package/pico-sdk: new package
PATCH v2 1/2 package/pico-sdk: new package
Add the pi-pico sdk as a dependency for picotool. This is a bit of a weird package, because you normally clone the git repository and point the picotool (or rp2040 firmware project) build to it.
For picotool specifically, only headers are used from the sdk, for building a firmware project, it is included as source files via cmake, so this pretty much has the same semantics for that as well.
--- package/Config.in | 1 + package/pico-sdk/Config.in | 9 +++++++++ package/pico-sdk/pico-sdk.hash | 3 +++ package/pico-sdk/pico-sdk.mk | 20 ++++++++++++++++++++ 4 files changed, 33 insertions(+) create mode 100644 package/pico-sdk/Config.in create mode 100644 package/pico-sdk/pico-sdk.hash create mode 100644 package/pico-sdk/pico-sdk.mk
package/Config.in +1 -0
@@ -1785,6 +1785,7 @@ menu "Hardware handling" source "package/opensc/Config.in" source "package/owfs/Config.in" source "package/pcsc-lite/Config.in" + source "package/pico-sdk/Config.in" source "package/rpi-rgb-led-matrix/Config.in" source "package/tslib/Config.in" source "package/uhd/Config.in"
package/pico-sdk/Config.in new file +9 -0
@@ -0,0 +1,9 @@ +config BR2_PACKAGE_PICO_SDK + bool "pico-sdk" + help + Raspberry Pi Pico SDK. Provides the headers, libraries + and build system necessary to write programs for the + RP2040-based devices such as the Raspberry Pi Pico in + C, C++ or assembly language. + + https://github.com/raspberrypi/pico-sdk
package/pico-sdk/pico-sdk.hash new file +3 -0
@@ -0,0 +1,3 @@ +# Locally calculated +sha256 95f5e522be3919e36a47975ffd3b208c38880c14468bd489ac672cfe3cec803c pico-sdk-1.5.1.tar.gz +sha256 483f865953435b66c443dee7558debe3cc3cf8fcbb6a112fd9fc6a795d53f1f6 LICENSE.TXT
package/pico-sdk/pico-sdk.mk new file +20 -0
@@ -0,0 +1,20 @@ +################################################################################ +# +# pico-sdk +# +################################################################################ + +PICO_SDK_VERSION = 1.5.1 +PICO_SDK_SITE = $(call github,raspberrypi,pico-sdk,$(PICO_SDK_VERSION)) +PICO_SDK_LICENSE = BSD-3-Clause +PICO_SDK_LICENSE_FILES = LICENSE.TXT +PICO_SDK_INSTALL_STAGING = YES +# Header-only lib, as far as buildroot is concerned +PICO_SDK_INSTALL_TARGET = NO + +define PICO_SDK_INSTALL_STAGING_CMDS + mkdir -p $(STAGING_DIR)/usr/include/pico-sdk + cp -r $(@D)/* $(STAGING_DIR)/usr/include/pico-sdk +endef + +$(eval $(generic-package))
Signature · 6 lines
2.34.1 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
PATCH v2 2/2 package/picotool: new package
Add the raspberry pi picotool for interacting with rp2040 binaries and devices.
