ARM: mach-imx: imx6sx: Remove Ethernet refclock setting
Subsystems (3)
Fabio Estevam
reviewerPATCH v2 1/1 ARM: mach-imx: imx6sx: Remove Ethernet refclock setting
From: Fabio Estevam <[email protected]>
The Ethernet refclock configuration is board specific and should not be harcoded in machine code.
Remove it to align with the imx6ul commit e87f3be1c7f8 ("ARM: mach-imx:
imx6ul: remove not optional ethernet refclock overwrite").
Clearing bits 13 and 17 of GPR1 is the POR values, so this change does not affect existing boards in mainline.
Tested on imx6sx-udoo-neo and imx6sx-sdb boards.
---
Changes since v1:
- Fixed typo in the Subject (imx6ul-->imx6sx).
arch/arm/mach-imx/mach-imx6sx.c | 22 ---------------------- 1 file changed, 22 deletions(-)
arch/arm/mach-imx/mach-imx6sx.c +0 -22
@@ -7,37 +7,15 @@#include <linux/of_platform.h> #include <linux/regmap.h> #include <linux/mfd/syscon.h> -#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h> #include <asm/mach/arch.h> #include "common.h" #include "cpuidle.h" -static void __init imx6sx_enet_clk_sel (void ) -{ -struct regmap *gpr; - - gpr =syscon_regmap_lookup_by_compatible ("fsl,imx6sx-iomuxc-gpr" ); -if (!IS_ERR (gpr)) { -regmap_update_bits (gpr,IOMUXC_GPR1 , -IMX6SX_GPR1_FEC_CLOCK_MUX_SEL_MASK ,0 ); -regmap_update_bits (gpr,IOMUXC_GPR1 , -IMX6SX_GPR1_FEC_CLOCK_PAD_DIR_MASK ,0 ); - }else { -pr_err ("failed to find fsl,imx6sx-iomux-gpr regmap\n" ); - } -} - -static inline void imx6sx_enet_init (void ) -{ -imx6sx_enet_clk_sel (); -} -static void __init imx6sx_init_machine (void ) {of_platform_default_populate (NULL ,NULL ,NULL ); -imx6sx_enet_init ();imx_anatop_init ();imx6sx_pm_init (); }
Signature · 1 line
2.34.1
Shawn Guo
AppliedQuoted 8 lines · Fabio Estevam
From: Fabio Estevam <[email protected]>
The Ethernet refclock configuration is board specific and should not be harcoded in machine code.
Remove it to align with the imx6ul commit
e87f3be1c7f8("ARM: mach-imx:
imx6ul: remove not optional ethernet refclock overwrite").
Quoted 6 lines
Clearing bits 13 and 17 of GPR1 is the POR values, so this change does not affect existing boards in mainline.
Tested on imx6sx-udoo-neo and imx6sx-sdb boards.
Signed-off-by Fabio Estevam <[email protected]>
Applied, thanks!