package/wilc-driver: bump version to 2024.04
PATCH 1/1 package/wilc-driver: bump version to 2024.04
This driver supports up to Linux version 6.6. Let's also drop local patches.
--- ...missing-prandom_u32-with-Linux-6.1.0.patch | 34 --- ...fix-build-failure-on-remove-callback.patch | 44 ---- ...uild-failure-with-Linux-5.19-and-6.1.patch | 98 -------- ...on_parameters-Linux-6.1-build-failur.patch | 216 ------------------ .../wilc-driver/0005-Fix-cast-warnings.patch | 43 ---- .../wilc-driver/0006-Support-Linux-6.3.patch | 43 ---- .../wilc-driver/0007-Support-Linux-6.4.patch | 36 --- package/wilc-driver/wilc-driver.hash | 2 +- package/wilc-driver/wilc-driver.mk | 2 +- 9 files changed, 2 insertions(+), 516 deletions(-) delete mode 100644 package/wilc-driver/0001-cfg80211.c-fix-missing-prandom_u32-with-Linux-6.1.0.patch delete mode 100644 package/wilc-driver/0002-spi.c-fix-build-failure-on-remove-callback.patch delete mode 100644 package/wilc-driver/0003-cfg80211.c-fix-build-failure-with-Linux-5.19-and-6.1.patch delete mode 100644 package/wilc-driver/0004-Fix-struct-station_parameters-Linux-6.1-build-failur.patch delete mode 100644 package/wilc-driver/0005-Fix-cast-warnings.patch delete mode 100644 package/wilc-driver/0006-Support-Linux-6.3.patch delete mode 100644 package/wilc-driver/0007-Support-Linux-6.4.patch
package/wilc-driver/0001-cfg80211.c-fix-missing-prandom_u32-with-Linux-6.1.0.patch deleted +0 -34
@@ -1,34 +0,0 @@ -From f80e4343fa0a4d8b22933d1704c85a771fe234a4 Mon Sep 17 00:00:00 2001 -From: Giulio Benetti <[email protected]> -Date: Wed, 28 Dec 2022 19:56:46 +0100 -Subject: [PATCH] cfg80211.c: fix missing prandom_u32() with Linux >= 6.1.0 - -prandom_u32() previously was only calling get_random_u32() so it's been -dropped with Linux 6.1.0. So let's directly call get_random_u32() if Linux -version >= 6.1.0. - -[Upstream status: https://github.com/embeddedTS/wilc3000-external-module/pull/2] -Signed-off-by: Giulio Benetti <[email protected]> ---- - cfg80211.c | 4 ++++ - 1 file changed, 4 insertions(+) - -diff --git a/cfg80211.c b/cfg80211.c -index 016aa06..41edd02 100644 ---- a/cfg80211.c -+++ b/cfg80211.c -@@ -1422,7 +1422,11 @@ static int mgmt_tx(struct wiphy *wiphy, - const u8 *vendor_ie; - int ret = 0; - -+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(6, 1, 0)) -+ *cookie = get_random_u32(); -+#else - *cookie = prandom_u32(); -+#endif - priv->tx_cookie = *cookie; - mgmt = (const struct ieee80211_mgmt *)buf; - --- -2.34.1 -
package/wilc-driver/0002-spi.c-fix-build-failure-on-remove-callback.patch deleted +0 -44
44 lines not on this page · raw message
package/wilc-driver/0003-cfg80211.c-fix-build-failure-with-Linux-5.19-and-6.1.patch deleted +0 -98
98 lines not on this page · raw message
package/wilc-driver/0004-Fix-struct-station_parameters-Linux-6.1-build-failur.patch deleted +0 -216
216 lines not on this page · raw message
package/wilc-driver/0005-Fix-cast-warnings.patch deleted +0 -43
43 lines not on this page · raw message
package/wilc-driver/0006-Support-Linux-6.3.patch deleted +0 -43
43 lines not on this page · raw message
package/wilc-driver/0007-Support-Linux-6.4.patch deleted +0 -36
@@ -1,36 +0,0 @@ -From 94fc4594659494b8c5cbdf1a719aea4d66d3398d Mon Sep 17 00:00:00 2001 -From: Giulio Benetti <[email protected]> -Date: Wed, 27 Sep 2023 11:20:50 +0200 -Subject: [PATCH] Support Linux 6.4 - -With Linux 6.4 commit: -https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=1aaba11da9aa7d7d6b52a74d45b31cac118295a1 -class_create() doesn't require first argument THIS_MODULE anymore so let's -drop first argument if Linux version >= 6.4 - -Upstream: https://github.com/embeddedTS/wilc3000-external-module/pull/5 - -Signed-off-by: Giulio Benetti <[email protected]> ---- - bt.c | 4 ++++ - 1 file changed, 4 insertions(+) - -diff --git a/bt.c b/bt.c -index 48a5302..a752457 100644 ---- a/bt.c -+++ b/bt.c -@@ -135,7 +135,11 @@ static void wilc_bt_create_device(void) - ret = alloc_chrdev_region(&chc_dev_no, 0, 1, "atmel"); - if (ret < 0) - return; -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(6, 4, 0) -+ chc_dev_class = class_create("atmel"); -+#else - chc_dev_class = class_create(THIS_MODULE, "atmel"); -+#endif - if (IS_ERR(chc_dev_class)) { - unregister_chrdev_region(chc_dev_no, 1); - return; --- -2.34.1 -
package/wilc-driver/wilc-driver.hash +1 -1
@@ -1,3 +1,3 @@ # Locally calculated -sha256 4796b1a53781f8702a335b0146d488a9422b71dab39f6f154f955b0ad1711199 wilc-driver-linux4microchip-2021.10-1.tar.gz +sha256 66e9d889a5dbfad91c74f52df497d9ef9e353559231e4bc251136422bfc0cc00 wilc-driver-linux4microchip-2024.04.tar.gz sha256 f6b78c087c3ebdf0f3c13415070dd480a3f35d8fc76f3d02180a407c1c812f79 LICENSE
package/wilc-driver/wilc-driver.mk +1 -1
@@ -4,7 +4,7 @@ # ################################################################################ -WILC_DRIVER_VERSION = linux4microchip-2021.10-1 +WILC_DRIVER_VERSION = linux4microchip-2024.04 WILC_DRIVER_SITE = $(call github,embeddedTS,wilc3000-external-module,$(WILC_DRIVER_VERSION)) WILC_DRIVER_LICENSE = GPL-2.0
Signature · 6 lines
2.34.1 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
Quoted 2 lines · Giulio Benetti
This driver supports up to Linux version 6.6. Let's also drop local patches.
Be advised that this does NOT support "up to" Linux 6.6. The latest updates from Microchip drop any backwards compatibility support, which is why we have not pushed this up to Buildroot yet.
I think this only will support kernels 6.2~6.6 and currently do not believe it will compile against upstream Linux 6.9 (I tested it a while ago but don't remember the outcome as it wasn't important).
As I mentioned in my previous email responding to build failures, we're working on a solution to be able to handle backwards compatibility with 'backports' but are first catching up on other tasks.
