ASoC: dt-bindings: cirrus,cs42xx8: Convert to dtschema
Subsystems (4)
PATCH 1/1 ASoC: dt-bindings: cirrus,cs42xx8: Convert to dtschema
Convert the Cirrus Logic CS42448/CS42888 audio CODEC bindings to DT schema format. Set power supply properties to required only for CS42888.
--- .../bindings/sound/cirrus,cs42xx8.yaml | 81 +++++++++++++++++++ .../devicetree/bindings/sound/cs42xx8.txt | 34 -------- 2 files changed, 81 insertions(+), 34 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/cirrus,cs42xx8.yaml delete mode 100644 Documentation/devicetree/bindings/sound/cs42xx8.txt
Documentation/devicetree/bindings/sound/cirrus,cs42xx8.yaml new file +81 -0
@@ -0,0 +1,81 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/cirrus,cs42xx8.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cirrus Logic CS42448/CS42888 audio CODEC + +maintainers: + - [email protected] + +properties: + compatible: + enum: + - cirrus,cs42448 + - cirrus,cs42888 + + reg: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + const: mclk + + VA-supply: + description: Analog power supply. + + VD-supply: + description: Digital power supply. + + VLC-supply: + description: Control port power supply + + VLS-supply: + description: Serial port interface power supply. + + reset-gpios: + description: This pin is connected to the chip's RESET pin. + maxItems: 1 + +required: + - compatible + - reg + - clocks + - clock-names + +if: + properties: + compatible: + contains: + const: cirrus,cs42888 +then: + required: + - VA-supply + - VD-supply + - VLC-supply + - VLS-supply + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + codec@48 { + compatible = "cirrus,cs42888"; + reg = <0x48>; + clocks = <&codec_mclk 0>; + clock-names = "mclk"; + VA-supply = <®_audio>; + VD-supply = <®_audio>; + VLS-supply = <®_audio>; + VLC-supply = <®_audio>; + reset-gpios = <&gpio 1>; + }; + };
Documentation/devicetree/bindings/sound/cs42xx8.txt deleted +0 -34
@@ -1,34 +0,0 @@ -CS42448/CS42888 audio CODEC - -Required properties: - - - compatible : must contain one of "cirrus,cs42448" and "cirrus,cs42888" - - - reg : the I2C address of the device for I2C - - - clocks : a list of phandles + clock-specifiers, one for each entry in - clock-names - - - clock-names : must contain "mclk" - - - VA-supply, VD-supply, VLS-supply, VLC-supply: power supplies for the device, - as covered in Documentation/devicetree/bindings/regulator/regulator.txt - -Optional properties: - - - reset-gpios : a GPIO spec to define which pin is connected to the chip's - !RESET pin - -Example: - -cs42888: codec@48 { - compatible = "cirrus,cs42888"; - reg = <0x48>; - clocks = <&codec_mclk 0>; - clock-names = "mclk"; - VA-supply = <®_audio>; - VD-supply = <®_audio>; - VLS-supply = <®_audio>; - VLC-supply = <®_audio>; - reset-gpios = <&pca9557_b 1 GPIO_ACTIVE_LOW>; -};
Signature · 1 line
2.45.2
Quoted 12 lines · Animesh Agarwal
Convert the Cirrus Logic CS42448/CS42888 audio CODEC bindings to DT schema format. Set power supply properties to required only for CS42888.
Cc Daniel Baluta <[email protected]>Signed-off-by Animesh Agarwal <[email protected]>--- .../bindings/sound/cirrus,cs42xx8.yaml | 81 +++++++++++++++++++ .../devicetree/bindings/sound/cs42xx8.txt | 34 -------- 2 files changed, 81 insertions(+), 34 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/cirrus,cs42xx8.yaml delete mode 100644 Documentation/devicetree/bindings/sound/cs42xx8.txt
Mark Brown
maintainerQuoted 4 lines · Animesh Agarwal
Convert the Cirrus Logic CS42448/CS42888 audio CODEC bindings to DT schema format. Set power supply properties to required only for CS42888.
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next
Thanks!
[1/1] ASoC: dt-bindings: cirrus,cs42xx8: Convert to dtschema
commit: e3fff693da9fa0337d98dab496db3a04c5227aae
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark