hwmon: (max6639) : Add DT support
PATCH 1/1 hwmon: (max6639) : Add DT support
Remove platform data & add devicetree support.
--- drivers/hwmon/max6639.c | 99 ++++++++++++++++++++------- include/linux/platform_data/max6639.h | 15 ---- 2 files changed, 73 insertions(+), 41 deletions(-) delete mode 100644 include/linux/platform_data/max6639.h
drivers/hwmon/max6639.c +73 -26
@@ -19,7 +19,6 @@#include <linux/hwmon-sysfs.h> #include <linux/err.h> #include <linux/mutex.h> -#include <linux/platform_data/max6639.h> #include <linux/regmap.h> #include <linux/util_macros.h>
@@ -81,6 +80,7 @@ struct max6639_data {/* Register values initialized only once */ u8 ppr[MAX6639_NUM_CHANNELS ];/* Pulses per rotation 0..3 for 1..4 ppr */ u8 rpm_range[MAX6639_NUM_CHANNELS ];/* Index in above rpm_ranges table */ +bool fan_enable[MAX6639_NUM_CHANNELS ];/* Optional regulator for FAN supply */ struct regulator *reg;
@@ -276,6 +276,11 @@ static int max6639_write_fan(struct device *dev, u32 attr, int channel,static umode_t max6639_fan_is_visible (const void *_data,u32 attr,int channel) { +struct max6639_data *data = (struct max6639_data *)_data; + +if (!data->fan_enable[channel]) +return 0 ; +switch (attr) {case hwmon_fan_input:case hwmon_fan_fault:
@@ -372,6 +377,11 @@ static int max6639_write_pwm(struct device *dev, u32 attr, int channel,static umode_t max6639_pwm_is_visible (const void *_data,u32 attr,int channel) { +struct max6639_data *data = (struct max6639_data *)_data; + +if (!data->fan_enable[channel]) +return 0 ; +switch (attr) {case hwmon_pwm_input:case hwmon_pwm_freq:
@@ -544,43 +554,85 @@ static int rpm_range_to_reg(int range)int i;for (i =0 ; i <ARRAY_SIZE (rpm_ranges); i++) { -if (rpm_ranges[i] == range) +if (range <= rpm_ranges[i])return i; }return 1 ;/* default: 4000 RPM */ } +static int max6639_probe_child_from_dt (struct i2c_client *client, +struct device_node *child, +struct max6639_data *data) + +{ +struct device *dev = &client->dev; +u32 i, val; +int err; + + err =of_property_read_u32 (child,"reg" , &i); +if (err) { +dev_err (dev,"missing reg property of %pOFn\n" , child); +return err; + } + +if (i >1 ) { +dev_err (dev,"Invalid fan index reg %d\n" , i); +return -EINVAL ; + } + + data->fan_enable[i] = true; + + err =of_property_read_u32 (child,"pulses-per-revolution" , &val); + +if (!err) { +if (val <0 || val >5 ) { +dev_err (dev,"invalid pulses-per-revolution %d of %pOFn\n" , val, child); +return -EINVAL ; + } + data->ppr[i] = val; + } + + err =of_property_read_u32 (child,"max-rpm" , &val); + +if (!err) + data->rpm_range[i] =rpm_range_to_reg (val); + +return 0 ; +} +static int max6639_init_client (struct i2c_client *client,struct max6639_data *data) { -struct max6639_platform_data *max6639_info = -dev_get_platdata (&client->dev); -int i; -int rpm_range =1 ;/* default: 4000 RPM */ -int err, ppr; +struct device *dev = &client->dev; +const struct device_node *np = dev->of_node; +struct device_node *child; +int i, err;/* Reset chip to default values, see below for GCONFIG setup */ err =regmap_write (data->regmap,MAX6639_REG_GCONFIG ,MAX6639_GCONFIG_POR );if (err)return err; -/* Fans pulse per revolution is 2 by default */ -if (max6639_info && max6639_info->ppr >0 && - max6639_info->ppr <5 ) - ppr = max6639_info->ppr; -else - ppr =2 ; - - data->ppr[0 ] = ppr; - data->ppr[1 ] = ppr; +for_each_child_of_node (np, child) { +if (strcmp (child->name,"fan" )) +continue ; -if (max6639_info) - rpm_range =rpm_range_to_reg (max6639_info->rpm_range); - data->rpm_range[0 ] = rpm_range; - data->rpm_range[1 ] = rpm_range; + err =max6639_probe_child_from_dt (client, child, data); +if (err) { +of_node_put (child); +return err; + } + }for (i =0 ; i <MAX6639_NUM_CHANNELS ; i++) { +if (!data->fan_enable[i]) + err =regmap_set_bits (data->regmap,MAX6639_REG_OUTPUT_MASK ,BIT (1 - i)); +else + err =regmap_clear_bits (data->regmap,MAX6639_REG_OUTPUT_MASK ,BIT (1 - i)); +if (err) +return err; +/* Set Fan pulse per revolution */ err =max6639_set_ppr (data, i, data->ppr[i]);if (err)