---
Changes v1 -> v2:
- fix check-package
package/Config.in | 1 + package/picotool/Config.in | 16 ++++++++++++++++ package/picotool/picotool.hash | 3 +++ package/picotool/picotool.mk | 15 +++++++++++++++ 4 files changed, 35 insertions(+) create mode 100644 package/picotool/Config.in create mode 100644 package/picotool/picotool.hash create mode 100644 package/picotool/picotool.mk
package/Config.in +1 -0
@@ -583,6 +583,7 @@ endmenu source "package/pciutils/Config.in" source "package/pdbg/Config.in" source "package/picocom/Config.in" + source "package/picotool/Config.in" source "package/pifmrds/Config.in" source "package/pigpio/Config.in" source "package/powertop/Config.in"
package/picotool/Config.in new file +16 -0
@@ -0,0 +1,16 @@ +comment "picotool needs a toolchain w/ C++ and gcc >= 4.9" + depends on !BR2_INSTALL_LIBSTDCPP || !BR2_HOST_GCC_AT_LEAST_4_9 + +config BR2_PACKAGE_PICOTOOL + bool "picotool" + depends on BR2_INSTALL_LIBSTDCPP + depends on BR2_HOST_GCC_AT_LEAST_4_9 # libusb + select BR2_PACKAGE_LIBUSB + select BR2_PACKAGE_PICO_SDK + help + picotool is a tool for inspecting rp2040 binaries and + interacting with rp2040 devices when they are in bootsel + mode or devices USBstdio support from the Raspberry Pi Pico + SDK. + + https://github.com/raspberrypi/picotool
package/picotool/picotool.hash new file +3 -0
@@ -0,0 +1,3 @@ +# Locally calculated +sha256 f1746ead7815c13be1152f0645db8ea3b277628eb0110d42a0a186db37d40a91 1.1.2.tar.gz +sha256 483f865953435b66c443dee7558debe3cc3cf8fcbb6a112fd9fc6a795d53f1f6 LICENSE.TXT
package/picotool/picotool.mk new file +15 -0
@@ -0,0 +1,15 @@ +################################################################################ +# +# picotool +# +################################################################################ + +PICOTOOL_VERSION = 1.1.2 +PICOTOOL_SITE = https://github.com/raspberrypi/picotool/archive/refs/tags +PICOTOOL_SOURCE = $(PICOTOOL_VERSION).tar.gz +PICOTOOL_CONF_OPTS = -DPICO_SDK_PATH=$(STAGING_DIR)/usr/include/pico-sdk +PICOTOOL_DEPENDENCIES = libusb pico-sdk +PICOTOOL_LICENSE = BSD-3-Clause +PICOTOOL_LICENSE_FILES = LICENSE.TXT + +$(eval $(cmake-package))
Signature · 6 lines
2.34.1 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
Re: [Buildroot] [PATCH v2 2/2] package/picotool: new package
Hello Marcus,
package/picotool/Config.in line 16
Quoted 13 lines · On Wed, 28 Feb 2024 21:24:13 +0100 Marcus Hoffmann via buildroot…
package/picotool/Config.in new file +13
-0+config BR2_PACKAGE_PICOTOOL + bool "picotool" + depends on BR2_INSTALL_LIBSTDCPP + depends on BR2_HOST_GCC_AT_LEAST_4_9 # libusb + select BR2_PACKAGE_LIBUSB + select BR2_PACKAGE_PICO_SDK + help + picotool is a tool for inspecting rp2040 binaries and + interacting with rp2040 devices when they are in bootsel + mode or devices USBstdio support from the Raspberry Pi Pico + SDK. + + https://github.com/raspberrypi/picotool
Could you give some details on the use case for having picotool on your target? In which context is your RP2040 connected to your target system generated by Buildroot?
Thomas
Signature · 7 lines
Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
Re: [Buildroot] [PATCH v2 2/2] package/picotool: new package
Hi Thomas,
Quoted 5 lines · Thomas Petazzoni via buildroot
Hello Marcus,
On Wed, 28 Feb 2024 21:24:13 +0100
Marcus Hoffmann via buildroot <[email protected]> wrote:
Quoted 10 lines
package/picotool/Config.in line 13
Quoted 10 lines
package/picotool/Config.in new file +10
-0+config BR2_PACKAGE_PICOTOOL + bool "picotool" + depends on BR2_INSTALL_LIBSTDCPP + depends on BR2_HOST_GCC_AT_LEAST_4_9 # libusb + select BR2_PACKAGE_LIBUSB + select BR2_PACKAGE_PICO_SDK + help + picotool is a tool for inspecting rp2040 binaries and + interacting with rp2040 devices when they are in bootsel + mode or devices USBstdio support from the Raspberry Pi Pico
Just noticed this is missing a "with" between devices and USBstdio.
Quoted 7 lines
package/picotool/Config.in line 16
Quoted 3 lines
package/picotool/Config.in new file +3
-0+ SDK. + + https://github.com/raspberrypi/picotoolCould you give some details on the use case for having picotool on your target? In which context is your RP2040 connected to your target system generated by Buildroot?
We use it to to reboot a usb-connected rp2040 devices into bootloader mode from where you can apply a firmware update. (This requires using the pico sdk for the rp2040 firmware and setting a specific flag when setting up the usb support)
Does that help?
Quoted 2 lines
Thomas
Best,
Marcus
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
Re: [Buildroot] [PATCH v2 2/2] package/picotool: new package
In reply to Marcus Hoffmann via buildrootHello Marcus,
Quoted 8 lines · On Wed, 28 Feb 2024 21:24:13 +0100 Marcus Hoffmann via buildroot…
package/Config.in | 1 + package/picotool/Config.in | 16 ++++++++++++++++ package/picotool/picotool.hash | 3 +++ package/picotool/picotool.mk | 15 +++++++++++++++ 4 files changed, 35 insertions(+) create mode 100644 package/picotool/Config.in create mode 100644 package/picotool/picotool.hash create mode 100644 package/picotool/picotool.mk
Entry in the DEVELOPERS file was missing, so I added one.
Quoted 6 lines
package/picotool/picotool.mk new file +0
-0
package/picotool/picotool.mk line 8
Quoted 8 lines
package/picotool/picotool.mk new file +8
-0@@ -0,0 +1,15 @@ +################################################################################ +# +# picotool +# +################################################################################ + +PICOTOOL_VERSION = 1.1.2 +PICOTOOL_SITE = https://github.com/raspberrypi/picotool/archive/refs/tags
This should have used the $(call github,...) macro since they don't provide specific tarballs other than the auto-generated ones.
package/picotool/picotool.mk line 9
Quoted 1 line
package/picotool/picotool.mk new file +1
-0+PICOTOOL_SOURCE = $(PICOTOOL_VERSION).tar.gz
This can therefore go.
package/picotool/picotool.mk line 10
Quoted 1 line
package/picotool/picotool.mk new file +1
-0+PICOTOOL_CONF_OPTS = -DPICO_SDK_PATH=$(STAGING_DIR)/usr/include/pico-sdk
And this had to be adjusted to usr/share/pico-sdk.
Applied with those minor fixes. Thanks!
Thomas
Signature · 7 lines
Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
Hello,
Quoted 8 lines · On Wed, 28 Feb 2024 21:24:12 +0100 Marcus Hoffmann via buildroot…
package/Config.in | 1 + package/pico-sdk/Config.in | 9 +++++++++ package/pico-sdk/pico-sdk.hash | 3 +++ package/pico-sdk/pico-sdk.mk | 20 ++++++++++++++++++++ 4 files changed, 33 insertions(+) create mode 100644 package/pico-sdk/Config.in create mode 100644 package/pico-sdk/pico-sdk.hash create mode 100644 package/pico-sdk/pico-sdk.mk
Entry in DEVELOPERS file was missing, so I added one.
package/pico-sdk/pico-sdk.mk line 17
Quoted 3 lines
package/pico-sdk/pico-sdk.mk new file +3
-0+define PICO_SDK_INSTALL_STAGING_CMDS + mkdir -p $(STAGING_DIR)/usr/include/pico-sdk + cp -r $(@D)/* $(STAGING_DIR)/usr/include/pico-sdk
Since it's not just headers, but a big pile of stuff, I changed to install it to usr/share/pico-sdk instead.
Applied with those changes. Thanks!
Thomas
Signature · 7 lines
Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot