sunxi, usb: UDC/DM gadget model support
Subsystems (2)
v2 cover sunxi, usb: UDC/DM gadget model support
Happy Thursday, U-Boot list!
Here is attempt 2 at making this USB controller driver compatible with DM's gadget model, following what most of the other musb variants do.
v2 removes the unwanted printfs in the probe func, per feedback from Marek. I received no other feedback against v1 of this patch.
Cheers,
Sam
Sam Edwards (2):
usb: musb-new: sunxi: remove unwanted printfs
usb: musb-new: sunxi: make compatible with UDC/DM gadget model
drivers/usb/musb-new/sunxi.c | 52 +++++++++++++++++++++--------------- 1 file changed, 31 insertions(+), 21 deletions(-)
Signature · 1 line
2.39.2
PATCH v2 1/2 usb: musb-new: sunxi: remove unwanted printfs
Per Marek's feedback, unconditional printfs in the probe function of this USB controller driver should be removed.
This patch also slightly tidies up the return path, in preparation for DM support.
--- drivers/usb/musb-new/sunxi.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-)
drivers/usb/musb-new/sunxi.c +2 -6
@@ -494,19 +494,15 @@ static int musb_usb_probe(struct udevice *dev)if (!host->host)return -EIO ; - ret =musb_lowlevel_init (host); -if (!ret) -printf ("Allwinner mUSB OTG (Host)\n" ); +return musb_lowlevel_init (host);#else pdata.mode =MUSB_PERIPHERAL ; host->host =musb_register (&pdata, &glue->dev, base);if (IS_ERR_OR_NULL (host->host))return -EIO ; -printf ("Allwinner mUSB OTG (Peripheral)\n" ); +return 0 ;#endif - -return ret; }static int musb_usb_remove (struct udevice *dev)
Signature · 1 line
2.39.2
PATCH v2 2/2 usb: musb-new: sunxi: make compatible with UDC/DM gadget model
In reply to Sam EdwardsSince many sunxi boards do not implement a board_usb_init, it's better if we just make the sunxi USB driver compatible with the DM gadget model, as many other musb-new variants already are.
This change has been verified working on a T113s.
--- drivers/usb/musb-new/sunxi.c | 50 +++++++++++++++++++++++------------- 1 file changed, 32 insertions(+), 18 deletions(-)
drivers/usb/musb-new/sunxi.c +32 -18
@@ -444,6 +444,16 @@ static struct musb_hdrc_config musb_config_h3 = { .ram_bits = SUNXI_MUSB_RAM_BITS, }; +#if CONFIG_IS_ENABLED (DM_USB_GADGET ) +int dm_usb_gadget_handle_interrupts (struct udevice *dev) { +struct sunxi_glue *glue =dev_get_priv (dev); +struct musb_host_data *host = &glue->mdata; + + host->host->isr (0 , host->host); +return 0 ; +} +#endif +static int musb_usb_probe (struct udevice *dev) {struct sunxi_glue *glue =dev_get_priv (dev);
@@ -452,10 +462,6 @@ static int musb_usb_probe(struct udevice *dev)void *base =dev_read_addr_ptr (dev);int ret; -#ifdef CONFIG_USB_MUSB_HOST -struct usb_bus_priv *priv =dev_get_uclass_priv (dev); -#endif -if (!base)return -EINVAL ;
@@ -486,23 +492,31 @@ static int musb_usb_probe(struct udevice *dev) pdata.platform_ops = &sunxi_musb_ops; pdata.config = glue->cfg->config; -#ifdef CONFIG_USB_MUSB_HOST - priv->desc_before_addr = true; +if (IS_ENABLED (CONFIG_USB_MUSB_HOST )) { +struct usb_bus_priv *priv =dev_get_uclass_priv (dev); + priv->desc_before_addr = true; - pdata.mode =MUSB_HOST ; - host->host =musb_init_controller (&pdata, &glue->dev, base); -if (!host->host) -return -EIO ; + pdata.mode =MUSB_HOST ; + host->host =musb_init_controller (&pdata, &glue->dev, base); +if (!host->host) +return -EIO ; -return musb_lowlevel_init (host); -#else - pdata.mode =MUSB_PERIPHERAL ; - host->host =musb_register (&pdata, &glue->dev, base); -if (IS_ERR_OR_NULL (host->host)) -return -EIO ; +return musb_lowlevel_init (host); + }else if (CONFIG_IS_ENABLED (DM_USB_GADGET )) { + pdata.mode =MUSB_PERIPHERAL ; + host->host =musb_init_controller (&pdata, &glue->dev, base); +if (!host->host) +return -EIO ; -return 0 ; -#endif +return usb_add_gadget_udc (&glue->dev, &host->host->g); + }else { + pdata.mode =MUSB_PERIPHERAL ; + host->host =musb_register (&pdata, &glue->dev, base); +if (IS_ERR_OR_NULL (host->host)) +return -EIO ; + +return 0 ; + } }static int musb_usb_remove (struct udevice *dev)
Signature · 1 line
2.39.2
Re: [PATCH v2 2/2] usb: musb-new: sunxi: make compatible with UDC/DM gadget model
On Thu, 8 Jun 2023 13:56:31 -0600
Sam Edwards <[email protected]> wrote:
Hi,
John asked me have a look at this.
Quoted 1 line
Since many sunxi boards do not implement a
board_usb_init, it's
I am confused, what has this have to do with gadget support? *No* sunxi board build provides board_usb_init(), but apparently this works fine for now.
I am all for this converting to DM part, but the rationale seems a bit off.
Also can you give some reason for this patch? What does this fix or improve? "it's better" is a bit thin, "complying with DM" would already be sufficient, but maybe there is more?
Quoted 15 lines
better if we just make the sunxi USB driver compatible with the DM gadget model, as many other musb-new variants already are.
This change has been verified working on a T113s.
Signed-off-by Sam Edwards <[email protected]>--- drivers/usb/musb-new/sunxi.c | 50 +++++++++++++++++++++++------------- 1 file changed, 32 insertions(+), 18 deletions(-)drivers/usb/musb-new/sunxi.c +0
-0
drivers/usb/musb-new/sunxi.c static struct musb_hdrc_config musb_config_h3 = { · line 447
Quoted 4 lines
drivers/usb/musb-new/sunxi.c +1
-0@@ -444,6 +444,16 @@ static struct musb_hdrc_config musb_config_h3 = { .ram_bits = SUNXI_MUSB_RAM_BITS, }; +#if CONFIG_IS_ENABLED (DM_USB_GADGET )
Please no more #ifdef's. Is there any reason to *not* force DM_USB_GADGET now, for all sunxi boards, in Kconfig?
Either by "select"ing it in the USB Kconfig, or in arch/arm/Kconfig, like other platforms do.
Then you don't need to care about the !DM_USB_GADGET definition of this function and can drop the #ifdef.
drivers/usb/musb-new/sunxi.c static struct musb_hdrc_config musb_config_h3 = { · line 448
Quoted 1 line
drivers/usb/musb-new/sunxi.c +1
-0+int dm_usb_gadget_handle_interrupts (struct udevice *dev) {
coding style
Quoted 55 lines
drivers/usb/musb-new/sunxi.c +21
-17+struct sunxi_glue *glue =dev_get_priv (dev); +struct musb_host_data *host = &glue->mdata; + + host->host->isr (0 , host->host); + return 0; +} +#endif +static int musb_usb_probe (struct udevice *dev) {struct sunxi_glue *glue =dev_get_priv (dev);@@ -452,10 +462,6 @@ static int musb_usb_probe(struct udevice *dev)void *base =dev_read_addr_ptr (dev);int ret; -#ifdef CONFIG_USB_MUSB_HOST -struct usb_bus_priv *priv =dev_get_uclass_priv (dev); -#endif -if (!base)return -EINVAL ;@@ -486,23 +492,31 @@ static int musb_usb_probe(struct udevice *dev) pdata.platform_ops = &sunxi_musb_ops; pdata.config = glue->cfg->config; -#ifdef CONFIG_USB_MUSB_HOST - priv->desc_before_addr = true; +if (IS_ENABLED (CONFIG_USB_MUSB_HOST )) { +struct usb_bus_priv *priv =dev_get_uclass_priv (dev); + priv->desc_before_addr = true; - pdata.mode =MUSB_HOST ; - host->host =musb_init_controller (&pdata, &glue->dev, base); -if (!host->host) -return -EIO ; + pdata.mode =MUSB_HOST ; + host->host =musb_init_controller (&pdata, &glue->dev, base); +if (!host->host) +return -EIO ; -return musb_lowlevel_init (host); -#else - pdata.mode =MUSB_PERIPHERAL ; - host->host =musb_register (&pdata, &glue->dev, base); -if (IS_ERR_OR_NULL (host->host)) -return -EIO ; +return musb_lowlevel_init (host); + }else if (CONFIG_IS_ENABLED (DM_USB_GADGET )) { + pdata.mode =MUSB_PERIPHERAL ; + host->host =musb_init_controller (&pdata, &glue->dev, base); +if (!host->host) +return -EIO ; -return 0 ;
drivers/usb/musb-new/sunxi.c static int musb_usb_probe(struct udevice *dev) · line 519
Quoted 10 lines
drivers/usb/musb-new/sunxi.c +9
-1-#endif +return usb_add_gadget_udc (&glue->dev, &host->host->g); + }else { + pdata.mode =MUSB_PERIPHERAL ; + host->host =musb_register (&pdata, &glue->dev, base); +if (IS_ERR_OR_NULL (host->host)) +return -EIO ; + +return 0 ; + }
That looks like a good cleanup! Just need to test it briefly, but it seems like the gist of this patch is fine.
