I2C controller support for KEBA PLCs
Subsystems (2)
v2 cover I2C controller support for KEBA PLCs
KEBA PLCs use a PCIe FPGA to implement several functions in a common way. This is a first step to include basic support for this FPGA.
Under drivers/misc the cp500 PCI driver is added. This drivers creates auxiliary devices for every function inside the FPGA. As a first step it only creates auxiliary devices for the I2C controllers.
The I2C controller driver is added under drivers/i2c/busses like all the other I2C controller drivers.
This patches enable access to the EEPROMs and to the hardware monitoring chip of KEBA PLCs.
v2:
- use aux bus (Greg KH)
- add Documentation/ABI/ entry for version and keep_cfg sysfs files (Greg KH)
- use sysfs_emit (Greg KH)
- add some information about I2C controller in commit message (Andi Shyti)
- remove old copyright line (Andi Shyti)
- sort header alphabetically (Andi Shyti)
- rework register defines as suggested (Andi Shyti)
- fix block comment style multiple times (Andi Shyti)
- add comment that IN_USE bit is a semaphore (Andi Shyti)
- add comment that IN_USE bit polling sleeps (Andi Shyti)
- addr as first argument of ki2c_wait_for_bit() (Andi Shyti)
- avoid compact style for register flag check (Andi Shyti)
- move bus reset dev_err's to reset implementation (Andi Shyti)
- use dev_err_probe() (Andi Shyti)
- fix 'ki2c_devtype defined but not used' (kernel test robot)
- fix 'WARNING comparing pointer to 0', twice (kernel test robot)
- fix 'Using plain integer as NULL pointer' (kernel test robot)
- fix 'symbol cp035_devices was not declared. Should it be static?', 3 times (kernel test robot)
Gerhard Engleder (2):
misc: keba: Add basic KEBA CP500 system FPGA support
i2c: keba: Add KEBA I2C controller support
.../ABI/stable/sysfs-driver-misc-cp500 | 25 + drivers/i2c/busses/Kconfig | 10 + drivers/i2c/busses/Makefile | 1 + drivers/i2c/busses/i2c-keba.c | 595 ++++++++++++++++++ drivers/misc/Kconfig | 1 + drivers/misc/Makefile | 1 + drivers/misc/keba/Kconfig | 12 + drivers/misc/keba/Makefile | 3 + drivers/misc/keba/cp500.c | 458 ++++++++++++++ include/linux/misc/keba.h | 25 + 10 files changed, 1131 insertions(+) create mode 100644 Documentation/ABI/stable/sysfs-driver-misc-cp500 create mode 100644 drivers/i2c/busses/i2c-keba.c create mode 100644 drivers/misc/keba/Kconfig create mode 100644 drivers/misc/keba/Makefile create mode 100644 drivers/misc/keba/cp500.c create mode 100644 include/linux/misc/keba.h
Signature · 1 line
2.39.2
PATCH v2 1/2 misc: keba: Add basic KEBA CP500 system FPGA support
From: Gerhard Engleder <[email protected]>
The KEBA CP500 system FPGA is a PCIe device, which consists of multiple IP cores. Every IP core has its own auxiliary driver. The cp500 driver registers an auxiliary device for each device and the corresponding drivers are loaded by the Linux driver infrastructure.
Currently 3 variants of this device exists. Every variant has its own PCI device ID, which is used to determine the list of available IP cores. In this first version only the auxiliary device for the I2C controller is registered.
Besides the auxiliary device registration some other basic functions of the FPGA are implemented; e.g, FPGA version sysfs file, keep FPGA configuration on reset sysfs file, error message for errors on the internal AXI bus of the FPGA.
--- .../ABI/stable/sysfs-driver-misc-cp500 | 25 + drivers/misc/Kconfig | 1 + drivers/misc/Makefile | 1 + drivers/misc/keba/Kconfig | 12 + drivers/misc/keba/Makefile | 3 + drivers/misc/keba/cp500.c | 458 ++++++++++++++++++ include/linux/misc/keba.h | 25 + 7 files changed, 525 insertions(+) create mode 100644 Documentation/ABI/stable/sysfs-driver-misc-cp500 create mode 100644 drivers/misc/keba/Kconfig create mode 100644 drivers/misc/keba/Makefile create mode 100644 drivers/misc/keba/cp500.c create mode 100644 include/linux/misc/keba.h
Documentation/ABI/stable/sysfs-driver-misc-cp500 new file +25 -0
@@ -0,0 +1,25 @@ +What: /sys/devices/pciXXXX:XX/0000:XX:XX.X/0000:XX:XX.X/version +Date: June 2024 +KernelVersion: 6.11 +Contact: Gerhard Engleder <[email protected]> +Description: Version of the FPGA configuration bitstream as printable string. + This file is read only. +Users: KEBA + +What: /sys/devices/pciXXXX:XX/0000:XX:XX.X/0000:XX:XX.X/keep_cfg +Date: June 2024 +KernelVersion: 6.11 +Contact: Gerhard Engleder <[email protected]> +Description: Flag which signals if FPGA shall keep or reload configuration + bitstream on reset. Normal FPGA behavior and default is to keep + configuration bitstream and to only reset the configured logic. + + Reloading configuration on reset enables an update of the + configuration bitstream with a simple reboot. Otherwise it is + necessary to power cycle the device to reload the new + configuration bitstream. + + This file is read/write. The values are as follows: + 1 = keep configuration bitstream on reset, default + 0 = reload configuration bitstream on reset +Users: KEBA
drivers/misc/Kconfig +1 -0
@@ -602,4 +602,5 @@ source "drivers/misc/cardreader/Kconfig" source "drivers/misc/uacce/Kconfig" source "drivers/misc/pvpanic/Kconfig" source "drivers/misc/mchp_pci1xxxx/Kconfig" +source "drivers/misc/keba/Kconfig" endmenu
drivers/misc/Makefile +1 -0
@@ -69,3 +69,4 @@ obj-$(CONFIG_TMR_INJECT) += xilinx_tmr_inject.o obj-$(CONFIG_TPS6594_ESM) += tps6594-esm.o obj-$(CONFIG_TPS6594_PFSM) += tps6594-pfsm.o obj-$(CONFIG_NSM) += nsm.o +obj-y += keba/
drivers/misc/keba/Kconfig new file +12 -0
@@ -0,0 +1,12 @@ +# SPDX-License-Identifier: GPL-2.0 +config KEBA_CP500 + tristate "KEBA CP500 system FPGA support" + depends on PCI + help + This driver supports the KEBA CP500 system FPGA, which is used in + KEBA CP500 devices. It registers all sub devices present on the CP500 + system FPGA as separate devices. A driver is needed for each sub + device. + + This driver can also be built as a module. If so, the module will be + called cp500.
drivers/misc/keba/Makefile new file +3 -0
@@ -0,0 +1,3 @@ +# SPDX-License-Identifier: GPL-2.0 + +obj-$(CONFIG_KEBA_CP500) += cp500.o
drivers/misc/keba/cp500.c new file +458 -0
458 lines not on this page · raw message
include/linux/misc/keba.h new file +25 -0
@@ -0,0 +1,25 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* Copyright (C) 2024, KEBA Industrial Automation Gmbh */ + +#ifndef _LINUX_MISC_KEBA_H +#define _LINUX_MISC_KEBA_H + +#include <linux/auxiliary_bus.h> + +struct i2c_board_info ; + +/** +* struct keba_i2c_auxdev - KEBA I2C auxiliary device +* @auxdev: auxiliary device object +* @io: address range of I2C controller IO memory +* @info_size: number of I2C devices to be probed +* @info: I2C devices to be probed +*/ +struct keba_i2c_auxdev { +struct auxiliary_device auxdev; +struct resource io; +int info_size; +struct i2c_board_info *info; +}; + +#endif /* _LINUX_MISC_KEBA_H */
Signature · 1 line
2.39.2
PATCH v2 2/2 i2c: keba: Add KEBA I2C controller support
In reply to Gerhard EnglederFrom: Gerhard Engleder <[email protected]>
The KEBA I2C controller is found in the system FPGA of KEBA PLC devices. It is used to connect EEPROMs and hardware monitoring chips. The
It is a simple I2C controller with a fixed bus speed of 100 kbit/s. The whole message transmission is executed by the driver. The driver triggers all steps over control, status and data register. There are no FIFOs or interrupts.
