Skip to contentSkip to conversation

Input: elantech - fix touchpad state on resume for Lenovo N24

PATCH New Sasha Levin 1 participant 17 messages Jul 9, 2024

Subsystems (10)
lore
Share & tools
lore

Sasha Levin

author maintainer
#0 lore raw

PATCH 1/17 Input: elantech - fix touchpad state on resume for Lenovo N24

From: Jonathan Denose <[email protected]>

[ Upstream commit a69ce592cbe0417664bc5a075205aa75c2ec1273 ]

The Lenovo N24 on resume becomes stuck in a state where it sends incorrect packets, causing elantech_packet_check_v4 to fail. The only way for the device to resume sending the correct packets is for it to be disabled and then re-enabled.

This change adds a dmi check to trigger this behavior on resume.

---
 drivers/input/mouse/elantech.c | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)
drivers/input/mouse/elantech.c +31 -0
index 4e38229404b4b..b4723ea395eb9 100644
@@ -1476,16 +1476,47 @@ static void elantech_disconnect(struct psmouse *psmouse)
 	psmouse->private = NULL;
 }
 
+/*
+ * Some hw_version 4 models fail to properly activate absolute mode on
+ * resume without going through disable/enable cycle.
+ */
+static const struct dmi_system_id elantech_needs_reenable[] = {
+#if defined(CONFIG_DMI) && defined(CONFIG_X86)
+	{
+		/* Lenovo N24 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "81AF"),
+		},
+	},
+#endif
+	{ }
+};
+
 /*
  * Put the touchpad back into absolute mode when reconnecting
  */
 static int elantech_reconnect(struct psmouse *psmouse)
 {
+	int err;
+
 	psmouse_reset(psmouse);
 
 	if (elantech_detect(psmouse, 0))
 		return -1;
 
+	if (dmi_check_system(elantech_needs_reenable)) {
+		err = ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_DISABLE);
+		if (err)
+			psmouse_warn(psmouse, "failed to deactivate mouse on %s: %d\n",
+				     psmouse->ps2dev.serio->phys, err);
+
+		err = ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_ENABLE);
+		if (err)
+			psmouse_warn(psmouse, "failed to reactivate mouse on %s: %d\n",
+				     psmouse->ps2dev.serio->phys, err);
+	}
+
 	if (elantech_set_absolute_mode(psmouse)) {
 		psmouse_err(psmouse,
 			    "failed to put touchpad back into absolute mode.\n");
Signature · 1 line
2.43.0
author maintainer
#1 lore raw

PATCH 2/17 Input: i8042 - add Ayaneo Kun to i8042 quirk table

From: Tobias Jakobi <[email protected]>

[ Upstream commit 955af6355ddfe35140f9706a635838212a32513b ]

See the added comment for details. Also fix a typo in the quirk's define.

---
 drivers/input/serio/i8042-acpipnpio.h | 18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)
drivers/input/serio/i8042-acpipnpio.h +16 -2
index d4792950bcffd..49d87f56cb909 100644
@@ -75,7 +75,7 @@ static inline void i8042_write_command(int val)
 #define SERIO_QUIRK_PROBE_DEFER		BIT(5)
 #define SERIO_QUIRK_RESET_ALWAYS	BIT(6)
 #define SERIO_QUIRK_RESET_NEVER		BIT(7)
-#define SERIO_QUIRK_DIECT		BIT(8)
+#define SERIO_QUIRK_DIRECT		BIT(8)
 #define SERIO_QUIRK_DUMBKBD		BIT(9)
 #define SERIO_QUIRK_NOLOOP		BIT(10)
 #define SERIO_QUIRK_NOTIMEOUT		BIT(11)
@@ -1295,6 +1295,20 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = {
 		.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
 					SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
 	},
+	{
+		/*
+		 * The Ayaneo Kun is a handheld device where some the buttons
+		 * are handled by an AT keyboard. The keyboard is usually
+		 * detected as raw, but sometimes, usually after a cold boot,
+		 * it is detected as translated. Make sure that the keyboard
+		 * is always in raw mode.
+		 */
+		.matches = {
+			DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "AYANEO"),
+			DMI_MATCH(DMI_BOARD_NAME, "KUN"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_DIRECT)
+	},
 	{ }
 };
 
@@ -1613,7 +1627,7 @@ static void __init i8042_check_quirks(void)
 		if (quirks & SERIO_QUIRK_RESET_NEVER)
 			i8042_reset = I8042_RESET_NEVER;
 	}
-	if (quirks & SERIO_QUIRK_DIECT)
+	if (quirks & SERIO_QUIRK_DIRECT)
 		i8042_direct = true;
 	if (quirks & SERIO_QUIRK_DUMBKBD)
 		i8042_dumbkbd = true;
Signature · 1 line
2.43.0
author maintainer
#2 lore raw

PATCH 3/17 bytcr_rt5640 : inverse jack detect for Archos 101 cesium

In reply to Sasha Levin

From: Thomas GENTY <[email protected]>

[ Upstream commit e3209a1827646daaab744aa6a5767b1f57fb5385 ]

When headphones are plugged in, they appear absent; when they are removed, they appear present.
Add a specific entry in bytcr_rt5640 for this device

---
 sound/soc/intel/boards/bytcr_rt5640.c | 11 +++++++++++
 1 file changed, 11 insertions(+)
sound/soc/intel/boards/bytcr_rt5640.c +11 -0
index 434679afa7e1a..3d2a0e8cad9a5 100644
@@ -607,6 +607,17 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
 					BYT_RT5640_SSP0_AIF1 |
 					BYT_RT5640_MCLK_EN),
 	},
+	{
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ARCHOS"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "ARCHOS 101 CESIUM"),
+		},
+		.driver_data = (void *)(BYTCR_INPUT_DEFAULTS |
+					BYT_RT5640_JD_NOT_INV |
+					BYT_RT5640_DIFF_MIC |
+					BYT_RT5640_SSP0_AIF1 |
+					BYT_RT5640_MCLK_EN),
+	},
 	{
 		.matches = {
 			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ARCHOS"),
Signature · 1 line
2.43.0
author maintainer
#3 lore raw

PATCH 4/17 ALSA: dmaengine: Synchronize dma channel after drop()

In reply to Sasha Levin

From: Jai Luthra <[email protected]>

[ Upstream commit e8343410ddf08fc36a9b9cc7c51a4e53a262d4c6 ]

Sometimes the stream may be stopped due to XRUN events, in which case the userspace can call snd_pcm_drop() and snd_pcm_prepare() to stop and start the stream again.

In these cases, we must wait for the DMA channel to synchronize before marking the stream as prepared for playback, as the DMA channel gets stopped by drop() without any synchronization. Make sure the ALSA core synchronizes the DMA channel by adding a sync_stop() hook.

---
 include/sound/dmaengine_pcm.h         |  1 +
 sound/core/pcm_dmaengine.c            | 10 ++++++++++
 sound/soc/soc-generic-dmaengine-pcm.c |  8 ++++++++
 3 files changed, 19 insertions(+)
include/sound/dmaengine_pcm.h +1 -0
index 96666efddb396..6d9c94a570733 100644
@@ -34,6 +34,7 @@ snd_pcm_uframes_t snd_dmaengine_pcm_pointer_no_residue(struct snd_pcm_substream
 int snd_dmaengine_pcm_open(struct snd_pcm_substream *substream,
 	struct dma_chan *chan);
 int snd_dmaengine_pcm_close(struct snd_pcm_substream *substream);
+int snd_dmaengine_pcm_sync_stop(struct snd_pcm_substream *substream);
 
 int snd_dmaengine_pcm_open_request_chan(struct snd_pcm_substream *substream,
 	dma_filter_fn filter_fn, void *filter_data);
sound/core/pcm_dmaengine.c +10 -0
index 0fe93b423c4ed..3e479dca122a0 100644
@@ -344,6 +344,16 @@ int snd_dmaengine_pcm_open_request_chan(struct snd_pcm_substream *substream,
 }
 EXPORT_SYMBOL_GPL(snd_dmaengine_pcm_open_request_chan);
 
+int snd_dmaengine_pcm_sync_stop(struct snd_pcm_substream *substream)
+{
+	struct dmaengine_pcm_runtime_data *prtd = substream_to_prtd(substream);
+
+	dmaengine_synchronize(prtd->dma_chan);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(snd_dmaengine_pcm_sync_stop);
+
 /**
  * snd_dmaengine_pcm_close - Close a dmaengine based PCM substream
  * @substream: PCM substream
sound/soc/soc-generic-dmaengine-pcm.c +8 -0
index 4aa48c74f21a0..fa1f91c34834f 100644
@@ -323,6 +323,12 @@ static int dmaengine_copy_user(struct snd_soc_component *component,
 	return 0;
 }
 
+static int dmaengine_pcm_sync_stop(struct snd_soc_component *component,
+				   struct snd_pcm_substream *substream)
+{
+	return snd_dmaengine_pcm_sync_stop(substream);
+}
+
 static const struct snd_soc_component_driver dmaengine_pcm_component = {
 	.name		= SND_DMAENGINE_PCM_DRV_NAME,
 	.probe_order	= SND_SOC_COMP_ORDER_LATE,
@@ -332,6 +338,7 @@ static const struct snd_soc_component_driver dmaengine_pcm_component = {
 	.trigger	= dmaengine_pcm_trigger,
 	.pointer	= dmaengine_pcm_pointer,
 	.pcm_construct	= dmaengine_pcm_new,
+	.sync_stop	= dmaengine_pcm_sync_stop,
 };
 
 static const struct snd_soc_component_driver dmaengine_pcm_component_process = {
@@ -344,6 +351,7 @@ static const struct snd_soc_component_driver dmaengine_pcm_component_process = {
 	.pointer	= dmaengine_pcm_pointer,
 	.copy_user	= dmaengine_copy_user,
 	.pcm_construct	= dmaengine_pcm_new,
+	.sync_stop	= dmaengine_pcm_sync_stop,
 };
 
 static const char * const dmaengine_pcm_dma_channel_names[] = {
Signature · 1 line
2.43.0
author maintainer
#4 lore raw

PATCH 5/17 ASoC: ti: davinci-mcasp: Set min period size using FIFO config

In reply to Sasha Levin

From: Jai Luthra <[email protected]>

[ Upstream commit c5dcf8ab10606e76c1d8a0ec77f27d84a392e874 ]

The minimum period size was enforced to 64 as older devices integrating McASP with EDMA used an internal FIFO of 64 samples.

With UDMA based platforms this internal McASP FIFO is optional, as the DMA engine internally does some buffering which is already accounted for when registering the platform. So we should read the actual FIFO configuration (txnumevt/rxnumevt) instead of hardcoding frames.min to 64.

---
 sound/soc/ti/davinci-mcasp.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)
sound/soc/ti/davinci-mcasp.c +7 -2
index 5b82329f44401..dbd30604816e5 100644
@@ -1472,10 +1472,11 @@ static int davinci_mcasp_hw_rule_min_periodsize(
 {
 	struct snd_interval *period_size = hw_param_interval(params,
 						SNDRV_PCM_HW_PARAM_PERIOD_SIZE);
+	u8 numevt = *((u8 *)rule->private);
 	struct snd_interval frames;
 
 	snd_interval_any(&frames);
-	frames.min = 64;
+	frames.min = numevt;
 	frames.integer = 1;
 
 	return snd_interval_refine(period_size, &frames);
@@ -1490,6 +1491,7 @@ static int davinci_mcasp_startup(struct snd_pcm_substream *substream,
 	u32 max_channels = 0;
 	int i, dir, ret;
 	int tdm_slots = mcasp->tdm_slots;
+	u8 *numevt;
 
 	/* Do not allow more then one stream per direction */
 	if (mcasp->substreams[substream->stream])
@@ -1589,9 +1591,12 @@ static int davinci_mcasp_startup(struct snd_pcm_substream *substream,
 			return ret;
 	}
 
+	numevt = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ?
+			 &mcasp->txnumevt :
+			 &mcasp->rxnumevt;
 	snd_pcm_hw_rule_add(substream->runtime, 0,
 			    SNDRV_PCM_HW_PARAM_PERIOD_SIZE,
-			    davinci_mcasp_hw_rule_min_periodsize, NULL,
+			    davinci_mcasp_hw_rule_min_periodsize, numevt,
 			    SNDRV_PCM_HW_PARAM_PERIOD_SIZE, -1);
 
 	return 0;
Signature · 1 line
2.43.0
author maintainer
#5 lore raw

PATCH 6/17 ASoC: ti: omap-hdmi: Fix too long driver name

In reply to Sasha Levin

From: Primoz Fiser <[email protected]>

[ Upstream commit 524d3f126362b6033e92cbe107ae2158d7fbff94 ]

Set driver name to "HDMI". This simplifies the code and gets rid of the following error messages:

ASoC: driver name too long 'HDMI 58040000.encoder' -> 'HDMI_58040000_e'

---
 sound/soc/ti/omap-hdmi.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)
sound/soc/ti/omap-hdmi.c +1 -5
index 3328c02f93c74..1dfe439d13417 100644
@@ -353,11 +353,7 @@ static int omap_hdmi_audio_probe(struct platform_device *pdev)
 	if (!card)
 		return -ENOMEM;
 
-	card->name = devm_kasprintf(dev, GFP_KERNEL,
-				    "HDMI %s", dev_name(ad->dssdev));
-	if (!card->name)
-		return -ENOMEM;
-
+	card->name = "HDMI";
 	card->owner = THIS_MODULE;
 	card->dai_link =
 		devm_kzalloc(dev, sizeof(*(card->dai_link)), GFP_KERNEL);
Signature · 1 line
2.43.0
author maintainer
#6 lore raw

PATCH 7/17 can: kvaser_usb: fix return value for hif_usb_send_regout

In reply to Sasha Levin

From: Chen Ni <[email protected]>

[ Upstream commit 0d34d8163fd87978a6abd792e2d8ad849f4c3d57 ]

As the potential failure of usb_submit_urb(), it should be better to return the err variable to catch the error.

---
 drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c +1 -1
index 09dbc51347d70..41594cac54966 100644
@@ -292,7 +292,7 @@ int kvaser_usb_send_cmd_async(struct kvaser_usb_net_priv *priv, void *cmd,
 	}
 	usb_free_urb(urb);
 
-	return 0;
+	return err;
 }
 
 int kvaser_usb_can_rx_over_error(struct net_device *netdev)
Signature · 1 line
2.43.0
author maintainer
#7 lore raw

PATCH 8/17 s390/sclp: Fix sclp_init() cleanup on failure

In reply to Sasha Levin

From: Heiko Carstens <[email protected]>

[ Upstream commit 6434b33faaa063df500af355ee6c3942e0f8d982 ]

If sclp_init() fails it only partially cleans up: if there are multiple failing calls to sclp_init() sclp_state_change_event will be added several times to sclp_reg_list, which results in the following warning:

------------[ cut here ]------------
list_add double add: new=000003ffe1598c10, prev=000003ffe1598bf0, next=000003ffe1598c10.
WARNING: CPU: 0 PID: 1 at lib/list_debug.c:35 __list_add_valid_or_report+0xde/0xf8
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.10.0-rc3
Krnl PSW : 0404c00180000000 000003ffe0d6076a (__list_add_valid_or_report+0xe2/0xf8)
           R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 RI:0 EA:3
...
Call Trace:
 [<000003ffe0d6076a>] __list_add_valid_or_report+0xe2/0xf8
([<000003ffe0d60766>] __list_add_valid_or_report+0xde/0xf8)
 [<000003ffe0a8d37e>] sclp_init+0x40e/0x450
 [<000003ffe00009f2>] do_one_initcall+0x42/0x1e0
 [<000003ffe15b77a6>] do_initcalls+0x126/0x150
 [<000003ffe15b7a0a>] kernel_init_freeable+0x1ba/0x1f8
 [<000003ffe0d6650e>] kernel_init+0x2e/0x180
 [<000003ffe000301c>] __ret_from_fork+0x3c/0x60
 [<000003ffe0d759ca>] ret_from_fork+0xa/0x30

Fix this by removing sclp_state_change_event from sclp_reg_list when sclp_init() fails.

---
 drivers/s390/char/sclp.c | 1 +
 1 file changed, 1 insertion(+)
drivers/s390/char/sclp.c +1 -0
index 2cf7fe131ecec..0830ea42e7c80 100644
@@ -1292,6 +1292,7 @@ sclp_init(void)
 fail_unregister_reboot_notifier:
 	unregister_reboot_notifier(&sclp_reboot_notifier);
 fail_init_state_uninitialized:
+	list_del(&sclp_state_change_event.list);
 	sclp_init_state = sclp_init_state_uninitialized;
 	free_page((unsigned long) sclp_read_sccb);
 	free_page((unsigned long) sclp_init_sccb);
Signature · 1 line
2.43.0
author maintainer
#8 lore raw

PATCH 9/17 platform/x86: wireless-hotkey: Add support for LG Airplane Button

In reply to Sasha Levin

From: Armin Wolf <[email protected]>

[ Upstream commit 151e78a0b89ee6dec93382dbdf5b1ef83f9c4716 ]

The LGEX0815 ACPI device is used by the "LG Airplane Mode Button" Windows driver for handling rfkill requests. When the ACPI device receives an 0x80 ACPI notification, an rfkill event is to be send to userspace.

Add support for the LGEX0815 ACPI device to the driver.

---
 drivers/platform/x86/wireless-hotkey.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/platform/x86/wireless-hotkey.c +2 -0
index 11c60a2734468..61ae722643e5a 100644
@@ -19,6 +19,7 @@ MODULE_AUTHOR("Alex Hung");
 MODULE_ALIAS("acpi*:HPQ6001:*");
 MODULE_ALIAS("acpi*:WSTADEF:*");
 MODULE_ALIAS("acpi*:AMDI0051:*");
+MODULE_ALIAS("acpi*:LGEX0815:*");
 
 static struct input_dev *wl_input_dev;
 
@@ -26,6 +27,7 @@ static const struct acpi_device_id wl_ids[] = {
 	{"HPQ6001", 0},
 	{"WSTADEF", 0},
 	{"AMDI0051", 0},
+	{"LGEX0815", 0},
 	{"", 0},
 };
 
Signature · 1 line
2.43.0
author maintainer
#9 lore raw

PATCH 10/17 platform/x86: lg-laptop: Remove LGEX0815 hotkey handling

In reply to Sasha Levin

From: Armin Wolf <[email protected]>

[ Upstream commit 413c204595ca98a4f33414a948c18d7314087342 ]

The rfkill hotkey handling is already provided by the wireless-hotkey driver. Remove the now unnecessary rfkill hotkey handling to avoid duplicating functionality.

The ACPI notify handler still prints debugging information when receiving ACPI notifications to aid in reverse-engineering.

---
 drivers/platform/x86/lg-laptop.c | 8 --------
 1 file changed, 8 deletions(-)
drivers/platform/x86/lg-laptop.c +0 -8
index 88b551caeaaf4..96960f96f775c 100644
@@ -83,7 +83,6 @@ static const struct key_entry wmi_keymap[] = {
 					  * this key both sends an event and
 					  * changes backlight level.
 					  */
-	{KE_KEY, 0x80, {KEY_RFKILL} },
 	{KE_END, 0}
 };
 
@@ -271,14 +270,7 @@ static void wmi_input_setup(void)
 
 static void acpi_notify(struct acpi_device *device, u32 event)
 {
-	struct key_entry *key;
-
 	acpi_handle_debug(device->handle, "notify: %d\n", event);
-	if (inited & INIT_SPARSE_KEYMAP) {
-		key = sparse_keymap_entry_from_scancode(wmi_input_dev, 0x80);
-		if (key && key->type == KE_KEY)
-			sparse_keymap_report_entry(wmi_input_dev, key, 1, true);
-	}
 }
 
 static ssize_t fan_mode_store(struct device *dev,
Signature · 1 line
2.43.0
author maintainer
#10 lore raw

PATCH 11/17 platform/x86: lg-laptop: Change ACPI device id

In reply to Sasha Levin

From: Armin Wolf <[email protected]>

[ Upstream commit 58a54f27a0dac81f7fd3514be01012635219a53c ]

The LGEX0815 ACPI device id is used for handling hotkey events, but this functionality is already handled by the wireless-hotkey driver.

The LGEX0820 ACPI device id however is used to manage various platform features using the WMAB/WMBB ACPI methods. Use this ACPI device id to avoid blocking the wireless-hotkey driver from probing.

---
 drivers/platform/x86/lg-laptop.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/platform/x86/lg-laptop.c +1 -1
index 96960f96f775c..807bd4283b979 100644
@@ -718,7 +718,7 @@ static int acpi_remove(struct acpi_device *device)
 }
 
 static const struct acpi_device_id device_ids[] = {
-	{"LGEX0815", 0},
+	{"LGEX0820", 0},
 	{"", 0}
 };
 MODULE_DEVICE_TABLE(acpi, device_ids);
Signature · 1 line
2.43.0
author maintainer
#11 lore raw

PATCH 12/17 platform/x86: lg-laptop: Use ACPI device handle when evaluating WMAB/WMBB

In reply to Sasha Levin

From: Armin Wolf <[email protected]>

[ Upstream commit b27ea279556121b54d3f45d0529706cf100cdb3a ]

On the LG Gram 16Z90S, the WMAB and WMBB ACPI methods are not mapped under \XINI, but instead are mapped under \_SB.XINI.

The reason for this is that the LGEX0820 ACPI device used by this driver is mapped at \_SB.XINI, so the ACPI methods where moved as well to appear below the LGEX0820 ACPI device.

Fix this by using the ACPI handle from the ACPI device when evaluating both methods.

---
 drivers/platform/x86/lg-laptop.c | 79 +++++++++++++-------------------
 1 file changed, 33 insertions(+), 46 deletions(-)
drivers/platform/x86/lg-laptop.c +33 -46
index 807bd4283b979..5f9fbea8fc3c2 100644
@@ -37,8 +37,6 @@ MODULE_LICENSE("GPL");
 #define WMI_METHOD_WMBB "2B4F501A-BD3C-4394-8DCF-00A7D2BC8210"
 #define WMI_EVENT_GUID  WMI_EVENT_GUID0
 
-#define WMAB_METHOD     "\\XINI.WMAB"
-#define WMBB_METHOD     "\\XINI.WMBB"
 #define SB_GGOV_METHOD  "\\_SB.GGOV"
 #define GOV_TLED        0x2020008
 #define WM_GET          1
@@ -73,7 +71,7 @@ static u32 inited;
 
 static int battery_limit_use_wmbb;
 static struct led_classdev kbd_backlight;
-static enum led_brightness get_kbd_backlight_level(void);
+static enum led_brightness get_kbd_backlight_level(struct device *dev);
 
 static const struct key_entry wmi_keymap[] = {
 	{KE_KEY, 0x70, {KEY_F15} },	 /* LG control panel (F1) */
@@ -126,11 +124,10 @@ static int ggov(u32 arg0)
 	return res;
 }
 
-static union acpi_object *lg_wmab(u32 method, u32 arg1, u32 arg2)
+static union acpi_object *lg_wmab(struct device *dev, u32 method, u32 arg1, u32 arg2)
 {
 	union acpi_object args[3];
 	acpi_status status;
-	acpi_handle handle;
 	struct acpi_object_list arg;
 	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
 
@@ -141,29 +138,22 @@ static union acpi_object *lg_wmab(u32 method, u32 arg1, u32 arg2)
 	args[2].type = ACPI_TYPE_INTEGER;
 	args[2].integer.value = arg2;
 
-	status = acpi_get_handle(NULL, (acpi_string) WMAB_METHOD, &handle);
-	if (ACPI_FAILURE(status)) {
-		pr_err("Cannot get handle");
-		return NULL;
-	}
-
 	arg.count = 3;
 	arg.pointer = args;
 
-	status = acpi_evaluate_object(handle, NULL, &arg, &buffer);
+	status = acpi_evaluate_object(ACPI_HANDLE(dev), "WMAB", &arg, &buffer);
 	if (ACPI_FAILURE(status)) {
-		acpi_handle_err(handle, "WMAB: call failed.\n");
+		dev_err(dev, "WMAB: call failed.\n");
 		return NULL;
 	}
 
 	return buffer.pointer;
 }
 
-static union acpi_object *lg_wmbb(u32 method_id, u32 arg1, u32 arg2)
+static union acpi_object *lg_wmbb(struct device *dev, u32 method_id, u32 arg1, u32 arg2)
 {
 	union acpi_object args[3];
 	acpi_status status;
-	acpi_handle handle;
 	struct acpi_object_list arg;
 	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
 	u8 buf[32];
@@ -179,18 +169,12 @@ static union acpi_object *lg_wmbb(u32 method_id, u32 arg1, u32 arg2)
 	args[2].buffer.length = 32;
 	args[2].buffer.pointer = buf;
 
-	status = acpi_get_handle(NULL, (acpi_string)WMBB_METHOD, &handle);
-	if (ACPI_FAILURE(status)) {
-		pr_err("Cannot get handle");
-		return NULL;
-	}
-
 	arg.count = 3;
 	arg.pointer = args;
 
-	status = acpi_evaluate_object(handle, NULL, &arg, &buffer);
+	status = acpi_evaluate_object(ACPI_HANDLE(dev), "WMBB", &arg, &buffer);
 	if (ACPI_FAILURE(status)) {
-		acpi_handle_err(handle, "WMAB: call failed.\n");
+		dev_err(dev, "WMBB: call failed.\n");
 		return NULL;
 	}
 
@@ -221,7 +205,7 @@ static void wmi_notify(u32 value, void *context)
 
 		if (eventcode == 0x10000000) {
 			led_classdev_notify_brightness_hw_changed(
-				&kbd_backlight, get_kbd_backlight_level());
+				&kbd_backlight, get_kbd_backlight_level(kbd_backlight.dev->parent));
 		} else {
 			key = sparse_keymap_entry_from_scancode(
 				wmi_input_dev, eventcode);
@@ -286,7 +270,7 @@ static ssize_t fan_mode_store(struct device *dev,
 	if (ret)
 		return ret;
 
-	r = lg_wmab(WM_FAN_MODE, WM_GET, 0);
+	r = lg_wmab(dev, WM_FAN_MODE, WM_GET, 0);
 	if (!r)
 		return -EIO;
 
@@ -297,9 +281,9 @@ static ssize_t fan_mode_store(struct device *dev,
 
 	m = r->integer.value;
 	kfree(r);
-	r = lg_wmab(WM_FAN_MODE, WM_SET, (m & 0xffffff0f) | (value << 4));
+	r = lg_wmab(dev, WM_FAN_MODE, WM_SET, (m & 0xffffff0f) | (value << 4));
 	kfree(r);
-	r = lg_wmab(WM_FAN_MODE, WM_SET, (m & 0xfffffff0) | value);
+	r = lg_wmab(dev, WM_FAN_MODE, WM_SET, (m & 0xfffffff0) | value);
 	kfree(r);
 
 	return count;
@@ -311,7 +295,7 @@ static ssize_t fan_mode_show(struct device *dev,
 	unsigned int status;
 	union acpi_object *r;
 
-	r = lg_wmab(WM_FAN_MODE, WM_GET, 0);
+	r = lg_wmab(dev, WM_FAN_MODE, WM_GET, 0);
 	if (!r)
 		return -EIO;
 
@@ -338,7 +322,7 @@ static ssize_t usb_charge_store(struct device *dev,
 	if (ret)
 		return ret;
 
-	r = lg_wmbb(WMBB_USB_CHARGE, WM_SET, value);
+	r = lg_wmbb(dev, WMBB_USB_CHARGE, WM_SET, value);
 	if (!r)
 		return -EIO;
 
@@ -352,7 +336,7 @@ static ssize_t usb_charge_show(struct device *dev,
 	unsigned int status;
 	union acpi_object *r;
 
-	r = lg_wmbb(WMBB_USB_CHARGE, WM_GET, 0);
+	r = lg_wmbb(dev, WMBB_USB_CHARGE, WM_GET, 0);
 	if (!r)
 		return -EIO;
 
@@ -380,7 +364,7 @@ static ssize_t reader_mode_store(struct device *dev,
 	if (ret)
 		return ret;
 
-	r = lg_wmab(WM_READER_MODE, WM_SET, value);
+	r = lg_wmab(dev, WM_READER_MODE, WM_SET, value);
 	if (!r)
 		return -EIO;
 
@@ -394,7 +378,7 @@ static ssize_t reader_mode_show(struct device *dev,
 	unsigned int status;
 	union acpi_object *r;
 
-	r = lg_wmab(WM_READER_MODE, WM_GET, 0);
+	r = lg_wmab(dev, WM_READER_MODE, WM_GET, 0);
 	if (!r)
 		return -EIO;
 
@@ -422,7 +406,7 @@ static ssize_t fn_lock_store(struct device *dev,
 	if (ret)
 		return ret;
 
-	r = lg_wmab(WM_FN_LOCK, WM_SET, value);
+	r = lg_wmab(dev, WM_FN_LOCK, WM_SET, value);
 	if (!r)
 		return -EIO;
 
@@ -436,7 +420,7 @@ static ssize_t fn_lock_show(struct device *dev,
 	unsigned int status;
 	union acpi_object *r;
 
-	r = lg_wmab(WM_FN_LOCK, WM_GET, 0);
+	r = lg_wmab(dev, WM_FN_LOCK, WM_GET, 0);
 	if (!r)
 		return -EIO;
 
@@ -466,9 +450,9 @@ static ssize_t battery_care_limit_store(struct device *dev,
 		union acpi_object *r;
 
 		if (battery_limit_use_wmbb)
-			r = lg_wmbb(WMBB_BATT_LIMIT, WM_SET, value);
+			r = lg_wmbb(&pf_device->dev, WMBB_BATT_LIMIT, WM_SET, value);
 		else
-			r = lg_wmab(WM_BATT_LIMIT, WM_SET, value);
+			r = lg_wmab(&pf_device->dev, WM_BATT_LIMIT, WM_SET, value);
 		if (!r)
 			return -EIO;
 
@@ -487,7 +471,7 @@ static ssize_t battery_care_limit_show(struct device *dev,
 	union acpi_object *r;
 
 	if (battery_limit_use_wmbb) {
-		r = lg_wmbb(WMBB_BATT_LIMIT, WM_GET, 0);
+		r = lg_wmbb(&pf_device->dev, WMBB_BATT_LIMIT, WM_GET, 0);
 		if (!r)
 			return -EIO;
 
@@ -498,7 +482,7 @@ static ssize_t battery_care_limit_show(struct device *dev,
 
 		status = r->buffer.pointer[0x10];
 	} else {
-		r = lg_wmab(WM_BATT_LIMIT, WM_GET, 0);
+		r = lg_wmab(&pf_device->dev, WM_BATT_LIMIT, WM_GET, 0);
 		if (!r)
 			return -EIO;
 
@@ -540,7 +524,7 @@ static void tpad_led_set(struct led_classdev *cdev,
 {
 	union acpi_object *r;
 
-	r = lg_wmab(WM_TLED, WM_SET, brightness > LED_OFF);
+	r = lg_wmab(cdev->dev->parent, WM_TLED, WM_SET, brightness > LED_OFF);
 	kfree(r);
 }
 
@@ -562,16 +546,16 @@ static void kbd_backlight_set(struct led_classdev *cdev,
 		val = 0;
 	if (brightness >= LED_FULL)
 		val = 0x24;
-	r = lg_wmab(WM_KEY_LIGHT, WM_SET, val);
+	r = lg_wmab(cdev->dev->parent, WM_KEY_LIGHT, WM_SET, val);
 	kfree(r);
 }
 
-static enum led_brightness get_kbd_backlight_level(void)
+static enum led_brightness get_kbd_backlight_level(struct device *dev)
 {
 	union acpi_object *r;
 	int val;
 
-	r = lg_wmab(WM_KEY_LIGHT, WM_GET, 0);
+	r = lg_wmab(dev, WM_KEY_LIGHT, WM_GET, 0);
 
 	if (!r)
 		return LED_OFF;
@@ -599,7 +583,7 @@ static enum led_brightness get_kbd_backlight_level(void)
 
 static enum led_brightness kbd_backlight_get(struct led_classdev *cdev)
 {
-	return get_kbd_backlight_level();
+	return get_kbd_backlight_level(cdev->dev->parent);
 }
 
 static LED_DEVICE(kbd_backlight, 255, LED_BRIGHT_HW_CHANGED);
@@ -626,6 +610,11 @@ static struct platform_driver pf_driver = {
 
 static int acpi_add(struct acpi_device *device)
 {
+	struct platform_device_info pdev_info = {
+		.fwnode = acpi_fwnode_handle(device),
+		.name = PLATFORM_NAME,
+		.id = PLATFORM_DEVID_NONE,
+	};
 	int ret;
 	const char *product;
 	int year = 2017;
@@ -637,9 +626,7 @@ static int acpi_add(struct acpi_device *device)
 	if (ret)
 		return ret;
 
-	pf_device = platform_device_register_simple(PLATFORM_NAME,
-						    PLATFORM_DEVID_NONE,
-						    NULL, 0);
+	pf_device = platform_device_register_full(&pdev_info);
 	if (IS_ERR(pf_device)) {
 		ret = PTR_ERR(pf_device);
 		pf_device = NULL;
Signature · 1 line
2.43.0
author maintainer
#12 lore raw

PATCH 13/17 btrfs: qgroup: fix quota root leak after quota disable failure

In reply to Sasha Levin

From: Filipe Manana <[email protected]>

[ Upstream commit a7e4c6a3031c74078dba7fa36239d0f4fe476c53 ]

If during the quota disable we fail when cleaning the quota tree or when deleting the root from the root tree, we jump to the 'out' label without ever dropping the reference on the quota root, resulting in a leak of the root since fs_info->quota_root is no longer pointing to the root (we have set it to NULL just before those steps).

Fix this by always doing a btrfs_put_root() call under the 'out' label. This is a problem that exists since qgroups were first added in 2012 by commit bed92eae26cc ("Btrfs: qgroup implementation and prototypes"), but back then we missed a kfree on the quota root and free_extent_buffer() calls on its root and commit root nodes, since back then roots were not yet reference counted.

---
 fs/btrfs/qgroup.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
fs/btrfs/qgroup.c +2 -2
index c50cabf69415f..1f5ab51e18dc4 100644
@@ -1196,7 +1196,7 @@ int btrfs_quota_enable(struct btrfs_fs_info *fs_info)
 
 int btrfs_quota_disable(struct btrfs_fs_info *fs_info)
 {
-	struct btrfs_root *quota_root;
+	struct btrfs_root *quota_root = NULL;
 	struct btrfs_trans_handle *trans = NULL;
 	int ret = 0;
 
@@ -1290,9 +1290,9 @@ int btrfs_quota_disable(struct btrfs_fs_info *fs_info)
 	btrfs_free_tree_block(trans, btrfs_root_id(quota_root),
 			      quota_root->node, 0, 1);
 
-	btrfs_put_root(quota_root);
 
 out:
+	btrfs_put_root(quota_root);
 	mutex_unlock(&fs_info->qgroup_ioctl_lock);
 	if (ret && trans)
 		btrfs_end_transaction(trans);
Signature · 1 line
2.43.0
author maintainer
#13 lore raw

PATCH 14/17 ALSA: hda/relatek: Enable Mute LED on HP Laptop 15-gw0xxx

In reply to Sasha Levin

From: Aivaz Latypov <[email protected]>

[ Upstream commit 1d091a98c399c17d0571fa1d91a7123a698446e4 ]

This HP Laptop uses ALC236 codec with COEF 0x07 controlling the mute LED. Enable existing quirk for this device.

---
 sound/pci/hda/patch_realtek.c | 1 +
 1 file changed, 1 insertion(+)
sound/pci/hda/patch_realtek.c +1 -0
index c7529aa13f944..d31758cf2ad35 100644
@@ -9156,6 +9156,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {
 	SND_PCI_QUIRK(0x103c, 0x8788, "HP OMEN 15", ALC285_FIXUP_HP_MUTE_LED),
 	SND_PCI_QUIRK(0x103c, 0x87b7, "HP Laptop 14-fq0xxx", ALC236_FIXUP_HP_MUTE_LED_COEFBIT2),
 	SND_PCI_QUIRK(0x103c, 0x87c8, "HP", ALC287_FIXUP_HP_GPIO_LED),
+	SND_PCI_QUIRK(0x103c, 0x87d3, "HP Laptop 15-gw0xxx", ALC236_FIXUP_HP_MUTE_LED_COEFBIT2),
 	SND_PCI_QUIRK(0x103c, 0x87e5, "HP ProBook 440 G8 Notebook PC", ALC236_FIXUP_HP_GPIO_LED),
 	SND_PCI_QUIRK(0x103c, 0x87e7, "HP ProBook 450 G8 Notebook PC", ALC236_FIXUP_HP_GPIO_LED),
 	SND_PCI_QUIRK(0x103c, 0x87f1, "HP ProBook 630 G8 Notebook PC", ALC236_FIXUP_HP_GPIO_LED),
Signature · 1 line
2.43.0
author maintainer
#14 lore raw

PATCH 15/17 ALSA: dmaengine_pcm: terminate dmaengine before synchronize

In reply to Sasha Levin

From: Shengjiu Wang <[email protected]>

[ Upstream commit 6a7db25aad8ce6512b366d2ce1d0e60bac00a09d ]

When dmaengine supports pause function, in suspend state, dmaengine_pause() is called instead of dmaengine_terminate_async(),

In end of playback stream, the runtime->state will go to SNDRV_PCM_STATE_DRAINING, if system suspend & resume happen at this time, application will not resume playback stream, the stream will be closed directly, the dmaengine_terminate_async() will not be called before the dmaengine_synchronize(), which violates the call sequence for dmaengine_synchronize().

This behavior also happens for capture streams, but there is no SNDRV_PCM_STATE_DRAINING state for capture. So use dmaengine_tx_status() to check the DMA status if the status is DMA_PAUSED, then call dmaengine_terminate_async() to terminate dmaengine before dmaengine_synchronize().

---
 sound/core/pcm_dmaengine.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)
sound/core/pcm_dmaengine.c +12 -0
index 3e479dca122a0..9f953ff8b0645 100644
@@ -361,6 +361,12 @@ EXPORT_SYMBOL_GPL(snd_dmaengine_pcm_sync_stop);
 int snd_dmaengine_pcm_close(struct snd_pcm_substream *substream)
 {
 	struct dmaengine_pcm_runtime_data *prtd = substream_to_prtd(substream);
+	struct dma_tx_state state;
+	enum dma_status status;
+
+	status = dmaengine_tx_status(prtd->dma_chan, prtd->cookie, &state);
+	if (status == DMA_PAUSED)
+		dmaengine_terminate_async(prtd->dma_chan);
 
 	dmaengine_synchronize(prtd->dma_chan);
 	kfree(prtd);
@@ -379,6 +385,12 @@ EXPORT_SYMBOL_GPL(snd_dmaengine_pcm_close);
 int snd_dmaengine_pcm_close_release_chan(struct snd_pcm_substream *substream)
 {
 	struct dmaengine_pcm_runtime_data *prtd = substream_to_prtd(substream);
+	struct dma_tx_state state;
+	enum dma_status status;
+
+	status = dmaengine_tx_status(prtd->dma_chan, prtd->cookie, &state);
+	if (status == DMA_PAUSED)
+		dmaengine_terminate_async(prtd->dma_chan);
 
 	dmaengine_synchronize(prtd->dma_chan);
 	dma_release_channel(prtd->dma_chan);
Signature · 1 line
2.43.0
author maintainer
#15 lore raw

PATCH 16/17 parisc: use generic sys_fanotify_mark implementation

In reply to Sasha Levin

From: Arnd Bergmann <[email protected]>

[ Upstream commit 403f17a330732a666ae793f3b15bc75bb5540524 ]

The sys_fanotify_mark() syscall on parisc uses the reverse word order for the two halves of the 64-bit argument compared to all syscalls on all 32-bit architectures. As far as I can tell, the problem is that the function arguments on parisc are sorted backwards (26, 25, 24, 23, ...) compared to everyone else, so the calling conventions of using an even/odd register pair in native word order result in the lower word coming first in function arguments, matching the expected behavior on little-endian architectures. The system call conventions however ended up matching what the other 32-bit architectures do.

A glibc cleanup in 2020 changed the userspace behavior in a way that handles all architectures consistently, but this inadvertently broke parisc32 by changing to the same method as everyone else.

The change made it into glibc-2.35 and subsequently into debian 12 (bookworm), which is the latest stable release. This means we need to choose between reverting the glibc change or changing the kernel to match it again, but either hange will leave some systems broken.

Pick the option that is more likely to help current and future users and change the kernel to match current glibc. This also means the behavior is now consistent across architectures, but it breaks running new kernels with old glibc builds before 2.35.

---
I found this through code inspection, please double-check to make sure I got the bug and the fix right.

The alternative is to fix this by reverting glibc back to the unusual behavior.

---
 arch/parisc/Kconfig                     | 1 +
 arch/parisc/kernel/sys_parisc32.c       | 9 ---------
 arch/parisc/kernel/syscalls/syscall.tbl | 2 +-
 3 files changed, 2 insertions(+), 10 deletions(-)
arch/parisc/Kconfig +1 -0
index 117b0f882750a..6ac0c4b98e281 100644
@@ -12,6 +12,7 @@ config PARISC
 	select ARCH_HAS_STRICT_MODULE_RWX
 	select ARCH_HAS_UBSAN_SANITIZE_ALL
 	select ARCH_NO_SG_CHAIN
+	select ARCH_SPLIT_ARG64 if !64BIT
 	select ARCH_SUPPORTS_HUGETLBFS if PA20
 	select ARCH_SUPPORTS_MEMORY_FAILURE
 	select DMA_OPS
arch/parisc/kernel/sys_parisc32.c +0 -9
index 2a12a547b447b..826c8e51b5853 100644
@@ -23,12 +23,3 @@ asmlinkage long sys32_unimplemented(int r26, int r25, int r24, int r23,
     	current->comm, current->pid, r20);
     return -ENOSYS;
 }
-
-asmlinkage long sys32_fanotify_mark(compat_int_t fanotify_fd, compat_uint_t flags,
-	compat_uint_t mask0, compat_uint_t mask1, compat_int_t dfd,
-	const char  __user * pathname)
-{
-	return sys_fanotify_mark(fanotify_fd, flags,
-			((__u64)mask1 << 32) | mask0,
-			 dfd, pathname);
-}
arch/parisc/kernel/syscalls/syscall.tbl +1 -1
index 50c759f11c25d..d47f7f8accaf5 100644
@@ -364,7 +364,7 @@
 320	common	accept4			sys_accept4
 321	common	prlimit64		sys_prlimit64
 322	common	fanotify_init		sys_fanotify_init
-323	common	fanotify_mark		sys_fanotify_mark		sys32_fanotify_mark
+323	common	fanotify_mark		sys_fanotify_mark		compat_sys_fanotify_mark
 324	32	clock_adjtime		sys_clock_adjtime32
 324	64	clock_adjtime		sys_clock_adjtime
 325	common	name_to_handle_at	sys_name_to_handle_at
Signature · 1 line
2.43.0
author maintainer
#16 lore raw

PATCH 17/17 net: usb: qmi_wwan: add Telit FN912 compositions

In reply to Sasha Levin

From: Daniele Palmas <[email protected]>

[ Upstream commit 77453e2b015b5ced5b3f45364dd5a72dfc3bdecb ]

Add the following Telit FN912 compositions:

0x3000: rmnet + tty (AT/NMEA) + tty (AT) + tty (diag)

T:  Bus=03 Lev=01 Prnt=03 Port=07 Cnt=01 Dev#=  8 Spd=480  MxCh= 0
D:  Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1bc7 ProdID=3000 Rev=05.15
S:  Manufacturer=Telit Cinterion
S:  Product=FN912
S:  SerialNumber=92c4c4d8
C:  #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

0x3001: rmnet + tty (AT) + tty (diag) + DPL (data packet logging) + adb

T:  Bus=03 Lev=01 Prnt=03 Port=07 Cnt=01 Dev#=  7 Spd=480  MxCh= 0
D:  Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1bc7 ProdID=3001 Rev=05.15
S:  Manufacturer=Telit Cinterion
S:  Product=FN912
S:  SerialNumber=92c4c4d8
C:  #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
---
 drivers/net/usb/qmi_wwan.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/net/usb/qmi_wwan.c +2 -0
index 9bd145732e58b..fb09e95cbc258 100644
@@ -1373,6 +1373,8 @@ static const struct usb_device_id products[] = {
 	{QMI_QUIRK_SET_DTR(0x1bc7, 0x1260, 2)},	/* Telit LE910Cx */
 	{QMI_QUIRK_SET_DTR(0x1bc7, 0x1261, 2)},	/* Telit LE910Cx */
 	{QMI_QUIRK_SET_DTR(0x1bc7, 0x1900, 1)},	/* Telit LN940 series */
+	{QMI_QUIRK_SET_DTR(0x1bc7, 0x3000, 0)},	/* Telit FN912 series */
+	{QMI_QUIRK_SET_DTR(0x1bc7, 0x3001, 0)},	/* Telit FN912 series */
 	{QMI_FIXED_INTF(0x1c9e, 0x9801, 3)},	/* Telewell TW-3G HSPA+ */
 	{QMI_FIXED_INTF(0x1c9e, 0x9803, 4)},	/* Telewell TW-3G HSPA+ */
 	{QMI_FIXED_INTF(0x1c9e, 0x9b01, 3)},	/* XS Stick W100-2 from 4G Systems */
Signature · 1 line
2.43.0