arm: Remove omap4_panda board
Subsystems (9)
PATCH 1/5 arm: Remove omap4_panda board
This board has not been converted to CONFIG_DM_I2C by the deadline. Remove it.
--- arch/arm/dts/Makefile | 4 - arch/arm/dts/omap4-panda-common.dtsi | 573 --------------------------- arch/arm/dts/omap4-panda-es.dts | 82 ---- arch/arm/dts/omap4-panda.dts | 13 - arch/arm/mach-omap2/omap4/Kconfig | 4 - board/ti/panda/Kconfig | 14 - board/ti/panda/MAINTAINERS | 6 - board/ti/panda/Makefile | 6 - board/ti/panda/panda.c | 322 --------------- board/ti/panda/panda_mux_data.h | 86 ---- configs/omap4_panda_defconfig | 54 --- include/configs/omap4_panda.h | 16 - 12 files changed, 1180 deletions(-) delete mode 100644 arch/arm/dts/omap4-panda-common.dtsi delete mode 100644 arch/arm/dts/omap4-panda-es.dts delete mode 100644 arch/arm/dts/omap4-panda.dts delete mode 100644 board/ti/panda/Kconfig delete mode 100644 board/ti/panda/MAINTAINERS delete mode 100644 board/ti/panda/Makefile delete mode 100644 board/ti/panda/panda.c delete mode 100644 board/ti/panda/panda_mux_data.h delete mode 100644 configs/omap4_panda_defconfig delete mode 100644 include/configs/omap4_panda.h
arch/arm/dts/Makefile +0 -4
@@ -1017,10 +1017,6 @@ dtb-$(CONFIG_TARGET_OMAP3_BEAGLE) += \ dtb-$(CONFIG_TARGET_DEVKIT8000) += omap3-devkit8000.dtb -dtb-$(CONFIG_TARGET_OMAP4_PANDA) += \ - omap4-panda.dtb \ - omap4-panda-es.dtb - dtb-$(CONFIG_TARGET_OMAP4_SDP4430) += \ omap4-sdp.dtb \ omap4-sdp-es23plus.dtb
arch/arm/dts/omap4-panda-common.dtsi deleted +0 -573
573 lines not on this page · raw message
arch/arm/dts/omap4-panda-es.dts deleted +0 -82
82 lines not on this page · raw message
arch/arm/dts/omap4-panda.dts deleted +0 -13
@@ -1,13 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/ - */ -/dts-v1/; - -#include "omap443x.dtsi" -#include "omap4-panda-common.dtsi" - -/ { - model = "TI OMAP4 PandaBoard"; - compatible = "ti,omap4-panda", "ti,omap4430", "ti,omap4"; -};
arch/arm/mach-omap2/omap4/Kconfig +0 -4
@@ -4,9 +4,6 @@ choice prompt "OMAP4 board select" optional -config TARGET_OMAP4_PANDA - bool "TI OMAP4 PandaBoard" - config TARGET_OMAP4_SDP4430 bool "TI OMAP4 SDP4430"
@@ -15,7 +12,6 @@ endchoice config SYS_SOC default "omap4" -source "board/ti/panda/Kconfig" source "board/ti/sdp4430/Kconfig" endif
board/ti/panda/Kconfig deleted +0 -14
@@ -1,14 +0,0 @@ -if TARGET_OMAP4_PANDA - -config SYS_BOARD - default "panda" - -config SYS_VENDOR - default "ti" - -config SYS_CONFIG_NAME - default "omap4_panda" - -source "board/ti/common/Kconfig" - -endif
board/ti/panda/MAINTAINERS deleted +0 -6
@@ -1,6 +0,0 @@ -PANDA BOARD -M: Tom Rini <[email protected]> -S: Maintained -F: board/ti/panda/ -F: include/configs/omap4_panda.h -F: configs/omap4_panda_defconfig
board/ti/panda/Makefile deleted +0 -6
@@ -1,6 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# (C) Copyright 2000, 2001, 2002 -# Wolfgang Denk, DENX Software Engineering, [email protected]. - -obj-y := panda.o
board/ti/panda/panda.c deleted +0 -322
322 lines not on this page · raw message
board/ti/panda/panda_mux_data.h deleted +0 -86
86 lines not on this page · raw message
configs/omap4_panda_defconfig deleted +0 -54
54 lines not on this page · raw message
include/configs/omap4_panda.h deleted +0 -16
@@ -1,16 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* -* (C) Copyright 2010 -* Texas Instruments Incorporated. -* Steve Sakoman <[email protected]> -* -* Configuration settings for the TI OMAP4 Panda board. -* See ti_omap4_common.h for OMAP4 common part -*/ - -#ifndef __CONFIG_PANDA_H -#define __CONFIG_PANDA_H - -#include <configs/ti_omap4_common.h> - -#endif /* __CONFIG_PANDA_H */
Signature · 1 line
2.34.1
PATCH 2/5 arm: Remove omap4_sdp4430 board
This board has not been converted to CONFIG_DM_I2C by the deadline. Remove it.