Quoted 719 lines
Signed-off-by Giulio Benetti <[email protected]>---
...missing-prandom_u32-with-Linux-6.1.0.patch | 34 --- ...fix-build-failure-on-remove-callback.patch | 44 ---- ...uild-failure-with-Linux-5.19-and-6.1.patch | 98 -------- ...on_parameters-Linux-6.1-build-failur.patch | 216 ---------------- -- .../wilc-driver/0005-Fix-cast-warnings.patch | 43 ---- .../wilc-driver/0006-Support-Linux-6.3.patch | 43 ---- .../wilc-driver/0007-Support-Linux-6.4.patch | 36 --- package/wilc-driver/wilc-driver.hash | 2 +- package/wilc-driver/wilc-driver.mk | 2 +- 9 files changed, 2 insertions(+), 516 deletions(-)delete mode 100644 package/wilc-driver/0001-cfg80211.c-fix-missing- prandom_u32-with-Linux-6.1.0.patch
delete mode 100644 package/wilc-driver/0002-spi.c-fix-build-failure- on-remove-callback.patch
delete mode 100644 package/wilc-driver/0003-cfg80211.c-fix-build- failure-with-Linux-5.19-and-6.1.patch
delete mode 100644 package/wilc-driver/0004-Fix-struct- station_parameters-Linux-6.1-build-failur.patch
delete mode 100644package/wilc-driver/0005-Fix-cast-warnings.patchdelete mode 100644package/wilc-driver/0006-Support-Linux-6.3.patchdelete mode 100644package/wilc-driver/0007-Support-Linux-6.4.patch(quoted diff) +0
-0prandom_u32-with-Linux-6.1.0.patch b/package/wilc-driver/0001- cfg80211.c-fix-missing-prandom_u32-with-Linux-6.1.0.patch deleted file mode 100644
index 2f10627301..0000000000
--- a/package/wilc-driver/0001-cfg80211.c-fix-missing-prandom_u32- with-Linux-6.1.0.patch
+++/dev/null(quoted diff) +0
-1@@ -1,34 +0,0 @@ -From f80e4343fa0a4d8b22933d1704c85a771fe234a4 Mon Sep 17 00:00:002001
package/wilc-driver/0001-cfg80211.c-fix-missing-prandom_u32-with-Linux-6.1.0.patch deleted +0
-3-From: Giulio Benetti <[email protected]> -Date: Wed, 28 Dec 2022 19:56:46 +0100 -Subject: [PATCH] cfg80211.c: fix missing prandom_u32() with Linux >=6.1.0
(quoted diff) +0
-2- -prandom_u32() previously was only calling get_random_u32() so it'sbeen
-dropped with Linux 6.1.0. So let's directly callget_random_u32()if Linuxpackage/wilc-driver/0001-cfg80211.c-fix-missing-prandom_u32-with-Linux-6.1.0.patch deleted +0
-3-version >= 6.1.0. - -[Upstream status:https://github.com/embeddedTS/wilc3000-external-module/pull/2]
-Signed-off-by: Giulio Benetti
<[email protected]>
----
-cfg80211.c| 4 ++++
- 1 file changed, 4 insertions(+)package/wilc-driver/0001-cfg80211.c-fix-missing-prandom_u32-with-Linux-6.1.0.patch deleted +0
-20- -diff --git a/cfg80211.c b/cfg80211.c -index 016aa06..41edd02 100644 ---- a/cfg80211.c -+++ b/cfg80211.c -@@ -1422,7 +1422,11 @@ static int mgmt_tx(struct wiphy *wiphy, - const u8 *vendor_ie; - int ret = 0; - -+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(6, 1, 0)) -+ *cookie = get_random_u32(); -+#else - *cookie = prandom_u32(); -+#endif - priv->tx_cookie = *cookie; - mgmt = (const struct ieee80211_mgmt *)buf; - --- -2.34.1 -(quoted diff) +0
-0remove-callback.patch b/package/wilc-driver/0002-spi.c-fix-build- failure-on-remove-callback.patch
deleted file mode 100644
index 87306dfa12..0000000000
--- a/package/wilc-driver/0002-spi.c-fix-build-failure-on-remove- callback.patch
+++/dev/null(quoted diff) +0
-1@@ -1,44 +0,0 @@ -From a88819bd63f977b5a33d72a2b9e264ce104726bd Mon Sep 17 00:00:002001
package/wilc-driver/0002-spi.c-fix-build-failure-on-remove-callback.patch deleted +0
-5-From: Giulio Benetti <[email protected]> -Date: Wed, 28 Dec 2022 21:02:12 +0100 -Subject: [PATCH] spi.c: fix build failure on remove callback - -Starting from Linux 5.18 remove callback returns void, so let's dealwith
package/wilc-driver/0002-spi.c-fix-build-failure-on-remove-callback.patch deleted +0
-3-it depending on Linux version >= 5.18. - -[Upstream status:https://github.com/embeddedTS/wilc3000-external-module/pull/2]
-Signed-off-by: Giulio Benetti
<[email protected]>
----
-spi.c| 7 +++++++
- 1 file changed, 7 insertions(+)package/wilc-driver/0002-spi.c-fix-build-failure-on-remove-callback.patch deleted +0
-18- -diff --git a/spi.c b/spi.c -index 96c51fe..f7b43e2 100644 ---- a/spi.c -+++ b/spi.c -@@ -211,7 +211,11 @@ free: - return ret; - } - -+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(5,18,0)) -+static void wilc_bus_remove(struct spi_device *spi) -+#else - static int wilc_bus_remove(struct spi_device *spi) -+#endif - { - struct wilc *wilc = spi_get_drvdata(spi); - -@@ -220,7 +224,10 @@ static int wilc_bus_remove(struct spi_device*spi)
-
- wilc_netdev_cleanup(wilc);
- wilc_bt_deinit();
-+
-+#if (LINUX_VERSION_CODE<KERNEL_VERSION(5,18,0)) - return 0;
-+#endif
- }
-
- static intwilc_spi_suspend(struct device *dev)
---
-2.34.1(quoted diff) +0
-1-(quoted diff) +0
-0with-Linux-5.19-and-6.1.patch b/package/wilc-driver/0003-cfg80211.c- fix-build-failure-with-Linux-5.19-and-6.1.patch
deleted file mode 100644
index 785b8904b2..0000000000
--- a/package/wilc-driver/0003-cfg80211.c-fix-build-failure-with- Linux-5.19-and-6.1.patch
+++/dev/null(quoted diff) +0
-1@@ -1,98 +0,0 @@ -From a608cdd7903505217529317c04b5b58cb7e25081 Mon Sep 17 00:00:002001
package/wilc-driver/0003-cfg80211.c-fix-build-failure-with-Linux-5.19-and-6.1.patch deleted +0
-3-From: Giulio Benetti <[email protected]> -Date: Wed, 28 Dec 2022 21:06:43 +0100 -Subject: [PATCH] cfg80211.c: fix build failure with Linux 5.19 and6.1
package/wilc-driver/0003-cfg80211.c-fix-build-failure-with-Linux-5.19-and-6.1.patch deleted +0
-6- -Starting from Linux 5.19 stop_ap() requires unsigned int link_id as -parameter. Then from Linux 6.1 on lot of other cfg80211 APIs require -int link_id to deal with MLO, so let's add that parameter too. - -[Upstream status:https://github.com/embeddedTS/wilc3000-external-module/pull/2]
-Signed-off-by: Giulio Benetti <[email protected]>
----
-cfg80211.c| 35 +++++++++++++++++++++++++++++------
- 1 file changed, 29 insertions(+), 6 deletions(-)package/wilc-driver/0003-cfg80211.c-fix-build-failure-with-Linux-5.19-and-6.1.patch deleted +0
-6- -diff --git a/cfg80211.c b/cfg80211.c -index 41edd02..57c777d 100644 ---- a/cfg80211.c -+++ b/cfg80211.c -@@ -674,8 +674,12 @@ static int wilc_wfi_cfg_copy_wpa_info(struct
wilc_wfi_key*key_info,
- return 0;
- }
-
--static int add_key(struct wiphy *wiphy, structnet_device*netdev, u8key_index,
-- bool pairwise, const u8*mac_addr, structkey_params*params)
-+static int add_key(struct wiphy *wiphy, structnet_device*netdev, -+#if (LINUX_VERSION_CODE>=KERNEL_VERSION(6,1,0))
-+ intlink_id,
-+#endif
-+ u8 key_index, bool pairwise, const u8*mac_addr, -+ structkey_params*params)
-
- {
- int ret = 0, keylen =params->key_len, seqlen = params-Quoted 1 line
seq_len;-@@ -792,6 +796,9 @@ static int add_key(struct wiphy *wiphy, struct
net_device*netdev, u8key_index,
- }
-
- static int del_key(struct wiphy *wiphy, structnet_device*netdev, -+#if (LINUX_VERSION_CODE>=KERNEL_VERSION(6,1,0))
-+ intlink_id,
-+#endif
- u8key_index,
- bool pairwise,
- const u8*mac_addr)
-@@ -833,9 +840,13 @@ static int del_key(struct wiphy *wiphy, structnet_device*netdev,
- return ret;
- }
-
--static int get_key(struct wiphy *wiphy, structnet_device*netdev, u8key_index,
-- bool pairwise, const u8*mac_addr, void *cookie, -- void (*callback)(void *cookie, structkey_params*))
-+static int get_key(struct wiphy *wiphy, structnet_device*netdev, -+#if (LINUX_VERSION_CODE>=KERNEL_VERSION(6,1,0))
-+ intlink_id,
-+#endif
-+ u8key_index, bool pairwise, const u8*mac_addr, -+ void *cookie, void (*callback)(void *cookie, -+ structkey_params*))
- {
- structwilc_vif*vif =netdev_priv(netdev);
- structwilc_priv*priv =&vif->priv;
-@@ -877,12 +888,18 @@ static int get_key(struct wiphy *wiphy, structnet_device*netdev, u8key_index,
-
- /*wiphy_new()will WARN if not present*/
- static int set_default_key(struct wiphy *wiphy, structnet_device*netdev,
-+#if (LINUX_VERSION_CODE>=KERNEL_VERSION(6,1,0))
-+ intlink_id,
-+#endif
- u8key_index, bool unicast, bool multicast)
- {
- return 0;
- }
-
- static intset_default_mgmt_key(struct wiphy *wiphy,structnet_device*netdev,
-+#if (LINUX_VERSION_CODE>=KERNEL_VERSION(6,1,0))
-+ intlink_id,
-+#endif
- u8key_index)
- {
- return 0;
-@@ -1814,7 +1831,13 @@ static int change_beacon(struct wiphy *wiphy, structnet_device*dev,
- returnwilc_add_beacon(vif, 0, 0, beacon);
- }
-
--static intstop_ap(struct wiphy *wiphy, struct net_device *dev)-+static int stop_ap(struct wiphy *wiphy, structnet_device*dev -+#if (LINUX_VERSION_CODE>=KERNEL_VERSION(5,19,0))
-+ , unsigned intlink_id
-+#elif (LINUX_VERSION_CODE>=KERNEL_VERSION(6,1,0))
-+ , intlink_id
-+#endif
-+ )
- {
- int ret;
- structwilc_vif*vif =netdev_priv(dev);
---
-2.34.1(quoted diff) +0
-1-(quoted diff) +0
-0Linux-6.1-build-failur.patch b/package/wilc-driver/0004-Fix-struct- station_parameters-Linux-6.1-build-failur.patch
deleted file mode 100644
index faee805b5a..0000000000
--- a/package/wilc-driver/0004-Fix-struct-station_parameters-Linux- 6.1-build-failur.patch
+++/dev/null(quoted diff) +0
-1@@ -1,216 +0,0 @@ -From 5f022c4d3be32493d500be82f51032ef4fb3cdc0 Mon Sep 17 00:00:002001
package/wilc-driver/0004-Fix-struct-station_parameters-Linux-6.1-build-failur.patch deleted +0
-3-From: Giulio Benetti <[email protected]> -Date: Wed, 28 Dec 2022 21:08:45 +0100 -Subject: [PATCH] Fix struct station_parameters Linux 6.1 buildfailure
(quoted diff) +0
-2- -Starting from Linux 6.1 struct station_parameters has changed bymoving
-some member to its child structlink_station_parameters. Let's extract thepackage/wilc-driver/0004-Fix-struct-station_parameters-Linux-6.1-build-failur.patch deleted +0
-4-values of the needed members into local values at the beginning of -functions and substitute the member access with the local variables. - -[Upstream status:https://github.com/embeddedTS/wilc3000-external-module/pull/2]
-Signed-off-by: Giulio Benetti <[email protected]>
----
-cfg80211.c| 48 ++++++++++++++++++++++++++++++++----------------
- hif.c | 44 ++++++++++++++++++++++++++++++++------------
- 2 files changed, 64 insertions(+), 28 deletions(-)package/wilc-driver/0004-Fix-struct-station_parameters-Linux-6.1-build-failur.patch deleted +0
-6- -diff --git a/cfg80211.c b/cfg80211.c -index 57c777d..bdd480c 100644 ---- a/cfg80211.c -+++ b/cfg80211.c -@@ -1866,6 +1866,14 @@ static int add_station(struct wiphy *wiphy,struct
net_device*dev,
- structwilc_vif*vif =netdev_priv(dev);
- structwilc_priv*priv =&vif->priv;
- u8*assoc_bss= priv-Quoted 1 line
assoc_stainfo.sta_associated_bss[params->aid];
-+#if (
LINUX_VERSION_CODE>=KERNEL_VERSION(6, 1, 0)) -+ structlink_station_parameters*link_sta_params= ¶ms-Quoted 1 line
link_sta_params;-+ const struct
ieee80211_ht_cap*ht_capa= link_sta_params-Quoted 1 line
ht_capa;-+ u8
supported_rates_len= link_sta_params-Quoted 1 line
supported_rates_len;-+#else
-+ const structieee80211_ht_cap*ht_capa=params->ht_capa; -+ u8supported_rates_len=params->supported_rates_len; -+#endif
-
- if (vif->iftype==WILC_AP_MODE||vif->iftype==WILC_GO_MODE) {
- memcpy(assoc_bss, mac,ETH_ALEN);
-@@ -1879,27 +1887,27 @@ static int add_station(struct wiphy *wiphy, structnet_device*dev,
-params->aid);
- PRINT_INFO(vif->ndev,HOSTAPD_DBG,
- "Number of supported rates = %d\n", --params->supported_rates_len); -+supported_rates_len);
-
- PRINT_INFO(vif->ndev,CFG80211_DBG, "IS HT supported = %d\n",
-- (!params->ht_capa) ? false : true); -+ (!ht_capa) ? false : true);
-
-- if (params->ht_capa) {
-+ if (ht_capa) {
- PRINT_INFO(vif->ndev,CFG80211_DBG, - "Capability Info = %d\n", --params->ht_capa->cap_info); -+ht_capa->cap_info);
- PRINT_INFO(vif->ndev,CFG80211_DBG, - "AMPDU Params = %d\n", -- params->ht_capa-Quoted 1 line
ampdu_params_info);-+
ht_capa->ampdu_params_info); - PRINT_INFO(vif->ndev,CFG80211_DBG, - "HT Extended params= %d\n", -- params->ht_capa-Quoted 1 line
extended_ht_cap_info);-+
ht_capa->extended_ht_cap_info); - PRINT_INFO(vif->ndev,CFG80211_DBG, - "Tx Beamforming Cap= %d\n", --params->ht_capa->tx_BF_cap_info); -+ht_capa->tx_BF_cap_info); - PRINT_INFO(vif->ndev,CFG80211_DBG, - "Antenna selection info = %d\n", -- params->ht_capa-Quoted 1 line
antenna_selection_info);-+
ht_capa->antenna_selection_info); - }
-
- PRINT_INFO(vif->ndev,CFG80211_DBG, "Flag Mask = %d\n",
-@@ -1966,6 +1974,14 @@ static int change_station(struct wiphy *wiphy, structnet_device*dev,
- {
- int ret = 0;
- structwilc_vif*vif =netdev_priv(dev);
-+#if (LINUX_VERSION_CODE>=KERNEL_VERSION(6, 1, 0))
-+ structlink_station_parameters*link_sta_params= ¶ms-Quoted 1 line
link_sta_params;-+ const struct
ieee80211_ht_cap*ht_capa= link_sta_params-Quoted 1 line
ht_capa;-+ u8
supported_rates_len= link_sta_params-Quoted 1 line
supported_rates_len;-+#else
-+ const structieee80211_ht_cap*ht_capa=params->ht_capa; -+ u8supported_rates_len=params->supported_rates_len; -+#endif
-
- PRINT_D(vif->ndev,CFG80211_DBG, "Change station parameters\n");
-
-@@ -1976,25 +1992,25 @@ static int change_station(struct wiphy *wiphy, structnet_device*dev,
-params->aid);
- PRINT_INFO(vif->ndev,CFG80211_DBG,
- "Number of supported rates = %d\n", --params->supported_rates_len); -+supported_rates_len);
- PRINT_INFO(vif->ndev,CFG80211_DBG, "IS HT supported = %d\n",
-- (!params->ht_capa) ? false : true); -- if (params->ht_capa) {
-+ (!ht_capa) ? false : true);
-+ if (ht_capa) {
- PRINT_INFO(vif->ndev,CFG80211_DBG, - "Capability Info = %d\n", --params->ht_capa->cap_info); -+ht_capa->cap_info);
- PRINT_INFO(vif->ndev,CFG80211_DBG, - "AMPDU Params = %d\n", -- params->ht_capa-Quoted 1 line
ampdu_params_info);-+
ht_capa->ampdu_params_info); - PRINT_INFO(vif->ndev,CFG80211_DBG, - "HT Extended params= %d\n", -- params->ht_capa-Quoted 1 line
extended_ht_cap_info);-+
ht_capa->extended_ht_cap_info); - PRINT_INFO(vif->ndev,CFG80211_DBG, - "Tx Beamforming Cap= %d\n", --params->ht_capa->tx_BF_cap_info); -+ht_capa->tx_BF_cap_info); - PRINT_INFO(vif->ndev,CFG80211_DBG, - "Antenna selection info = %d\n", -- params->ht_capa-Quoted 1 line
antenna_selection_info);-+
ht_capa->antenna_selection_info); - }
- PRINT_INFO(vif->ndev,CFG80211_DBG, "Flag Mask = %d\n",
-params->sta_flags_mask);package/wilc-driver/0004-Fix-struct-station_parameters-Linux-6.1-build-failur.patch deleted +0
-5-diff --git a/hif.c b/hif.c -index 3f672a0..1a7365b 100644 ---- a/hif.c -+++ b/hif.c -@@ -2249,6 +2249,16 @@ int wilc_add_station(struct wilc_vif *vif,const u8 *mac,
- int result;
- structhost_if_msg*msg;
- structadd_sta_param*sta_params;
-+#if (LINUX_VERSION_CODE>=KERNEL_VERSION(6, 1, 0)) -+ structlink_station_parameters*link_sta_params= ¶ms-Quoted 1 line
link_sta_params;-+ const struct
ieee80211_ht_cap*ht_capa= link_sta_params-Quoted 1 line
ht_capa;-+ u8
supported_rates_len= link_sta_params-Quoted 1 line
supported_rates_len;-+ const u8
*supported_rates=link_sta_params->supported_rates; -+#else
-+ const structieee80211_ht_cap*ht_capa=params->ht_capa; -+ u8supported_rates_len=params->supported_rates_len; -+ const u8*supported_rates=params->supported_rates; -+#endif
-
- PRINT_INFO(vif->ndev,HOSTINF_DBG,
- "Setting adding station message queue params\n"); -@@ -2260,20 +2270,20 @@ int wilc_add_station(structwilc_vif*vif, const u8 *mac,
- sta_params =&msg->body.add_sta_info;
- memcpy(sta_params->bssid, mac,ETH_ALEN);
- sta_params->aid =params->aid;
-- if (!params->ht_capa) {
-+ if (!ht_capa) {
- sta_params->ht_supported = false;
- } else {
- sta_params->ht_supported = true;
-- memcpy(&sta_params->ht_capa,params->ht_capa, -+ memcpy(&sta_params->ht_capa,ht_capa,
-sizeof(struct ieee80211_ht_cap));
- }
- sta_params->flags_mask =params->sta_flags_mask;
- sta_params->flags_set =params->sta_flags_set;
-
-- sta_params->supported_rates_len = params-Quoted 1 line
supported_rates_len;-- if (
params->supported_rates_len> 0) {
-- sta_params->supported_rates = kmemdup(params-Quoted 1 line
supported_rates,-- params-
Quoted 1 line
supported_rates_len,-+ sta_params->supported_rates_len =
supported_rates_len; -+ if (supported_rates_len> 0) {
-+ sta_params->supported_rates = kmemdup(supported_rates,
-+supported_rates_len, -GFP_KERNEL); - if (!sta_params->supported_rates) {
- kfree(msg);
-@@ -2397,6 +2407,16 @@ int wilc_edit_station(structwilc_vif*vif, const u8 *mac,
- int result;
- structhost_if_msg*msg;
- structadd_sta_param*sta_params;
-+#if (LINUX_VERSION_CODE>=KERNEL_VERSION(6, 1, 0))
-+ structlink_station_parameters*link_sta_params= ¶ms-Quoted 1 line
link_sta_params;-+ const struct
ieee80211_ht_cap*ht_capa= link_sta_params-Quoted 1 line
ht_capa;-+ u8
supported_rates_len= link_sta_params-Quoted 1 line
supported_rates_len;-+ const u8
*supported_rates=link_sta_params->supported_rates; -+#else
-+ const structieee80211_ht_cap*ht_capa=params->ht_capa; -+ u8supported_rates_len=params->supported_rates_len; -+ const u8*supported_rates=params->supported_rates; -+#endif
-
- PRINT_INFO(vif->ndev,HOSTINF_DBG,
- "Setting editing station message queue params\n"); -@@ -2408,20 +2428,20 @@ int wilc_edit_station(structwilc_vif*vif, const u8 *mac,
- sta_params =&msg->body.edit_sta_info;
- memcpy(sta_params->bssid, mac,ETH_ALEN);
- sta_params->aid =params->aid;
-- if (!params->ht_capa) {
-+ if (!ht_capa) {
- sta_params->ht_supported = false;
- } else {
- sta_params->ht_supported = true;
-- memcpy(&sta_params->ht_capa,params->ht_capa, -+ memcpy(&sta_params->ht_capa,ht_capa,
-sizeof(struct ieee80211_ht_cap));
- }
- sta_params->flags_mask =params->sta_flags_mask;
- sta_params->flags_set =params->sta_flags_set;
-
-- sta_params->supported_rates_len = params-Quoted 1 line
supported_rates_len;-- if (
params->supported_rates_len> 0) {
-- sta_params->supported_rates = kmemdup(params-Quoted 1 line
supported_rates,-- params-
Quoted 1 line
supported_rates_len,-+ sta_params->supported_rates_len =
supported_rates_len; -+ if (supported_rates_len> 0) {
-+ sta_params->supported_rates = kmemdup(supported_rates,
-+supported_rates_len, -GFP_KERNEL); - if (!sta_params->supported_rates) {
- kfree(msg);
---
-2.34.1(quoted diff) +0
-1-package/wilc-driver/0005-Fix-cast-warnings.patch deleted +0
-1@@ -1,43 +0,0 @@ -From ebd083223883d479b2dd6f8a0da272797f90d236 Mon Sep 17 00:00:002001
package/wilc-driver/0005-Fix-cast-warnings.patch deleted +0
-5-From: Giulio Benetti <[email protected]> -Date: Sat, 31 Dec 2022 18:38:33 +0100 -Subject: [PATCH] Fix cast warnings - -Signed-off-by: Giulio Benetti<[email protected]>
----
-cfg80211.c| 2 +-
- netdev.c | 4 ++--
- 2 files changed, 3 insertions(+), 3 deletions(-)package/wilc-driver/0005-Fix-cast-warnings.patch deleted +0
-6- -diff --git a/cfg80211.c b/cfg80211.c -index 016aa06..2f40c9d 100644 ---- a/cfg80211.c -+++ b/cfg80211.c -@@ -1794,7 +1794,7 @@ static int start_ap(struct wiphy *wiphy,struct
net_device*dev,
- if (ret != 0)
- netdev_err(dev, "Error in setting channel\n"); -
-- wilc_wlan_set_bssid(dev,dev->dev_addr,WILC_AP_MODE); -+ wilc_wlan_set_bssid(dev, (u8 *)dev->dev_addr,WILC_AP_MODE); -
- return wilc_add_beacon(vif,settings->beacon_interval, -settings->dtim_period, &settings-Quoted 1 line
beacon);
package/wilc-driver/0005-Fix-cast-warnings.patch deleted +0
-5-diff --git a/netdev.c b/netdev.c -index 824afea..5a1a51d 100644 ---- a/netdev.c -+++ b/netdev.c -@@ -899,9 +899,9 @@ static int wilc_mac_open(struct net_device*ndev)
- vif->idx);
-
- if (is_valid_ether_addr(ndev->dev_addr))
-- wilc_set_mac_address(vif,ndev->dev_addr); -+ wilc_set_mac_address(vif, (u8 *)ndev->dev_addr); - else
-- wilc_get_mac_address(vif,ndev->dev_addr); -+ wilc_get_mac_address(vif, (u8 *)ndev->dev_addr); - netdev_dbg(ndev, "Mac address: %pM\n",ndev->dev_addr); -
- if (!is_valid_ether_addr(ndev->dev_addr)) {
---
-2.34.1package/wilc-driver/0005-Fix-cast-warnings.patch deleted +0
-1-package/wilc-driver/0006-Support-Linux-6.3.patch deleted +0
-1@@ -1,43 +0,0 @@ -From 14b5eccf4145e7a5afc8bc65a15f26ac691f98d8 Mon Sep 17 00:00:002001
package/wilc-driver/0006-Support-Linux-6.3.patch deleted +0
-6-From: Giulio Benetti <[email protected]> -Date: Wed, 27 Sep 2023 10:54:18 +0200 -Subject: [PATCH] Support Linux 6.3 - -With Linux 6.3 commit: -https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=40fc56ee608cdb20022c225ac6f1e4b7ba63f8f1
-functionof_get_named_gpio_flags()has been dropped but it was only a
-wrapper to callof_get_named_gpio()if the flags passed was NULL and thispackage/wilc-driver/0006-Support-Linux-6.3.patch deleted +0
-5-is the case. So let's use of_get_named_gpio() in place of -of_get_named_gpio_flags() since of_get_named_gpio() never changed -after its adding in Linux version 3.1. - -Upstream:https://github.com/embeddedTS/wilc3000-external-module/pull/4
package/wilc-driver/0006-Support-Linux-6.3.patch deleted +0
-2- -Signed-off-by: Giulio Benetti<[email protected]>
----
-power.c| 6 ++----
- 1 file changed, 2 insertions(+), 4 deletions(-)package/wilc-driver/0006-Support-Linux-6.3.patch deleted +0
-10- -diff --git a/power.c b/power.c -index 6c59e0b..6ab8d63 100644 ---- a/power.c -+++ b/power.c -@@ -25,13 +25,11 @@ int wilc_of_parse_power_pins(struct wilc *wilc) - const struct wilc_power_gpios *gpios = &default_gpios[0]; - int ret; - -- power->gpios.reset = of_get_named_gpio_flags(of, "reset-gpios", 0,
-- NULL); -+ power->gpios.reset =of_get_named_gpio(of, "reset-gpios", 0); - if (!gpio_is_valid(power->gpios.reset))
- power->gpios.reset =gpios->reset;
-
-- power->gpios.chip_en = of_get_named_gpio_flags(of, "chip_en- gpios", 0,
-- NULL); -+ power->gpios.chip_en =of_get_named_gpio(of, "chip_en-gpios", 0);
- if (!gpio_is_valid(power->gpios.chip_en))
- power->gpios.chip_en =gpios->chip_en;
-
---
-2.34.1package/wilc-driver/0006-Support-Linux-6.3.patch deleted +0
-1-package/wilc-driver/0007-Support-Linux-6.4.patch deleted +0
-1@@ -1,36 +0,0 @@ -From 94fc4594659494b8c5cbdf1a719aea4d66d3398d Mon Sep 17 00:00:002001
package/wilc-driver/0007-Support-Linux-6.4.patch deleted +0
-6-From: Giulio Benetti <[email protected]> -Date: Wed, 27 Sep 2023 11:20:50 +0200 -Subject: [PATCH] Support Linux 6.4 - -With Linux 6.4 commit: -https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=1aaba11da9aa7d7d6b52a74d45b31cac118295a1
-class_create() doesn't require first argumentTHIS_MODULEanymore so let'spackage/wilc-driver/0007-Support-Linux-6.4.patch deleted +0
-3-drop first argument if Linux version >= 6.4 - -Upstream:https://github.com/embeddedTS/wilc3000-external-module/pull/5
package/wilc-driver/0007-Support-Linux-6.4.patch deleted +0
-2- -Signed-off-by: Giulio Benetti<[email protected]>
----
-bt.c| 4 ++++
- 1 file changed, 4 insertions(+)package/wilc-driver/0007-Support-Linux-6.4.patch deleted +0
-20- -diff --git a/bt.c b/bt.c -index 48a5302..a752457 100644 ---- a/bt.c -+++ b/bt.c -@@ -135,7 +135,11 @@ static void wilc_bt_create_device(void) - ret = alloc_chrdev_region(&chc_dev_no, 0, 1, "atmel"); - if (ret < 0) - return; -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(6, 4, 0) -+ chc_dev_class = class_create("atmel"); -+#else - chc_dev_class = class_create(THIS_MODULE, "atmel"); -+#endif - if (IS_ERR(chc_dev_class)) { - unregister_chrdev_region(chc_dev_no, 1); - return; --- -2.34.1 -package/wilc- renamed from package/wilc-driver/wilc-driver.hash +0
-0driver/wilc-driver.hash
index4ada813ed8..43e004068c100644package/wilc-driver/wilc-driver.hash +0
-1@@ -1,3 +1,3 @@ # Locally calculated -sha256
4796b1a53781f8702a335b0146d488a9422b71dab39f6f154f955b0ad1711199wilc-driver-linux4microchip-2021.10-1.tar.gz
+sha25666e9d889a5dbfad91c74f52df497d9ef9e353559231e4bc251136422bfc0cc00wilc-driver-linux4microchip-2024.04.tar.gz
sha256f6b78c087c3ebdf0f3c13415070dd480a3f35d8fc76f3d02180a407c1c812f79LICENSEpackage/wilc- renamed from package/wilc-driver/wilc-driver.mk +0
-0
driver/wilc-driver.mk
indexa7a902b6db..7879b88c58100644package/wilc-driver/wilc-driver.mk +0
-0@@ -4,7 +4,7 @@ # #################################################################### ############package/wilc-driver/wilc-driver.mk +1
-1-WILC_DRIVER_VERSION = linux4microchip-2021.10-1 +WILC_DRIVER_VERSION = linux4microchip-2024.04
Quoted 4 lines
WILC_DRIVER_SITE = $(call github,embeddedTS,wilc3000-external- module,$(WILC_DRIVER_VERSION))
WILC_DRIVER_LICENSE = GPL-2.0
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
Quoted 11 lines
Il giorno 15 lug 2024, alle ore 20:25, Kris Bahnsen <[email protected]> ha scritto:
Quoted 2 lines · Giulio Benetti
This driver supports up to Linux version 6.6. Let's also drop local patches.
Be advised that this does NOT support "up to" Linux 6.6. The latest updates from Microchip drop any backwards compatibility support, which is why we have not pushed this up to Buildroot yet.
Quoted 7 lines
I think this only will support kernels 6.2~6.6 and currently do not believe it will compile against upstream Linux 6.9 (I tested it a while ago but don't remember the outcome as it wasn't important).
As I mentioned in my previous email responding to build failures, we're working on a solution to be able to handle backwards compatibility with 'backports' but are first catching up on other tasks.
Pardon, I’ve misread.
Best regards
Giulio
Quoted 718 lines
Quoted 718 lines
Signed-off-by Giulio Benetti <[email protected]>--- ...missing-prandom_u32-with-Linux-6.1.0.patch | 34 --- ...fix-build-failure-on-remove-callback.patch | 44 ---- ...uild-failure-with-Linux-5.19-and-6.1.patch | 98 -------- ...on_parameters-Linux-6.1-build-failur.patch | 216 ---------------- -- .../wilc-driver/0005-Fix-cast-warnings.patch | 43 ---- .../wilc-driver/0006-Support-Linux-6.3.patch | 43 ---- .../wilc-driver/0007-Support-Linux-6.4.patch | 36 --- package/wilc-driver/wilc-driver.hash | 2 +- package/wilc-driver/wilc-driver.mk | 2 +- 9 files changed, 2 insertions(+), 516 deletions(-) delete mode 100644 package/wilc-driver/0001-cfg80211.c-fix-missing- prandom_u32-with-Linux-6.1.0.patch delete mode 100644 package/wilc-driver/0002-spi.c-fix-build-failure- on-remove-callback.patch delete mode 100644 package/wilc-driver/0003-cfg80211.c-fix-build- failure-with-Linux-5.19-and-6.1.patch delete mode 100644 package/wilc-driver/0004-Fix-struct- station_parameters-Linux-6.1-build-failur.patch delete mode 100644 package/wilc-driver/0005-Fix-cast-warnings.patch delete mode 100644 package/wilc-driver/0006-Support-Linux-6.3.patch delete mode 100644 package/wilc-driver/0007-Support-Linux-6.4.patch(quoted diff) +0
-0prandom_u32-with-Linux-6.1.0.patch b/package/wilc-driver/0001- cfg80211.c-fix-missing-prandom_u32-with-Linux-6.1.0.patch deleted file mode 100644
index 2f10627301..0000000000
--- a/package/wilc-driver/0001-cfg80211.c-fix-missing-prandom_u32- with-Linux-6.1.0.patch
+++/dev/null(quoted diff) +0
-1@@ -1,34 +0,0 @@ -From f80e4343fa0a4d8b22933d1704c85a771fe234a4 Mon Sep 17 00:00:002001
package/wilc-driver/0001-cfg80211.c-fix-missing-prandom_u32-with-Linux-6.1.0.patch deleted +0
-3-From: Giulio Benetti <[email protected]> -Date: Wed, 28 Dec 2022 19:56:46 +0100 -Subject: [PATCH] cfg80211.c: fix missing prandom_u32() with Linux >=6.1.0
(quoted diff) +0
-2- -prandom_u32() previously was only calling get_random_u32() so it'sbeen
-dropped with Linux 6.1.0. So let's directly callget_random_u32()if Linuxpackage/wilc-driver/0001-cfg80211.c-fix-missing-prandom_u32-with-Linux-6.1.0.patch deleted +0
-3-version >= 6.1.0. - -[Upstream status:https://github.com/embeddedTS/wilc3000-external-module/pull/2]
-Signed-off-by: Giulio Benetti
<[email protected]>
----
-cfg80211.c| 4 ++++
- 1 file changed, 4 insertions(+)package/wilc-driver/0001-cfg80211.c-fix-missing-prandom_u32-with-Linux-6.1.0.patch deleted +0
-20- -diff --git a/cfg80211.c b/cfg80211.c -index 016aa06..41edd02 100644 ---- a/cfg80211.c -+++ b/cfg80211.c -@@ -1422,7 +1422,11 @@ static int mgmt_tx(struct wiphy *wiphy, - const u8 *vendor_ie; - int ret = 0; - -+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(6, 1, 0)) -+ *cookie = get_random_u32(); -+#else - *cookie = prandom_u32(); -+#endif - priv->tx_cookie = *cookie; - mgmt = (const struct ieee80211_mgmt *)buf; - --- -2.34.1 -(quoted diff) +0
-0remove-callback.patch b/package/wilc-driver/0002-spi.c-fix-build- failure-on-remove-callback.patch
deleted file mode 100644
index 87306dfa12..0000000000
--- a/package/wilc-driver/0002-spi.c-fix-build-failure-on-remove- callback.patch
+++/dev/null(quoted diff) +0
-1@@ -1,44 +0,0 @@ -From a88819bd63f977b5a33d72a2b9e264ce104726bd Mon Sep 17 00:00:002001
package/wilc-driver/0002-spi.c-fix-build-failure-on-remove-callback.patch deleted +0
-5-From: Giulio Benetti <[email protected]> -Date: Wed, 28 Dec 2022 21:02:12 +0100 -Subject: [PATCH] spi.c: fix build failure on remove callback - -Starting from Linux 5.18 remove callback returns void, so let's dealwith
package/wilc-driver/0002-spi.c-fix-build-failure-on-remove-callback.patch deleted +0
-3-it depending on Linux version >= 5.18. - -[Upstream status:https://github.com/embeddedTS/wilc3000-external-module/pull/2]
-Signed-off-by: Giulio Benetti
<[email protected]>
----
-spi.c| 7 +++++++
- 1 file changed, 7 insertions(+)package/wilc-driver/0002-spi.c-fix-build-failure-on-remove-callback.patch deleted +0
-18- -diff --git a/spi.c b/spi.c -index 96c51fe..f7b43e2 100644 ---- a/spi.c -+++ b/spi.c -@@ -211,7 +211,11 @@ free: - return ret; - } - -+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(5,18,0)) -+static void wilc_bus_remove(struct spi_device *spi) -+#else - static int wilc_bus_remove(struct spi_device *spi) -+#endif - { - struct wilc *wilc = spi_get_drvdata(spi); - -@@ -220,7 +224,10 @@ static int wilc_bus_remove(struct spi_device*spi)
package/wilc-driver/0002-spi.c-fix-build-failure-on-remove-callback.patch deleted +0
-13- - wilc_netdev_cleanup(wilc); - wilc_bt_deinit(); -+ -+#if (LINUX_VERSION_CODE < KERNEL_VERSION(5,18,0)) - return 0; -+#endif - } - - static int wilc_spi_suspend(struct device *dev) --- -2.34.1 -(quoted diff) +0
-0with-Linux-5.19-and-6.1.patch b/package/wilc-driver/0003-cfg80211.c- fix-build-failure-with-Linux-5.19-and-6.1.patch
deleted file mode 100644
index 785b8904b2..0000000000
--- a/package/wilc-driver/0003-cfg80211.c-fix-build-failure-with- Linux-5.19-and-6.1.patch
+++/dev/null(quoted diff) +0
-1@@ -1,98 +0,0 @@ -From a608cdd7903505217529317c04b5b58cb7e25081 Mon Sep 17 00:00:002001
package/wilc-driver/0003-cfg80211.c-fix-build-failure-with-Linux-5.19-and-6.1.patch deleted +0
-3-From: Giulio Benetti <[email protected]> -Date: Wed, 28 Dec 2022 21:06:43 +0100 -Subject: [PATCH] cfg80211.c: fix build failure with Linux 5.19 and6.1
package/wilc-driver/0003-cfg80211.c-fix-build-failure-with-Linux-5.19-and-6.1.patch deleted +0
-6- -Starting from Linux 5.19 stop_ap() requires unsigned int link_id as -parameter. Then from Linux 6.1 on lot of other cfg80211 APIs require -int link_id to deal with MLO, so let's add that parameter too. - -[Upstream status:https://github.com/embeddedTS/wilc3000-external-module/pull/2]
-Signed-off-by: Giulio Benetti <[email protected]>
----
-cfg80211.c| 35 +++++++++++++++++++++++++++++------
- 1 file changed, 29 insertions(+), 6 deletions(-)package/wilc-driver/0003-cfg80211.c-fix-build-failure-with-Linux-5.19-and-6.1.patch deleted +0
-6- -diff --git a/cfg80211.c b/cfg80211.c -index 41edd02..57c777d 100644 ---- a/cfg80211.c -+++ b/cfg80211.c -@@ -674,8 +674,12 @@ static int wilc_wfi_cfg_copy_wpa_info(struct
wilc_wfi_key*key_info,package/wilc-driver/0002-spi.c-fix-build-failure-on-remove-callback.patch deleted +0
-4- return 0; - } - --static int add_key(struct wiphy *wiphy, struct net_device *netdev,u8
key_index,
-- bool pairwise, const u8*mac_addr, structkey_params*params)
-+static int add_key(struct wiphy *wiphy, structnet_device*netdev, -+#if (LINUX_VERSION_CODE>=KERNEL_VERSION(6,1,0))
-+ intlink_id,
-+#endif
-+ u8key_index, bool pairwise, const u8*mac_addr,
-+ structkey_params*params)package/wilc-driver/0002-spi.c-fix-build-failure-on-remove-callback.patch deleted +0
-3- - { - int ret = 0, keylen = params->key_len, seqlen = params-Quoted 1 line
seq_len;-@@ -792,6 +796,9 @@ static int add_key(struct wiphy *wiphy, struct
net_device*netdev, u8key_index,
