Skip to contentSkip to conversation

Correcting all needs work translations, Adding some transaltion and changing maintainer of the cpupower tool

PATCH New Daniel Hejduk 2 participants 12 messages Jun 27, 2024 – Jun 28, 2024 CPU power monitoring

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Correcting all needs work translations, Adding some transaltion and changing maintainer of the cpupower tool

---
 tools/power/cpupower/po/cs.mo | Bin 0 -> 12805 bytes
 tools/power/cpupower/po/cs.po | 172 ++++++++++++++++++----------------
 2 files changed, 91 insertions(+), 81 deletions(-)
 create mode 100644 tools/power/cpupower/po/cs.mo
tools/power/cpupower/po/cs.mo new file binary +0 -0
new file mode 100644
index 0000000000000000000000000000000000000000..e82a23760d4f26a628d9402f84c20bfda1df4263
GIT binary patch
tools/power/cpupower/po/cs.po +91 -81

468 lines not on this page · raw message

Signature · 1 line
2.45.2
#1 lore raw

PATCH 1/4 Signed-off-by: Daniel Hejduk <[email protected]>

Updating maintainer of the translation.

Last update to the po file is 5 years old. I will try to complete and maintain the translation.

---
 tools/power/cpupower/po/cs.mo | Bin 0 -> 12805 bytes
 tools/power/cpupower/po/cs.po |   6 +++---
 2 files changed, 3 insertions(+), 3 deletions(-)
 create mode 100644 tools/power/cpupower/po/cs.mo
tools/power/cpupower/po/cs.mo new file binary +0 -0
new file mode 100644
index 0000000000000000000000000000000000000000..e82a23760d4f26a628d9402f84c20bfda1df4263
GIT binary patch
tools/power/cpupower/po/cs.po +3 -3
index bfc7e1702..64fe78861 100644
@@ -4,14 +4,14 @@
 # Copyright (C) 2007 kavol
 # This file is distributed under the same license as the cpufrequtils package.
 #
-# Karel Volný <[email protected]>, 2007, 2008.
+# Daniel Hejduk <[email protected]> 2024.
 msgid ""
 msgstr ""
 "Project-Id-Version: cs\n"
 "Report-Msgid-Bugs-To: \n"
 "POT-Creation-Date: 2011-03-08 17:03+0100\n"
 "PO-Revision-Date: 2008-06-11 16:26+0200\n"
-"Last-Translator: Karel Volný <[email protected]>\n"
+"Last-Translator: Daniel Hejduk <[email protected]>\n"
 "Language-Team: Czech <[email protected]>\n"
 "Language: cs\n"
 "MIME-Version: 1.0\n"
@@ -217,7 +217,7 @@ msgstr ""
 msgid "Report errors and bugs to %s, please.\n"
 msgstr ""
 "Chyby v programu prosím hlaste na %s (anglicky).\n"
-"Chyby v překladu prosím hlaste na [email protected] (česky ;-)\n"
+"Chyby v překladu prosím hlaste na [email protected] (česky ;-)\n"
 
 #: utils/cpupower.c:114
 #, c-format
Signature · 1 line
2.45.2
maintainer
#2 lore raw

Re: [PATCH 1/4] Signed-off-by: Daniel Hejduk <[email protected]>

Quoted 9 lines · Daniel Hejduk

Updating maintainer of the translation.

Last update to the po file is 5 years old. I will try to complete and maintain the translation.

---
  tools/power/cpupower/po/cs.mo | Bin 0 -> 12805 bytes
  tools/power/cpupower/po/cs.po |   6 +++---
  2 files changed, 3 insertions(+), 3 deletions(-)

create mode 100644 tools/power/cpupower/po/cs.mo

There are multiple things to fix with this patch series.

1. Missing cover letter
2. Binary file included in the patch
3. Subject line doesn't include cpupower. See the format below
cpupower: -----
4. Change logs are missing are inadquate.
5. Missing version information - this is v2 series

Refer to submitting patches documents in the kernel docs.

Please fix all these problems and resend patches.

thanks,
-- Shuah

#3 lore raw

cover Updating maintainer and correcting Czech translation in cpupower

*** BLURB HERE ***

Daniel Hejduk (3):
Updating cpupower's Czech translation maintainer Correcting needs work strings and adding new to cpupower's Czech
translation
Adding changelog for cpupower

 tools/power/cpupower/ChangeLog |   3 +
 tools/power/cpupower/po/cs.po  | 174 +++++++++++++++++----------------
 2 files changed, 95 insertions(+), 82 deletions(-)
 create mode 100644 tools/power/cpupower/ChangeLog
Signature · 1 line
2.45.2
#4 lore raw

PATCH 1/3 Updating cpupower's Czech translation maintainer

The Czech translation is not maintained. I will maintain it.

---
 tools/power/cpupower/po/cs.po | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
tools/power/cpupower/po/cs.po +4 -4
index bfc7e1702..8956f00bc 100644
@@ -1,17 +1,17 @@
 # translation of cs.po to Czech
 # Czech translation for cpufrequtils package
 # Czech messages for cpufrequtils.
-# Copyright (C) 2007 kavol
+# Copyright (C) 2007 kavol, 2024 Daniel Hejduk
 # This file is distributed under the same license as the cpufrequtils package.
 #
-# Karel Volný <[email protected]>, 2007, 2008.
+# Karel Volný <[email protected]>, 2007, 2008, Daniel Hejduk 2024.
 msgid ""
 msgstr ""
 "Project-Id-Version: cs\n"
 "Report-Msgid-Bugs-To: \n"
 "POT-Creation-Date: 2011-03-08 17:03+0100\n"
 "PO-Revision-Date: 2008-06-11 16:26+0200\n"
-"Last-Translator: Karel Volný <[email protected]>\n"
+"Last-Translator: Daniel Hejduk <[email protected]>\n"
 "Language-Team: Czech <[email protected]>\n"
 "Language: cs\n"
 "MIME-Version: 1.0\n"
@@ -217,7 +217,7 @@ msgstr ""
 msgid "Report errors and bugs to %s, please.\n"
 msgstr ""
 "Chyby v programu prosím hlaste na %s (anglicky).\n"
-"Chyby v překladu prosím hlaste na [email protected] (česky ;-)\n"
+"Chyby v překladu prosím hlaste na [email protected] (česky ;-)\n"
 
 #: utils/cpupower.c:114
 #, c-format
Signature · 1 line
2.45.2
#5 lore raw

PATCH 2/3 Correcting needs work strings and adding new to cpupower's Czech translation

In reply to Daniel Hejduk

The translation was very poor probably translated by machine.

---
 tools/power/cpupower/po/cs.po | 166 ++++++++++++++++++----------------
 1 file changed, 88 insertions(+), 78 deletions(-)
tools/power/cpupower/po/cs.po +88 -78
index 8956f00bc..39f4ce65a 100644
@@ -10,43 +10,43 @@ msgstr ""
 "Project-Id-Version: cs\n"
 "Report-Msgid-Bugs-To: \n"
 "POT-Creation-Date: 2011-03-08 17:03+0100\n"
-"PO-Revision-Date: 2008-06-11 16:26+0200\n"
+"PO-Revision-Date: 2024-06-27 10:49+0200\n"
 "Last-Translator: Daniel Hejduk <[email protected]>\n"
 "Language-Team: Czech <[email protected]>\n"
 "Language: cs\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms:  nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-"X-Generator: KBabel 1.11.4\n"
+"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
+"X-Generator: Poedit 3.4.4\n"
 
 #: utils/idle_monitor/nhm_idle.c:36
 msgid "Processor Core C3"
-msgstr ""
+msgstr "Procesor Core C3"
 
 #: utils/idle_monitor/nhm_idle.c:43
 msgid "Processor Core C6"
-msgstr ""
+msgstr "Procesor Core C6"
 
 #: utils/idle_monitor/nhm_idle.c:51
 msgid "Processor Package C3"
-msgstr ""
+msgstr "Procesorový balíček C3"
 
 #: utils/idle_monitor/nhm_idle.c:58 utils/idle_monitor/amd_fam14h_idle.c:70
 msgid "Processor Package C6"
-msgstr ""
+msgstr "Procesorový balíček C6"
 
 #: utils/idle_monitor/snb_idle.c:33
 msgid "Processor Core C7"
-msgstr ""
+msgstr "Procesor Core C7"
 
 #: utils/idle_monitor/snb_idle.c:40
 msgid "Processor Package C2"
-msgstr ""
+msgstr "Procesorový balíček C2"
 
 #: utils/idle_monitor/snb_idle.c:47
 msgid "Processor Package C7"
-msgstr ""
+msgstr "Procesorový balíček C7"
 
 #: utils/idle_monitor/amd_fam14h_idle.c:56
 msgid "Package in sleep state (PC1 or deeper)"
@@ -54,7 +54,7 @@ msgstr ""
 
 #: utils/idle_monitor/amd_fam14h_idle.c:63
 msgid "Processor Package C1"
-msgstr ""
+msgstr "Procesorový balíček C1"
 
 #: utils/idle_monitor/amd_fam14h_idle.c:77
 msgid "North Bridge P1 boolean counter (returns 0 or 1)"
@@ -62,15 +62,15 @@ msgstr ""
 
 #: utils/idle_monitor/mperf_monitor.c:35
 msgid "Processor Core not idle"
-msgstr ""
+msgstr "Procesor Core není v klidovém stavu"
 
 #: utils/idle_monitor/mperf_monitor.c:42
 msgid "Processor Core in an idle state"
-msgstr ""
+msgstr "Procesor Core je v klidovém stavu"
 
 #: utils/idle_monitor/mperf_monitor.c:50
 msgid "Average Frequency (including boost) in MHz"
-msgstr ""
+msgstr "Průměrná frekvence (včetně boostu) v MHz"
 
 #: utils/idle_monitor/cpupower-monitor.c:66
 #, c-format
@@ -78,6 +78,8 @@ msgid ""
 "cpupower monitor: [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i "
 "interval_sec | -c command ...]\n"
 msgstr ""
+"cpupower monitor: [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i "
+"interní_sekundy | -c příkaz ...]\n"
 
 #: utils/idle_monitor/cpupower-monitor.c:69
 #, c-format
@@ -85,21 +87,23 @@ msgid ""
 "cpupower monitor: [-v] [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i "
 "interval_sec | -c command ...]\n"
 msgstr ""
+"cpupower monitor: [-v] [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i "
+"interní_sekundy | -c příkaz ...]\n"
 
 #: utils/idle_monitor/cpupower-monitor.c:71
 #, c-format
 msgid "\t -v: be more verbose\n"
-msgstr ""
+msgstr "\t -v: být víc upovídaný\n"
 
 #: utils/idle_monitor/cpupower-monitor.c:73
 #, c-format
 msgid "\t -h: print this help\n"
-msgstr ""
+msgstr "\t-h, --help: Vypíše tuto nápovědu\n"
 
 #: utils/idle_monitor/cpupower-monitor.c:74
 #, c-format
 msgid "\t -i: time interval to measure for in seconds (default 1)\n"
-msgstr ""
+msgstr "\t -i: časové intervaly pro měření v sekundách (výchozí 1)\n"
 
 #: utils/idle_monitor/cpupower-monitor.c:75
 #, c-format
@@ -222,7 +226,7 @@ msgstr ""
 #: utils/cpupower.c:114
 #, c-format
 msgid "Error parsing cpu list\n"
-msgstr ""
+msgstr "Chyba v parsování procesorového listu\n"
 
 #: utils/cpupower.c:172
 #, c-format
@@ -259,25 +263,25 @@ msgstr ""
 #: utils/cpufreq-info.c:163
 #, c-format
 msgid "    Supported: %s\n"
-msgstr ""
+msgstr "    Podporováno: %s\n"
 
 #: utils/cpufreq-info.c:163 utils/cpufreq-info.c:164
 msgid "yes"
-msgstr ""
+msgstr "ano"
 
 #: utils/cpufreq-info.c:163 utils/cpufreq-info.c:164
 msgid "no"
-msgstr ""
+msgstr "ne"
 
 #: utils/cpufreq-info.c:164
-#, fuzzy, c-format
+#, c-format
 msgid "    Active: %s\n"
-msgstr "  ovladač: %s\n"
+msgstr "    Aktivní: %s\n"
 
 #: utils/cpufreq-info.c:177
 #, c-format
 msgid "    Boost States: %d\n"
-msgstr ""
+msgstr "    Boostové stavy: %d\n"
 
 #: utils/cpufreq-info.c:178
 #, c-format
@@ -305,14 +309,14 @@ msgid "  driver: %s\n"
 msgstr "  ovladač: %s\n"
 
 #: utils/cpufreq-info.c:219
-#, fuzzy, c-format
+#, c-format
 msgid "  CPUs which run at the same hardware frequency: "
-msgstr "  CPU, které musí měnit frekvenci zároveň: "
+msgstr "  Procesory, které jsou na stejné hardwarové frekvenci: "
 
 #: utils/cpufreq-info.c:230
-#, fuzzy, c-format
+#, c-format
 msgid "  CPUs which need to have their frequency coordinated by software: "
-msgstr "  CPU, které musí měnit frekvenci zároveň: "
+msgstr "  Procesory, které musí mít jejich frekvenci ovládanou softwarem: "
 
 #: utils/cpufreq-info.c:241
 #, c-format
@@ -350,7 +354,7 @@ msgid ""
 "The governor \"%s\" may decide which speed to use\n"
 "                  within this range.\n"
 msgstr ""
-"  Regulátor \"%s\" může rozhodnout jakou frekvenci použít\n"
+"Regulátor \"%s\" může rozhodnout jakou frekvenci použít\n"
 "                    v těchto mezích.\n"
 
 #: utils/cpufreq-info.c:293
@@ -369,9 +373,9 @@ msgid "  cpufreq stats: "
 msgstr "  statistika cpufreq: "
 
 #: utils/cpufreq-info.c:472
-#, fuzzy, c-format
+#, c-format
 msgid "Usage: cpupower freqinfo [options]\n"
-msgstr "Užití: cpufreq-info [přepínače]\n"
+msgstr "Užití: cpupower freqinfo [přepínače]\n"
 
 #: utils/cpufreq-info.c:473 utils/cpufreq-set.c:26 utils/cpupower-set.c:23
 #: utils/cpupower-info.c:22 utils/cpuidle-info.c:148
@@ -380,7 +384,7 @@ msgid "Options:\n"
 msgstr "Přepínače:\n"
 
 #: utils/cpufreq-info.c:474
-#, fuzzy, c-format
+#, c-format
 msgid "  -e, --debug          Prints out debug information [default]\n"
 msgstr "  -e, --debug          Vypíše ladicí informace\n"
 
@@ -427,20 +431,21 @@ msgid "  -g, --governors      Determines available cpufreq governors *\n"
 msgstr "  -g, --governors      Zjistí dostupné regulátory cpufreq *\n"
 
 #: utils/cpufreq-info.c:483
-#, fuzzy, c-format
+#, c-format
 msgid ""
 "  -r, --related-cpus   Determines which CPUs run at the same hardware "
 "frequency *\n"
 msgstr ""
-"  -a, --affected-cpus  Zjistí, které CPU musí měnit frekvenci zároveň *\n"
+"  -r, --related-cpus  Zjistí, které procesory jsou na stejné frekvenci *\n"
 
 #: utils/cpufreq-info.c:484
-#, fuzzy, c-format
+#, c-format
 msgid ""
 "  -a, --affected-cpus  Determines which CPUs need to have their frequency\n"
 "                       coordinated by software *\n"
 msgstr ""
-"  -a, --affected-cpus  Zjistí, které CPU musí měnit frekvenci zároveň *\n"
+"  -a, --affected-cpus  Zjistí, které procesory musí mít svoji frekvenci\n"
+"                       ovládanou softwarem *\n"
 
 #: utils/cpufreq-info.c:486
 #, c-format
@@ -448,13 +453,13 @@ msgid "  -s, --stats          Shows cpufreq statistics if available\n"
 msgstr "  -s, --stats          Zobrazí statistiku cpufreq, je-li dostupná\n"
 
 #: utils/cpufreq-info.c:487
-#, fuzzy, c-format
+#, c-format
 msgid ""
 "  -y, --latency        Determines the maximum latency on CPU frequency "
 "changes *\n"
 msgstr ""
-"  -l, --hwlimits       Zjistí minimální a maximální dostupnou frekvenci CPU "
-"*\n"
+"  -y, --latency        Zjistí maximální latenci na změně procesorové "
+"frekvence *\n"
 
 #: utils/cpufreq-info.c:488
 #, c-format
@@ -468,16 +473,17 @@ msgid ""
 "cpufreq\n"
 "                       interface in 2.4. and early 2.6. kernels\n"
 msgstr ""
-"  -o, --proc           Vypíše informace ve formátu, jaký používalo rozhraní\n"
+"  -o, --proc           Vypíše informace ve formátu, jaký používalo "
+"rozhraní\n"
 "                       /proc/cpufreq v kernelech řady 2.4 a časné 2.6\n"
 
 #: utils/cpufreq-info.c:491
-#, fuzzy, c-format
+#, c-format
 msgid ""
 "  -m, --human          human-readable output for the -f, -w, -s and -y "
 "parameters\n"
 msgstr ""
-"  -m, --human          Výstup parametrů -f, -w a -s v „lidmi čitelném“ "
+"  -m, --human          Výstup parametrů -f, -w a -s a -y v „lidmi čitelném“ "
 "formátu\n"
 
 #: utils/cpufreq-info.c:492 utils/cpuidle-info.c:152
@@ -488,12 +494,14 @@ msgstr "  -h, --help           Vypíše tuto nápovědu\n"
 #: utils/cpufreq-info.c:495
 #, c-format
 msgid ""
-"If no argument or only the -c, --cpu parameter is given, debug output about\n"
+"If no argument or only the -c, --cpu parameter is given, debug output "
+"about\n"
 "cpufreq is printed which is useful e.g. for reporting bugs.\n"
 msgstr ""
 "Není-li zadán žádný parametr nebo je-li zadán pouze přepínač -c, --cpu, "
 "jsou\n"
-"vypsány ladicí informace, což může být užitečné například při hlášení chyb.\n"
+"vypsány ladicí informace, což může být užitečné například při hlášení "
+"chyb.\n"
 
 #: utils/cpufreq-info.c:497
 #, c-format
@@ -509,7 +517,8 @@ msgstr ""
 msgid ""
 "The argument passed to this tool can't be combined with passing a --cpu "
 "argument\n"
-msgstr "Zadaný parametr nemůže být použit zároveň s přepínačem -c nebo --cpu\n"
+msgstr ""
+"Zadaný parametr nemůže být použit zároveň s přepínačem -c nebo --cpu\n"
 
 #: utils/cpufreq-info.c:596
 #, c-format
@@ -537,9 +546,9 @@ msgid "analyzing CPU %d:\n"
 msgstr "analyzuji CPU %d:\n"
 
