leds: lm3601x: Calculate max_brightness and brightness properly
PATCH v2 1/1 leds: lm3601x: Calculate max_brightness and brightness properly
The torch_current_max should be checked not exceeding the upper bound. If it does, throw a warning message and set to LM3601X_MAX_TORCH_I_UA.
LM3601x torch brigthness register (LM3601X_LED_TORCH_REG) takes 0 as the minimum output (2.4 mA). However, 0 of led_brightness means LED_OFF. Adding a -1 offset to brightness before writing to brightness register, so when users write minimum brightness (1), it sets lm3601x output the minimum.
--- drivers/leds/flash/leds-lm3601x.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-)
drivers/leds/flash/leds-lm3601x.c +12 -3
@@ -190,7 +190,7 @@ static int lm3601x_brightness_set(struct led_classdev *cdev, goto out; } - ret =regmap_write (led->regmap,LM3601X_LED_TORCH_REG , brightness); + ret =regmap_write (led->regmap,LM3601X_LED_TORCH_REG , brightness -1 );if (ret <0 ) goto out;
@@ -341,8 +341,9 @@ static int lm3601x_register_leds(struct lm3601x_led *led, led_cdev = &led->fled_cdev.led_cdev; led_cdev->brightness_set_blocking = lm3601x_brightness_set; - led_cdev->max_brightness =DIV_ROUND_UP (led->torch_current_max, -LM3601X_TORCH_REG_DIV ); + led_cdev->max_brightness = +DIV_ROUND_UP (led->torch_current_max -LM3601X_MIN_TORCH_I_UA +1 , +LM3601X_TORCH_REG_DIV ); led_cdev->flags |=LED_DEV_CAP_FLASH ; init_data.fwnode = fwnode;
@@ -386,6 +387,14 @@ static int lm3601x_parse_node(struct lm3601x_led *led, goto out_err; } +if (led->torch_current_max >LM3601X_MAX_TORCH_I_UA ) { +dev_warn (&led->client->dev, +"Max torch current set too high (%d vs %d)\n" , + led->torch_current_max, +LM3601X_MAX_TORCH_I_UA ); + led->torch_current_max =LM3601X_MAX_TORCH_I_UA ; + } + ret =fwnode_property_read_u32 (child,"flash-max-microamp" , &led->flash_current_max);if (ret) {
Signature · 1 line
2.45.2.803.g4e1b14247a-goog
Re: (subset) [PATCH v2] leds: lm3601x: Calculate max_brightness and brightness properly
Quoted 10 lines · Jack Chen
The
torch_current_maxshould be checked not exceeding the upper bound. If it does, throw a warning message and set toLM3601X_MAX_TORCH_I_UA.LM3601x torch brigthness register (
LM3601X_LED_TORCH_REG) takes 0 as the minimum output (2.4 mA). However, 0 ofled_brightnessmeansLED_OFF. Adding a -1 offset to brightness before writing to brightness register, so when users write minimum brightness (1), it sets lm3601x output the minimum.[...]
Applied, thanks!
[1/1] leds: lm3601x: Calculate max_brightness and brightness properly
commit: ef23c7b35efb9cfa0b56fbb7fdf3aa782b1c2b87
--
Lee Jones [李琼斯]