- }package/wilc-driver/0003-cfg80211.c-fix-build-failure-with-Linux-5.19-and-6.1.patch deleted +0
-9- - static int del_key(struct wiphy *wiphy, struct net_device *netdev, -+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(6,1,0)) -+ int link_id, -+#endif - u8 key_index, - bool pairwise, - const u8 *mac_addr) -@@ -833,9 +840,13 @@ static int del_key(struct wiphy *wiphy, struct
net_device*netdev,package/wilc-driver/0002-spi.c-fix-build-failure-on-remove-callback.patch deleted +0
-4- return ret; - } - --static int get_key(struct wiphy *wiphy, struct net_device *netdev,u8
key_index,
-- bool pairwise, const u8*mac_addr, void *cookie,
-- void (*callback)(void *cookie, structkey_params
*))
-+static int get_key(struct wiphy *wiphy, structnet_device*netdev, -+#if (LINUX_VERSION_CODE>=KERNEL_VERSION(6,1,0))
-+ intlink_id,
-+#endif-+ u8 key_index, bool pairwise, const u8 *mac_addr, -+ void *cookie, void (*callback)(void *cookie, -+ struct key_params *))- {
package/wilc-driver/0003-cfg80211.c-fix-build-failure-with-Linux-5.19-and-6.1.patch deleted +0
-3- struct wilc_vif *vif = netdev_priv(netdev); - struct wilc_priv *priv = &vif->priv; -@@ -877,12 +888,18 @@ static int get_key(struct wiphy *wiphy, struct
net_device*netdev, u8key_index,
-
- /*wiphy_new()will WARN if not present*/
- static int set_default_key(struct wiphy *wiphy, structnet_device*netdev,
-+#if (LINUX_VERSION_CODE>=KERNEL_VERSION(6,1,0))
-+ intlink_id,
-+#endif
- u8key_index, bool unicast, bool
multicast)
- {package/wilc-driver/0002-spi.c-fix-build-failure-on-remove-callback.patch deleted +0
-4- return 0; - } - - static int set_default_mgmt_key (struct wiphy *wiphy,struct
net_device*netdev,
-+#if (LINUX_VERSION_CODE>=KERNEL_VERSION(6,1,0))
-+ intlink_id,
-+#endifpackage/wilc-driver/0003-cfg80211.c-fix-build-failure-with-Linux-5.19-and-6.1.patch deleted +0
-4- u8 key_index) - { - return 0; -@@ -1814,7 +1831,13 @@ static int change_beacon(struct wiphy *wiphy,struct
net_device*dev,package/wilc-driver/0003-cfg80211.c-fix-build-failure-with-Linux-5.19-and-6.1.patch deleted +0
-17- return wilc_add_beacon(vif, 0, 0, beacon); - } - --static int stop_ap(struct wiphy *wiphy, struct net_device *dev) -+static int stop_ap(struct wiphy *wiphy, struct net_device *dev -+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(5,19,0)) -+ , unsigned int link_id -+#elif (LINUX_VERSION_CODE >= KERNEL_VERSION(6,1,0)) -+ , int link_id -+#endif -+ ) - { - int ret; - struct wilc_vif *vif = netdev_priv(dev); --- -2.34.1 -(quoted diff) +0
-0Linux-6.1-build-failur.patch b/package/wilc-driver/0004-Fix-struct- station_parameters-Linux-6.1-build-failur.patch
deleted file mode 100644
index faee805b5a..0000000000
--- a/package/wilc-driver/0004-Fix-struct-station_parameters-Linux- 6.1-build-failur.patch
+++/dev/null(quoted diff) +0
-1@@ -1,216 +0,0 @@ -From 5f022c4d3be32493d500be82f51032ef4fb3cdc0 Mon Sep 17 00:00:002001
package/wilc-driver/0004-Fix-struct-station_parameters-Linux-6.1-build-failur.patch deleted +0
-3-From: Giulio Benetti <[email protected]> -Date: Wed, 28 Dec 2022 21:08:45 +0100 -Subject: [PATCH] Fix struct station_parameters Linux 6.1 buildfailure
(quoted diff) +0
-2- -Starting from Linux 6.1 struct station_parameters has changed bymoving
-some member to its child structlink_station_parameters. Let's extract thepackage/wilc-driver/0004-Fix-struct-station_parameters-Linux-6.1-build-failur.patch deleted +0
-4-values of the needed members into local values at the beginning of -functions and substitute the member access with the local variables. - -[Upstream status:https://github.com/embeddedTS/wilc3000-external-module/pull/2]
-Signed-off-by: Giulio Benetti <[email protected]>
----
-cfg80211.c| 48 ++++++++++++++++++++++++++++++++----------------
-hif.c| 44 ++++++++++++++++++++++++++++++++------------
- 2 files changed, 64 insertions(+), 28 deletions(-)package/wilc-driver/0004-Fix-struct-station_parameters-Linux-6.1-build-failur.patch deleted +0
-6- -diff --git a/cfg80211.c b/cfg80211.c -index 57c777d..bdd480c 100644 ---- a/cfg80211.c -+++ b/cfg80211.c -@@ -1866,6 +1866,14 @@ static int add_station(struct wiphy *wiphy,struct
net_device*dev,package/wilc-driver/0004-Fix-struct-station_parameters-Linux-6.1-build-failur.patch deleted +0
-3- struct wilc_vif *vif = netdev_priv(dev); - struct wilc_priv *priv = &vif->priv; - u8 *assoc_bss = priv-Quoted 1 line
assoc_stainfo.sta_associated_bss[params->aid];
-+#if (
LINUX_VERSION_CODE>=KERNEL_VERSION(6, 1, 0))
-+ structlink_station_parameters*link_sta_params= ¶ms-Quoted 1 line
link_sta_params;-+ const struct
ieee80211_ht_cap*ht_capa= link_sta_params-Quoted 1 line
ht_capa;-+ u8
supported_rates_len= link_sta_params-Quoted 1 line
supported_rates_len;-+#else
-+ const structieee80211_ht_cap*ht_capa=params->ht_capa;
-+ u8supported_rates_len=params->supported_rates_len;
-+#endif(quoted diff) +0
-2- - if (vif->iftype == WILC_AP_MODE || vif->iftype ==
WILC_GO_MODE) {
-memcpy(assoc_bss, mac, ETH_ALEN);
-@@ -1879,27 +1887,27 @@ static int add_station(struct wiphy *wiphy, structnet_device*dev,package/wilc-driver/0004-Fix-struct-station_parameters-Linux-6.1-build-failur.patch deleted +0
-7- params->aid); - PRINT_INFO(vif->ndev, HOSTAPD_DBG, - "Number of supported rates = %d\n", -- params->supported_rates_len); -+ supported_rates_len); - - PRINT_INFO(vif->ndev, CFG80211_DBG, "IS HT supported= %d\n",
-- (!params->ht_capa) ? false : true);
-+ (!ht_capa) ? false : true);package/wilc-driver/0004-Fix-struct-station_parameters-Linux-6.1-build-failur.patch deleted +0
-10- -- if (params->ht_capa) { -+ if (ht_capa) { - PRINT_INFO(vif->ndev, CFG80211_DBG, - "Capability Info = %d\n", -- params->ht_capa->cap_info); -+ ht_capa->cap_info); - PRINT_INFO(vif->ndev, CFG80211_DBG, - "AMPDU Params = %d\n", -- params->ht_capa-Quoted 1 line
ampdu_params_info);-+
ht_capa->ampdu_params_info);package/wilc-driver/0004-Fix-struct-station_parameters-Linux-6.1-build-failur.patch deleted +0
-3- PRINT_INFO(vif->ndev, CFG80211_DBG, - "HT Extended params= %d\n", -- params->ht_capa-Quoted 1 line
extended_ht_cap_info);-+
ht_capa->extended_ht_cap_info);package/wilc-driver/0004-Fix-struct-station_parameters-Linux-6.1-build-failur.patch deleted +0
-7- PRINT_INFO(vif->ndev, CFG80211_DBG, - "Tx Beamforming Cap= %d\n", -- params->ht_capa->tx_BF_cap_info); -+ ht_capa->tx_BF_cap_info); - PRINT_INFO(vif->ndev, CFG80211_DBG, - "Antenna selection info = %d\n", -- params->ht_capa-Quoted 1 line
antenna_selection_info);-+
ht_capa->antenna_selection_info);package/wilc-driver/0002-spi.c-fix-build-failure-on-remove-callback.patch deleted +0
-3- } - - PRINT_INFO(vif->ndev, CFG80211_DBG, "Flag Mask =%d\n",
-@@ -1966,6 +1974,14 @@ static int change_station(struct wiphy *wiphy, structnet_device*dev,
- {package/wilc-driver/0004-Fix-struct-station_parameters-Linux-6.1-build-failur.patch deleted +0
-4- int ret = 0; - struct wilc_vif *vif = netdev_priv(dev); -+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(6, 1, 0)) -+ struct link_station_parameters *link_sta_params = ¶ms-Quoted 1 line
link_sta_params;-+ const struct
ieee80211_ht_cap*ht_capa= link_sta_params-Quoted 1 line
ht_capa;-+ u8
supported_rates_len= link_sta_params-Quoted 1 line
supported_rates_len;-+#else
-+ const structieee80211_ht_cap*ht_capa=params->ht_capa;
-+ u8supported_rates_len=params->supported_rates_len;
-+#endif(quoted diff) +0
-2- - PRINT_D(vif->ndev, CFG80211_DBG, "Change stationparameters\n");
-
-@@ -1976,25 +1992,25 @@ static int change_station(struct wiphy *wiphy, structnet_device*dev,package/wilc-driver/0004-Fix-struct-station_parameters-Linux-6.1-build-failur.patch deleted +0