 #: utils/cpufreq-set.c:25
-#, fuzzy, c-format
+#, c-format
 msgid "Usage: cpupower frequency-set [options]\n"
-msgstr "Užití: cpufreq-set [přepínače]\n"
+msgstr "Užití: cpupower frequency-set [přepínače]\n"
 
 #: utils/cpufreq-set.c:27
 #, c-format
@@ -567,7 +576,8 @@ msgstr "  -g GOV, --governors GOV  Nový regulátor cpufreq\n"
 #: utils/cpufreq-set.c:30
 #, c-format
 msgid ""
-"  -f FREQ, --freq FREQ     specific frequency to be set. Requires userspace\n"
+"  -f FREQ, --freq FREQ     specific frequency to be set. Requires "
+"userspace\n"
 "                           governor to be available and loaded\n"
 msgstr ""
 "  -f FREQ, --freq FREQ     Frekvence, která má být nastavena. Vyžaduje, aby "
@@ -580,21 +590,22 @@ msgid "  -r, --related            Switches all hardware-related CPUs\n"
 msgstr ""
 
 #: utils/cpufreq-set.c:33 utils/cpupower-set.c:28 utils/cpupower-info.c:27
-#, fuzzy, c-format
+#, c-format
 msgid "  -h, --help               Prints out this screen\n"
 msgstr "  -h, --help           Vypíše tuto nápovědu\n"
 
 #: utils/cpufreq-set.c:35
-#, fuzzy, c-format
+#, c-format
 msgid ""
 "Notes:\n"
-"1. Omitting the -c or --cpu argument is equivalent to setting it to \"all\"\n"
+"1. Omitting the -c or --cpu argument is equivalent to setting it to "
+"\"all\"\n"
 msgstr ""
-"Není-li při použití přepínačů označených * zadán parametr -c nebo --cpu,\n"
-"předpokládá se jeho hodnota 0.\n"
+"Poznámky:\n"
+"1. Vynechání -c nebo --cpu přepínače je ekvivalent na nastavení \"all\"\n"
 
 #: utils/cpufreq-set.c:37
-#, fuzzy, c-format
+#, c-format
 msgid ""
 "2. The -f FREQ, --freq FREQ parameter cannot be combined with any other "
 "parameter\n"
@@ -603,12 +614,11 @@ msgid ""
 "   by postfixing the value with the wanted unit name, without any space\n"
 "   (FREQuency in kHz =^ Hz * 0.001 =^ MHz * 1000 =^ GHz * 1000000).\n"
 msgstr ""
-"Poznámky:\n"
-"1. Vynechání parametru -c nebo --cpu je ekvivalentní jeho nastavení na 0\n"
 "2. Přepínač -f nebo --freq nemůže být použit zároveň s žádným jiným vyjma -"
 "c\n"
 "   nebo --cpu\n"
-"3. Frekvence (FREQ) mohou být zadány v Hz, kHz (výchozí), MHz, GHz nebo THz\n"
+"3. Frekvence (FREQ) mohou být zadány v Hz, kHz (výchozí), MHz, GHz nebo "
+"THz\n"
 "   připojením názvu jednotky bez mezery mezi číslem a jednotkou\n"
 "   (FREQ v kHz =^ Hz * 0,001 = ^ MHz * 1000 =^ GHz * 1000000)\n"
 
@@ -659,7 +669,7 @@ msgstr ""
 #: utils/cpufreq-set.c:347
 #, c-format
 msgid "Setting cpu: %d\n"
-msgstr ""
+msgstr "Nastavuji procesor:%d\n"
 
 #: utils/cpupower-set.c:22
 #, c-format
@@ -729,9 +739,9 @@ msgid ""
 msgstr ""
 
 #: utils/cpupower-info.c:25
-#, fuzzy, c-format
+#, c-format
 msgid "  -m, --sched-mc     Gets the kernel's multi core scheduler policy.\n"
-msgstr "  -p, --policy         Zjistí aktuální taktiku cpufreq *\n"
+msgstr "  -m, --sched-mc     Zjistí pravidla pro multi jádrové plánování\n"
 
 #: utils/cpupower-info.c:26
 #, c-format
@@ -783,9 +793,9 @@ msgid "perf-bias: %d\n"
 msgstr ""
 
 #: utils/cpuidle-info.c:28
-#, fuzzy, c-format
+#, c-format
 msgid "Analyzing CPU %d:\n"
-msgstr "analyzuji CPU %d:\n"
+msgstr "Analyzování procesoru %d:\n"
 
 #: utils/cpuidle-info.c:32
 #, c-format
@@ -808,9 +818,9 @@ msgid "Number of idle states: %d\n"
 msgstr ""
 
 #: utils/cpuidle-info.c:48
-#, fuzzy, c-format
+#, c-format
 msgid "Available idle states:"
-msgstr "  dostupné frekvence: "
+msgstr "Dostupné frekvence:"
 
 #: utils/cpuidle-info.c:71
 #, c-format
@@ -820,7 +830,7 @@ msgstr ""
 #: utils/cpuidle-info.c:74
 #, c-format
 msgid "Latency: %lu\n"
-msgstr ""
+msgstr "Latence: %lu\n"
 
 #: utils/cpuidle-info.c:76
 #, c-format
@@ -838,9 +848,9 @@ msgid "Could not determine cpuidle driver\n"
 msgstr ""
 
 #: utils/cpuidle-info.c:94
-#, fuzzy, c-format
+#, c-format
 msgid "CPUidle driver: %s\n"
-msgstr "  ovladač: %s\n"
+msgstr "ovladač: %s\n"
 
 #: utils/cpuidle-info.c:99
 #, c-format
@@ -876,7 +886,7 @@ msgstr ""
 #: utils/cpuidle-info.c:130
 #, c-format
 msgid "states:\t\n"
-msgstr ""
+msgstr "stavy:\t\n"
 
 #: utils/cpuidle-info.c:132
 #, c-format
@@ -904,31 +914,31 @@ msgid "duration[%020Lu] \n"
 msgstr ""
 
 #: utils/cpuidle-info.c:147
-#, fuzzy, c-format
+#, c-format
 msgid "Usage: cpupower idleinfo [options]\n"
-msgstr "Užití: cpufreq-info [přepínače]\n"
+msgstr "Užití: cpupower idleinfo [přepínače]\n"
 
 #: utils/cpuidle-info.c:149
-#, fuzzy, c-format
+#, c-format
 msgid "  -s, --silent         Only show general C-state information\n"
-msgstr "  -e, --debug          Vypíše ladicí informace\n"
+msgstr "  -s, --silent          Ukáže pouze základní informace o C-stavech\n"
 
 #: utils/cpuidle-info.c:150
-#, fuzzy, c-format
+#, c-format
 msgid ""
 "  -o, --proc           Prints out information like provided by the /proc/"
 "acpi/processor/*/power\n"
 "                       interface in older kernels\n"
 msgstr ""
-"  -o, --proc           Vypíše informace ve formátu, jaký používalo rozhraní\n"
-"                       /proc/cpufreq v kernelech řady 2.4 a časné 2.6\n"
+"  -o, --proc           Vypíše informace které jsou obsaženy v /proc/acpi/"
+"processor/*/power\n"
+"                       rozhraní ve starších verzích jádra\n"
 
 #: utils/cpuidle-info.c:209
-#, fuzzy, c-format
+#, c-format
 msgid "You can't specify more than one output-specific argument\n"
 msgstr ""
-"Nelze zadat více než jeden parametr -c nebo --cpu\n"
-"anebo více než jeden parametr určující výstup\n"
+"Nemůžeš specifikovat více jak jeden přepínač pro nastavování vypisování\n"
 
 #~ msgid ""
 #~ "  -c CPU, --cpu CPU    CPU number which information shall be determined "
Signature · 1 line
2.45.2
#6 lore raw

PATCH 3/3 Adding changelog for cpupower

In reply to Daniel Hejduk

I am also writing about the Czech translation change into the Changelog

---
 tools/power/cpupower/ChangeLog | 3 +++
 1 file changed, 3 insertions(+)
 create mode 100644 tools/power/cpupower/ChangeLog
tools/power/cpupower/ChangeLog new file +3 -0
new file mode 100644
index 000000000..d8f16e469
@@ -0,0 +1,3 @@
+Version 6.10.0-rc5 (2024-06-28)
+==========
+* Corrected needs work strings and added new in Czech Translation
Signature · 1 line
2.45.2
maintainer
#7 lore raw

Re: [PATCH 0/3] Updating maintainer and correcting Czech translation in cpupower

In reply to Daniel Hejduk
Quoted 1 line · Daniel Hejduk

*** BLURB HERE ***

Explain what this patch series does.

Quoted 6 lines

Daniel Hejduk (3):
Updating cpupower's Czech translation maintainer Correcting needs work strings and adding new to cpupower's Czech
translation
Adding changelog for cpupower

short summary format is wrong. Refer to commits in the kernel rep for reference on how to write summary and commit logs.

Quoted 5 lines
  tools/power/cpupower/ChangeLog |   3 +
  tools/power/cpupower/po/cs.po  | 174 +++++++++++++++++----------------
  2 files changed, 95 insertions(+), 82 deletions(-)

create mode 100644 tools/power/cpupower/ChangeLog

thanks,
-- Shuah

#8 lore raw

cover Updating maintainer and correcting Czech translation in cpupower

This is series that fixes a lot of strings in Czech translation of cpupower.

1st patch is updating maintainer of the translation to me. 2nd patch is correcting the strings of the translation and adding new one.
3rd patch is adding changelog.

Daniel Hejduk (3):
Updating cpupower's Czech translation maintainer Correcting needs work strings and adding new to cpupower's Czech
translation
Adding changelog for cpupower

 tools/power/cpupower/ChangeLog |   3 +
 tools/power/cpupower/po/cs.po  | 174 +++++++++++++++++----------------
 2 files changed, 95 insertions(+), 82 deletions(-)
 create mode 100644 tools/power/cpupower/ChangeLog
Signature · 1 line
2.45.2
#9 lore raw

PATCH 2/4 Signed-off-by: Daniel Hejduk <[email protected]>

In reply to Daniel Hejduk

Fixing needs work strings and adding new strings

This translation is just uncomplete, the translation was probably done by program. I fixed it all.

---
 tools/power/cpupower/po/cs.po | 162 ++++++++++++++++++----------------
 1 file changed, 86 insertions(+), 76 deletions(-)
tools/power/cpupower/po/cs.po +86 -76
index 64fe78861..8c6e254a1 100644
@@ -18,35 +18,35 @@ msgstr ""
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms:  nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-"X-Generator: KBabel 1.11.4\n"
+"X-Generator: Poedit 3.4.4\n"
 
 #: utils/idle_monitor/nhm_idle.c:36
 msgid "Processor Core C3"
-msgstr ""
+msgstr "Procesor Core C3"
 
 #: utils/idle_monitor/nhm_idle.c:43
 msgid "Processor Core C6"
-msgstr ""
+msgstr "Procesor Core C6"
 
 #: utils/idle_monitor/nhm_idle.c:51
 msgid "Processor Package C3"
-msgstr ""
+msgstr "Procesorový balíček C3"
 
 #: utils/idle_monitor/nhm_idle.c:58 utils/idle_monitor/amd_fam14h_idle.c:70
 msgid "Processor Package C6"
-msgstr ""
+msgstr "Procesorový balíček C6"
 
 #: utils/idle_monitor/snb_idle.c:33
 msgid "Processor Core C7"
-msgstr ""
+msgstr "Procesor Core C7"
 
 #: utils/idle_monitor/snb_idle.c:40
 msgid "Processor Package C2"
-msgstr ""
+msgstr "Procesorový balíček C2"
 
 #: utils/idle_monitor/snb_idle.c:47
 msgid "Processor Package C7"
-msgstr ""
+msgstr "Procesorový balíček C7"
 
 #: utils/idle_monitor/amd_fam14h_idle.c:56
 msgid "Package in sleep state (PC1 or deeper)"
@@ -54,7 +54,7 @@ msgstr ""
 
 #: utils/idle_monitor/amd_fam14h_idle.c:63
 msgid "Processor Package C1"
-msgstr ""
+msgstr "Procesorový balíček C1"
 
 #: utils/idle_monitor/amd_fam14h_idle.c:77
 msgid "North Bridge P1 boolean counter (returns 0 or 1)"
@@ -62,15 +62,15 @@ msgstr ""
 
 #: utils/idle_monitor/mperf_monitor.c:35
 msgid "Processor Core not idle"
-msgstr ""
+msgstr "Procesor Core není v klidovém stavu"
 
 #: utils/idle_monitor/mperf_monitor.c:42
 msgid "Processor Core in an idle state"
-msgstr ""
+msgstr "Procesor Core je v klidovém stavu"
 
 #: utils/idle_monitor/mperf_monitor.c:50
 msgid "Average Frequency (including boost) in MHz"
-msgstr ""
+msgstr "Průměrná frekvence (včetně boostu) v MHz"
 
 #: utils/idle_monitor/cpupower-monitor.c:66
 #, c-format
@@ -78,6 +78,8 @@ msgid ""
 "cpupower monitor: [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i "
 "interval_sec | -c command ...]\n"
 msgstr ""
+"cpupower monitor: [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i "
+"interní_sekundy | -c příkaz ...]\n"
 
 #: utils/idle_monitor/cpupower-monitor.c:69
 #, c-format
@@ -85,21 +87,23 @@ msgid ""
 "cpupower monitor: [-v] [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i "
 "interval_sec | -c command ...]\n"
 msgstr ""
+"cpupower monitor: [-v] [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i "
+"interní_sekundy | -c příkaz ...]\n"
 
 #: utils/idle_monitor/cpupower-monitor.c:71
 #, c-format
 msgid "\t -v: be more verbose\n"
-msgstr ""
+msgstr "\t -v: být víc upovídaný\n"
 
 #: utils/idle_monitor/cpupower-monitor.c:73
 #, c-format
 msgid "\t -h: print this help\n"
-msgstr ""
+msgstr "\t-h, --help: Vypíše tuto nápovědu\n"
 
 #: utils/idle_monitor/cpupower-monitor.c:74
 #, c-format
 msgid "\t -i: time interval to measure for in seconds (default 1)\n"
-msgstr ""
+msgstr "\t -i: časové intervaly pro měření v sekundách (výchozí 1)\n"
 
 #: utils/idle_monitor/cpupower-monitor.c:75
 #, c-format
@@ -222,7 +226,7 @@ msgstr ""
 #: utils/cpupower.c:114
 #, c-format
 msgid "Error parsing cpu list\n"
-msgstr ""
+msgstr "Chyba v parsování procesorového listu\n"
 
 #: utils/cpupower.c:172
 #, c-format
@@ -259,25 +263,25 @@ msgstr ""
 #: utils/cpufreq-info.c:163
 #, c-format
 msgid "    Supported: %s\n"
-msgstr ""
+msgstr "    Podporováno: %s\n"
 
 #: utils/cpufreq-info.c:163 utils/cpufreq-info.c:164
 msgid "yes"
-msgstr ""
+msgstr "ano"
 
 #: utils/cpufreq-info.c:163 utils/cpufreq-info.c:164
 msgid "no"
-msgstr ""
+msgstr "ne"
 
 #: utils/cpufreq-info.c:164
-#, fuzzy, c-format
+#, c-format
 msgid "    Active: %s\n"
-msgstr "  ovladač: %s\n"
+msgstr "    Aktivní: %s\n"
 
 #: utils/cpufreq-info.c:177
 #, c-format
 msgid "    Boost States: %d\n"
-msgstr ""
+msgstr "    Boostové stavy: %d\n"
 
 #: utils/cpufreq-info.c:178
 #, c-format
@@ -305,14 +309,14 @@ msgid "  driver: %s\n"
 msgstr "  ovladač: %s\n"
 
 #: utils/cpufreq-info.c:219
-#, fuzzy, c-format
+#, c-format
 msgid "  CPUs which run at the same hardware frequency: "
-msgstr "  CPU, které musí měnit frekvenci zároveň: "
+msgstr "  Procesory, které jsou na stejné hardwarové frekvenci: "
 
 #: utils/cpufreq-info.c:230
-#, fuzzy, c-format
+#, c-format
 msgid "  CPUs which need to have their frequency coordinated by software: "
-msgstr "  CPU, které musí měnit frekvenci zároveň: "
+msgstr "  Procesory, které musí mít jejich frekvenci ovládanou softwarem: "
 
 #: utils/cpufreq-info.c:241
 #, c-format
@@ -350,7 +354,7 @@ msgid ""
 "The governor \"%s\" may decide which speed to use\n"
 "                  within this range.\n"
 msgstr ""
-"  Regulátor \"%s\" může rozhodnout jakou frekvenci použít\n"
+"Regulátor \"%s\" může rozhodnout jakou frekvenci použít\n"
 "                    v těchto mezích.\n"
 
 #: utils/cpufreq-info.c:293
@@ -369,9 +373,9 @@ msgid "  cpufreq stats: "
 msgstr "  statistika cpufreq: "
 
 #: utils/cpufreq-info.c:472
-#, fuzzy, c-format
+#, c-format
 msgid "Usage: cpupower freqinfo [options]\n"
-msgstr "Užití: cpufreq-info [přepínače]\n"
+msgstr "Užití: cpupower freqinfo [přepínače]\n"
 
 #: utils/cpufreq-info.c:473 utils/cpufreq-set.c:26 utils/cpupower-set.c:23
 #: utils/cpupower-info.c:22 utils/cpuidle-info.c:148
@@ -380,7 +384,7 @@ msgid "Options:\n"
 msgstr "Přepínače:\n"
 
 #: utils/cpufreq-info.c:474
-#, fuzzy, c-format
+#, c-format
 msgid "  -e, --debug          Prints out debug information [default]\n"
 msgstr "  -e, --debug          Vypíše ladicí informace\n"
 
@@ -427,20 +431,21 @@ msgid "  -g, --governors      Determines available cpufreq governors *\n"
 msgstr "  -g, --governors      Zjistí dostupné regulátory cpufreq *\n"
 
 #: utils/cpufreq-info.c:483
-#, fuzzy, c-format
+#, c-format
 msgid ""
 "  -r, --related-cpus   Determines which CPUs run at the same hardware "
 "frequency *\n"
 msgstr ""
-"  -a, --affected-cpus  Zjistí, které CPU musí měnit frekvenci zároveň *\n"
+"  -r, --related-cpus  Zjistí, které procesory jsou na stejné frekvenci *\n"
 
 #: utils/cpufreq-info.c:484
-#, fuzzy, c-format
+#, c-format
 msgid ""
 "  -a, --affected-cpus  Determines which CPUs need to have their frequency\n"
 "                       coordinated by software *\n"
 msgstr ""
-"  -a, --affected-cpus  Zjistí, které CPU musí měnit frekvenci zároveň *\n"
+"  -a, --affected-cpus  Zjistí, které procesory musí mít svoji frekvenci\n"
+"                       ovládanou softwarem *\n"
 
