Skip to contentSkip to conversation

net: ks8851: Fix deadlock with the SPI chip variant

PATCH Superseded Ronald Wahl 4 participants 5 messages Jul 4, 2024 – Jul 6, 2024

Subsystems (3)

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 net: ks8851: Fix deadlock with the SPI chip variant

From: Ronald Wahl <[email protected]>

When SMP is enabled and spinlocks are actually functional then there is a deadlock with the 'statelock' spinlock between ks8851_start_xmit_spi and ks8851_irq:

    watchdog: BUG: soft lockup - CPU#0 stuck for 27s!
    call trace:
      queued_spin_lock_slowpath+0x100/0x284
      do_raw_spin_lock+0x34/0x44
      ks8851_start_xmit_spi+0x30/0xb8
      ks8851_start_xmit+0x14/0x20
      netdev_start_xmit+0x40/0x6c
      dev_hard_start_xmit+0x6c/0xbc
      sch_direct_xmit+0xa4/0x22c
      __qdisc_run+0x138/0x3fc
      qdisc_run+0x24/0x3c
      net_tx_action+0xf8/0x130
      handle_softirqs+0x1ac/0x1f0
      __do_softirq+0x14/0x20
      ____do_softirq+0x10/0x1c
      call_on_irq_stack+0x3c/0x58
      do_softirq_own_stack+0x1c/0x28
      __irq_exit_rcu+0x54/0x9c
      irq_exit_rcu+0x10/0x1c
      el1_interrupt+0x38/0x50
      el1h_64_irq_handler+0x18/0x24
      el1h_64_irq+0x64/0x68
      __netif_schedule+0x6c/0x80
      netif_tx_wake_queue+0x38/0x48
      ks8851_irq+0xb8/0x2c8
      irq_thread_fn+0x2c/0x74
      irq_thread+0x10c/0x1b0
      kthread+0xc8/0xd8
      ret_from_fork+0x10/0x20

This issue has not been identified earlier because tests were done on a device with SMP disabled and so spinlocks were actually NOPs.

Now use spin_(un)lock_bh for TX queue related locking to avoid execution of softirq work synchronously that would lead to a deadlock.

Fixes 3dc5d4454545 ("net: ks8851: Fix TX stall caused by TX buffer overrun")
Cc "David S. Miller" <[email protected]>
Cc Eric Dumazet <[email protected]>
Cc Jakub Kicinski <[email protected]>
Cc Paolo Abeni <[email protected]>
Cc Simon Horman <[email protected]>

---
V2: - use spin_lock_bh instead of moving netif_wake_queue outside of
locked region (doing the same in the start_xmit function)
- add missing net: tag

 drivers/net/ethernet/micrel/ks8851_common.c | 4 ++--
 drivers/net/ethernet/micrel/ks8851_spi.c    | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)
drivers/net/ethernet/micrel/ks8851_common.c +2 -2
index 6453c92f0fa7..51fb6c27153e 100644
@@ -352,11 +352,11 @@ static irqreturn_t ks8851_irq(int irq, void *_ks)
 		netif_dbg(ks, intr, ks->netdev,
 			  "%s: txspace %d\n", __func__, tx_space);
 
-		spin_lock(&ks->statelock);
+		spin_lock_bh(&ks->statelock);
 		ks->tx_space = tx_space;
 		if (netif_queue_stopped(ks->netdev))
 			netif_wake_queue(ks->netdev);
-		spin_unlock(&ks->statelock);
+		spin_unlock_bh(&ks->statelock);
 	}
 
 	if (status & IRQ_SPIBEI) {
drivers/net/ethernet/micrel/ks8851_spi.c +2 -2
index 670c1de966db..818e1ce3227b 100644
@@ -385,7 +385,7 @@ static netdev_tx_t ks8851_start_xmit_spi(struct sk_buff *skb,
 	netif_dbg(ks, tx_queued, ks->netdev,
 		  "%s: skb %p, %d@%p\n", __func__, skb, skb->len, skb->data);
 
-	spin_lock(&ks->statelock);
+	spin_lock_bh(&ks->statelock);
 
 	if (ks->queued_len + needed > ks->tx_space) {
 		netif_stop_queue(dev);
@@ -395,7 +395,7 @@ static netdev_tx_t ks8851_start_xmit_spi(struct sk_buff *skb,
 		skb_queue_tail(&ks->txq, skb);
 	}
 
-	spin_unlock(&ks->statelock);
+	spin_unlock_bh(&ks->statelock);
 	if (ret == NETDEV_TX_OK)
 		schedule_work(&kss->tx_work);
 

--
2.45.2

maintainer
#1 lore raw
Quoted 12 lines · On Thu, 4 Jul 2024 19:47:56 +0200 Ronald Wahl wrote:
drivers/net/ethernet/micrel/ks8851_spi.c +1 -1
@@ -385,7 +385,7 @@ static netdev_tx_t ks8851_start_xmit_spi(struct sk_buff *skb,
 	netif_dbg(ks, tx_queued, ks->netdev,
 		  "%s: skb %p, %d@%p\n", __func__, skb, skb->len, skb->data);
 
-	spin_lock(&ks->statelock);
+	spin_lock_bh(&ks->statelock);
 
 	if (ks->queued_len + needed > ks->tx_space) {
 		netif_stop_queue(dev);

drivers/net/ethernet/micrel/ks8851_spi.c static netdev_tx_t ks8851_start_xmit_spi(struct sk_buff *skb, · line 398

Quoted 5 lines
drivers/net/ethernet/micrel/ks8851_spi.c +1 -1
@@ -395,7 +395,7 @@ static netdev_tx_t ks8851_start_xmit_spi(struct sk_buff *skb,
 		skb_queue_tail(&ks->txq, skb);
 	}
 
-	spin_unlock(&ks->statelock);
+	spin_unlock_bh(&ks->statelock);

this one probably can stay as spin_lock() since networking stack only calls xmit in BH context. But I see 2 other spin_lock(statelock) in the driver which I'm not as sure about. Any taking of this lock has to be _bh() unless you're sure the caller is already in BH.

#2 lore raw
Quoted 16 lines · Jakub Kicinski
Quoted 15 lines · On Thu, 4 Jul 2024 19:47:56 +0200 Ronald Wahl wrote:
drivers/net/ethernet/micrel/ks8851_spi.c +1 -1
@@ -385,7 +385,7 @@ static netdev_tx_t ks8851_start_xmit_spi(struct sk_buff *skb,
     netif_dbg(ks, tx_queued, ks->netdev,
               "%s: skb %p, %d@%p\n", __func__, skb, skb->len, skb->data);
 
-    spin_lock(&ks->statelock);
+    spin_lock_bh(&ks->statelock);
 
     if (ks->queued_len + needed > ks->tx_space) {
             netif_stop_queue(dev);
@@ -395,7 +395,7 @@ static netdev_tx_t ks8851_start_xmit_spi(struct sk_buff *skb,
             skb_queue_tail(&ks->txq, skb);
     }
 
Quoted 5 lines

drivers/net/ethernet/micrel/ks8851_spi.c static netdev_tx_t ks8851_start_xmit_spi(struct sk_buff *skb, · line 398

Quoted 2 lines
drivers/net/ethernet/micrel/ks8851_spi.c +1 -1
-    spin_unlock(&ks->statelock);
+    spin_unlock_bh(&ks->statelock);

this one probably can stay as spin_lock() since networking stack only calls xmit in BH context.

I already suspected this it was more a mental hint here. I will remove it.

Quoted 3 lines

But I see 2 other spin_lock(statelock) in the
driver which I'm not as sure about. Any taking of this lock has to be _bh() unless you're sure the caller is already in BH.

The other two instances are not in BH context as far as I know but also do not interfere with BH. The one in ks8861_tx_work protects only variable assignments used only inside the driver and the one in ks8851_set_rx_mode also only does some driver local variable stuff and a schedule_work which as far as I know has nothing to do with BH because workqueues are running in process context. Am I wrong here?

- ron

________________________________

Ce message, ainsi que tous les fichiers joints à ce message, peuvent contenir des informations sensibles et/ ou confidentielles ne devant pas être divulguées. Si vous n'êtes pas le destinataire de ce message (ou que vous recevez ce message par erreur), nous vous remercions de le notifier immédiatement à son expéditeur, et de détruire ce message. Toute copie, divulgation, modification, utilisation ou diffusion, non autorisée, directe ou indirecte, de tout ou partie de ce message, est strictement interdite.

This e-mail, and any document attached hereby, may contain confidential and/or privileged information. If you are not the intended recipient (or have received this e-mail in error) please notify the sender immediately and destroy this e-mail. Any unauthorized, direct or indirect, copying, disclosure, distribution or other use of the material or parts thereof is strictly forbidden.

#3 lore raw
Quoted 31 lines · Ronald Wahl
Quoted 18 lines · Jakub Kicinski
Quoted 17 lines · On Thu, 4 Jul 2024 19:47:56 +0200 Ronald Wahl wrote:
drivers/net/ethernet/micrel/ks8851_spi.c +1 -1
@@ -385,7 +385,7 @@ static netdev_tx_t ks8851_start_xmit_spi(struct
 sk_buff *skb,
      netif_dbg(ks, tx_queued, ks->netdev,
            "%s: skb %p, %d@%p\n", __func__, skb, skb->len, skb->data);
 
-    spin_lock(&ks->statelock);
+    spin_lock_bh(&ks->statelock);
 
      if (ks->queued_len + needed > ks->tx_space) {
          netif_stop_queue(dev);
drivers/net/ethernet/micrel/ks8851_spi.c +0 -0
@@ -395,7 +395,7 @@ static netdev_tx_t ks8851_start_xmit_spi(struct
 sk_buff *skb,
          skb_queue_tail(&ks->txq, skb);
      }
 
Quoted 5 lines

drivers/net/ethernet/micrel/ks8851_spi.c static netdev_tx_t ks8851_start_xmit_spi(struct · line 399

Quoted 2 lines
drivers/net/ethernet/micrel/ks8851_spi.c +1 -1
-    spin_unlock(&ks->statelock);
+    spin_unlock_bh(&ks->statelock);

this one probably can stay as spin_lock() since networking stack only calls xmit in BH context.

I already suspected this it was more a mental hint here. I will remove it.

Quoted 3 lines

But I see 2 other spin_lock(statelock) in the
driver which I'm not as sure about. Any taking of this lock has to be _bh() unless you're sure the caller is already in BH.

Quoted 6 lines

The other two instances are not in BH context as far as I know but also do not interfere with BH. The one in ks8861_tx_work protects only variable assignments used only inside the driver and the one in ks8851_set_rx_mode also only does some driver local variable stuff and a schedule_work which as far as I know has nothing to do with BH because workqueues are running in process context. Am I wrong here?

I guess I found a misunderstanding on my side: I was assuming that a softirq cannot asynchronously interrupt a spin lock protected section. Maybe this is wrong. In the one place where I'm waking the queue again the spin_lock_bh avoids synchronously triggering the BH processing while still holding a spinlock.

I will use the _bh variants on the two other places.
- ron

________________________________

Ce message, ainsi que tous les fichiers joints à ce message, peuvent contenir des informations sensibles et/ ou confidentielles ne devant pas être divulguées. Si vous n'êtes pas le destinataire de ce message (ou que vous recevez ce message par erreur), nous vous remercions de le notifier immédiatement à son expéditeur, et de détruire ce message. Toute copie, divulgation, modification, utilisation ou diffusion, non autorisée, directe ou indirecte, de tout ou partie de ce message, est strictement interdite.

This e-mail, and any document attached hereby, may contain confidential and/or privileged information. If you are not the intended recipient (or have received this e-mail in error) please notify the sender immediately and destroy this e-mail. Any unauthorized, direct or indirect, copying, disclosure, distribution or other use of the material or parts thereof is strictly forbidden.

maintainer
#4 lore raw
Quoted 2 lines · Ronald Wahl

This e-mail, and any document attached hereby, may contain confidential and/or privileged information. If you are not the intended recipient (or have received this e-mail in error) please notify the sender immediately and destroy this e-mail. Any unauthorized, direct or indirect, copying, disclosure, distribution or other use of the material or parts thereof is strictly forbidden.

Now deleted