--- drivers/i2c/busses/Kconfig | 10 + drivers/i2c/busses/Makefile | 1 + drivers/i2c/busses/i2c-keba.c | 595 ++++++++++++++++++++++++++++++++++ 3 files changed, 606 insertions(+) create mode 100644 drivers/i2c/busses/i2c-keba.c
drivers/i2c/busses/Kconfig +10 -0
@@ -771,6 +771,16 @@ config I2C_JZ4780 If you don't know what to do here, say N. +config I2C_KEBA + tristate "KEBA I2C controller support" + depends on HAS_IOMEM + help + This driver supports the I2C controller found in KEBA system FPGA + devices. + + This driver can also be built as a module. If so, the module + will be called i2c-keba. + config I2C_KEMPLD tristate "Kontron COM I2C Controller" depends on MFD_KEMPLD
drivers/i2c/busses/Makefile +1 -0
@@ -76,6 +76,7 @@ obj-$(CONFIG_I2C_IMX) += i2c-imx.o obj-$(CONFIG_I2C_IMX_LPI2C) += i2c-imx-lpi2c.o obj-$(CONFIG_I2C_IOP3XX) += i2c-iop3xx.o obj-$(CONFIG_I2C_JZ4780) += i2c-jz4780.o +obj-$(CONFIG_I2C_KEBA) += i2c-keba.o obj-$(CONFIG_I2C_KEMPLD) += i2c-kempld.o obj-$(CONFIG_I2C_LPC2K) += i2c-lpc2k.o obj-$(CONFIG_I2C_LS2X) += i2c-ls2x.o
drivers/i2c/busses/i2c-keba.c new file +595 -0
595 lines not on this page · raw message
Signature · 1 line
2.39.2
Andi Shyti
maintainerRe: [PATCH v2 2/2] i2c: keba: Add KEBA I2C controller support
Hi Gerhard,
...
Quoted 4 lines
drivers/i2c/busses/i2c-keba.c new file +4
-0+static int ki2c_xfer (struct i2c_adapter *adap,struct i2c_msg msgs[],int num) +{ +struct ki2c *ki2c =i2c_get_adapdata (adap); +int ret;
drivers/i2c/busses/i2c-keba.c line 439
Quoted 10 lines
drivers/i2c/busses/i2c-keba.c new file +10
-0+ + ret =ki2c_inuse_lock (ki2c); +if (ret <0 ) +return ret; + +for (int i =0 ; i < num; i++) { +struct i2c_msg *m = &msgs[i]; + +if (i ==0 ) + ret =ki2c_start_addr (ki2c, m);
do we want to keep the error if we fail to receive the data ack?
Quoted 26 lines
drivers/i2c/busses/i2c-keba.c new file +26
-0+else + ret =ki2c_repstart_addr (ki2c, m); +if (ret <0 ) +break ; + +if (m->flags &I2C_M_RD ) + ret =ki2c_read (ki2c, m->buf, m->len); +else + ret =ki2c_write (ki2c, m->buf, m->len); +if (ret <0 ) +break ; + } + +ki2c_stop (ki2c); + +ki2c_inuse_unlock (ki2c); + +return (ret <0 ) ? ret : num; +} + +static void ki2c_unregister_devices (struct ki2c *ki2c) +{ +for (int i =0 ; i < ki2c->client_size; i++) { +struct i2c_client *client = ki2c->client[i]; + +if (client)
drivers/i2c/busses/i2c-keba.c line 475
Quoted 10 lines
drivers/i2c/busses/i2c-keba.c new file +10
-0+i2c_unregister_device (client); + } +} + +static int ki2c_register_devices (struct ki2c *ki2c) +{ +struct i2c_board_info *info = ki2c->auxdev->info; + +/* register all I2C devices from platform_data array */ +for (int i =0 ; i < ki2c->client_size; i++) {
Please declare the variable at the beginning of the function.
Did you run checkpatch.pl before sending?