 #: utils/cpufreq-info.c:486
 #, c-format
@@ -448,13 +453,13 @@ msgid "  -s, --stats          Shows cpufreq statistics if available\n"
 msgstr "  -s, --stats          Zobrazí statistiku cpufreq, je-li dostupná\n"
 
 #: utils/cpufreq-info.c:487
-#, fuzzy, c-format
+#, c-format
 msgid ""
 "  -y, --latency        Determines the maximum latency on CPU frequency "
 "changes *\n"
 msgstr ""
-"  -l, --hwlimits       Zjistí minimální a maximální dostupnou frekvenci CPU "
-"*\n"
+"  -y, --latency        Zjistí maximální latenci na změně procesorové "
+"frekvence *\n"
 
 #: utils/cpufreq-info.c:488
 #, c-format
@@ -468,16 +473,17 @@ msgid ""
 "cpufreq\n"
 "                       interface in 2.4. and early 2.6. kernels\n"
 msgstr ""
-"  -o, --proc           Vypíše informace ve formátu, jaký používalo rozhraní\n"
+"  -o, --proc           Vypíše informace ve formátu, jaký používalo "
+"rozhraní\n"
 "                       /proc/cpufreq v kernelech řady 2.4 a časné 2.6\n"
 
 #: utils/cpufreq-info.c:491
-#, fuzzy, c-format
+#, c-format
 msgid ""
 "  -m, --human          human-readable output for the -f, -w, -s and -y "
 "parameters\n"
 msgstr ""
-"  -m, --human          Výstup parametrů -f, -w a -s v „lidmi čitelném“ "
+"  -m, --human          Výstup parametrů -f, -w a -s a -y v „lidmi čitelném“ "
 "formátu\n"
 
 #: utils/cpufreq-info.c:492 utils/cpuidle-info.c:152
@@ -488,12 +494,14 @@ msgstr "  -h, --help           Vypíše tuto nápovědu\n"
 #: utils/cpufreq-info.c:495
 #, c-format
 msgid ""
-"If no argument or only the -c, --cpu parameter is given, debug output about\n"
+"If no argument or only the -c, --cpu parameter is given, debug output "
+"about\n"
 "cpufreq is printed which is useful e.g. for reporting bugs.\n"
 msgstr ""
 "Není-li zadán žádný parametr nebo je-li zadán pouze přepínač -c, --cpu, "
 "jsou\n"
-"vypsány ladicí informace, což může být užitečné například při hlášení chyb.\n"
+"vypsány ladicí informace, což může být užitečné například při hlášení "
+"chyb.\n"
 
 #: utils/cpufreq-info.c:497
 #, c-format
@@ -509,7 +517,8 @@ msgstr ""
 msgid ""
 "The argument passed to this tool can't be combined with passing a --cpu "
 "argument\n"
-msgstr "Zadaný parametr nemůže být použit zároveň s přepínačem -c nebo --cpu\n"
+msgstr ""
+"Zadaný parametr nemůže být použit zároveň s přepínačem -c nebo --cpu\n"
 
 #: utils/cpufreq-info.c:596
 #, c-format
@@ -537,9 +546,9 @@ msgid "analyzing CPU %d:\n"
 msgstr "analyzuji CPU %d:\n"
 
 #: utils/cpufreq-set.c:25
-#, fuzzy, c-format
+#, c-format
 msgid "Usage: cpupower frequency-set [options]\n"
-msgstr "Užití: cpufreq-set [přepínače]\n"
+msgstr "Užití: cpupower frequency-set [přepínače]\n"
 
 #: utils/cpufreq-set.c:27
 #, c-format
@@ -567,7 +576,8 @@ msgstr "  -g GOV, --governors GOV  Nový regulátor cpufreq\n"
 #: utils/cpufreq-set.c:30
 #, c-format
 msgid ""
-"  -f FREQ, --freq FREQ     specific frequency to be set. Requires userspace\n"
+"  -f FREQ, --freq FREQ     specific frequency to be set. Requires "
+"userspace\n"
 "                           governor to be available and loaded\n"
 msgstr ""
 "  -f FREQ, --freq FREQ     Frekvence, která má být nastavena. Vyžaduje, aby "
@@ -580,21 +590,22 @@ msgid "  -r, --related            Switches all hardware-related CPUs\n"
 msgstr ""
 
 #: utils/cpufreq-set.c:33 utils/cpupower-set.c:28 utils/cpupower-info.c:27
-#, fuzzy, c-format
+#, c-format
 msgid "  -h, --help               Prints out this screen\n"
 msgstr "  -h, --help           Vypíše tuto nápovědu\n"
 
 #: utils/cpufreq-set.c:35
-#, fuzzy, c-format
+#, c-format
 msgid ""
 "Notes:\n"
-"1. Omitting the -c or --cpu argument is equivalent to setting it to \"all\"\n"
+"1. Omitting the -c or --cpu argument is equivalent to setting it to "
+"\"all\"\n"
 msgstr ""
-"Není-li při použití přepínačů označených * zadán parametr -c nebo --cpu,\n"
-"předpokládá se jeho hodnota 0.\n"
+"Poznámky:\n"
+"1. Vynechání -c nebo --cpu přepínače je ekvivalent na nastavení \"all\"\n"
 
 #: utils/cpufreq-set.c:37
-#, fuzzy, c-format
+#, c-format
 msgid ""
 "2. The -f FREQ, --freq FREQ parameter cannot be combined with any other "
 "parameter\n"
@@ -603,12 +614,11 @@ msgid ""
 "   by postfixing the value with the wanted unit name, without any space\n"
 "   (FREQuency in kHz =^ Hz * 0.001 =^ MHz * 1000 =^ GHz * 1000000).\n"
 msgstr ""
-"Poznámky:\n"
-"1. Vynechání parametru -c nebo --cpu je ekvivalentní jeho nastavení na 0\n"
 "2. Přepínač -f nebo --freq nemůže být použit zároveň s žádným jiným vyjma -"
 "c\n"
 "   nebo --cpu\n"
-"3. Frekvence (FREQ) mohou být zadány v Hz, kHz (výchozí), MHz, GHz nebo THz\n"
+"3. Frekvence (FREQ) mohou být zadány v Hz, kHz (výchozí), MHz, GHz nebo "
+"THz\n"
 "   připojením názvu jednotky bez mezery mezi číslem a jednotkou\n"
 "   (FREQ v kHz =^ Hz * 0,001 = ^ MHz * 1000 =^ GHz * 1000000)\n"
 