Cheers,
Andre
Quoted 3 lines
drivers/usb/musb-new/sunxi.c +0
-0}static int musb_usb_remove (struct udevice *dev)
Re: [PATCH v2 2/2] usb: musb-new: sunxi: make compatible with UDC/DM gadget model
Quoted 6 lines · Andre Przywara
On Thu, 8 Jun 2023 13:56:31 -0600
Sam Edwards <[email protected]> wrote:Hi,
John asked me have a look at this.
Hi Andre, it's good to hear from you again,
I'd first like to make sure you're aware that the date on this patch is June *2023,* not June 2024. It's possible things have changed substantially in the past year. I do not know if this patch is still a necessity; though if John is nudging about it, it probably is.
Quoted 8 lines
Quoted 2 lines
Since many sunxi boards do not implement a
board_usb_init, it'sI am confused, what has this have to do with gadget support? *No* sunxi board build provides
board_usb_init(), but apparently this works fine for now.
I am all for this converting to DM part, but the rationale seems a bit off.
For context, board_usb_init() is (was?) the non-DM entry point for USB functionality; it is (was?) *the* implementation of usb_gadget_initialize() when !DM_USB_GADGET.
Quoted 4 lines
Also can you give some reason for this patch? What does this fix or improve? "it's better" is a bit thin, "complying with DM" would already be sufficient, but maybe there is more?
Eh, yeah, "better" is something of a question-begging word isn't it? :)
The main point is to be compatible with DM's view of UDC, which as you said is a worthy goal in itself. It's "better" because this allows using DM's all-purpose implementation of usb_gadget_initialize(), which is (was?) necessary for those targets lacking board_usb_init().
Quoted 19 lines
Quoted 19 lines
better if we just make the sunxi USB driver compatible with the DM gadget model, as many other musb-new variants already are.
This change has been verified working on a T113s.
Signed-off-by Sam Edwards <[email protected]>--- drivers/usb/musb-new/sunxi.c | 50 +++++++++++++++++++++++------------- 1 file changed, 32 insertions(+), 18 deletions(-)drivers/usb/musb-new/sunxi.c +0
-0@@ -444,6 +444,16 @@ static struct musb_hdrc_config musb_config_h3 = { .ram_bits = SUNXI_MUSB_RAM_BITS, };
Quoted 8 lines
drivers/usb/musb-new/sunxi.c static struct musb_hdrc_config musb_config_h3 = { · line 447
Quoted 1 line
drivers/usb/musb-new/sunxi.c +1
-0+#if CONFIG_IS_ENABLED (DM_USB_GADGET )Please no more #ifdef's. Is there any reason to *not* force
DM_USB_GADGETnow, for all sunxi boards, inKconfig?
Either by "select"ing it in the USBKconfig, or inarch/arm/Kconfig, like other platforms do.
Then you don't need to care about the !DM_USB_GADGET definition of this function and can drop the #ifdef.
I wouldn't be the one to ask. I can't think of any such reason myself. But to me it sounds like since *no sunxi board provides board_usb_init()* the only way USB gadgets *could* work is with DM_USB_GADGET? That'd be reason enough to force it.
Quoted 4 lines
drivers/usb/musb-new/sunxi.c static struct musb_hdrc_config musb_config_h3 = { · line 448
Quoted 2 lines
drivers/usb/musb-new/sunxi.c +1
-0+int dm_usb_gadget_handle_interrupts (struct udevice *dev) {coding style
Sentence fragments are harder to understand. I am assuming you are saying, "Please put the opening '{' on its own line."
Quoted 55 lines
Quoted 55 lines
drivers/usb/musb-new/sunxi.c +21
-16+struct sunxi_glue *glue =dev_get_priv (dev); +struct musb_host_data *host = &glue->mdata; + + host->host->isr (0 , host->host); + return 0; +} +#endif +static int musb_usb_probe (struct udevice *dev) {struct sunxi_glue *glue =dev_get_priv (dev);@@ -452,10 +462,6 @@ static int musb_usb_probe(struct udevice *dev)void *base =dev_read_addr_ptr (dev);int ret; -#ifdef CONFIG_USB_MUSB_HOST -struct usb_bus_priv *priv =dev_get_uclass_priv (dev); -#endif -if (!base)return -EINVAL ;@@ -486,23 +492,31 @@ static int musb_usb_probe(struct udevice *dev) pdata.platform_ops = &sunxi_musb_ops; pdata.config = glue->cfg->config; -#ifdef CONFIG_USB_MUSB_HOST - priv->desc_before_addr = true; +if (IS_ENABLED (CONFIG_USB_MUSB_HOST )) { +struct usb_bus_priv *priv =dev_get_uclass_priv (dev); + priv->desc_before_addr = true; - pdata.mode =MUSB_HOST ; - host->host =musb_init_controller (&pdata, &glue->dev, base); -if (!host->host) -return -EIO ; + pdata.mode =MUSB_HOST ; + host->host =musb_init_controller (&pdata, &glue->dev, base); +if (!host->host) +return -EIO ; -return musb_lowlevel_init (host); -#else - pdata.mode =MUSB_PERIPHERAL ; - host->host =musb_register (&pdata, &glue->dev, base); -if (IS_ERR_OR_NULL (host->host)) -return -EIO ; +return musb_lowlevel_init (host); + }else if (CONFIG_IS_ENABLED (DM_USB_GADGET )) { + pdata.mode =MUSB_PERIPHERAL ; + host->host =musb_init_controller (&pdata, &glue->dev, base); +if (!host->host) +return -EIO ;
Quoted 14 lines
drivers/usb/musb-new/sunxi.c static int musb_usb_probe(struct udevice *dev) · line 519
Quoted 11 lines
drivers/usb/musb-new/sunxi.c +9
-2-return 0 ; -#endif +return usb_add_gadget_udc (&glue->dev, &host->host->g); + }else { + pdata.mode =MUSB_PERIPHERAL ; + host->host =musb_register (&pdata, &glue->dev, base); +if (IS_ERR_OR_NULL (host->host)) +return -EIO ; + +return 0 ; + }That looks like a good cleanup! Just need to test it briefly, but it seems like the gist of this patch is fine.
I think it would be wise to test it a little better than "briefly" given the age of the patch. I'm not well-equipped to do any testing myself right now or I'd volunteer.
Quoted 3 lines
Cheers,
Andre
Likewise,
Sam
Quoted 6 lines
Quoted 5 lines
drivers/usb/musb-new/sunxi.c +0
-0}static int musb_usb_remove (struct udevice *dev)
Re: [PATCH v2 2/2] usb: musb-new: sunxi: make compatible with UDC/DM gadget model
On Thu, 27 Jun 2024 17:25:57 -0600
Sam Edwards <[email protected]> wrote:
Hi Sam,
thanks for coming back so quickly!
Quoted 6 lines · Andre Przywara
Quoted 5 lines
On Thu, 8 Jun 2023 13:56:31 -0600
Sam Edwards <[email protected]> wrote:Hi,
Quoted 7 lines
Quoted 1 line
John asked me have a look at this.
Hi Andre, it's good to hear from you again,
I'd first like to make sure you're aware that the date on this patch is June *2023,* not June 2024. It's possible things have changed substantially in the past year.
Not in the Allwinner MUSB driver, but indeed the gadget support in U-Boot has changed since then.
Quoted 2 lines
I do not know if this patch is still a
necessity; though if John is nudging about it, it probably is.
Yes apparently he needs it, though I am not entirely sure why. USB gadget has worked for ages in sunxi, without DM_USB_GADGET support, that's why I was a bit puzzled why this patch seems so important.
And secondly I was put off by John's initial reply that it would trigger many USB errors for him. He later rectified it, but I must have missed that message.
Quoted 10 lines
Quoted 7 lines
Quoted 1 line
Since many sunxi boards do not implement a
board_usb_init, it'sI am confused, what has this have to do with gadget support? *No* sunxi board build provides
board_usb_init(), but apparently this works fine for now.
I am all for this converting to DM part, but the rationale seems a bit off.For context,
board_usb_init()is (was?) the non-DM entry point for USB functionality;
I think board_usb_init() comes from the old days, to provide hooks in case certain boards need something special to enable USB, like an extra regulator, power domain or clock to toggle. These days this should all be covered by DT properties, so we should not (and do not!) need it. And there is an empty fallback implementation in common/usb.c.
Quoted 2 lines
it is (was?) *the* implementation of
usb_gadget_initialize()when !DM_USB_GADGET.
Mmh, was that so? None of them seemed to call usb_gadget_initialize(), though? I checked older releases, but usb_gadget_initialize() seemed to have always been called by the respective gadget code (fastboot, ums, ethernet)?
Quoted 10 lines
Quoted 3 lines
Also can you give some reason for this patch? What does this fix or improve? "it's better" is a bit thin, "complying with DM" would already be sufficient, but maybe there is more?
Eh, yeah, "better" is something of a question-begging word isn't it? :)
The main point is to be compatible with DM's view of UDC, which as you said is a worthy goal in itself. It's "better" because this allows using DM's all-purpose implementation of
usb_gadget_initialize(), which is (was?) necessary for those targets lackingboard_usb_init().
That's what triggered my confusion: there is no sunxi board as such that implements board_usb_init(), and with our USB PHY code being DT driven, we should not need it anyway.
There are empty fallback implementations in common/usb.c and drivers/usb/gadget/g_dnl.c, and we pick up one of them, given the right Kconfig symbols defined.
I just tried it: enabling the "ums" command, and it worked:
$ make orangepi_zero3_defconfig $ scripts/config --enable CONFIG_CMD_USB_MASS_STORAGE $ make olddefconfig $ make
then, on the U-Boot prompt:
=> ums 0 mmc 0
and the SD card block device popped up on my host.
(That the ums command is useful enough to be enabled by default is a separate story).
Gadget Ethernet and fastboot are even enabled by default, so whenever you have a defconfig with CONFIG_USB_MUSB_GADGET=y, you should get this functionality.
So can anyone tell why this patch is needed so desperately?
Quoted 27 lines
Quoted 18 lines
Quoted 18 lines
better if we just make the sunxi USB driver compatible with the DM gadget model, as many other musb-new variants already are.
This change has been verified working on a T113s.
Signed-off-by Sam Edwards <[email protected]>--- drivers/usb/musb-new/sunxi.c | 50 +++++++++++++++++++++++------------- 1 file changed, 32 insertions(+), 18 deletions(-)drivers/usb/musb-new/sunxi.c +0
-0@@ -444,6 +444,16 @@ static struct musb_hdrc_config musb_config_h3 = { .ram_bits = SUNXI_MUSB_RAM_BITS, };Quoted 8 lines
drivers/usb/musb-new/sunxi.c static struct musb_hdrc_config musb_config_h3 = { · line 447
Quoted 1 line
drivers/usb/musb-new/sunxi.c +1
-0+#if CONFIG_IS_ENABLED (DM_USB_GADGET )Please no more #ifdef's. Is there any reason to *not* force
DM_USB_GADGETnow, for all sunxi boards, inKconfig?
Either by "select"ing it in the USBKconfig, or inarch/arm/Kconfig, like other platforms do.
Then you don't need to care about the !DM_USB_GADGET definition of this function and can drop the #ifdef.
Quoted 4 lines
I wouldn't be the one to ask. I can't think of any such reason myself. But to me it sounds like since *no sunxi board provides board_usb_init()* the only way USB gadgets *could* work is with
DM_USB_GADGET? That'd be reason enough to force it.
See above.
So I think the only reason to *not* have DM_USB_GADGET in general is because some driver is not ready for that yet, or there is some odd device that requires some extra hacks that the DM implementation does not cover.
So with this patch we remove those reasons for sunxi, AFAICT. The Allwinner MUSB driver is now DM ready, so there is no reason to not set it. Think of it more as we are now declaring the sunxi MUSB driver as DM ready. That's why I want to see it set unconditionally, as it's not a user choice per se.
Eventually this DM specific symbol will go away at some point, as it did for other subsystems like Ethernet already.
Quoted 6 lines
Quoted 3 lines
drivers/usb/musb-new/sunxi.c static struct musb_hdrc_config musb_config_h3 = { · line 448
Quoted 1 line
drivers/usb/musb-new/sunxi.c +1
-0+int dm_usb_gadget_handle_interrupts (struct udevice *dev) {coding style
Sentence fragments are harder to understand. I am assuming you are saying, "Please put the opening '{' on its own line."
Funny enough I had these extra words, but then deleted them in fear it would sound too patronising for this obvious typo ;-)
Quoted 69 lines
Quoted 54 lines
Quoted 54 lines
drivers/usb/musb-new/sunxi.c +21
-16+struct sunxi_glue *glue =dev_get_priv (dev); +struct musb_host_data *host = &glue->mdata; + + host->host->isr (0 , host->host); + return 0; +} +#endif +static int musb_usb_probe (struct udevice *dev) {struct sunxi_glue *glue =dev_get_priv (dev);@@ -452,10 +462,6 @@ static int musb_usb_probe(struct udevice *dev)void *base =dev_read_addr_ptr (dev);int ret; -#ifdef CONFIG_USB_MUSB_HOST -struct usb_bus_priv *priv =dev_get_uclass_priv (dev); -#endif -if (!base)return -EINVAL ;@@ -486,23 +492,31 @@ static int musb_usb_probe(struct udevice *dev) pdata.platform_ops = &sunxi_musb_ops; pdata.config = glue->cfg->config; -#ifdef CONFIG_USB_MUSB_HOST - priv->desc_before_addr = true; +if (IS_ENABLED (CONFIG_USB_MUSB_HOST )) { +struct usb_bus_priv *priv =dev_get_uclass_priv (dev); + priv->desc_before_addr = true; - pdata.mode =MUSB_HOST ; - host->host =musb_init_controller (&pdata, &glue->dev, base); -if (!host->host) -return -EIO ; + pdata.mode =MUSB_HOST ; + host->host =musb_init_controller (&pdata, &glue->dev, base); +if (!host->host) +return -EIO ; -return musb_lowlevel_init (host); -#else - pdata.mode =MUSB_PERIPHERAL ; - host->host =musb_register (&pdata, &glue->dev, base); -if (IS_ERR_OR_NULL (host->host)) -return -EIO ; +return musb_lowlevel_init (host); + }else if (CONFIG_IS_ENABLED (DM_USB_GADGET )) { + pdata.mode =MUSB_PERIPHERAL ; + host->host =musb_init_controller (&pdata, &glue->dev, base); +if (!host->host) +return -EIO ;Quoted 14 lines
drivers/usb/musb-new/sunxi.c static int musb_usb_probe(struct udevice *dev) · line 519
Quoted 11 lines
drivers/usb/musb-new/sunxi.c +9
-2-return 0 ; -#endif +return usb_add_gadget_udc (&glue->dev, &host->host->g); + }else { + pdata.mode =MUSB_PERIPHERAL ; + host->host =musb_register (&pdata, &glue->dev, base); +if (IS_ERR_OR_NULL (host->host)) +return -EIO ; + +return 0 ; + }That looks like a good cleanup! Just need to test it briefly, but it seems like the gist of this patch is fine.
Quoted 3 lines
I think it would be wise to test it a little better than "briefly" given the age of the patch. I'm not well-equipped to do any testing myself right now or I'd volunteer.
So I gave it a spin on my OPi Zero 3. It seems to work(TM), although I need to stop the connection to the Ethernet gadget:
=> ums 0 mmc 0
UMS: LUN 0, dev mmc 0, hwpart 0, sector 0x0, count 0x3af000 All UDCs in use (1 available), use the unbind commandg_dnl_register: failed!, error: -19g_dnl_register failed
=> unbind ethernet 1
=> ums 0 mmc 0
=> ums 0 mmc 0
UMS: LUN 0, dev mmc 0, hwpart 0, sector 0x0, count 0x3af000 (works and waits at this point)
This seems like a quite annoying limitation, if anyone has an idea what should be done here, I am all ears. Maybe dropping the default Ethernet connection?
Thanks!
Andre
Quoted 6 lines
Quoted 6 lines
Quoted 5 lines
drivers/usb/musb-new/sunxi.c +0
-0}static int musb_usb_remove (struct udevice *dev)
Re: [PATCH v2 2/2] usb: musb-new: sunxi: make compatible with UDC/DM gadget model
Hi,
Quoted 10 lines · Andre Przywara
Quoted 2 lines
I do not know if this patch is still a
necessity; though if John is nudging about it, it probably is.Yes apparently he needs it, though I am not entirely sure why. USB gadget has worked for ages in sunxi, without
DM_USB_GADGETsupport, that's why I was a bit puzzled why this patch seems so important.And secondly I was put off by John's initial reply that it would trigger many USB errors for him. He later rectified it, but I must have missed that message.
This patch is necessary for gadget to work on the T113 board I have. Without it I get this error during fastboot:
Controller uninitializedg_dnl_register: failed!, error: -6
John.
Re: [PATCH v2 2/2] usb: musb-new: sunxi: make compatible with UDC/DM gadget model
On Sat, 29 Jun 2024 02:22:14 +1000
John Watts <[email protected]> wrote:
Hi,
Quoted 12 lines · Andre Przywara
Quoted 10 lines
Quoted 2 lines
I do not know if this patch is still a
necessity; though if John is nudging about it, it probably is.Yes apparently he needs it, though I am not entirely sure why. USB gadget has worked for ages in sunxi, without
DM_USB_GADGETsupport, that's why I was a bit puzzled why this patch seems so important.And secondly I was put off by John's initial reply that it would trigger many USB errors for him. He later rectified it, but I must have missed that message.
Quoted 5 lines
This patch is necessary for gadget to work on the T113 board I have. Without it I get this error during fastboot:
Controller uninitialized
g_dnl_register: failed!, error: -6
So I dug into this, and this is what I think is going on:
If you add "CONFIG_USB_MUSB_GADGET=y" to your *defconfig*, it should work. If you just enable it via menuconfig or by editing .config, it will not. Adding CONFIG_USB_ETHER to the mix should fix this. This symbol is automatically selected in Kconfig when it sees USB_MUSB_GADGET, but apparently only during a defconfig run, it's not selected during the other methods. Not sure what causes this difference in behaviour, but I have seen this in U-Boot before.
That being said: this is of course not a proper solution, the DM support proposed in that patch is the right way to go, but it should explain why it works for me, but not for you.
As for this patch: the problem is where the Ethernet gadget code apparently grabs the UDC device, without actually using it already. This prevents other gadgets like ums to be used, without unbinding the Ethernet gadget with a non-obvious command first.
So I think we need a solution for this first, otherwise the user experience would suffer.
Cheers,
Andre
Hi there,
I've tested this patch and it seems to support the gadget model, but I'm having a lot of USB errors. What device did you test this on?
John.
Quoted 21 lines · Sam Edwards
Happy Thursday, U-Boot list!
Here is attempt 2 at making this USB controller driver compatible with DM's gadget model, following what most of the other musb variants do.
v2 removes the unwanted printfs in the probe func, per feedback from Marek. I received no other feedback against v1 of this patch.
Cheers,
SamSam Edwards (2):
usb: musb-new: sunxi: remove unwanted printfs
usb: musb-new: sunxi: make compatible with UDC/DM gadget modeldrivers/usb/musb-new/sunxi.c | 52 +++++++++++++++++++++--------------- 1 file changed, 31 insertions(+), 21 deletions(-)Signature · 1 line
2.39.2
A message that is not in the archive (sent off-list or not yet received): CAH5Ym4gEJi693VRtrdgQAUmqQuQCCmQ1ASYJofQw92M6nBHyXA@mail.gmail.com
A message that is not in the archive (sent off-list or not yet received): ZheThnKWQJ3Zah-t@titan
Quoted 15 lines · John Watts
Quoted 10 lines · Sam Edwards
Hi John,
This patch was developed against (and used very heavily on) the Turing Pi 2, which has an Allwinner T113-s3 SoC. Likely it should work for any T113/D1 board. I haven't been encountering any USB errors but also my use case hasn't gone much beyond the
udccommand. What device/errors do you have over there?Cheers,
SamHi Sam,
Quoted 8 lines
I made a list of things that do work:
- DFU (slowly, probably due to no DMA) to RAM
- CDC serial consoleRunning a command like this:
ubi part ubi; ubifsmount ubi:root; ums 0 ubi 0;
Hi John,
Ahh I see the problem. In U-Boot, ubi isn't actually a block device:
it's implemented as a stub in the block layer, and the filesystem layer redirects ubi accesses to the currently-mounted ubifs instead. But the ums command works on the block layer, so it's not being intercepted, and instead hitting that stub and likely crashing. In the spirit of the Linux ubiblock driver, I have another patchset[1] I've been working on[2] to expose static ubivols as true read-only block devices. Note that this only works for static volumes: the access semantics of dynamic volumes are too flash-like to support block device access, so accessing them with ums likely will never work like users expect.
Still, there could be some interaction issue between ums<->USB that I haven't identified. Could you try with mmc (if available) or a ramdisk (otherwise) just to confirm that ums is fine?
Regards,
Sam
[1] https://lore.kernel.org/u-boot/[email protected]/T/
[2] Not very diligently; if you're interested in helping test it, I'd love to get back to it.
Quoted 122 lines
Gives this output in dmesg:
[3633079.772330] usb-storage 1-1.1:1.0: USB Mass Storage device detected [3633079.772506] scsi host9: usb-storage 1-1.1:1.0 [3633080.794607] scsi 9:0:0:0: Direct-Access Linux UMS disk 0 ffff PQ: 0 ANSI: 2 [3633080.794941] sd 9:0:0:0: Attached scsi generic sg6 type 0 [3633080.795214] sd 9:0:0:0: [sdg] 3942645758 512-byte logical blocks: (2.02 TB/1.83 TiB) [3633080.795220] sd 9:0:0:0: [sdg] 3925868545-byte physical blocks [3633080.795341] sd 9:0:0:0: [sdg] Write Protect is off [3633080.795345] sd 9:0:0:0: [sdg] Mode Sense: 0f 00 00 00 [3633080.795462] sd 9:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [3633080.907359] usb 1-1.1: reset high-speed USB device number 44 using xhci_hcd [3633081.021905] usb 1-1.1: device descriptor read/64, error -71 [3633081.238566] usb 1-1.1: device descriptor read/64, error -71 [3633081.448573] usb 1-1.1: reset high-speed USB device number 44 using xhci_hcd [3633081.558566] usb 1-1.1: device descriptor read/64, error -71 [3633081.775236] usb 1-1.1: device descriptor read/64, error -71 [3633081.988559] usb 1-1.1: reset high-speed USB device number 44 using xhci_hcd [3633086.788615] usb 1-1.1: Device not responding to setup address. [3633091.799190] usb 1-1.1: Device not responding to setup address. [3633092.008482] usb 1-1.1: device not accepting address 44, error -71 [3633092.747719] usb 1-1.1: USB disconnect, device number 44 [3633092.748488] device offline error, dev sdg, sector 0 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 2 [3633092.748502] buffer_io_error: 10 callbacks suppressed [3633092.748504] Buffer I/O error on dev sdg, logical block 0, async page read [3633092.748511] Buffer I/O error on dev sdg, logical block 1, async page read [3633092.748520] device offline error, dev sdg, sector 4 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 2 [3633092.748525] Buffer I/O error on dev sdg, logical block 2, async page read [3633092.748529] Buffer I/O error on dev sdg, logical block 3, async page read [3633092.748582] device offline error, dev sdg, sector 0 op 0x0:(READ) flags 0x0 phys_seg 4 prio class 2 [3633092.748594] Buffer I/O error on dev sdg, logical block 0, async page read [3633092.748600] Buffer I/O error on dev sdg, logical block 1, async page read [3633092.748605] Buffer I/O error on dev sdg, logical block 2, async page read [3633092.748609] Buffer I/O error on dev sdg, logical block 3, async page read [3633092.748621] ldm_validate_partition_table(): Disk read failed. [3633092.748638] device offline error, dev sdg, sector 0 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 2 [3633092.748644] Buffer I/O error on dev sdg, logical block 0, async page read [3633092.748649] Buffer I/O error on dev sdg, logical block 1, async page read [3633092.748665] device offline error, dev sdg, sector 4 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 2 [3633092.748686] device offline error, dev sdg, sector 0 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 2 [3633092.748704] device offline error, dev sdg, sector 4 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 2 [3633092.748726] device offline error, dev sdg, sector 0 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 2 [3633092.748744] device offline error, dev sdg, sector 4 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 2 [3633092.748754] sdg: unable to read partition table [3633092.748825] sd 9:0:0:0: [sdg] Attached SCSI removable diskHitting Ctrl-C in U-Boot then re-running the command gives this output:
CTRL+C - Operation aborted
=> ubi part ubi; ubifsmount ubi:root; ums 0 ubi 0;
UBI partition 'ubi' already selected
UMS: LUN 0, dev ubi -352321538, hwpart 234, sector0x0, count0xeafffffeprefetch abortpc : [<e8fd9ffa>] lr : [<45fb7665>]reloc pc : [<
e5e53ffa>] lr : [<42e31665>]
sp :45d5f970ip :45dd66a8fp : 00000000
r10:45ff88ecr9 :45d65eb0r8 :45dd1fe8
r7 :45dd1fd8r6 :45ff5f18r5 :45dd5600r4 :45fff4f0
r3 :e8fd9fffr2 :45ff3260r1 : 00000005 r0 :45dd5594
Flags: Nzcv IRQs off FIQs off ModeSVC_32(T)Code: ffff ffff fefd ffff (ffff) ffffResetting CPU ...
Fastboot instantly downloads an image but produces this output:
=> fastboot 0
musb-hdrc: peripheral reset irq lost!
Starting download of 7317504 bytes
.......................................................
downloading of 7317504 bytes finished
Booting kernel at 42000000...Wrong Image Type for bootm command
ERROR -91: can't get kernel image!
resetting ...Running 'fastboot stage' to just upload an image then hitting Ctrl-C in U-Boot gives this error:
undefined instruction
pc : [<45d69280>] lr : [<45fb8c0b>]reloc pc : [<
42be3280>] lr : [<42e32c0b>]
sp :45d5fa28ip :45d6b59cfp : 00000000
r10: 00000002 r9 :45d65eb0r8 : 00000000
r7 : 00000002 r6 :45d68c3cr5 : 00000000 r4 :45d69288
r3 :45d69280r2 : 00000001 r1 : 00001238 r0 :45d69288
Flags: nZCv IRQs off FIQs off ModeSVC_32Code: ffffffff ffffffff ffffffff ffffffff (ffffffff)Resetting CPU ...
Not too sure what's happening here.
John.
Quoted 26 lines
Quoted 26 lines
John.
Quoted 21 lines · Sam Edwards
Happy Thursday, U-Boot list!
Here is attempt 2 at making this USB controller driver compatible with DM's gadget model, following what most of the other musb variants do.
v2 removes the unwanted printfs in the probe func, per feedback from Marek. I received no other feedback against v1 of this patch.
Cheers,
SamSam Edwards (2):
usb: musb-new: sunxi: remove unwanted printfs
usb: musb-new: sunxi: make compatible with UDC/DM gadget modeldrivers/usb/musb-new/sunxi.c | 52 +++++++++++++++++++++--------------- 1 file changed, 31 insertions(+), 21 deletions(-)--
2.39.2
Quoted 1 line · Sam Edwards
Hi John,
Hi Sam,
Quoted 11 lines
Ahh I see the problem. In U-Boot,
ubiisn't actually a block device:
it's implemented as a stub in the block layer, and the filesystem layer redirectsubiaccesses to the currently-mounted ubifs instead. But theumscommand works on the block layer, so it's not being intercepted, and instead hitting that stub and likely crashing. In the spirit of the Linux ubiblock driver, I have another patchset[1] I've been working on[2] to expose static ubivols as true read-only block devices. Note that this only works for static volumes: the access semantics of dynamic volumes are too flash-like to support block device access, so accessing them withumslikely will never work like users expect.
I'll give a patchset a test when I can.
Quoted 3 lines
Still, there could be some interaction issue between
ums<->USB that I haven't identified. Could you try with mmc (if available) or a ramdisk (otherwise) just to confirm thatumsis fine?
I'll try testing with those if possible.
I did find out that fastboot actually works, and is much, much faster than DFU for some reason.
John.
Quoted 7 lines
Regards,
Sam[1] https://lore.kernel.org/u-boot/[email protected]/T/
[2] Not very diligently; if you're interested in helping test it, I'd love to get back to it.
Quoted 7 lines · Sam Edwards
Happy Thursday, U-Boot list!
Here is attempt 2 at making this USB controller driver compatible with DM's gadget model, following what most of the other musb variants do.
v2 removes the unwanted printfs in the probe func, per feedback from Marek. I received no other feedback against v1 of this patch.
Hi Sam,
I did some more testing and I believe my USB issues mentioned in the other subthread are unrelated to this patch.
As such, here's my reviewed-by and tested-by. :)
John.
Quoted 14 lines
Cheers,
SamSam Edwards (2):
usb: musb-new: sunxi: remove unwanted printfs
usb: musb-new: sunxi: make compatible with UDC/DM gadget modeldrivers/usb/musb-new/sunxi.c | 52 +++++++++++++++++++++--------------- 1 file changed, 31 insertions(+), 21 deletions(-)Signature · 1 line
2.39.2