Quoted 43 lines
drivers/i2c/busses/i2c-keba.c new file +43
-0+struct i2c_client *client; +unsigned short const addr_list[2 ] = { info[i].addr, +I2C_CLIENT_END }; + + client =i2c_new_scanned_device (&ki2c->adapter, &info[i], + addr_list,NULL ); +if (!IS_ERR (client)) { + ki2c->client[i] = client; + }else if (PTR_ERR (client) != -ENODEV ) { +ki2c_unregister_devices (ki2c); + +return PTR_ERR (client); + } + } + +return 0 ; +} + +static u32 ki2c_func (struct i2c_adapter *adap) +{ +return I2C_FUNC_I2C |I2C_FUNC_SMBUS_EMUL ; +} + +static const struct i2c_algorithm ki2c_algo = { + .master_xfer = ki2c_xfer, + .functionality = ki2c_func, +}; + +static int ki2c_probe (struct auxiliary_device *auxdev, +const struct auxiliary_device_id *id) +{ +struct device *dev = &auxdev->dev; +struct i2c_adapter *adap; +struct ki2c *ki2c; +int ret; + + ki2c =devm_kzalloc (dev,sizeof (*ki2c),GFP_KERNEL ); +if (!ki2c) +return -ENOMEM ; + ki2c->auxdev = container_of(auxdev, struct keba_i2c_auxdev, auxdev); + ki2c->client =devm_kcalloc (dev, ki2c->auxdev->info_size, +sizeof (*ki2c->client),GFP_KERNEL ); +if (!ki2c->client)
drivers/i2c/busses/i2c-keba.c line 528
Quoted 10 lines
drivers/i2c/busses/i2c-keba.c new file +10
-0+return -ENOMEM ; + ki2c->client_size = ki2c->auxdev->info_size; +auxiliary_set_drvdata (auxdev, ki2c); + + ki2c->base =devm_ioremap_resource (dev, &ki2c->auxdev->io); +if (IS_ERR (ki2c->base)) +return PTR_ERR (ki2c->base); + +/* enable controller */ +iowrite8 (KI2C_CONTROL_MEN , ki2c->base +KI2C_CONTROL_REG );
Can we enable at the end? What's the point for enabling the device so early? (We also save a few goto's)
Quoted 5 lines
drivers/i2c/busses/i2c-keba.c new file +5
-0+ adap = &ki2c->adapter; +strscpy (adap->name,"KEBA I2C adapter" ,sizeof (adap->name)); + adap->owner =THIS_MODULE ; + adap->class =I2C_CLASS_HWMON ; + adap->algo = &ki2c_algo;
drivers/i2c/busses/i2c-keba.c line 544
Quoted 10 lines
drivers/i2c/busses/i2c-keba.c new file +10
-0+ adap->dev.parent = dev; + +i2c_set_adapdata (adap, ki2c); + +/* reset bus before probing I2C devices */ + ret =ki2c_reset_bus (ki2c); +if (ret) + goto out_disable; + + ret =i2c_add_adapter (adap);
Please use devm_i2c_add_adapter()
Quoted 7 lines
drivers/i2c/busses/i2c-keba.c new file +7
-0+if (ret) { +dev_err (dev,"Failed to add adapter (%d)!\n" , ret); + goto out_disable; + } + + ret =ki2c_register_devices (ki2c); +if (ret) {
drivers/i2c/busses/i2c-keba.c line 561
Quoted 10 lines
drivers/i2c/busses/i2c-keba.c new file +10
-0+dev_err (dev,"Failed to register devices (%d)!\n" , ret); + goto out_delete; + } + +return 0 ; + +out_delete: +i2c_del_adapter (adap); +out_disable: +iowrite8 (0 , ki2c->base +KI2C_CONTROL_REG );
Can we define Value '0'? KI2C_CONTROL_DISABLE, perhaps?
Andi
Quoted 37 lines
drivers/i2c/busses/i2c-keba.c new file +34
-0+return ret; +} + +static void ki2c_remove (struct auxiliary_device *auxdev) +{ +struct ki2c *ki2c =auxiliary_get_drvdata (auxdev); + +ki2c_unregister_devices (ki2c); + +i2c_del_adapter (&ki2c->adapter); + +/* disable controller */ +iowrite8 (0 , ki2c->base +KI2C_CONTROL_REG ); + +auxiliary_set_drvdata (auxdev,NULL ); +} + +static const struct auxiliary_device_id ki2c_devtype_aux[] = { + { .name ="keba.i2c" }, + { }, +}; +MODULE_DEVICE_TABLE (auxiliary, ki2c_devtype_aux); + +static struct auxiliary_driver ki2c_driver_aux = { + .name =KI2C , + .id_table = ki2c_devtype_aux, + .probe = ki2c_probe, + .remove = ki2c_remove, +}; +module_auxiliary_driver (ki2c_driver_aux); + +MODULE_AUTHOR ("Gerhard Engleder <[email protected]>" ); +MODULE_DESCRIPTION ("KEBA I2C bus controller driver" ); +MODULE_LICENSE ("GPL" );Signature · 1 line
2.39.2
Re: [PATCH v2 2/2] i2c: keba: Add KEBA I2C controller support
Quoted 1 line · Andi Shyti
Hi Gerhard,
Hi Andi,
Quoted 19 lines
...
Quoted 4 lines
drivers/i2c/busses/i2c-keba.c new file +4
-0+static int ki2c_xfer (struct i2c_adapter *adap,struct i2c_msg msgs[],int num) +{ +struct ki2c *ki2c =i2c_get_adapdata (adap); +int ret;drivers/i2c/busses/i2c-keba.c line 439
Quoted 10 lines
drivers/i2c/busses/i2c-keba.c new file +10
-0+ + ret =ki2c_inuse_lock (ki2c); +if (ret <0 ) +return ret; + +for (int i =0 ; i < num; i++) { +struct i2c_msg *m = &msgs[i]; + +if (i ==0 ) + ret =ki2c_start_addr (ki2c, m);do we want to keep the error if we fail to receive the data ack?
Yes that is intended. Is there something wrong with forwarding the error?
Quoted 40 lines
Quoted 27 lines
drivers/i2c/busses/i2c-keba.c new file +26
-0+else + ret =ki2c_repstart_addr (ki2c, m); +if (ret <0 ) +break ; + +if (m->flags &I2C_M_RD ) + ret =ki2c_read (ki2c, m->buf, m->len); +else + ret =ki2c_write (ki2c, m->buf, m->len); +if (ret <0 ) +break ; + } + +ki2c_stop (ki2c); + +ki2c_inuse_unlock (ki2c); + +return (ret <0 ) ? ret : num; +} + +static void ki2c_unregister_devices (struct ki2c *ki2c) +{ +for (int i =0 ; i < ki2c->client_size; i++) { +struct i2c_client *client = ki2c->client[i]; + +if (client)drivers/i2c/busses/i2c-keba.c line 475
Quoted 10 lines
drivers/i2c/busses/i2c-keba.c new file +10
-0+i2c_unregister_device (client); + } +} + +static int ki2c_register_devices (struct ki2c *ki2c) +{ +struct i2c_board_info *info = ki2c->auxdev->info; + +/* register all I2C devices from platform_data array */ +for (int i =0 ; i < ki2c->client_size; i++) {Please declare the variable at the beginning of the function.
Quoted 1 line
Did you run checkpatch.pl before sending?
Yes, multiple times, but it did not trigger. I will fix that declaration.
Quoted 48 lines
Quoted 48 lines
drivers/i2c/busses/i2c-keba.c new file +48
-0+struct i2c_client *client; +unsigned short const addr_list[2 ] = { info[i].addr, +I2C_CLIENT_END }; + + client =i2c_new_scanned_device (&ki2c->adapter, &info[i], + addr_list,NULL ); +if (!IS_ERR (client)) { + ki2c->client[i] = client; + }else if (PTR_ERR (client) != -ENODEV ) { +ki2c_unregister_devices (ki2c); + +return PTR_ERR (client); + } + } + +return 0 ; +} + +static u32 ki2c_func (struct i2c_adapter *adap) +{ +return I2C_FUNC_I2C |I2C_FUNC_SMBUS_EMUL ; +} + +static const struct i2c_algorithm ki2c_algo = { + .master_xfer = ki2c_xfer, + .functionality = ki2c_func, +}; + +static int ki2c_probe (struct auxiliary_device *auxdev, +const struct auxiliary_device_id *id) +{ +struct device *dev = &auxdev->dev; +struct i2c_adapter *adap; +struct ki2c *ki2c; +int ret; + + ki2c =devm_kzalloc (dev,sizeof (*ki2c),GFP_KERNEL ); +if (!ki2c) +return -ENOMEM ; + ki2c->auxdev = container_of(auxdev, struct keba_i2c_auxdev, auxdev); + ki2c->client =devm_kcalloc (dev, ki2c->auxdev->info_size, +sizeof (*ki2c->client),GFP_KERNEL ); +if (!ki2c->client) +return -ENOMEM ; + ki2c->client_size = ki2c->auxdev->info_size; +auxiliary_set_drvdata (auxdev, ki2c); + + ki2c->base =devm_ioremap_resource (dev, &ki2c->auxdev->io);
Quoted 8 lines
drivers/i2c/busses/i2c-keba.c line 528
Quoted 5 lines
drivers/i2c/busses/i2c-keba.c new file +5
-0+if (IS_ERR (ki2c->base)) +return PTR_ERR (ki2c->base); + +/* enable controller */ +iowrite8 (KI2C_CONTROL_MEN , ki2c->base +KI2C_CONTROL_REG );Can we enable at the end? What's the point for enabling the device so early? (We also save a few goto's)
You are right, I will enable it as late as possible.
Quoted 9 lines
Quoted 9 lines
drivers/i2c/busses/i2c-keba.c new file +9
-0+ adap = &ki2c->adapter; +strscpy (adap->name,"KEBA I2C adapter" ,sizeof (adap->name)); + adap->owner =THIS_MODULE ; + adap->class =I2C_CLASS_HWMON ; + adap->algo = &ki2c_algo; + adap->dev.parent = dev; + +i2c_set_adapdata (adap, ki2c); +
Quoted 8 lines
drivers/i2c/busses/i2c-keba.c line 544
Quoted 6 lines
drivers/i2c/busses/i2c-keba.c new file +6
-0+/* reset bus before probing I2C devices */ + ret =ki2c_reset_bus (ki2c); +if (ret) + goto out_disable; + + ret =i2c_add_adapter (adap);Please use
devm_i2c_add_adapter()
Another devm_ function I was not aware of. I will use it. Thanks for the advice!
Quoted 11 lines
Quoted 11 lines
drivers/i2c/busses/i2c-keba.c new file +11
-0+if (ret) { +dev_err (dev,"Failed to add adapter (%d)!\n" , ret); + goto out_disable; + } + + ret =ki2c_register_devices (ki2c); +if (ret) { +dev_err (dev,"Failed to register devices (%d)!\n" , ret); + goto out_delete; + } +
Quoted 8 lines
drivers/i2c/busses/i2c-keba.c line 561
Quoted 6 lines
drivers/i2c/busses/i2c-keba.c new file +6
-0+return 0 ; + +out_delete: +i2c_del_adapter (adap); +out_disable: +iowrite8 (0 , ki2c->base +KI2C_CONTROL_REG );Can we define Value '0'?
KI2C_CONTROL_DISABLE, perhaps?
Will be done.
Shall both patches go over i2c-host-next or over char-misc?
Thank you for the review!
Gerhard
Quoted 37 lines
Quoted 37 lines
drivers/i2c/busses/i2c-keba.c new file +34
-0+return ret; +} + +static void ki2c_remove (struct auxiliary_device *auxdev) +{ +struct ki2c *ki2c =auxiliary_get_drvdata (auxdev); + +ki2c_unregister_devices (ki2c); + +i2c_del_adapter (&ki2c->adapter); + +/* disable controller */ +iowrite8 (0 , ki2c->base +KI2C_CONTROL_REG ); + +auxiliary_set_drvdata (auxdev,NULL ); +} + +static const struct auxiliary_device_id ki2c_devtype_aux[] = { + { .name ="keba.i2c" }, + { }, +}; +MODULE_DEVICE_TABLE (auxiliary, ki2c_devtype_aux); + +static struct auxiliary_driver ki2c_driver_aux = { + .name =KI2C , + .id_table = ki2c_devtype_aux, + .probe = ki2c_probe, + .remove = ki2c_remove, +}; +module_auxiliary_driver (ki2c_driver_aux); + +MODULE_AUTHOR ("Gerhard Engleder <[email protected]>" ); +MODULE_DESCRIPTION ("KEBA I2C bus controller driver" ); +MODULE_LICENSE ("GPL" );Signature · 1 line
2.39.2
Greg KH
maintainerQuoted 7 lines · Gerhard Engleder
KEBA PLCs use a PCIe FPGA to implement several functions in a common way. This is a first step to include basic support for this FPGA.
Under
drivers/miscthe cp500 PCI driver is added. This drivers creates auxiliary devices for every function inside the FPGA. As a first step it only creates auxiliary devices for the I2C controllers.
Quoted 5 lines
The I2C controller driver is added under
drivers/i2c/busseslike all the other I2C controller drivers.This patches enable access to the EEPROMs and to the hardware monitoring chip of KEBA PLCs.
I've applied patch 1/2 to my char-misc tree, nice work!
I'll wait for an ack from the i2c maintainers before applying that one, or it can come in through the i2c tree after 6.11-rc1 is out.
thanks,
greg k-h