arch: riscv: thead: implement basic spi
Subsystems (4)
PATCH 1/2 arch: riscv: thead: implement basic spi
implemented basic spi support for TH1520 SoC.
created a fixed clock and a simple spi0 node.
updated the matching binding to include thead,th1520-spi as compatible. added a spidev device in devicetree which will utilise the spi0 node. this is usually reserved for a SPI NOR flash which is left unpopulated underneath the carrier board. I performed a SPI self loop test using tools/spi/spidev_test.c and tried sending \xDE\xAD\xBE\xEF and verified it is being received correctly. i updated the of_device_id struct in drivers/spi/spi-dw-mmio.c to include "thead,th1520-spi" as the compatible. this patch also adds basic spi support on beaglev ahead which shares the same TH1520 SoC. i have only tested on LicheePi 4A.
--- .../devicetree/bindings/spi/snps,dw-apb-ssi.yaml | 4 ++++ .../boot/dts/thead/th1520-beaglev-ahead.dts | 9 +++++++++ .../boot/dts/thead/th1520-lichee-module-4a.dtsi | 4 ++++ .../riscv/boot/dts/thead/th1520-lichee-pi-4a.dts | 10 ++++++++++ arch/riscv/boot/dts/thead/th1520.dtsi | 16 ++++++++++++++++ drivers/spi/spi-dw-mmio.c | 1 + 6 files changed, 44 insertions(+)
Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml +4 -0
@@ -88,6 +88,10 @@ properties: - renesas,r9a06g032-spi # RZ/N1D - renesas,r9a06g033-spi # RZ/N1S - const: renesas,rzn1-spi # RZ/N1 + - description: T-HEAD TH1520 SoC SPI Controller + items: + - const: thead,th1520-spi + - const: snps,dw-apb-ssi reg: minItems: 1
arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts +9 -0
@@ -17,6 +17,7 @@ aliases { gpio1 = &gpio1; gpio2 = &gpio2; gpio3 = &gpio3; + spi0 = &spi0; serial0 = &uart0; serial1 = &uart1; serial2 = &uart2;
@@ -52,6 +53,10 @@ &sdhci_clk { clock-frequency = <198000000>; }; +&spi_clk { + clock-frequency = <396000000>; +}; + &uart_sclk { clock-frequency = <100000000>; };
@@ -79,3 +84,7 @@ &sdio0 { &uart0 { status = "okay"; }; + +&spi0 { + status = "okay"; +};
arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi +4 -0
@@ -33,6 +33,10 @@ &sdhci_clk { clock-frequency = <198000000>; }; +&spi_clk { + clock-frequency = <396000000>; +}; + &uart_sclk { clock-frequency = <100000000>; };
arch/riscv/boot/dts/thead/th1520-lichee-pi-4a.dts +10 -0
@@ -14,6 +14,7 @@ aliases { gpio1 = &gpio1; gpio2 = &gpio2; gpio3 = &gpio3; + spi0 = &spi0; serial0 = &uart0; serial1 = &uart1; serial2 = &uart2;
@@ -30,3 +31,12 @@ chosen { &uart0 { status = "okay"; }; + +&spi0 { + status = "okay"; + spidev@0 { + compatible = "rohm,dh2228fv"; + reg = <0>; + spi-max-frequency = <500000>; + }; +};
arch/riscv/boot/dts/thead/th1520.dtsi +16 -0
@@ -140,6 +140,12 @@ apb_clk: apb-clk-clock { #clock-cells = <0>; }; + spi_clk: spi-clock { + compatible = "fixed-clock"; + clock-output-names = "spi_clk"; + #clock-cells = <0>; + }; + uart_sclk: uart-sclk-clock { compatible = "fixed-clock"; clock-output-names = "uart_sclk";
@@ -183,6 +189,16 @@ clint: timer@ffdc000000 { <&cpu3_intc 3>, <&cpu3_intc 7>; }; + spi0: spi@ffe700c000 { + compatible = "thead,th1520-spi", "snps,dw-apb-ssi"; + reg = <0xff 0xe700c000 0x0 0x1000>; + interrupts = <54 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&spi_clk>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + uart0: serial@ffe7014000 { compatible = "snps,dw-apb-uart"; reg = <0xff 0xe7014000 0x0 0x100>;
drivers/spi/spi-dw-mmio.c +1 -0
@@ -419,6 +419,7 @@ static const struct of_device_id dw_spi_mmio_of_match[] = { { .compatible = "microchip,sparx5-spi", dw_spi_mscc_sparx5_init}, { .compatible = "canaan,k210-spi", dw_spi_canaan_k210_init}, { .compatible = "amd,pensando-elba-spi", .data = dw_spi_elba_init}, + { .compatible = "thead,th1520-spi", .data = dw_spi_pssi_init}, { /* end of table */} };MODULE_DEVICE_TABLE (of, dw_spi_mmio_of_match);
Signature · 1 line
2.45.2