board: phytec: k3: k3_ddrss_patch: Add ddr phy reg count
PATCH 1/1 board: phytec: k3: k3_ddrss_patch: Add ddr phy reg count
Add and use the correct number of ddr phy registers to update the corresponding settings.
Fixes cbf5c99ef317 ("board: phytec: common: Introduce a method to inject DDR timings deltas")
Signed-off-by Dominik Haller <[email protected]>
--- board/phytec/common/k3/k3_ddrss_patch.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
board/phytec/common/k3/k3_ddrss_patch.c +2 -1
@@ -12,6 +12,7 @@#ifdef CONFIG_K3_AM64_DDRSS #define LPDDR4_INTR_CTL_REG_COUNT (423U)#define LPDDR4_INTR_PHY_INDEP_REG_COUNT (345U) +#define LPDDR4_INTR_PHY_REG_COUNT (1406U)#endif static int fdt_setprop_inplace_idx_u32(void *fdt, int nodeoffset,
@@ -54,7 +55,7 @@ int fdt_apply_ddrss_timings_patch(void *fdt, struct ddrss *ddrss)return ret; } -for (i =0 ; i <LPDDR4_INTR_PHY_INDEP_REG_COUNT ; i++) +for (i =0 ; i <LPDDR4_INTR_PHY_REG_COUNT ; i++)for (j =0 ; j < ddrss->phy_regs_num; j++)if (i == ddrss->phy_regs[j].off) { ret = fdt_setprop_inplace_idx_u32(fdt,
Signature · 1 line
2.25.1
Am 02.07.24 um 11:22 schrieb Dominik Haller:
Quoted 5 lines
Add and use the correct number of ddr phy registers to update the corresponding settings.
Fixes cbf5c99ef317 ("board: phytec: common: Introduce a method to inject DDR timings deltas")Signed-off-by Dominik Haller <[email protected]>
Reviewed-by Wadim Egorov <[email protected]>
Quoted 25 lines
--- board/phytec/common/k3/k3_ddrss_patch.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)board/phytec/common/k3/k3_ddrss_patch.c +2
-1@@ -12,6 +12,7 @@#ifdef CONFIG_K3_AM64_DDRSS #define LPDDR4_INTR_CTL_REG_COUNT (423U)#define LPDDR4_INTR_PHY_INDEP_REG_COUNT (345U) +#define LPDDR4_INTR_PHY_REG_COUNT (1406U)#endif static int fdt_setprop_inplace_idx_u32(void *fdt, int nodeoffset,@@ -54,7 +55,7 @@ int fdt_apply_ddrss_timings_patch(void *fdt, struct ddrss *ddrss)return ret; } -for (i =0 ; i <LPDDR4_INTR_PHY_INDEP_REG_COUNT ; i++) +for (i =0 ; i <LPDDR4_INTR_PHY_REG_COUNT ; i++)for (j =0 ; j < ddrss->phy_regs_num; j++)if (i == ddrss->phy_regs[j].off) { ret = fdt_setprop_inplace_idx_u32(fdt,
Quoted 4 lines · Dominik Haller
Add and use the correct number of ddr phy registers to update the corresponding settings.
Applied to u-boot/master, thanks!
Signature · 1 line
Tom