@@ -593,12 +645,7 @@ static int max6639_init_client(struct i2c_client *client,return err;/* Fans PWM polarity high by default */ -if (max6639_info) { -if (max6639_info->pwm_polarity ==0 ) - err =regmap_write (data->regmap,MAX6639_REG_FAN_CONFIG2a (i),0x00 ); -else - err =regmap_write (data->regmap,MAX6639_REG_FAN_CONFIG2a (i),0x02 ); - } + err =regmap_write (data->regmap,MAX6639_REG_FAN_CONFIG2a (i),0x00 );if (err)return err;
include/linux/platform_data/max6639.h deleted +0 -15
@@ -1,15 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _LINUX_MAX6639_H -#define _LINUX_MAX6639_H - -#include <linux/types.h> - -/* platform data for the MAX6639 temperature sensor and fan control */ - -struct max6639_platform_data { -bool pwm_polarity;/* Polarity low (0) or high (1, default) */ -int ppr;/* Pulses per rotation 1..4 (default == 2) */ -int rpm_range;/* 2000, 4000 (default), 8000 or 16000 */ -}; - -#endif /* _LINUX_MAX6639_H */
base-commit: 52c1e818d66bfed276bd371f9e7947be4055af87
Signature · 1 line
2.42.0
Guenter Roeck
maintainerQuoted 2 lines · Naresh Solanki
Remove platform data & add devicetree support.
Unless I am missing something, this doesn't just add devicetree support, it actually _mandates_ devicetree support. There are no defaults. That is not acceptable.
More comments inline.
Quoted 52 lines
Signed-off-by Naresh Solanki <[email protected]>--- drivers/hwmon/max6639.c | 99 ++++++++++++++++++++------- include/linux/platform_data/max6639.h | 15 ---- 2 files changed, 73 insertions(+), 41 deletions(-)delete mode 100644
include/linux/platform_data/max6639.hdrivers/hwmon/max6639.c +11
-1@@ -19,7 +19,6 @@#include <linux/hwmon-sysfs.h> #include <linux/err.h> #include <linux/mutex.h> -#include <linux/platform_data/max6639.h> #include <linux/regmap.h> #include <linux/util_macros.h> @@ -81,6 +80,7 @@ struct max6639_data {/* Register values initialized only once */ u8 ppr[MAX6639_NUM_CHANNELS ];/* Pulses per rotation 0..3 for 1..4 ppr */ u8 rpm_range[MAX6639_NUM_CHANNELS ];/* Index in above rpm_ranges table */ +bool fan_enable[MAX6639_NUM_CHANNELS ];/* Optional regulator for FAN supply */ struct regulator *reg;@@ -276,6 +276,11 @@ static int max6639_write_fan(struct device *dev, u32 attr, int channel,static umode_t max6639_fan_is_visible (const void *_data,u32 attr,int channel) { +struct max6639_data *data = (struct max6639_data *)_data; + +if (!data->fan_enable[channel]) +return 0 ; +switch (attr) {case hwmon_fan_input:case hwmon_fan_fault:@@ -372,6 +377,11 @@ static int max6639_write_pwm(struct device *dev, u32 attr, int channel,static umode_t max6639_pwm_is_visible (const void *_data,u32 attr,int channel) { +struct max6639_data *data = (struct max6639_data *)_data; + +if (!data->fan_enable[channel]) +return 0 ; +switch (attr) {case hwmon_pwm_input:case hwmon_pwm_freq:
drivers/hwmon/max6639.c static int rpm_range_to_reg(int range) · line 557
Quoted 5 lines
drivers/hwmon/max6639.c +1
-1@@ -544,43 +554,85 @@ static int rpm_range_to_reg(int range)int i;for (i =0 ; i <ARRAY_SIZE (rpm_ranges); i++) { -if (rpm_ranges[i] == range) +if (range <= rpm_ranges[i])
What does this change have to do with adding devicetree support, why is it done, and what is its impact ?
So far the assumption was that only valid values would be accepted by the function, returning a default if there was no match. The incoming data is from devicetree, where the range should be well defined and accurate. With that in mind, I don't see the point of accepting values outside the supported ranges.
Flexible data makes sense for sysfs attributes, where we can not expect users to know acceptable values. For those, it is acceptable and even desirable to find a closest match. However, that does not apply to data obtained from devicetree.
Quoted 22 lines
drivers/hwmon/max6639.c +16
-0return i; }return 1 ;/* default: 4000 RPM */ } +static int max6639_probe_child_from_dt (struct i2c_client *client, +struct device_node *child, +struct max6639_data *data) + +{ +struct device *dev = &client->dev; +u32 i, val; +int err; + + err =of_property_read_u32 (child,"reg" , &i); +if (err) { +dev_err (dev,"missing reg property of %pOFn\n" , child); +return err; + } + +if (i >1 ) {
drivers/hwmon/max6639.c static int rpm_range_to_reg(int range) · line 589
Quoted 10 lines
drivers/hwmon/max6639.c +10
-0+dev_err (dev,"Invalid fan index reg %d\n" , i); +return -EINVAL ; + } + + data->fan_enable[i] = true; + + err =of_property_read_u32 (child,"pulses-per-revolution" , &val); + +if (!err) { +if (val <0 || val >5 ) {
Accepting 0 seems wrong. Also, val is u32 and will never be < 0.
Quoted 31 lines
drivers/hwmon/max6639.c +18
-5+dev_err (dev,"invalid pulses-per-revolution %d of %pOFn\n" , val, child); +return -EINVAL ; + } + data->ppr[i] = val; + } + + err =of_property_read_u32 (child,"max-rpm" , &val); + +if (!err) + data->rpm_range[i] =rpm_range_to_reg (val); + +return 0 ; +} +static int max6639_init_client (struct i2c_client *client,struct max6639_data *data) { -struct max6639_platform_data *max6639_info = -dev_get_platdata (&client->dev); -int i; -int rpm_range =1 ;/* default: 4000 RPM */ -int err, ppr; +struct device *dev = &client->dev; +const struct device_node *np = dev->of_node; +struct device_node *child; +int i, err;/* Reset chip to default values, see below for GCONFIG setup */ err =regmap_write (data->regmap,MAX6639_REG_GCONFIG ,MAX6639_GCONFIG_POR );if (err)return err;
drivers/hwmon/max6639.c static int rpm_range_to_reg(int range) · line 576
Quoted 10 lines
drivers/hwmon/max6639.c +0
-9-/* Fans pulse per revolution is 2 by default */ -if (max6639_info && max6639_info->ppr >0 && - max6639_info->ppr <5 ) - ppr = max6639_info->ppr; -else - ppr =2 ; - - data->ppr[0 ] = ppr; - data->ppr[1 ] = ppr;
As mentioned above, this may work for your use case, but it won't work for existing users of this driver.
Quoted 63 lines
drivers/hwmon/max6639.c +17
-10+for_each_child_of_node (np, child) { +if (strcmp (child->name,"fan" )) +continue ; -if (max6639_info) - rpm_range =rpm_range_to_reg (max6639_info->rpm_range); - data->rpm_range[0 ] = rpm_range; - data->rpm_range[1 ] = rpm_range; + err =max6639_probe_child_from_dt (client, child, data); +if (err) { +of_node_put (child); +return err; + } + }for (i =0 ; i <MAX6639_NUM_CHANNELS ; i++) { +if (!data->fan_enable[i]) + err =regmap_set_bits (data->regmap,MAX6639_REG_OUTPUT_MASK ,BIT (1 - i)); +else + err =regmap_clear_bits (data->regmap,MAX6639_REG_OUTPUT_MASK ,BIT (1 - i)); +if (err) +return err; +/* Set Fan pulse per revolution */ err =max6639_set_ppr (data, i, data->ppr[i]);if (err)@@ -593,12 +645,7 @@ static int max6639_init_client(struct i2c_client *client,return err;/* Fans PWM polarity high by default */ -if (max6639_info) { -if (max6639_info->pwm_polarity ==0 ) - err =regmap_write (data->regmap,MAX6639_REG_FAN_CONFIG2a (i),0x00 ); -else - err =regmap_write (data->regmap,MAX6639_REG_FAN_CONFIG2a (i),0x02 ); - } + err =regmap_write (data->regmap,MAX6639_REG_FAN_CONFIG2a (i),0x00 );if (err)return err;include/linux/platform_data/max6639.h deleted +0
-15@@ -1,15 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _LINUX_MAX6639_H -#define _LINUX_MAX6639_H - -#include <linux/types.h> - -/* platform data for the MAX6639 temperature sensor and fan control */ - -struct max6639_platform_data { -bool pwm_polarity;/* Polarity low (0) or high (1, default) */ -int ppr;/* Pulses per rotation 1..4 (default == 2) */ -int rpm_range;/* 2000, 4000 (default), 8000 or 16000 */ -}; - -#endif /* _LINUX_MAX6639_H */ base-commit:
52c1e818d66bfed276bd371f9e7947be4055af87
Hi Guenter,
Sorry for the late reply,
Quoted 8 lines · Guenter Roeck
Quoted 2 lines · Naresh Solanki
Remove platform data & add devicetree support.
