hw/char/pl011: Avoid division-by-zero in pl011_get_baudrate()
PATCH v3 1/1 hw/char/pl011: Avoid division-by-zero in pl011_get_baudrate()
In pl011_get_baudrate(), when we calculate the baudrate we can accidentally divide by zero. This happens because although (as the specification requires) we treat UARTIBRD = 0 as invalid, we aren't correctly limiting UARTIBRD and UARTFBRD values to the 16-bit and 6-bit ranges the hardware allows, and so some non-zero values of UARTIBRD can result in a zero divisor.
Enforce the correct register field widths on guest writes and on inbound migration to avoid the division by zero.
ASAN log:
==2973125==ERROR: AddressSanitizer: FPE on unknown address 0x55f72629b348 (pc 0x55f72629b348 bp 0x7fffa24d0e00 sp 0x7fffa24d0d60 T0)
#0 0x55f72629b348 in pl011_get_baudrate hw/char/pl011.c:255:17
#1 0x55f726298d94 in pl011_trace_baudrate_change hw/char/pl011.c:260:33
#2 0x55f726296fc8 in pl011_write hw/char/pl011.c:378:9Reproducer:
cat << EOF | qemu-system-aarch64 -display \
none -machine accel=qtest, -m 512M -machine realview-pb-a8 -qtest stdio writeq 0x1000b024 0xf8000000
EOF
---
Changes in v3:
- Defined masks for UARTIBRD and UARTFBRD to avoid magic numbers. Changes in v2:
- Enforce the correct register field widths on writes to both UARTIBRD and UARTFBRD registers.
- Mask UARTIBRD to 16 bits and UARTFBRD to 6 bits in the pl011_post_load function to prevent division by zero during inbound migration.
--- hw/char/pl011.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-)
hw/char/pl011.c +11 -2
@@ -87,6 +87,12 @@ DeviceState *pl011_create(hwaddr addr, qemu_irq irq, Chardev *chr)#define CR_DTR (1 << 10)#define CR_LBE (1 << 7) +/* Integer Baud Rate Divider, UARTIBRD */ +#define IBRD_MASK 0x3f + +/* Fractional Baud Rate Divider, UARTFBRD */ +#define FBRD_MASK 0xffff +static const unsigned char pl011_id_arm[8 ] = {0x11 ,0x10 ,0x14 ,0x00 ,0x0d ,0xf0 ,0x05 ,0xb1 }; static const unsigned char pl011_id_luminary[8] =
@@ -374,11 +380,11 @@ static void pl011_write(void *opaque, hwaddr offset, s->ilpr = value;break ;case 9 :/* UARTIBRD */ - s->ibrd = value; + s->ibrd = value &IBRD_MASK ;pl011_trace_baudrate_change (s);break ;case 10 :/* UARTFBRD */ - s->fbrd = value; + s->fbrd = value &FBRD_MASK ;pl011_trace_baudrate_change (s);break ;case 11 :/* UARTLCR_H */
@@ -531,6 +537,9 @@ static int pl011_post_load(void *opaque, int version_id) s->read_pos =0 ; } + s->ibrd &=IBRD_MASK ; + s->fbrd &=FBRD_MASK ; +return 0 ; }
Signature · 1 line
2.34.1
Quoted 17 lines · Zheyu Ma
In
pl011_get_baudrate(), when we calculate the baudrate we can accidentally divide by zero. This happens because although (as the specification requires) we treat UARTIBRD = 0 as invalid, we aren't correctly limiting UARTIBRD and UARTFBRD values to the 16-bit and 6-bit ranges the hardware allows, and so some non-zero values of UARTIBRD can result in a zero divisor.Enforce the correct register field widths on guest writes and on inbound migration to avoid the division by zero.
ASAN log:
==2973125==ERROR: AddressSanitizer: FPE on unknown address0x55f72629b348(pc0x55f72629b348bp0x7fffa24d0e00sp0x7fffa24d0d60T0)#0 0x55f72629b348 in pl011_get_baudrate hw/char/pl011.c:255:17 #1 0x55f726298d94 in pl011_trace_baudrate_change hw/char/pl011.c:260:33 #2 0x55f726296fc8 in pl011_write hw/char/pl011.c:378:9
Quoted 7 lines
Reproducer:
cat << EOF | qemu-system-aarch64 -display \
none -machine accel=qtest, -m 512M -machine realview-pb-a8 -qtest stdio writeq0x1000b0240xf8000000
EOFSuggested-by Philippe Mathieu-Daudé <[email protected]>
Peter, feel free to replace that line by:
Quoted 5 lines
Suggested-by Peter Maydell <[email protected]>Signed-off-by Zheyu Ma <[email protected]>---
Changes in v3:
- Defined masks for UARTIBRD and UARTFBRD to avoid magic numbers.
Thanks Zheyu!
Quoted 8 lines
Changes in v2:
- Enforce the correct register field widths on writes to both UARTIBRD and UARTFBRD registers.
- Mask UARTIBRD to 16 bits and UARTFBRD to 6 bits in thepl011_post_loadfunction to prevent division by zero during inbound migration.--- hw/char/pl011.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-)
Quoted 25 lines · Philippe Mathieu-Daudé
Quoted 23 lines · Zheyu Ma
In
pl011_get_baudrate(), when we calculate the baudrate we can accidentally divide by zero. This happens because although (as the specification requires) we treat UARTIBRD = 0 as invalid, we aren't correctly limiting UARTIBRD and UARTFBRD values to the 16-bit and 6-bit ranges the hardware allows, and so some non-zero values of UARTIBRD can result in a zero divisor.Enforce the correct register field widths on guest writes and on inbound migration to avoid the division by zero.
ASAN log:
==2973125==ERROR: AddressSanitizer: FPE on unknown address0x55f72629b348(pc0x55f72629b348bp0x7fffa24d0e00sp0x7fffa24d0d60T0)#0 0x55f72629b348 in pl011_get_baudrate hw/char/pl011.c:255:17 #1 0x55f726298d94 in pl011_trace_baudrate_change hw/char/pl011.c:260:33 #2 0x55f726296fc8 in pl011_write hw/char/pl011.c:378:9Reproducer:
cat << EOF | qemu-system-aarch64 -display \
none -machine accel=qtest, -m 512M -machine realview-pb-a8 -qtest stdio writeq0x1000b0240xf8000000
EOF
Quoted 4 lines
Quoted 1 line
Suggested-by Philippe Mathieu-Daudé <[email protected]>Peter, feel free to replace that line by:
Reviewed-by Philippe Mathieu-Daudé <[email protected]>
OK; applied to target-arm.next, thanks.
-- PMM