arm64: dts: layerscape: add msi-cell = <1> for gic its
Subsystems (2)
Frank Li
maintainerPATCH 1/5 arm64: dts: layerscape: add msi-cell = <1> for gic its
Add msi-cell = <1> for GIC ITS. msi-parent have to be kept because it is checked by U-Boot due to historical reasons to fix up msi-map.
Fix below CHECK_DTBS warning:arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dtb: interrupt-controller@6000000: msi-controller@6020000: '#msi-cells' is a required property
from schema $id: http://devicetree.org/schemas/interrupt-controller/arm,gic-v3.yaml
--- arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 7 ++++--- arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 9 +++++---- arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 11 ++++++----- arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 15 ++++++++------- 4 files changed, 23 insertions(+), 19 deletions(-)
arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +4 -3
@@ -150,6 +150,7 @@ gic: interrupt-controller@6000000 { its: msi-controller@6020000 { compatible = "arm,gic-v3-its"; msi-controller; + #msi-cells = <1>; reg = <0x0 0x06020000 0 0x20000>;/* GIC Translater */ }; };
@@ -662,7 +663,7 @@ pcie1: pcie@3400000 { bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x80 0x00010000 0x0 0x00010000 /* downstream I/O */ 0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ - msi-parent = <&its>; + msi-parent = <&its 0>; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
@@ -701,7 +702,7 @@ pcie2: pcie@3500000 { bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x88 0x00010000 0x0 0x00010000 /* downstream I/O */ 0x82000000 0x0 0x40000000 0x88 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ - msi-parent = <&its>; + msi-parent = <&its 0>; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
@@ -1080,7 +1081,7 @@ pcie@1f0000000 { /* Integrated Endpoint Root Complex */ reg = <0x01 0xf0000000 0x0 0x100000>; #address-cells = <3>; #size-cells = <2>; - msi-parent = <&its>; + msi-parent = <&its 0>; device_type = "pci"; bus-range = <0x0 0x0>; dma-coherent;
arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi +5 -4
@@ -126,6 +126,7 @@ gic: interrupt-controller@6000000 { its: msi-controller@6020000 { compatible = "arm,gic-v3-its"; msi-controller; + #msi-cells = <1>; reg = <0x0 0x6020000 0 0x20000>; }; };
@@ -575,7 +576,7 @@ pcie1: pcie@3400000 { bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x20 0x00010000 0x0 0x00010000 /* downstream I/O */ 0x82000000 0x0 0x40000000 0x20 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ - msi-parent = <&its>; + msi-parent = <&its 0>; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0000 0 0 1 &gic 0 0 0 109 IRQ_TYPE_LEVEL_HIGH>,
@@ -614,7 +615,7 @@ pcie2: pcie@3500000 { bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x28 0x00010000 0x0 0x00010000 /* downstream I/O */ 0x82000000 0x0 0x40000000 0x28 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ - msi-parent = <&its>; + msi-parent = <&its 0>; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0000 0 0 1 &gic 0 0 0 114 IRQ_TYPE_LEVEL_HIGH>,