@@ -659,7 +669,7 @@ msgstr ""
 #: utils/cpufreq-set.c:347
 #, c-format
 msgid "Setting cpu: %d\n"
-msgstr ""
+msgstr "Nastavuji procesor:%d\n"
 
 #: utils/cpupower-set.c:22
 #, c-format
@@ -729,9 +739,9 @@ msgid ""
 msgstr ""
 
 #: utils/cpupower-info.c:25
-#, fuzzy, c-format
+#, c-format
 msgid "  -m, --sched-mc     Gets the kernel's multi core scheduler policy.\n"
-msgstr "  -p, --policy         Zjistí aktuální taktiku cpufreq *\n"
+msgstr "  -m, --sched-mc     Zjistí pravidla pro multi jádrové plánování\n"
 
 #: utils/cpupower-info.c:26
 #, c-format
@@ -783,9 +793,9 @@ msgid "perf-bias: %d\n"
 msgstr ""
 
 #: utils/cpuidle-info.c:28
-#, fuzzy, c-format
+#, c-format
 msgid "Analyzing CPU %d:\n"
-msgstr "analyzuji CPU %d:\n"
+msgstr "Analyzování procesoru %d:\n"
 
 #: utils/cpuidle-info.c:32
 #, c-format
@@ -808,9 +818,9 @@ msgid "Number of idle states: %d\n"
 msgstr ""
 
 #: utils/cpuidle-info.c:48
-#, fuzzy, c-format
+#, c-format
 msgid "Available idle states:"
-msgstr "  dostupné frekvence: "
+msgstr "Dostupné frekvence:"
 
 #: utils/cpuidle-info.c:71
 #, c-format
@@ -820,7 +830,7 @@ msgstr ""
 #: utils/cpuidle-info.c:74
 #, c-format
 msgid "Latency: %lu\n"
-msgstr ""
+msgstr "Latence: %lu\n"
 
 #: utils/cpuidle-info.c:76
 #, c-format
@@ -838,9 +848,9 @@ msgid "Could not determine cpuidle driver\n"
 msgstr ""
 
 #: utils/cpuidle-info.c:94
-#, fuzzy, c-format
+#, c-format
 msgid "CPUidle driver: %s\n"
-msgstr "  ovladač: %s\n"
+msgstr "ovladač: %s\n"
 
 #: utils/cpuidle-info.c:99
 #, c-format
@@ -876,7 +886,7 @@ msgstr ""
 #: utils/cpuidle-info.c:130
 #, c-format
 msgid "states:\t\n"
-msgstr ""
+msgstr "stavy:\t\n"
 
 #: utils/cpuidle-info.c:132
 #, c-format
@@ -904,31 +914,31 @@ msgid "duration[%020Lu] \n"
 msgstr ""
 
 #: utils/cpuidle-info.c:147
-#, fuzzy, c-format
+#, c-format
 msgid "Usage: cpupower idleinfo [options]\n"
-msgstr "Užití: cpufreq-info [přepínače]\n"
+msgstr "Užití: cpupower idleinfo [přepínače]\n"
 
 #: utils/cpuidle-info.c:149
-#, fuzzy, c-format
+#, c-format
 msgid "  -s, --silent         Only show general C-state information\n"
-msgstr "  -e, --debug          Vypíše ladicí informace\n"
+msgstr "  -s, --silent          Ukáže pouze základní informace o C-stavech\n"
 
 #: utils/cpuidle-info.c:150
-#, fuzzy, c-format
+#, c-format
 msgid ""
 "  -o, --proc           Prints out information like provided by the /proc/"
 "acpi/processor/*/power\n"
 "                       interface in older kernels\n"
 msgstr ""
-"  -o, --proc           Vypíše informace ve formátu, jaký používalo rozhraní\n"
-"                       /proc/cpufreq v kernelech řady 2.4 a časné 2.6\n"
+"  -o, --proc           Vypíše informace které jsou obsaženy v /proc/acpi/"
+"processor/*/power\n"
+"                       rozhraní ve starších verzích jádra\n"
 
 #: utils/cpuidle-info.c:209
-#, fuzzy, c-format
+#, c-format
 msgid "You can't specify more than one output-specific argument\n"
 msgstr ""
-"Nelze zadat více než jeden parametr -c nebo --cpu\n"
-"anebo více než jeden parametr určující výstup\n"
+"Nemůžeš specifikovat více jak jeden přepínač pro nastavování vypisování\n"
 
 #~ msgid ""
 #~ "  -c CPU, --cpu CPU    CPU number which information shall be determined "
Signature · 1 line
2.45.2
#10 lore raw

PATCH 3/4 Signed-off-by: Daniel Hejduk <[email protected]>

In reply to Daniel Hejduk

Fixing revision

Whoops I forgot to add the new date.

---
 tools/power/cpupower/po/cs.po | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
tools/power/cpupower/po/cs.po +1 -1
index 8c6e254a1..0441b34f8 100644
@@ -10,7 +10,7 @@ msgstr ""
 "Project-Id-Version: cs\n"
 "Report-Msgid-Bugs-To: \n"
 "POT-Creation-Date: 2011-03-08 17:03+0100\n"
-"PO-Revision-Date: 2008-06-11 16:26+0200\n"
+"PO-Revision-Date: 2024-06-27 10:49+0200\n"
 "Last-Translator: Daniel Hejduk <[email protected]>\n"
 "Language-Team: Czech <[email protected]>\n"
 "Language: cs\n"
Signature · 1 line
2.45.2
#11 lore raw

PATCH 4/4 Signed-off-by: Daniel Hejduk <[email protected]>

In reply to Daniel Hejduk

Adding ChangeLog

---
 tools/power/cpupower/ChangeLog | 4 ++++
 1 file changed, 4 insertions(+)
 create mode 100644 tools/power/cpupower/ChangeLog
tools/power/cpupower/ChangeLog new file +4 -0
new file mode 100644
index 000000000..e05c8a21b
@@ -0,0 +1,4 @@
+2024-06-28  Daniel Hejduk <[email protected]>
+		* Changing maintainer to Daniel Hejduk
+		* Fixing all needs work strings
+		* Adding some strings
Signature · 1 line
2.45.2