Unless I am missing something, this doesn't just add devicetree support, it actually _mandates_ devicetree support. There are no defaults. That is not acceptable.
I agree with you. It is best to have some defaults & then overwrite based on DT properties.
But in that case we would have to assume that all fans are enabled irrespective of their hardware connections in the schematics(example fan_enable).
I'm not sure if that is fine. But if you feel that is alright then I'll rewrite the driver to assume
everything is enabled with default values.
Later based on DT properties, we just overwrite defaults to align with hardware.
For commit message I'll update it as :
hwmon: (max6639) : Configure based on DT property
Remove platform data & initialize driver with defaults & overwrite based on DT properties.
Quoted 70 lines
More comments inline.
Quoted 52 lines
Signed-off-by Naresh Solanki <[email protected]>--- drivers/hwmon/max6639.c | 99 ++++++++++++++++++++------- include/linux/platform_data/max6639.h | 15 ---- 2 files changed, 73 insertions(+), 41 deletions(-)delete mode 100644
include/linux/platform_data/max6639.hdrivers/hwmon/max6639.c +11
-1@@ -19,7 +19,6 @@#include <linux/hwmon-sysfs.h> #include <linux/err.h> #include <linux/mutex.h> -#include <linux/platform_data/max6639.h> #include <linux/regmap.h> #include <linux/util_macros.h> @@ -81,6 +80,7 @@ struct max6639_data {/* Register values initialized only once */ u8 ppr[MAX6639_NUM_CHANNELS ];/* Pulses per rotation 0..3 for 1..4 ppr */ u8 rpm_range[MAX6639_NUM_CHANNELS ];/* Index in above rpm_ranges table */ +bool fan_enable[MAX6639_NUM_CHANNELS ];/* Optional regulator for FAN supply */ struct regulator *reg;@@ -276,6 +276,11 @@ static int max6639_write_fan(struct device *dev, u32 attr, int channel,static umode_t max6639_fan_is_visible (const void *_data,u32 attr,int channel) { +struct max6639_data *data = (struct max6639_data *)_data; + +if (!data->fan_enable[channel]) +return 0 ; +switch (attr) {case hwmon_fan_input:case hwmon_fan_fault:@@ -372,6 +377,11 @@ static int max6639_write_pwm(struct device *dev, u32 attr, int channel,static umode_t max6639_pwm_is_visible (const void *_data,u32 attr,int channel) { +struct max6639_data *data = (struct max6639_data *)_data; + +if (!data->fan_enable[channel]) +return 0 ; +switch (attr) {case hwmon_pwm_input:case hwmon_pwm_freq:drivers/hwmon/max6639.c static int rpm_range_to_reg(int range) · line 557
Quoted 5 lines
drivers/hwmon/max6639.c +1
-1@@ -544,43 +554,85 @@ static int rpm_range_to_reg(int range)int i;for (i =0 ; i <ARRAY_SIZE (rpm_ranges); i++) { -if (rpm_ranges[i] == range) +if (range <= rpm_ranges[i])What does this change have to do with adding devicetree support, why is it done, and what is its impact ?
So far the assumption was that only valid values would be accepted by the function, returning a default if there was no match. The incoming data is from devicetree, where the range should be well defined and accurate. With that in mind, I don't see the point of accepting values outside the supported ranges.
Quoted 4 lines
Flexible data makes sense for sysfs attributes, where we can not expect users to know acceptable values. For those, it is acceptable and even desirable to find a closest match. However, that does not apply to data obtained from devicetree.
Agree. Will remove this change.
Quoted 27 lines
Quoted 27 lines
drivers/hwmon/max6639.c +20
-0return i; }return 1 ;/* default: 4000 RPM */ } +static int max6639_probe_child_from_dt (struct i2c_client *client, +struct device_node *child, +struct max6639_data *data) + +{ +struct device *dev = &client->dev; +u32 i, val; +int err; + + err =of_property_read_u32 (child,"reg" , &i); +if (err) { +dev_err (dev,"missing reg property of %pOFn\n" , child); +return err; + } + +if (i >1 ) { +dev_err (dev,"Invalid fan index reg %d\n" , i); +return -EINVAL ; + } +
Quoted 8 lines
drivers/hwmon/max6639.c static int rpm_range_to_reg(int range) · line 589
Quoted 6 lines
drivers/hwmon/max6639.c +6
-0+ data->fan_enable[i] = true; + + err =of_property_read_u32 (child,"pulses-per-revolution" , &val); + +if (!err) { +if (val <0 || val >5 ) {Accepting 0 seems wrong. Also, val is u32 and will never be < 0.
Ack.
Will make variable 'i' as int.
Also will update if check with:
if (val < 1 || val > 5) {
Quoted 33 lines
Quoted 33 lines
drivers/hwmon/max6639.c +18
-5+dev_err (dev,"invalid pulses-per-revolution %d of %pOFn\n" , val, child); +return -EINVAL ; + } + data->ppr[i] = val; + } + + err =of_property_read_u32 (child,"max-rpm" , &val); + +if (!err) + data->rpm_range[i] =rpm_range_to_reg (val); + +return 0 ; +} +static int max6639_init_client (struct i2c_client *client,struct max6639_data *data) { -struct max6639_platform_data *max6639_info = -dev_get_platdata (&client->dev); -int i; -int rpm_range =1 ;/* default: 4000 RPM */ -int err, ppr; +struct device *dev = &client->dev; +const struct device_node *np = dev->of_node; +struct device_node *child; +int i, err;/* Reset chip to default values, see below for GCONFIG setup */ err =regmap_write (data->regmap,MAX6639_REG_GCONFIG ,MAX6639_GCONFIG_POR );if (err)return err;
Quoted 12 lines
drivers/hwmon/max6639.c static int rpm_range_to_reg(int range) · line 576
Quoted 9 lines
drivers/hwmon/max6639.c +0
-9-/* Fans pulse per revolution is 2 by default */ -if (max6639_info && max6639_info->ppr >0 && - max6639_info->ppr <5 ) - ppr = max6639_info->ppr; -else - ppr =2 ; - - data->ppr[0 ] = ppr; - data->ppr[1 ] = ppr;As mentioned above, this may work for your use case, but it won't work for existing users of this driver.
Somewhere I was with the assumption that there is no active use of the driver as there is no reference to this driver.
That is why I felt these changes will be good.
i.e., DT property would indicate if Fan0 or Fan1 should be enabled or not instead of assuming that they are always enabled.
I would need your input here to proceed further.
Regards,
Naresh
Quoted 65 lines
Quoted 64 lines
drivers/hwmon/max6639.c +17
-10+for_each_child_of_node (np, child) { +if (strcmp (child->name,"fan" )) +continue ; -if (max6639_info) - rpm_range =rpm_range_to_reg (max6639_info->rpm_range); - data->rpm_range[0 ] = rpm_range; - data->rpm_range[1 ] = rpm_range; + err =max6639_probe_child_from_dt (client, child, data); +if (err) { +of_node_put (child); +return err; + } + }for (i =0 ; i <MAX6639_NUM_CHANNELS ; i++) { +if (!data->fan_enable[i]) + err =regmap_set_bits (data->regmap,MAX6639_REG_OUTPUT_MASK ,BIT (1 - i)); +else + err =regmap_clear_bits (data->regmap,MAX6639_REG_OUTPUT_MASK ,BIT (1 - i)); +if (err) +return err; +/* Set Fan pulse per revolution */ err =max6639_set_ppr (data, i, data->ppr[i]);if (err)@@ -593,12 +645,7 @@ static int max6639_init_client(struct i2c_client *client,return err;/* Fans PWM polarity high by default */ -if (max6639_info) { -if (max6639_info->pwm_polarity ==0 ) - err =regmap_write (data->regmap,MAX6639_REG_FAN_CONFIG2a (i),0x00 ); -else - err =regmap_write (data->regmap,MAX6639_REG_FAN_CONFIG2a (i),0x02 ); - } + err =regmap_write (data->regmap,MAX6639_REG_FAN_CONFIG2a (i),0x00 );if (err)return err;include/linux/platform_data/max6639.h deleted +0
-15@@ -1,15 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _LINUX_MAX6639_H -#define _LINUX_MAX6639_H - -#include <linux/types.h> - -/* platform data for the MAX6639 temperature sensor and fan control */ - -struct max6639_platform_data { -bool pwm_polarity;/* Polarity low (0) or high (1, default) */ -int ppr;/* Pulses per rotation 1..4 (default == 2) */ -int rpm_range;/* 2000, 4000 (default), 8000 or 16000 */ -}; - -#endif /* _LINUX_MAX6639_H */ base-commit:
52c1e818d66bfed276bd371f9e7947be4055af87
Guenter Roeck
maintainerQuoted 19 lines · Naresh Solanki
Hi Guenter,
Sorry for the late reply,
Quoted 8 lines · Guenter Roeck
Quoted 2 lines · Naresh Solanki
Remove platform data & add devicetree support.
Unless I am missing something, this doesn't just add devicetree support, it actually _mandates_ devicetree support. There are no defaults. That is not acceptable.
I agree with you. It is best to have some defaults & then overwrite based on DT properties.
But in that case we would have to assume that all fans are enabled irrespective of their hardware connections in theschematics(example fan_enable).
Quoted 3 lines
I'm not sure if that is fine. But if you feel that is alright then I'll rewrite the driver to assume
everything is enabled with default values.
That would still be a functional change, or am I missing something ? It would overwrite any configuration written by a BIOS/ROMMON.
Guenter
Hi Guenter,
Quoted 21 lines · Guenter Roeck
Quoted 19 lines · Naresh Solanki
Hi Guenter,
Sorry for the late reply,
Quoted 8 lines · Guenter Roeck
Quoted 2 lines · Naresh Solanki
Remove platform data & add devicetree support.
Unless I am missing something, this doesn't just add devicetree support, it actually _mandates_ devicetree support. There are no defaults. That is not acceptable.
I agree with you. It is best to have some defaults & then overwrite based on DT properties.
But in that case we would have to assume that all fans are enabled irrespective of their hardware connections in theschematics(example fan_enable).
Quoted 6 lines
Quoted 3 lines
I'm not sure if that is fine. But if you feel that is alright then I'll rewrite the driver to assume
everything is enabled with default values.That would still be a functional change, or am I missing something ? It would overwrite any configuration written by a BIOS/ROMMON.
With that, driver would take the current chip configuration as default & just configure specific config specified in DT(if any) & continue with initialization?
This can keep into account the Chip defaults, BIOS written configuration & even DT.
Is this what you mean ?
If yes then I'll align the driver accordingly.
Please let me know if I understood your intent correctly & any other thoughts on this.
Regards,
Naresh
Quoted 3 lines
Guenter
Guenter Roeck
maintainerQuoted 28 lines · Naresh Solanki
Hi Guenter,
Quoted 25 lines · Guenter Roeck
Quoted 22 lines · Naresh Solanki
Hi Guenter,
Sorry for the late reply,
Quoted 8 lines · Guenter Roeck
Quoted 2 lines · Naresh Solanki
Remove platform data & add devicetree support.
Unless I am missing something, this doesn't just add devicetree support, it actually _mandates_ devicetree support. There are no defaults. That is not acceptable.
I agree with you. It is best to have some defaults & then overwrite based on DT properties.
But in that case we would have to assume that all fans are enabled irrespective of their hardware connections in theschematics(example fan_enable).I'm not sure if that is fine. But if you feel that is alright then I'll rewrite the driver to assume
everything is enabled with default values.
Quoted 5 lines
Quoted 2 lines
That would still be a functional change, or am I missing something ? It would overwrite any configuration written by a BIOS/ROMMON.
With that, driver would take the current chip configuration as default & just configure specific config specified in DT(if any) & continue with initialization?
Yes.
Thanks,
Guenter