Add Nuvoton NPCM SGPIO feature
Subsystems (3)
Tomer Maimon
maintainerv2 cover Add Nuvoton NPCM SGPIO feature
This SGPIO controller is for NUVOTON NPCM7xx and NPCM8xx SoC. Nuvoton NPCM SGPIO module is combine serial to parallel IC (HC595) and parallel to serial IC (HC165), and use APB3 clock to control it. This interface has 4 pins (D_out , D_in, S_CLK, LDSH). NPCM7xx/NPCM8xx have two sgpio module each module can support up to 64 output pins,and up to 64 input pin, the pin is only for GPI or GPO.
The NPCM SGPIO patchset is upstream to Linux vanilla.
V1 changes:
1. Fix sgpio irq handle error.
Tomer Maimon (2):
dt-bindings: gpio: add NPCM sgpio driver bindings
gpio: nuvoton: Add Nuvoton NPCM sgpio driver
.../bindings/gpio/nuvoton,sgpio.yaml | 87 +++ drivers/gpio/Kconfig | 7 + drivers/gpio/Makefile | 1 + drivers/gpio/gpio-npcm-sgpio.c | 617 ++++++++++++++++++ 4 files changed, 712 insertions(+) create mode 100644 Documentation/devicetree/bindings/gpio/nuvoton,sgpio.yaml create mode 100644 drivers/gpio/gpio-npcm-sgpio.c
Signature · 1 line
2.34.1
Tomer Maimon
maintainerPATCH v2 1/2 dt-bindings: gpio: add NPCM sgpio driver bindings
Add dt-bindings document for the Nuvoton NPCM7xx sgpio driver
--- .../bindings/gpio/nuvoton,sgpio.yaml | 87 +++++++++++++++++++ 1 file changed, 87 insertions(+) create mode 100644 Documentation/devicetree/bindings/gpio/nuvoton,sgpio.yaml
Documentation/devicetree/bindings/gpio/nuvoton,sgpio.yaml new file +87 -0
@@ -0,0 +1,87 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/nuvoton,sgpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Nuvoton SGPIO controller + +maintainers: + - Jim LIU <[email protected]> + +description: | + This SGPIO controller is for NUVOTON NPCM7xx and NPCM8xx SoC and detailed + information is in the NPCM7XX/8XX SERIAL I/O EXPANSION INTERFACE section. + Nuvoton NPCM7xx SGPIO module is combines a serial to parallel IC (HC595) + and a parallel to serial IC (HC165). + Clock is a division of the APB3 clock. + This interface has 4 pins (D_out , D_in, S_CLK, LDSH). + NPCM7xx/NPCM8xx have two sgpio modules. Each module can support up + to 64 output pins, and up to 64 input pins, the pin is only for GPI or GPO. + GPIO pins can be programmed to support the following options + - Support interrupt option for each input port and various interrupt + sensitivity options (level-high, level-low, edge-high, edge-low) + - ngpios is number of nuvoton,input-ngpios GPIO lines and nuvoton,output-ngpios GPIO lines. + nuvoton,input-ngpios GPIO lines is only for GPI. + nuvoton,output-ngpios GPIO lines is only for GPO. + +properties: + compatible: + enum: + - nuvoton,npcm750-sgpio + - nuvoton,npcm845-sgpio + + reg: + maxItems: 1 + + gpio-controller: true + + '#gpio-cells': + const: 2 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + nuvoton,input-ngpios: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The numbers of GPIO's exposed. GPIO lines are only for GPI. + minimum: 0 + maximum: 64 + + nuvoton,output-ngpios: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The numbers of GPIO's exposed. GPIO lines are only for GPO. + minimum: 0 + maximum: 64 + +required: + - compatible + - reg + - gpio-controller + - '#gpio-cells' + - interrupts + - nuvoton,input-ngpios + - nuvoton,output-ngpios + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/nuvoton,npcm7xx-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + gpio8: gpio@101000 { + compatible = "nuvoton,npcm750-sgpio"; + reg = <0x101000 0x200>; + clocks = <&clk NPCM7XX_CLK_APB3>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + nuvoton,input-ngpios = <64>; + nuvoton,output-ngpios = <64>; + };
Signature · 1 line
2.34.1
Tomer Maimon
maintainerPATCH v2 2/2 gpio: nuvoton: Add Nuvoton NPCM sgpio driver
In reply to Tomer MaimonAdd Nuvoton BMC NPCM7xx/NPCM8xx sgpio driver support. Nuvoton NPCM SGPIO module is combine serial to parallel IC (HC595) and parallel to serial IC (HC165), and use APB3 clock to control it. This interface has 4 pins (D_out , D_in, S_CLK, LDSH).
BMC can use this driver to increase 64 GPI pins and 64 GPO pins to use.
--- drivers/gpio/Kconfig | 7 + drivers/gpio/Makefile | 1 + drivers/gpio/gpio-npcm-sgpio.c | 617 +++++++++++++++++++++++++++++++++ 3 files changed, 625 insertions(+) create mode 100644 drivers/gpio/gpio-npcm-sgpio.c
drivers/gpio/Kconfig +7 -0
@@ -478,6 +478,13 @@ config GPIO_MXS select GPIO_GENERIC select GENERIC_IRQ_CHIP +config GPIO_NPCM_SGPIO + bool "Nuvoton SGPIO support" + depends on ARCH_NPCM || COMPILE_TEST + select GPIOLIB_IRQCHIP + help + Say Y here to support Nuvoton NPCM7XX/NPCM8XX SGPIO functionality. + config GPIO_OCTEON tristate "Cavium OCTEON GPIO" depends on CAVIUM_OCTEON_SOC
drivers/gpio/Makefile +1 -0
@@ -116,6 +116,7 @@ obj-$(CONFIG_GPIO_MT7621) += gpio-mt7621.o obj-$(CONFIG_GPIO_MVEBU) += gpio-mvebu.o obj-$(CONFIG_GPIO_MXC) += gpio-mxc.o obj-$(CONFIG_GPIO_MXS) += gpio-mxs.o +obj-$(CONFIG_GPIO_NPCM_SGPIO) += gpio-npcm-sgpio.o obj-$(CONFIG_GPIO_OCTEON) += gpio-octeon.o obj-$(CONFIG_GPIO_OMAP) += gpio-omap.o obj-$(CONFIG_GPIO_PALMAS) += gpio-palmas.o
drivers/gpio/gpio-npcm-sgpio.c new file +617 -0
617 lines not on this page · raw message
Signature · 1 line
2.34.1
Andrew Jeffery
maintainerQuoted 8 lines · Tomer Maimon
This SGPIO controller is for NUVOTON NPCM7xx and NPCM8xx SoC. Nuvoton NPCM SGPIO module is combine serial to parallel IC (HC595) and parallel to serial IC (HC165), and use APB3 clock to control it. This interface has 4 pins (
D_out,D_in,S_CLK, LDSH). NPCM7xx/NPCM8xx have two sgpio module each module can support up to 64 output pins,and up to 64 input pin, the pin is only for GPI or GPO.The NPCM SGPIO patchset is upstream to Linux vanilla.
Thanks, I've applied these to openbmc/linux dev-6.6.
andrew