dt-bindings: net: dwmac: Validate PBL for all IP-cores
Subsystems (3)
PATCH 1/1 dt-bindings: net: dwmac: Validate PBL for all IP-cores
Indeed the maximum DMA burst length can be programmed not only for DW xGMACs, Allwinner EMACs and Spear SoC GMAC, but in accordance with [1, 2, 3] for Generic DW *MAC IP-cores. Moreover the STMMAC driver parses the property and then apply the configuration for all supported DW MAC devices. All of that makes the property being available for all IP-cores the bindings supports. Let's make sure the PBL-related properties are validated for all of them by the common DW *MAC DT schema.
[1] DesignWare Cores Ethernet MAC Universal Databook, Revision 3.73a,
October 2013, p.378.
[2] DesignWare Cores Ethernet Quality-of-Service Databook, Revision 5.10a,
December 2017, p.1223.
[3] DesignWare Cores XGMAC - 10G Ethernet MAC Databook, Revision 2.11a,
September 2015, p.469-473.
---
The discussion where we agreed to submit this change:
--- .../devicetree/bindings/net/snps,dwmac.yaml | 80 ++++++------------- 1 file changed, 26 insertions(+), 54 deletions(-)
Documentation/devicetree/bindings/net/snps,dwmac.yaml +26 -54
@@ -447,6 +447,32 @@ properties: description: Use Address-Aligned Beats + snps,pbl: + description: + Programmable Burst Length (tx and rx) + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 4, 8, 16, 32] + + snps,txpbl: + description: + Tx Programmable Burst Length. If set, DMA tx will use this + value rather than snps,pbl. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 4, 8, 16, 32] + + snps,rxpbl: + description: + Rx Programmable Burst Length. If set, DMA rx will use this + value rather than snps,pbl. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 4, 8, 16, 32] + + snps,no-pbl-x8: + $ref: /schemas/types.yaml#/definitions/flag + description: + Don\'t multiply the pbl/txpbl/rxpbl values by 8. For core + rev < 3.50, don\'t multiply the values by 4. + snps,fixed-burst: $ref: /schemas/types.yaml#/definitions/flag description:
@@ -577,60 +603,6 @@ dependencies: allOf: - $ref: ethernet-controller.yaml# - - if: - properties: - compatible: - contains: - enum: - - allwinner,sun7i-a20-gmac - - allwinner,sun8i-a83t-emac - - allwinner,sun8i-h3-emac - - allwinner,sun8i-r40-gmac - - allwinner,sun8i-v3s-emac - - allwinner,sun50i-a64-emac - - ingenic,jz4775-mac - - ingenic,x1000-mac - - ingenic,x1600-mac - - ingenic,x1830-mac - - ingenic,x2000-mac - - qcom,sa8775p-ethqos - - qcom,sc8280xp-ethqos - - snps,dwmac-3.50a - - snps,dwmac-4.10a - - snps,dwmac-4.20a - - snps,dwmac-5.20 - - snps,dwxgmac - - snps,dwxgmac-2.10 - - st,spear600-gmac - - then: - properties: - snps,pbl: - description: - Programmable Burst Length (tx and rx) - $ref: /schemas/types.yaml#/definitions/uint32 - enum: [1, 2, 4, 8, 16, 32] - - snps,txpbl: - description: - Tx Programmable Burst Length. If set, DMA tx will use this - value rather than snps,pbl. - $ref: /schemas/types.yaml#/definitions/uint32 - enum: [1, 2, 4, 8, 16, 32] - - snps,rxpbl: - description: - Rx Programmable Burst Length. If set, DMA rx will use this - value rather than snps,pbl. - $ref: /schemas/types.yaml#/definitions/uint32 - enum: [1, 2, 4, 8, 16, 32] - - snps,no-pbl-x8: - $ref: /schemas/types.yaml#/definitions/flag - description: - Don\'t multiply the pbl/txpbl/rxpbl values by 8. For core - rev < 3.50, don\'t multiply the values by 4. - - if: properties: compatible:
Signature · 1 line
2.43.0
Quoted 7 lines · Serge Semin
Indeed the maximum DMA burst length can be programmed not only for DW xGMACs, Allwinner EMACs and Spear SoC GMAC, but in accordance with [1, 2, 3] for Generic DW *MAC IP-cores. Moreover the STMMAC driver parses the property and then apply the configuration for all supported DW MAC devices. All of that makes the property being available for all IP-cores the bindings supports. Let's make sure the PBL-related properties are validated for all of them by the common DW *MAC DT schema.
I'd been leaving this one for Rob, given the earlier discussion - but I had one (minor) comment about the commit message here. I think it is fine for the kernel to unconditionally read a property if present, with no regard for the compatible in question, and to rely on the binding ensuring that the properties are not used where invalid. IOW, I don't think that that is a relevant justification for making the properties available on all hardware.
However, as you say, it seems like all versions of the core actually do support the features the properties control and therefore the patch is perfectly fine. I just wanted to ~comment on~nitpick that portion of the commit message.
Thanks,
Conor.
Quoted 122 lines
[1] DesignWare Cores Ethernet MAC Universal Databook, Revision 3.73a,
October 2013, p.378.[2] DesignWare Cores Ethernet Quality-of-Service Databook, Revision 5.10a,
December 2017, p.1223.[3] DesignWare Cores XGMAC - 10G Ethernet MAC Databook, Revision 2.11a,
September 2015, p.469-473.Signed-off-by Serge Semin <[email protected]>---
The discussion where we agreed to submit this change:
--- .../devicetree/bindings/net/snps,dwmac.yaml | 80 ++++++------------- 1 file changed, 26 insertions(+), 54 deletions(-)Documentation/devicetree/bindings/net/snps,dwmac.yaml +26
-54@@ -447,6 +447,32 @@ properties: description: Use Address-Aligned Beats + snps,pbl: + description: + Programmable Burst Length (tx and rx) + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 4, 8, 16, 32] + + snps,txpbl: + description: + Tx Programmable Burst Length. If set, DMA tx will use this + value rather than snps,pbl. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 4, 8, 16, 32] + + snps,rxpbl: + description: + Rx Programmable Burst Length. If set, DMA rx will use this + value rather than snps,pbl. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 4, 8, 16, 32] + + snps,no-pbl-x8: + $ref: /schemas/types.yaml#/definitions/flag + description: + Don\'t multiply the pbl/txpbl/rxpbl values by 8. For core + rev < 3.50, don\'t multiply the values by 4. + snps,fixed-burst: $ref: /schemas/types.yaml#/definitions/flag description:@@ -577,60 +603,6 @@ dependencies: allOf: - $ref: ethernet-controller.yaml# - - if: - properties: - compatible: - contains: - enum: - - allwinner,sun7i-a20-gmac - - allwinner,sun8i-a83t-emac - - allwinner,sun8i-h3-emac - - allwinner,sun8i-r40-gmac - - allwinner,sun8i-v3s-emac - - allwinner,sun50i-a64-emac - - ingenic,jz4775-mac - - ingenic,x1000-mac - - ingenic,x1600-mac - - ingenic,x1830-mac - - ingenic,x2000-mac - - qcom,sa8775p-ethqos - - qcom,sc8280xp-ethqos - - snps,dwmac-3.50a - - snps,dwmac-4.10a - - snps,dwmac-4.20a - - snps,dwmac-5.20 - - snps,dwxgmac - - snps,dwxgmac-2.10 - - st,spear600-gmac - - then: - properties: - snps,pbl: - description: - Programmable Burst Length (tx and rx) - $ref: /schemas/types.yaml#/definitions/uint32 - enum: [1, 2, 4, 8, 16, 32] - - snps,txpbl: - description: - Tx Programmable Burst Length. If set, DMA tx will use this - value rather than snps,pbl. - $ref: /schemas/types.yaml#/definitions/uint32 - enum: [1, 2, 4, 8, 16, 32] - - snps,rxpbl: - description: - Rx Programmable Burst Length. If set, DMA rx will use this - value rather than snps,pbl. - $ref: /schemas/types.yaml#/definitions/uint32 - enum: [1, 2, 4, 8, 16, 32] - - snps,no-pbl-x8: - $ref: /schemas/types.yaml#/definitions/flag - description: - Don\'t multiply the pbl/txpbl/rxpbl values by 8. For core - rev < 3.50, don\'t multiply the values by 4. - - if: properties: compatible:Signature · 1 line
2.43.0
Quoted 19 lines · Serge Semin
Indeed the maximum DMA burst length can be programmed not only for DW xGMACs, Allwinner EMACs and Spear SoC GMAC, but in accordance with [1, 2, 3] for Generic DW *MAC IP-cores. Moreover the STMMAC driver parses the property and then apply the configuration for all supported DW MAC devices. All of that makes the property being available for all IP-cores the bindings supports. Let's make sure the PBL-related properties are validated for all of them by the common DW *MAC DT schema.
[1] DesignWare Cores Ethernet MAC Universal Databook, Revision 3.73a,
October 2013, p.378.[2] DesignWare Cores Ethernet Quality-of-Service Databook, Revision 5.10a,
December 2017, p.1223.[3] DesignWare Cores XGMAC - 10G Ethernet MAC Databook, Revision 2.11a,
September 2015, p.469-473.Signed-off-by Serge Semin <[email protected]>
Quoted 9 lines
---
The discussion where we agreed to submit this change:
--- .../devicetree/bindings/net/snps,dwmac.yaml | 80 ++++++------------- 1 file changed, 26 insertions(+), 54 deletions(-)
This patch was applied to netdev/net-next.git (main) by Paolo Abeni <[email protected]>:
Hello:
This patch was applied to netdev/net-next.git (main) by Paolo Abeni <[email protected]>:
Quoted 9 lines · On Fri, 28 Jun 2024 18:45:12 +0300 you wrote:
Indeed the maximum DMA burst length can be programmed not only for DW xGMACs, Allwinner EMACs and Spear SoC GMAC, but in accordance with [1, 2, 3] for Generic DW *MAC IP-cores. Moreover the STMMAC driver parses the property and then apply the configuration for all supported DW MAC devices. All of that makes the property being available for all IP-cores the bindings supports. Let's make sure the PBL-related properties are validated for all of them by the common DW *MAC DT schema.
[...]
Here is the summary with links:
- [net-next] dt-bindings: net: dwmac: Validate PBL for all IP-cores
https://git.kernel.org/netdev/net-next/c/d01e0e98de31
You are awesome, thank you!
Signature · 2 lines
Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html