap_update_bits(). Thus update the regmap cache modification code to better explain what it does and why it's done. This is no functional change, but it's improving code maintainability.

Patch applied.

Yours,
Linus Walleij