@@ -652,7 +653,7 @@ pcie3: pcie@3600000 { bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x30 0x00010000 0x0 0x00010000 /* downstream I/O */ 0x82000000 0x0 0x40000000 0x30 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ - msi-parent = <&its>; + msi-parent = <&its 0>; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0000 0 0 1 &gic 0 0 0 119 IRQ_TYPE_LEVEL_HIGH>,
@@ -964,7 +965,7 @@ fsl_mc: fsl-mc@80c000000 { compatible = "fsl,qoriq-mc"; reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */ <0x00000000 0x08340000 0 0x40000>; /* MC control reg */ - msi-parent = <&its>; + msi-parent = <&its 0>; iommu-map = <0 &smmu 0 0>; /* This is fixed-up by u-boot */ dma-coherent; #address-cells = <3>;
arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi +6 -5
@@ -63,6 +63,7 @@ gic: interrupt-controller@6000000 { its: msi-controller@6020000 { compatible = "arm,gic-v3-its"; msi-controller; + #msi-cells = <1>; reg = <0x0 0x6020000 0 0x20000>; }; };
@@ -758,7 +759,7 @@ fsl_mc: fsl-mc@80c000000 { compatible = "fsl,qoriq-mc"; reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */ <0x00000000 0x08340000 0 0x40000>; /* MC control reg */ - msi-parent = <&its>; + msi-parent = <&its 0>; iommu-map = <0 &smmu 0 0>; /* This is fixed-up by u-boot */ dma-coherent; #address-cells = <3>;
@@ -1085,7 +1086,7 @@ pcie1: pcie@3400000 { dma-coherent; num-viewport = <6>; bus-range = <0x0 0xff>; - msi-parent = <&its>; + msi-parent = <&its 0>; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0000 0 0 1 &gic 0 0 0 109 4>,
@@ -1107,7 +1108,7 @@ pcie2: pcie@3500000 { dma-coherent; num-viewport = <6>; bus-range = <0x0 0xff>; - msi-parent = <&its>; + msi-parent = <&its 0>; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0000 0 0 1 &gic 0 0 0 114 4>,
@@ -1129,7 +1130,7 @@ pcie3: pcie@3600000 { dma-coherent; num-viewport = <256>; bus-range = <0x0 0xff>; - msi-parent = <&its>; + msi-parent = <&its 0>; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0000 0 0 1 &gic 0 0 0 119 4>,
@@ -1151,7 +1152,7 @@ pcie4: pcie@3700000 { dma-coherent; num-viewport = <6>; bus-range = <0x0 0xff>; - msi-parent = <&its>; + msi-parent = <&its 0>; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0000 0 0 1 &gic 0 0 0 124 4>,
arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +8 -7
@@ -398,6 +398,7 @@ gic: interrupt-controller@6000000 { its: msi-controller@6020000 { compatible = "arm,gic-v3-its"; msi-controller; + #msi-cells = <1>; reg = <0x0 0x6020000 0 0x20000>; }; };
@@ -1181,7 +1182,7 @@ pcie1: pcie@3400000 { ppio-wins = <8>; bus-range = <0x0 0xff>; ranges = <0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ - msi-parent = <&its>; + msi-parent = <&its 0>; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
@@ -1209,7 +1210,7 @@ pcie2: pcie@3500000 { ppio-wins = <8>; bus-range = <0x0 0xff>; ranges = <0x82000000 0x0 0x40000000 0x88 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ - msi-parent = <&its>; + msi-parent = <&its 0>; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
@@ -1237,7 +1238,7 @@ pcie3: pcie@3600000 { ppio-wins = <24>; bus-range = <0x0 0xff>; ranges = <0x82000000 0x0 0x40000000 0x90 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ - msi-parent = <&its>; + msi-parent = <&its 0>; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
@@ -1265,7 +1266,7 @@ pcie4: pcie@3700000 { ppio-wins = <8>; bus-range = <0x0 0xff>; ranges = <0x82000000 0x0 0x40000000 0x98 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ - msi-parent = <&its>; + msi-parent = <&its 0>; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
@@ -1293,7 +1294,7 @@ pcie5: pcie@3800000 { ppio-wins = <24>; bus-range = <0x0 0xff>; ranges = <0x82000000 0x0 0x40000000 0xa0 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ - msi-parent = <&its>; + msi-parent = <&its 0>; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
@@ -1321,7 +1322,7 @@ pcie6: pcie@3900000 { ppio-wins = <8>; bus-range = <0x0 0xff>; ranges = <0x82000000 0x0 0x40000000 0xa8 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ - msi-parent = <&its>; + msi-parent = <&its 0>; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
@@ -1777,7 +1778,7 @@ fsl_mc: fsl-mc@80c000000 { compatible = "fsl,qoriq-mc"; reg = <0x00000008 0x0c000000 0 0x40>, <0x00000000 0x08340000 0 0x40000>; - msi-parent = <&its>; + msi-parent = <&its 0>; /* iommu-map property is fixed up by u-boot */ iommu-map = <0 &smmu 0 0>; dma-coherent;
Signature · 1 line
2.34.1
Frank Li
maintainerPATCH 2/5 arm64: dts: layerscape: remove big-endian for mmc nodes
According to binding doc fsl,esdhc.yaml, the default endian mode is big-endian. So remove big-endian property to fix below CHECK_DTBS warnings:
arm64/boot/dts/freescale/fsl-ls1012a-qds.dtb: mmc@1560000: Unevaluated properties are not allowed ('big-endian' was unexpected)
from schema $id: http://devicetree.org/schemas/mmc/fsl,esdhc.yaml
--- arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 2 -- arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 1 - arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 2 -- 3 files changed, 5 deletions(-)
arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi +0 -2
@@ -164,7 +164,6 @@ esdhc0: mmc@1560000 { QORIQ_CLK_PLL_DIV(1)>; voltage-ranges = <1800 1800 3300 3300>; sdhci,auto-cmd12; - big-endian; bus-width = <4>; status = "disabled"; };
@@ -183,7 +182,6 @@ esdhc1: mmc@1580000 { QORIQ_CLK_PLL_DIV(1)>; voltage-ranges = <1800 1800 3300 3300>; sdhci,auto-cmd12; - big-endian; broken-cd; bus-width = <4>; status = "disabled";
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +0 -1
@@ -431,7 +431,6 @@ esdhc: mmc@1560000 { clock-frequency = <0>; voltage-ranges = <1800 1800 3300 3300>; sdhci,auto-cmd12; - big-endian; bus-width = <4>; };
arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi +0 -2
@@ -315,7 +315,6 @@ esdhc: mmc@1560000 { clocks = <&clockgen QORIQ_CLK_HWACCEL 1>; voltage-ranges = <1800 1800 3300 3300>; sdhci,auto-cmd12; - big-endian; bus-width = <4>; };
@@ -694,7 +693,6 @@ wdog0: watchdog@2ad0000 { interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(2)>; - big-endian; }; edma0: dma-controller@2c00000 {
Signature · 1 line
2.34.1
Frank Li
maintainerPATCH 3/5 arm64: dts: fsl-ls1046a: remove big-endian at memory-controller
In reply to Frank LiAccording to binding doc fsl,ddr.yaml, big-endian is default setting. So remove it to fix below CHECK_DTBS warnings.
arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dtb: memory-controller@1080000: 'big-endian' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/memory-controllers/fsl/fsl,ddr.yaml
--- arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 1 - arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 1 - 2 files changed, 2 deletions(-)
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +0 -1
@@ -438,7 +438,6 @@ ddr: memory-controller@1080000 { compatible = "fsl,qoriq-memory-controller"; reg = <0x0 0x1080000 0x0 0x1000>; interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; - big-endian; }; tmu: tmu@1f00000 {
arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi +0 -1
@@ -282,7 +282,6 @@ ddr: memory-controller@1080000 { compatible = "fsl,qoriq-memory-controller"; reg = <0x0 0x1080000 0x0 0x1000>; interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; - big-endian; }; ifc: memory-controller@1530000 {
Signature · 1 line
2.34.1
Frank Li
maintainerPATCH 4/5 arm64: dts: layersacpe: remove undocumented fsl,ls-pcie-ep
In reply to Frank LiRemove undocumented compatible string fsl,ls-pcie-ep to fix belowCHECK_DTBS warning.arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dtb: pcie_ep@3400000: compatible: ['fsl,ls1046a-pcie-ep', 'fsl,ls-pcie-ep'] is too long
from schema $id: http://devicetree.org/schemas/pci/fsl,layerscape-pcie-ep.yaml
--- arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 6 +++--- arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 6 +++--- 2 files changed, 6 insertions(+), 6 deletions(-)
arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi +3 -3
@@ -820,7 +820,7 @@ pcie1: pcie@3400000 { }; pcie_ep1: pcie_ep@3400000 { - compatible = "fsl,ls1046a-pcie-ep","fsl,ls-pcie-ep"; + compatible = "fsl,ls1046a-pcie-ep"; reg = <0x00 0x03400000 0x0 0x00100000>, <0x40 0x00000000 0x8 0x00000000>; reg-names = "regs", "addr_space";
@@ -859,7 +859,7 @@ pcie2: pcie@3500000 { }; pcie_ep2: pcie_ep@3500000 { - compatible = "fsl,ls1046a-pcie-ep","fsl,ls-pcie-ep"; + compatible = "fsl,ls1046a-pcie-ep"; reg = <0x00 0x03500000 0x0 0x00100000>, <0x48 0x00000000 0x8 0x00000000>; reg-names = "regs", "addr_space";
@@ -898,7 +898,7 @@ pcie3: pcie@3600000 { }; pcie_ep3: pcie_ep@3600000 { - compatible = "fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep"; + compatible = "fsl,ls1046a-pcie-ep"; reg = <0x00 0x03600000 0x0 0x00100000>, <0x50 0x00000000 0x8 0x00000000>; reg-names = "regs", "addr_space";
arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi +3 -3
@@ -588,7 +588,7 @@ pcie1: pcie@3400000 { }; pcie_ep1: pcie-ep@3400000 { - compatible = "fsl,ls1088a-pcie-ep", "fsl,ls-pcie-ep"; + compatible = "fsl,ls1088a-pcie-ep"; reg = <0x00 0x03400000 0x0 0x00100000>, <0x20 0x00000000 0x8 0x00000000>; reg-names = "regs", "addr_space";
@@ -627,7 +627,7 @@ pcie2: pcie@3500000 { }; pcie_ep2: pcie-ep@3500000 { - compatible = "fsl,ls1088a-pcie-ep", "fsl,ls-pcie-ep"; + compatible = "fsl,ls1088a-pcie-ep"; reg = <0x00 0x03500000 0x0 0x00100000>, <0x28 0x00000000 0x8 0x00000000>; reg-names = "regs", "addr_space";
@@ -665,7 +665,7 @@ pcie3: pcie@3600000 { }; pcie_ep3: pcie-ep@3600000 { - compatible = "fsl,ls1088a-pcie-ep", "fsl,ls-pcie-ep"; + compatible = "fsl,ls1088a-pcie-ep"; reg = <0x00 0x03600000 0x0 0x00100000>, <0x30 0x00000000 0x8 0x00000000>; reg-names = "regs", "addr_space";
Signature · 1 line
2.34.1
Frank Li
maintainerRe: [PATCH 4/5] arm64: dts: layersacpe: remove undocumented fsl,ls-pcie-ep
sorry, miss spell 'layersacpe', will fix soon.
Quoted 76 lines · Frank Li
Remove undocumented compatible string fsl,ls-pcie-ep to fix below
CHECK_DTBSwarning.arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dtb: pcie_ep@3400000: compatible: ['fsl,ls1046a-pcie-ep', 'fsl,ls-pcie-ep'] is too long
from schema $id: http://devicetree.org/schemas/pci/fsl,layerscape-pcie-ep.yamlSigned-off-by Frank Li <[email protected]>--- arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 6 +++--- arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 6 +++--- 2 files changed, 6 insertions(+), 6 deletions(-)arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi +3
-3@@ -820,7 +820,7 @@ pcie1: pcie@3400000 { }; pcie_ep1: pcie_ep@3400000 { - compatible = "fsl,ls1046a-pcie-ep","fsl,ls-pcie-ep"; + compatible = "fsl,ls1046a-pcie-ep"; reg = <0x00 0x03400000 0x0 0x00100000>, <0x40 0x00000000 0x8 0x00000000>; reg-names = "regs", "addr_space";@@ -859,7 +859,7 @@ pcie2: pcie@3500000 { }; pcie_ep2: pcie_ep@3500000 { - compatible = "fsl,ls1046a-pcie-ep","fsl,ls-pcie-ep"; + compatible = "fsl,ls1046a-pcie-ep"; reg = <0x00 0x03500000 0x0 0x00100000>, <0x48 0x00000000 0x8 0x00000000>; reg-names = "regs", "addr_space";@@ -898,7 +898,7 @@ pcie3: pcie@3600000 { }; pcie_ep3: pcie_ep@3600000 { - compatible = "fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep"; + compatible = "fsl,ls1046a-pcie-ep"; reg = <0x00 0x03600000 0x0 0x00100000>, <0x50 0x00000000 0x8 0x00000000>; reg-names = "regs", "addr_space";arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi +3
-3@@ -588,7 +588,7 @@ pcie1: pcie@3400000 { }; pcie_ep1: pcie-ep@3400000 { - compatible = "fsl,ls1088a-pcie-ep", "fsl,ls-pcie-ep"; + compatible = "fsl,ls1088a-pcie-ep"; reg = <0x00 0x03400000 0x0 0x00100000>, <0x20 0x00000000 0x8 0x00000000>; reg-names = "regs", "addr_space";@@ -627,7 +627,7 @@ pcie2: pcie@3500000 { }; pcie_ep2: pcie-ep@3500000 { - compatible = "fsl,ls1088a-pcie-ep", "fsl,ls-pcie-ep"; + compatible = "fsl,ls1088a-pcie-ep"; reg = <0x00 0x03500000 0x0 0x00100000>, <0x28 0x00000000 0x8 0x00000000>; reg-names = "regs", "addr_space";@@ -665,7 +665,7 @@ pcie3: pcie@3600000 { }; pcie_ep3: pcie-ep@3600000 { - compatible = "fsl,ls1088a-pcie-ep", "fsl,ls-pcie-ep"; + compatible = "fsl,ls1088a-pcie-ep"; reg = <0x00 0x03600000 0x0 0x00100000>, <0x30 0x00000000 0x8 0x00000000>; reg-names = "regs", "addr_space";Signature · 1 line
2.34.1
Frank Li
maintainerPATCH 5/5 arm64: dts: fsl,ls2085a: remove fsl,ls2085a-pcie
In reply to Frank Lifsl,ls2080a-pcie actual is the same as fsl,ls2085a-pcie. Only keep one is enough, so remove "fsl,ls2085a-pcie" to fix below warnings.
arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dtb: pcie@3400000: compatible: ['fsl,ls2080a-pcie', 'fsl,ls2085a-pcie'] is too long
from schema $id: http://devicetree.org/schemas/pci/fsl,layerscape-pcie.yaml#
--- arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi +4 -4
@@ -1076,7 +1076,7 @@ QORIQ_CLK_PLL_DIV(4)>, }; pcie1: pcie@3400000 { - compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie"; + compatible = "fsl,ls2080a-pcie"; reg-names = "regs", "config"; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "intr";
@@ -1098,7 +1098,7 @@ pcie1: pcie@3400000 { }; pcie2: pcie@3500000 { - compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie"; + compatible = "fsl,ls2080a-pcie"; reg-names = "regs", "config"; interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "intr";
@@ -1120,7 +1120,7 @@ pcie2: pcie@3500000 { }; pcie3: pcie@3600000 { - compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie"; + compatible = "fsl,ls2080a-pcie"; reg-names = "regs", "config"; interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "intr";
@@ -1142,7 +1142,7 @@ pcie3: pcie@3600000 { }; pcie4: pcie@3700000 { - compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie"; + compatible = "fsl,ls2080a-pcie"; reg-names = "regs", "config"; interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "intr";
Signature · 1 line
2.34.1