-6- params->aid); - PRINT_INFO(vif->ndev, CFG80211_DBG, - "Number of supported rates = %d\n", -- params->supported_rates_len); -+ supported_rates_len); - PRINT_INFO(vif->ndev, CFG80211_DBG, "IS HT supported= %d\n",
-- (!params->ht_capa) ? false : true);
-- if (params->ht_capa) {
-+ (!ht_capa) ? false : true);
-+ if (ht_capa) {package/wilc-driver/0004-Fix-struct-station_parameters-Linux-6.1-build-failur.patch deleted +0
-7- PRINT_INFO(vif->ndev, CFG80211_DBG, - "Capability Info = %d\n", -- params->ht_capa->cap_info); -+ ht_capa->cap_info); - PRINT_INFO(vif->ndev, CFG80211_DBG, - "AMPDU Params = %d\n", -- params->ht_capa-Quoted 1 line
ampdu_params_info);-+
ht_capa->ampdu_params_info);package/wilc-driver/0004-Fix-struct-station_parameters-Linux-6.1-build-failur.patch deleted +0
-3- PRINT_INFO(vif->ndev, CFG80211_DBG, - "HT Extended params= %d\n", -- params->ht_capa-Quoted 1 line
extended_ht_cap_info);-+
ht_capa->extended_ht_cap_info);package/wilc-driver/0004-Fix-struct-station_parameters-Linux-6.1-build-failur.patch deleted +0
-7- PRINT_INFO(vif->ndev, CFG80211_DBG, - "Tx Beamforming Cap= %d\n", -- params->ht_capa->tx_BF_cap_info); -+ ht_capa->tx_BF_cap_info); - PRINT_INFO(vif->ndev, CFG80211_DBG, - "Antenna selection info = %d\n", -- params->ht_capa-Quoted 1 line
antenna_selection_info);-+
ht_capa->antenna_selection_info);(quoted diff) +0
-2- } - PRINT_INFO(vif->ndev, CFG80211_DBG, "Flag Mask =%d\n",
package/wilc-driver/0004-Fix-struct-station_parameters-Linux-6.1-build-failur.patch deleted +0
-6- params->sta_flags_mask); -diff --git a/hif.c b/hif.c -index 3f672a0..1a7365b 100644 ---- a/hif.c -+++ b/hif.c -@@ -2249,6 +2249,16 @@ int wilc_add_station(struct wilc_vif *vif,const u8 *mac,
package/wilc-driver/0004-Fix-struct-station_parameters-Linux-6.1-build-failur.patch deleted +0
-5- int result; - struct host_if_msg *msg; - struct add_sta_param *sta_params; -+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(6, 1, 0)) -+ struct link_station_parameters *link_sta_params = ¶ms-Quoted 1 line
link_sta_params;-+ const struct
ieee80211_ht_cap*ht_capa= link_sta_params-Quoted 1 line
ht_capa;-+ u8
supported_rates_len= link_sta_params-Quoted 1 line
supported_rates_len;-+ const u8
*supported_rates=link_sta_params->supported_rates;
-+#else-+ const struct ieee80211_ht_cap *ht_capa = params->ht_capa; -+ u8 supported_rates_len = params->supported_rates_len; -+ const u8 *supported_rates = params->supported_rates;-+#endif
package/wilc-driver/0004-Fix-struct-station_parameters-Linux-6.1-build-failur.patch deleted +0
-4- - PRINT_INFO(vif->ndev, HOSTINF_DBG, - "Setting adding station message queue params\n"); -@@ -2260,20 +2270,20 @@ int wilc_add_station(struct wilc_vif *vif,const u8 *mac,
package/wilc-driver/0004-Fix-struct-station_parameters-Linux-6.1-build-failur.patch deleted +0
-16- sta_params = &msg->body.add_sta_info; - memcpy(sta_params->bssid, mac, ETH_ALEN); - sta_params->aid = params->aid; -- if (!params->ht_capa) { -+ if (!ht_capa) { - sta_params->ht_supported = false; - } else { - sta_params->ht_supported = true; -- memcpy(&sta_params->ht_capa, params->ht_capa, -+ memcpy(&sta_params->ht_capa, ht_capa, - sizeof(struct ieee80211_ht_cap)); - } - sta_params->flags_mask = params->sta_flags_mask; - sta_params->flags_set = params->sta_flags_set; - -- sta_params->supported_rates_len = params-Quoted 1 line
supported_rates_len;-- if (
params->supported_rates_len> 0) {
--sta_params->supported_rates= kmemdup(params-Quoted 1 line
supported_rates,-- params-
Quoted 1 line
supported_rates_len,-+
sta_params->supported_rates_len=supported_rates_len;
-+ if (supported_rates_len> 0) {
-+sta_params->supported_rates=
kmemdup(supported_rates,
-+supported_rates_len,package/wilc-driver/0004-Fix-struct-station_parameters-Linux-6.1-build-failur.patch deleted +0
-4- GFP_KERNEL); - if (!sta_params->supported_rates) { - kfree(msg); -@@ -2397,6 +2407,16 @@ int wilc_edit_station(struct wilc_vif *vif,const u8 *mac,
package/wilc-driver/0004-Fix-struct-station_parameters-Linux-6.1-build-failur.patch deleted +0
-5- int result; - struct host_if_msg *msg; - struct add_sta_param *sta_params; -+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(6, 1, 0)) -+ struct link_station_parameters *link_sta_params = ¶ms-Quoted 1 line
link_sta_params;-+ const struct
ieee80211_ht_cap*ht_capa= link_sta_params-Quoted 1 line
ht_capa;-+ u8
supported_rates_len= link_sta_params-Quoted 1 line
supported_rates_len;-+ const u8
*supported_rates=link_sta_params->supported_rates;
-+#else-+ const struct ieee80211_ht_cap *ht_capa = params->ht_capa; -+ u8 supported_rates_len = params->supported_rates_len; -+ const u8 *supported_rates = params->supported_rates;-+#endif
package/wilc-driver/0004-Fix-struct-station_parameters-Linux-6.1-build-failur.patch deleted +0
-4- - PRINT_INFO(vif->ndev, HOSTINF_DBG, - "Setting editing station message queue params\n"); -@@ -2408,20 +2428,20 @@ int wilc_edit_station(struct wilc_vif *vif,const u8 *mac,
package/wilc-driver/0004-Fix-struct-station_parameters-Linux-6.1-build-failur.patch deleted +0
-16- sta_params = &msg->body.edit_sta_info; - memcpy(sta_params->bssid, mac, ETH_ALEN); - sta_params->aid = params->aid; -- if (!params->ht_capa) { -+ if (!ht_capa) { - sta_params->ht_supported = false; - } else { - sta_params->ht_supported = true; -- memcpy(&sta_params->ht_capa, params->ht_capa, -+ memcpy(&sta_params->ht_capa, ht_capa, - sizeof(struct ieee80211_ht_cap)); - } - sta_params->flags_mask = params->sta_flags_mask; - sta_params->flags_set = params->sta_flags_set; - -- sta_params->supported_rates_len = params-Quoted 1 line
supported_rates_len;-- if (
params->supported_rates_len> 0) {
--sta_params->supported_rates= kmemdup(params-Quoted 1 line
supported_rates,-- params-
Quoted 1 line
supported_rates_len,-+
sta_params->supported_rates_len=supported_rates_len;
-+ if (supported_rates_len> 0) {
-+sta_params->supported_rates=
kmemdup(supported_rates,
-+supported_rates_len,package/wilc-driver/0004-Fix-struct-station_parameters-Linux-6.1-build-failur.patch deleted +0
-6- GFP_KERNEL); - if (!sta_params->supported_rates) { - kfree(msg); --- -2.34.1 -package/wilc-driver/0005-Fix-cast-warnings.patch deleted +0
-1@@ -1,43 +0,0 @@ -From ebd083223883d479b2dd6f8a0da272797f90d236 Mon Sep 17 00:00:002001
package/wilc-driver/0005-Fix-cast-warnings.patch deleted +0
-5-From: Giulio Benetti <[email protected]> -Date: Sat, 31 Dec 2022 18:38:33 +0100 -Subject: [PATCH] Fix cast warnings - -Signed-off-by: Giulio Benetti<[email protected]>
----
-cfg80211.c| 2 +-
-netdev.c| 4 ++--
- 2 files changed, 3 insertions(+), 3 deletions(-)package/wilc-driver/0005-Fix-cast-warnings.patch deleted +0
-6- -diff --git a/cfg80211.c b/cfg80211.c -index 016aa06..2f40c9d 100644 ---- a/cfg80211.c -+++ b/cfg80211.c -@@ -1794,7 +1794,7 @@ static int start_ap(struct wiphy *wiphy,struct
net_device*dev,package/wilc-driver/0005-Fix-cast-warnings.patch deleted +0
-8- if (ret != 0) - netdev_err(dev, "Error in setting channel\n"); - -- wilc_wlan_set_bssid(dev, dev->dev_addr, WILC_AP_MODE); -+ wilc_wlan_set_bssid(dev, (u8 *)dev->dev_addr, WILC_AP_MODE); - - return wilc_add_beacon(vif, settings->beacon_interval, - settings->dtim_period, &settings-Quoted 1 line
beacon);
package/wilc-driver/0005-Fix-cast-warnings.patch deleted +0
-5-diff --git a/netdev.c b/netdev.c -index 824afea..5a1a51d 100644 ---- a/netdev.c -+++ b/netdev.c -@@ -899,9 +899,9 @@ static int wilc_mac_open(struct net_device*ndev)
package/wilc-driver/0005-Fix-cast-warnings.patch deleted +0
-14- vif->idx); - - if (is_valid_ether_addr(ndev->dev_addr)) -- wilc_set_mac_address(vif, ndev->dev_addr); -+ wilc_set_mac_address(vif, (u8 *)ndev->dev_addr); - else -- wilc_get_mac_address(vif, ndev->dev_addr); -+ wilc_get_mac_address(vif, (u8 *)ndev->dev_addr); - netdev_dbg(ndev, "Mac address: %pM\n", ndev->dev_addr); - - if (!is_valid_ether_addr(ndev->dev_addr)) { --- -2.34.1 -package/wilc-driver/0006-Support-Linux-6.3.patch deleted +0
-1@@ -1,43 +0,0 @@ -From 14b5eccf4145e7a5afc8bc65a15f26ac691f98d8 Mon Sep 17 00:00:002001
package/wilc-driver/0006-Support-Linux-6.3.patch deleted +0
-6-From: Giulio Benetti <[email protected]> -Date: Wed, 27 Sep 2023 10:54:18 +0200 -Subject: [PATCH] Support Linux 6.3 - -With Linux 6.3 commit: -https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=40fc56ee608cdb20022c225ac6f1e4b7ba63f8f1
-functionof_get_named_gpio_flags()has been dropped but it was only a
-wrapper to callof_get_named_gpio()if the flags passed was NULL and thispackage/wilc-driver/0006-Support-Linux-6.3.patch deleted +0
-5-is the case. So let's use of_get_named_gpio() in place of -of_get_named_gpio_flags() since of_get_named_gpio() never changed -after its adding in Linux version 3.1. - -Upstream:https://github.com/embeddedTS/wilc3000-external-module/pull/4
package/wilc-driver/0006-Support-Linux-6.3.patch deleted +0
-2- -Signed-off-by: Giulio Benetti<[email protected]>
----
-power.c| 6 ++----
- 1 file changed, 2 insertions(+), 4 deletions(-)package/wilc-driver/0006-Support-Linux-6.3.patch deleted +0
-10- -diff --git a/power.c b/power.c -index 6c59e0b..6ab8d63 100644 ---- a/power.c -+++ b/power.c -@@ -25,13 +25,11 @@ int wilc_of_parse_power_pins(struct wilc *wilc) - const struct wilc_power_gpios *gpios = &default_gpios[0]; - int ret; - -- power->gpios.reset = of_get_named_gpio_flags(of, "reset-gpios", 0,
-- NULL);
-+power->gpios.reset=of_get_named_gpio(of, "reset-gpios", 0);package/wilc-driver/0006-Support-Linux-6.3.patch deleted +0
-4- if (!gpio_is_valid(power->gpios.reset)) - power->gpios.reset = gpios->reset; - -- power->gpios.chip_en = of_get_named_gpio_flags(of, "chip_en-gpios", 0,
-- NULL);
-+power->gpios.chip_en= of_get_named_gpio(of, "chip_en-gpios",
0);package/wilc-driver/0006-Support-Linux-6.3.patch deleted +0
-6- if (!gpio_is_valid(power->gpios.chip_en)) - power->gpios.chip_en = gpios->chip_en; - --- -2.34.1 -package/wilc-driver/0007-Support-Linux-6.4.patch deleted +0
-1@@ -1,36 +0,0 @@ -From 94fc4594659494b8c5cbdf1a719aea4d66d3398d Mon Sep 17 00:00:002001
package/wilc-driver/0007-Support-Linux-6.4.patch deleted +0
-6-From: Giulio Benetti <[email protected]> -Date: Wed, 27 Sep 2023 11:20:50 +0200 -Subject: [PATCH] Support Linux 6.4 - -With Linux 6.4 commit: -https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=1aaba11da9aa7d7d6b52a74d45b31cac118295a1
-class_create() doesn't require first argumentTHIS_MODULEanymore so let'spackage/wilc-driver/0007-Support-Linux-6.4.patch deleted +0
-3-drop first argument if Linux version >= 6.4 - -Upstream:https://github.com/embeddedTS/wilc3000-external-module/pull/5
package/wilc-driver/0007-Support-Linux-6.4.patch deleted +0
-2- -Signed-off-by: Giulio Benetti<[email protected]>
----
-bt.c| 4 ++++
- 1 file changed, 4 insertions(+)package/wilc-driver/0007-Support-Linux-6.4.patch deleted +0
-20- -diff --git a/bt.c b/bt.c -index 48a5302..a752457 100644 ---- a/bt.c -+++ b/bt.c -@@ -135,7 +135,11 @@ static void wilc_bt_create_device(void) - ret = alloc_chrdev_region(&chc_dev_no, 0, 1, "atmel"); - if (ret < 0) - return; -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(6, 4, 0) -+ chc_dev_class = class_create("atmel"); -+#else - chc_dev_class = class_create(THIS_MODULE, "atmel"); -+#endif - if (IS_ERR(chc_dev_class)) { - unregister_chrdev_region(chc_dev_no, 1); - return; --- -2.34.1 -package/wilc- renamed from package/wilc-driver/wilc-driver.hash +0
-0driver/wilc-driver.hash
index4ada813ed8..43e004068c100644package/wilc-driver/wilc-driver.hash +0
-1@@ -1,3 +1,3 @@ # Locally calculated -sha256
4796b1a53781f8702a335b0146d488a9422b71dab39f6f154f955b0ad1711199wilc-driver-linux4microchip-2021.10-1.tar.gz
+sha25666e9d889a5dbfad91c74f52df497d9ef9e353559231e4bc251136422bfc0cc00wilc-driver-linux4microchip-2024.04.tar.gz
sha256f6b78c087c3ebdf0f3c13415070dd480a3f35d8fc76f3d02180a407c1c812f79LICENSEpackage/wilc- renamed from package/wilc-driver/wilc-driver.mk +0
-0
driver/wilc-driver.mk
indexa7a902b6db..7879b88c58100644package/wilc-driver/wilc-driver.mk +0
-0@@ -4,7 +4,7 @@ # #################################################################### ############
Quoted 8 lines
Quoted 6 lines
package/wilc-driver/wilc-driver.mk +1
-1-WILC_DRIVER_VERSION = linux4microchip-2021.10-1 +WILC_DRIVER_VERSION = linux4microchip-2024.04 WILC_DRIVER_SITE = $(call github,embeddedTS,wilc3000-external- module,$(WILC_DRIVER_VERSION))
WILC_DRIVER_LICENSE= GPL-2.0
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
Quoted 11 lines · On Mon, 15 Jul 2024 11:25:13 -0700 Kris Bahnsen via buildroot…
Be advised that this does NOT support "up to" Linux 6.6. The latest updates from Microchip drop any backwards compatibility support, which is why we have not pushed this up to Buildroot yet.
I think this only will support kernels 6.2~6.6 and currently do not believe it will compile against upstream Linux 6.9 (I tested it a while ago but don't remember the outcome as it wasn't important).
As I mentioned in my previous email responding to build failures, we're working on a solution to be able to handle backwards compatibility with 'backports' but are first catching up on other tasks.
So what can we do in the mean time? Support a few versions of the driver, and let the user chose?
Thomas
Signature · 7 lines
Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
Quoted 13 lines · Thomas Petazzoni
Quoted 10 lines · On Mon, 15 Jul 2024 11:25:13 -0700 Kris Bahnsen via buildroot…
Be advised that this does NOT support "up to" Linux 6.6. The latest updates from Microchip drop any backwards compatibility support, which
is why we have not pushed this up to Buildroot yet.I think this only will support kernels 6.2~6.6 and currently do not believe it will compile against upstream Linux 6.9 (I tested it a while
ago but don't remember the outcome as it wasn't important).
Quoted 8 lines
Quoted 5 lines
As I mentioned in my previous email responding to build failures, we're
working on a solution to be able to handle backwards compatibility with
'backports' but are first catching up on other tasks.So what can we do in the mean time? Support a few versions of the driver, and let the user chose?
At this time the driver that is in Buildroot, with the patches submitted by Giulio, I believe will compile up to Linux 6.4. Most of the testing we did on the latest driver updates was for Linux 6.6 (latest LTS), which did not cleanly compile with the existing patches from Giulio which is why we pulled in the latest updates from Microchip.
This patch could be modified to support the older linux4microchip- 2021.10-1 tag on Linux <= 6.4, and linux4microchip-2024.04 tag for Linux == 6.6 But I'm not sure the best way to go about that other than adding a Config 'choice' to select between the two, but that would put the burden on the user to select the correct option.
But the issue also remains that it currently does not compile against 6.9 (I just confirmed this via a test) which I am not greenlit to put time in to patching the driver solely for 6.9 at this time.
We are working on upstreaming platform support for many of our products, but with how fiddly the WILC3000 driver is, we're going to focus on that first so I hope to have a real solution sooner rather than later.
Quoted 2 lines
Thomas
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot