ARM: dts: qcom: msm8960: correct memory base
PATCH 1/1 ARM: dts: qcom: msm8960: correct memory base
DeviceTree validation requires a unit address on the memory node, adjust the base to match [Ref] and use this as unit address.
The bootloader will update the information with the actual values during boot.
Ref: https://github.com/msm8916-mainline/lk2nd/blob/main/target/msm8960/rules.mk
Reviewed-by Dmitry Baryshkov <[email protected]>
Signed-off-by David Heidelberg <[email protected]>
--- arch/arm/boot/dts/qcom/qcom-msm8960.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm/boot/dts/qcom/qcom-msm8960.dtsi +2 -2
@@ -47,9 +47,9 @@ L2: l2-cache { }; }; - memory { + memory@80000000 { device_type = "memory"; - reg = <0x0 0x0>; + reg = <0x80000000 0>; }; cpu-pmu {
Signature · 1 line
2.45.2
Quoted 9 lines · David Heidelberg
DeviceTree validation requires a unit address on the memory node, adjust the base to match [Ref] and use this as unit address.
The bootloader will update the information with the actual values during boot.
Ref: https://github.com/msm8916-mainline/lk2nd/blob/main/target/msm8960/rules.mk
[...]
Applied, thanks!
[1/1] ARM: dts: qcom: msm8960: correct memory base
commit: c1842643a3df6004d1bc9df74e34d8b72997d886
Best regards,
Signature · 1 line
Bjorn Andersson <[email protected]>