--- arch/arm/dts/Makefile | 4 - arch/arm/dts/elpida_ecb240abacn.dtsi | 68 - arch/arm/dts/omap4-l4-abe.dtsi | 488 ----- arch/arm/dts/omap4-l4.dtsi | 2473 -------------------------- arch/arm/dts/omap4-mcpdm.dtsi | 44 - arch/arm/dts/omap4-sdp-es23plus.dts | 14 - arch/arm/dts/omap4-sdp.dts | 717 -------- arch/arm/dts/omap4-u-boot.dtsi | 47 - arch/arm/dts/omap4.dtsi | 663 ------- arch/arm/dts/omap443x-clocks.dtsi | 16 - arch/arm/dts/omap443x.dtsi | 73 - arch/arm/dts/omap4460.dtsi | 128 -- arch/arm/dts/omap446x-clocks.dtsi | 24 - arch/arm/dts/omap44xx-clocks.dtsi | 1324 -------------- arch/arm/dts/twl6030.dtsi | 105 -- arch/arm/dts/twl6030_omap4.dtsi | 35 - arch/arm/mach-omap2/omap4/Kconfig | 10 - board/ti/sdp4430/Kconfig | 17 - board/ti/sdp4430/MAINTAINERS | 6 - board/ti/sdp4430/Makefile | 10 - board/ti/sdp4430/cmd_bat.c | 40 - board/ti/sdp4430/sdp.c | 114 -- board/ti/sdp4430/sdp4430_mux_data.h | 67 - configs/omap4_sdp4430_defconfig | 51 - include/configs/omap4_sdp4430.h | 23 - 25 files changed, 6561 deletions(-) delete mode 100644 arch/arm/dts/elpida_ecb240abacn.dtsi delete mode 100644 arch/arm/dts/omap4-l4-abe.dtsi delete mode 100644 arch/arm/dts/omap4-l4.dtsi delete mode 100644 arch/arm/dts/omap4-mcpdm.dtsi delete mode 100644 arch/arm/dts/omap4-sdp-es23plus.dts delete mode 100644 arch/arm/dts/omap4-sdp.dts delete mode 100644 arch/arm/dts/omap4-u-boot.dtsi delete mode 100644 arch/arm/dts/omap4.dtsi delete mode 100644 arch/arm/dts/omap443x-clocks.dtsi delete mode 100644 arch/arm/dts/omap443x.dtsi delete mode 100644 arch/arm/dts/omap4460.dtsi delete mode 100644 arch/arm/dts/omap446x-clocks.dtsi delete mode 100644 arch/arm/dts/omap44xx-clocks.dtsi delete mode 100644 arch/arm/dts/twl6030.dtsi delete mode 100644 arch/arm/dts/twl6030_omap4.dtsi delete mode 100644 board/ti/sdp4430/Kconfig delete mode 100644 board/ti/sdp4430/MAINTAINERS delete mode 100644 board/ti/sdp4430/Makefile delete mode 100644 board/ti/sdp4430/cmd_bat.c delete mode 100644 board/ti/sdp4430/sdp.c delete mode 100644 board/ti/sdp4430/sdp4430_mux_data.h delete mode 100644 configs/omap4_sdp4430_defconfig delete mode 100644 include/configs/omap4_sdp4430.h
arch/arm/dts/Makefile +0 -4
@@ -1017,10 +1017,6 @@ dtb-$(CONFIG_TARGET_OMAP3_BEAGLE) += \ dtb-$(CONFIG_TARGET_DEVKIT8000) += omap3-devkit8000.dtb -dtb-$(CONFIG_TARGET_OMAP4_SDP4430) += \ - omap4-sdp.dtb \ - omap4-sdp-es23plus.dtb - dtb-$(CONFIG_TARGET_SAMA7G5EK) += \ at91-sama7g5ek.dtb
arch/arm/dts/elpida_ecb240abacn.dtsi deleted +0 -68
68 lines not on this page · raw message
arch/arm/dts/omap4-l4-abe.dtsi deleted +0 -488
488 lines not on this page · raw message
arch/arm/dts/omap4-l4.dtsi deleted +0 -2473
2,434 lines not on this page · raw message
arch/arm/dts/omap4-mcpdm.dtsi deleted +0 -44
44 lines not on this page · raw message
arch/arm/dts/omap4-sdp-es23plus.dts deleted +0 -14
Lines of this file are not shown. View the raw message.
arch/arm/dts/omap4-sdp.dts deleted +0 -717
717 lines not on this page · raw message
arch/arm/dts/omap4-u-boot.dtsi deleted +0 -47
47 lines not on this page · raw message
arch/arm/dts/omap4.dtsi deleted +0 -663
663 lines not on this page · raw message
arch/arm/dts/omap443x-clocks.dtsi deleted +0 -16
Lines of this file are not shown. View the raw message.
arch/arm/dts/omap443x.dtsi deleted +0 -73
73 lines not on this page · raw message
arch/arm/dts/omap4460.dtsi deleted +0 -128
128 lines not on this page · raw message
arch/arm/dts/omap446x-clocks.dtsi deleted +0 -24
Lines of this file are not shown. View the raw message.
arch/arm/dts/omap44xx-clocks.dtsi deleted +0 -1324
1,324 lines not on this page · raw message
arch/arm/dts/twl6030.dtsi deleted +0 -105
105 lines not on this page · raw message
arch/arm/dts/twl6030_omap4.dtsi deleted +0 -35
Lines of this file are not shown. View the raw message.
board/ti/sdp4430/sdp.c deleted +0 -114
114 lines not on this page · raw message
board/ti/sdp4430/sdp4430_mux_data.h deleted +0 -67
67 lines not on this page · raw message
configs/omap4_sdp4430_defconfig deleted +0 -51
51 lines not on this page · raw message
include/configs/omap4_sdp4430.h deleted +0 -23
Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
Signature · 1 line
2.34.1
Part of the diff is not shown here. View the raw message.
PATCH 3/5 arm: ti: Remove omap4 platform support
In reply to Tom RiniThere are no longer any OMAP4 platforms in U-Boot, remove the related functionality.
--- arch/arm/include/asm/arch-omap4/clock.h | 250 ---------- arch/arm/include/asm/arch-omap4/cpu.h | 109 ----- arch/arm/include/asm/arch-omap4/ehci.h | 38 -- arch/arm/include/asm/arch-omap4/gpio.h | 34 -- arch/arm/include/asm/arch-omap4/hardware.h | 25 - arch/arm/include/asm/arch-omap4/i2c.h | 11 - arch/arm/include/asm/arch-omap4/mem.h | 61 --- .../arm/include/asm/arch-omap4/mmc_host_def.h | 38 -- arch/arm/include/asm/arch-omap4/mux_omap4.h | 328 ------------- arch/arm/include/asm/arch-omap4/omap.h | 143 ------ arch/arm/include/asm/arch-omap4/spl.h | 22 - arch/arm/include/asm/arch-omap4/sys_proto.h | 71 --- arch/arm/include/asm/omap_common.h | 16 +- arch/arm/mach-omap2/Kconfig | 27 +- arch/arm/mach-omap2/Makefile | 3 +- arch/arm/mach-omap2/emif-common.c | 4 - arch/arm/mach-omap2/omap4/Kconfig | 7 - arch/arm/mach-omap2/omap4/Makefile | 11 - arch/arm/mach-omap2/omap4/boot.c | 103 ---- arch/arm/mach-omap2/omap4/emif.c | 109 ----- arch/arm/mach-omap2/omap4/hw_data.c | 460 ------------------ arch/arm/mach-omap2/omap4/hwinit.c | 186 ------- arch/arm/mach-omap2/omap4/prcm-regs.c | 306 ------------ arch/arm/mach-omap2/omap4/sdram_elpida.c | 323 ------------ common/spl/Kconfig | 4 +- drivers/i2c/Kconfig | 2 +- drivers/mmc/Kconfig | 2 +- drivers/mmc/omap_hsmmc.c | 13 +- drivers/power/Kconfig | 4 - drivers/power/Makefile | 1 - drivers/power/twl6030.c | 311 ------------ drivers/serial/ns16550.c | 3 +- drivers/usb/musb-new/linux-compat.h | 4 - drivers/usb/musb-new/musb_core.c | 2 +- drivers/usb/musb-new/musb_core.h | 2 +- drivers/usb/musb-new/omap2430.c | 12 - drivers/usb/musb/omap3.c | 15 - include/twl6030.h | 224 --------- 38 files changed, 22 insertions(+), 3262 deletions(-) delete mode 100644 arch/arm/include/asm/arch-omap4/clock.h delete mode 100644 arch/arm/include/asm/arch-omap4/cpu.h delete mode 100644 arch/arm/include/asm/arch-omap4/ehci.h delete mode 100644 arch/arm/include/asm/arch-omap4/gpio.h delete mode 100644 arch/arm/include/asm/arch-omap4/hardware.h delete mode 100644 arch/arm/include/asm/arch-omap4/i2c.h delete mode 100644 arch/arm/include/asm/arch-omap4/mem.h delete mode 100644 arch/arm/include/asm/arch-omap4/mmc_host_def.h delete mode 100644 arch/arm/include/asm/arch-omap4/mux_omap4.h delete mode 100644 arch/arm/include/asm/arch-omap4/omap.h delete mode 100644 arch/arm/include/asm/arch-omap4/spl.h delete mode 100644 arch/arm/include/asm/arch-omap4/sys_proto.h delete mode 100644 arch/arm/mach-omap2/omap4/Kconfig delete mode 100644 arch/arm/mach-omap2/omap4/Makefile delete mode 100644 arch/arm/mach-omap2/omap4/boot.c delete mode 100644 arch/arm/mach-omap2/omap4/emif.c delete mode 100644 arch/arm/mach-omap2/omap4/hw_data.c delete mode 100644 arch/arm/mach-omap2/omap4/hwinit.c delete mode 100644 arch/arm/mach-omap2/omap4/prcm-regs.c delete mode 100644 arch/arm/mach-omap2/omap4/sdram_elpida.c delete mode 100644 drivers/power/twl6030.c delete mode 100644 include/twl6030.h
arch/arm/include/asm/arch-omap4/clock.h deleted +0 -250
@@ -1,250 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* -* (C) Copyright 2010 -* Texas Instruments, <www.ti.com> -* -* Aneesh V <[email protected]> -*/ -#ifndef _CLOCKS_OMAP4_H_ -#define _CLOCKS_OMAP4_H_ - -/* -* Assuming a maximum of 1.5 GHz ARM speed and a minimum of 2 cycles per -* loop, allow for a minimum of 2 ms wait (in reality the wait will be -* much more than that) -*/ -#define LDELAY 1000000 - -/* CM_DLL_CTRL */ -#define CM_DLL_CTRL_OVERRIDE_SHIFT 0 -#define CM_DLL_CTRL_OVERRIDE_MASK (1 << 0) -#define CM_DLL_CTRL_NO_OVERRIDE 0 - -/* CM_CLKMODE_DPLL */ -#define CM_CLKMODE_DPLL_REGM4XEN_SHIFT 11 -#define CM_CLKMODE_DPLL_REGM4XEN_MASK (1 << 11) -#define CM_CLKMODE_DPLL_LPMODE_EN_SHIFT 10 -#define CM_CLKMODE_DPLL_LPMODE_EN_MASK (1 << 10) -#define CM_CLKMODE_DPLL_RELOCK_RAMP_EN_SHIFT 9 -#define CM_CLKMODE_DPLL_RELOCK_RAMP_EN_MASK (1 << 9) -#define CM_CLKMODE_DPLL_DRIFTGUARD_EN_SHIFT 8 -#define CM_CLKMODE_DPLL_DRIFTGUARD_EN_MASK (1 << 8) -#define CM_CLKMODE_DPLL_RAMP_RATE_SHIFT 5 -#define CM_CLKMODE_DPLL_RAMP_RATE_MASK (0x7 << 5) -#define CM_CLKMODE_DPLL_EN_SHIFT 0 -#define CM_CLKMODE_DPLL_EN_MASK (0x7 << 0) - -#define CM_CLKMODE_DPLL_DPLL_EN_SHIFT 0 -#define CM_CLKMODE_DPLL_DPLL_EN_MASK 7 - -#define DPLL_EN_STOP 1 -#define DPLL_EN_MN_BYPASS 4 -#define DPLL_EN_LOW_POWER_BYPASS 5 -#define DPLL_EN_FAST_RELOCK_BYPASS 6 -#define DPLL_EN_LOCK 7 - -/* CM_IDLEST_DPLL fields */ -#define ST_DPLL_CLK_MASK 1 - -/* CM_CLKSEL_DPLL */ -#define CM_CLKSEL_DPLL_DPLL_SD_DIV_SHIFT 24 -#define CM_CLKSEL_DPLL_DPLL_SD_DIV_MASK (0xFF << 24) -#define CM_CLKSEL_DPLL_M_SHIFT 8 -#define CM_CLKSEL_DPLL_M_MASK (0x7FF << 8) -#define CM_CLKSEL_DPLL_N_SHIFT 0 -#define CM_CLKSEL_DPLL_N_MASK 0x7F -#define CM_CLKSEL_DCC_EN_SHIFT 22 -#define CM_CLKSEL_DCC_EN_MASK (1 << 22) - -/* CM_SYS_CLKSEL */ -#define CM_SYS_CLKSEL_SYS_CLKSEL_MASK 7 - -/* CM_CLKSEL_CORE */ -#define CLKSEL_CORE_SHIFT 0 -#define CLKSEL_L3_SHIFT 4 -#define CLKSEL_L4_SHIFT 8 - -#define CLKSEL_CORE_X2_DIV_1 0 -#define CLKSEL_L3_CORE_DIV_2 1 -#define CLKSEL_L4_L3_DIV_2 1 - -/* CM_ABE_PLL_REF_CLKSEL */ -#define CM_ABE_PLL_REF_CLKSEL_CLKSEL_SHIFT 0 -#define CM_ABE_PLL_REF_CLKSEL_CLKSEL_MASK 1 -#define CM_ABE_PLL_REF_CLKSEL_CLKSEL_SYSCLK 0 -#define CM_ABE_PLL_REF_CLKSEL_CLKSEL_32KCLK 1 - -/* CM_BYPCLK_DPLL_IVA */ -#define CM_BYPCLK_DPLL_IVA_CLKSEL_SHIFT 0 -#define CM_BYPCLK_DPLL_IVA_CLKSEL_MASK 3 - -#define DPLL_IVA_CLKSEL_CORE_X2_DIV_2 1 - -/* CM_SHADOW_FREQ_CONFIG1 */ -#define SHADOW_FREQ_CONFIG1_FREQ_UPDATE_MASK 1 -#define SHADOW_FREQ_CONFIG1_DLL_OVERRIDE_MASK 4 -#define SHADOW_FREQ_CONFIG1_DLL_RESET_MASK 8 - -#define SHADOW_FREQ_CONFIG1_DPLL_EN_SHIFT 8 -#define SHADOW_FREQ_CONFIG1_DPLL_EN_MASK (7 << 8) - -#define SHADOW_FREQ_CONFIG1_M2_DIV_SHIFT 11 -#define SHADOW_FREQ_CONFIG1_M2_DIV_MASK (0x1F << 11) - -/*CM_<clock_domain>__CLKCTRL */ -#define CD_CLKCTRL_CLKTRCTRL_SHIFT 0 -#define CD_CLKCTRL_CLKTRCTRL_MASK 3 - -#define CD_CLKCTRL_CLKTRCTRL_NO_SLEEP 0 -#define CD_CLKCTRL_CLKTRCTRL_SW_SLEEP 1 -#define CD_CLKCTRL_CLKTRCTRL_SW_WKUP 2 -#define CD_CLKCTRL_CLKTRCTRL_HW_AUTO 3 - - -/* CM_<clock_domain>_<module>_CLKCTRL */ -#define MODULE_CLKCTRL_MODULEMODE_SHIFT 0 -#define MODULE_CLKCTRL_MODULEMODE_MASK 3 -#define MODULE_CLKCTRL_IDLEST_SHIFT 16 -#define MODULE_CLKCTRL_IDLEST_MASK (3 << 16) - -#define MODULE_CLKCTRL_MODULEMODE_SW_DISABLE 0 -#define MODULE_CLKCTRL_MODULEMODE_HW_AUTO 1 -#define MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN 2 - -#define MODULE_CLKCTRL_IDLEST_FULLY_FUNCTIONAL 0 -#define MODULE_CLKCTRL_IDLEST_TRANSITIONING 1 -#define MODULE_CLKCTRL_IDLEST_IDLE 2 -#define MODULE_CLKCTRL_IDLEST_DISABLED 3 - -/* CM_L4PER_GPIO4_CLKCTRL */ -#define GPIO4_CLKCTRL_OPTFCLKEN_MASK (1 << 8) - -/* CM_L3INIT_HSMMCn_CLKCTRL */ -#define HSMMC_CLKCTRL_CLKSEL_MASK (1 << 24) - -/* CM_WKUP_GPTIMER1_CLKCTRL */ -#define GPTIMER1_CLKCTRL_CLKSEL_MASK (1 << 24) - -/* CM_CAM_ISS_CLKCTRL */ -#define ISS_CLKCTRL_OPTFCLKEN_MASK (1 << 8) - -/* CM_DSS_DSS_CLKCTRL */ -#define DSS_CLKCTRL_OPTFCLKEN_MASK 0xF00 - -/* CM_COREAON_USB_PHY_CORE_CLKCTRL */ -#define USBPHY_CORE_CLKCTRL_OPTFCLKEN_CLK32K (1 << 8) - -/* CM_L3INIT_USBPHY_CLKCTRL */ -#define USBPHY_CLKCTRL_OPTFCLKEN_PHY_48M_MASK (1 << 8) - -/* CM_MPU_MPU_CLKCTRL */ -#define MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_SHIFT 24 -#define MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_MASK (1 << 24) -#define MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_SHIFT 25 -#define MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_MASK (1 << 25) - -/* Clock frequencies */ -#define OMAP_SYS_CLK_IND_38_4_MHZ 6 - -/* PRM_VC_VAL_BYPASS */ -#define PRM_VC_I2C_CHANNEL_FREQ_KHZ 400 - -/* PMIC */ -#define SMPS_I2C_SLAVE_ADDR 0x12 -/* TWL6030 SMPS */ -#define SMPS_REG_ADDR_VCORE1 0x55 -#define SMPS_REG_ADDR_VCORE2 0x5B -#define SMPS_REG_ADDR_VCORE3 0x61 -/* TWL6032 SMPS */ -#define SMPS_REG_ADDR_SMPS1 0x55 -#define SMPS_REG_ADDR_SMPS2 0x5B -#define SMPS_REG_ADDR_SMPS5 0x49 - -#define PHOENIX_SMPS_BASE_VOLT_STD_MODE_UV 607700 -#define PHOENIX_SMPS_BASE_VOLT_STD_MODE_WITH_OFFSET_UV 709000 - -/* TPS */ -#define TPS62361_I2C_SLAVE_ADDR 0x60 -#define TPS62361_REG_ADDR_SET0 0x0 -#define TPS62361_REG_ADDR_SET1 0x1 -#define TPS62361_REG_ADDR_SET2 0x2 -#define TPS62361_REG_ADDR_SET3 0x3 -#define TPS62361_REG_ADDR_CTRL 0x4 -#define TPS62361_REG_ADDR_TEMP 0x5 -#define TPS62361_REG_ADDR_RMP_CTRL 0x6 -#define TPS62361_REG_ADDR_CHIP_ID 0x8 -#define TPS62361_REG_ADDR_CHIP_ID_2 0x9 - -#define TPS62361_BASE_VOLT_MV 500 -#define TPS62361_VSEL0_GPIO 7 - -/* AUXCLKx reg fields */ -#define AUXCLK_ENABLE_MASK (1 << 8) -#define AUXCLK_SRCSELECT_SHIFT 1 -#define AUXCLK_SRCSELECT_MASK (3 << 1) -#define AUXCLK_CLKDIV_SHIFT 16 -#define AUXCLK_CLKDIV_MASK (0xF << 16) - -#define AUXCLK_SRCSELECT_SYS_CLK 0 -#define AUXCLK_SRCSELECT_CORE_DPLL 1 -#define AUXCLK_SRCSELECT_PER_DPLL 2 -#define AUXCLK_SRCSELECT_ALTERNATE 3 - -#define AUXCLK_CLKDIV_2 1 -#define AUXCLK_CLKDIV_16 0xF - -/* ALTCLKSRC */ -#define ALTCLKSRC_MODE_MASK 3 -#define ALTCLKSRC_ENABLE_INT_MASK 4 -#define ALTCLKSRC_ENABLE_EXT_MASK 8 - -#define ALTCLKSRC_MODE_ACTIVE 1 - -#define DPLL_NO_LOCK 0 -#define DPLL_LOCK 1 - -/* Clock Defines */ -#define V_OSCK 38400000/* Clock output from T2 */ -#define V_SCLK V_OSCK - -struct omap4_scrm_regs { -u32 revision;/* 0x0000 */ -u32 pad00[63 ]; -u32 clksetuptime;/* 0x0100 */ -u32 pmicsetuptime;/* 0x0104 */ -u32 pad01[2 ]; -u32 altclksrc;/* 0x0110 */ -u32 pad02[2 ]; -u32 c2cclkm;/* 0x011c */ -u32 pad03[56 ]; -u32 extclkreq;/* 0x0200 */ -u32 accclkreq;/* 0x0204 */ -u32 pwrreq;/* 0x0208 */ -u32 pad04[1 ]; -u32 auxclkreq0;/* 0x0210 */ -u32 auxclkreq1;/* 0x0214 */ -u32 auxclkreq2;/* 0x0218 */ -u32 auxclkreq3;/* 0x021c */ -u32 auxclkreq4;/* 0x0220 */ -u32 auxclkreq5;/* 0x0224 */ -u32 pad05[3 ]; -u32 c2cclkreq;/* 0x0234 */ -u32 pad06[54 ]; -u32 auxclk0;/* 0x0310 */ -u32 auxclk1;/* 0x0314 */ -u32 auxclk2;/* 0x0318 */ -u32 auxclk3;/* 0x031c */ -u32 auxclk4;/* 0x0320 */ -u32 auxclk5;/* 0x0324 */ -u32 pad07[54 ]; -u32 rsttime_reg;/* 0x0400 */ -u32 pad08[6 ]; -u32 c2crstctrl;/* 0x041c */ -u32 extpwronrstctrl;/* 0x0420 */ -u32 pad09[59 ]; -u32 extwarmrstst_reg;/* 0x0510 */ -u32 apewarmrstst_reg;/* 0x0514 */ -u32 pad10[1 ]; -u32 c2cwarmrstst_reg;/* 0x051C */ -}; -#endif /* _CLOCKS_OMAP4_H_ */
arch/arm/include/asm/arch-omap4/cpu.h deleted +0 -109
109 lines not on this page · raw message
arch/arm/include/asm/arch-omap4/ehci.h deleted +0 -38
@@ -1,38 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* -* OMAP EHCI port support -* Based on LINUX KERNEL -* drivers/usb/host/ehci-omap.c and drivers/mfd/omap-usb-host.c -* -* Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com -* Author: Govindraj R <[email protected]> -*/ - -#ifndef _OMAP4_EHCI_H_ -#define _OMAP4_EHCI_H_ - -#define OMAP_EHCI_BASE (OMAP44XX_L4_CORE_BASE + 0x64C00) -#define OMAP_UHH_BASE (OMAP44XX_L4_CORE_BASE + 0x64000) -#define OMAP_USBTLL_BASE (OMAP44XX_L4_CORE_BASE + 0x62000) - -/* UHH, TLL and opt clocks */ -#define CM_L3INIT_HSUSBHOST_CLKCTRL 0x4A009358UL - -#define HSUSBHOST_CLKCTRL_CLKSEL_UTMI_P1_MASK (1 << 24) - -/* TLL Register Set */ -#define OMAP_USBTLL_SYSCONFIG_SIDLEMODE (1 << 3) -#define OMAP_USBTLL_SYSCONFIG_ENAWAKEUP (1 << 2) -#define OMAP_USBTLL_SYSCONFIG_SOFTRESET (1 << 1) -#define OMAP_USBTLL_SYSCONFIG_CACTIVITY (1 << 8) -#define OMAP_USBTLL_SYSSTATUS_RESETDONE 1 - -#define OMAP_UHH_SYSCONFIG_SOFTRESET 1 -#define OMAP_UHH_SYSSTATUS_EHCI_RESETDONE (1 << 2) -#define OMAP_UHH_SYSCONFIG_NOIDLE (1 << 2) -#define OMAP_UHH_SYSCONFIG_NOSTDBY (1 << 4) - -#define OMAP_UHH_SYSCONFIG_VAL (OMAP_UHH_SYSCONFIG_NOIDLE | \ - OMAP_UHH_SYSCONFIG_NOSTDBY) - -#endif /* _OMAP4_EHCI_H_ */
arch/arm/include/asm/arch-omap4/gpio.h deleted +0 -34
@@ -1,34 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* -* Copyright (c) 2009 Wind River Systems, Inc. -* Tom Rix <[email protected]> -* -* This work is derived from the linux 2.6.27 kernel source -* To fetch, use the kernel repository -* git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git -* Use the v2.6.27 tag. -* -* Below is the original's header including its copyright -* -* linux/arch/arm/plat-omap/gpio.c -* -* Support functions for OMAP GPIO -* -* Copyright (C) 2003-2005 Nokia Corporation -* Written by Juha Yrjölä <[email protected]> -*/ -#ifndef _GPIO_OMAP4_H -#define _GPIO_OMAP4_H - -#include <asm/omap_gpio.h> - -#define OMAP_MAX_GPIO 192 - -#define OMAP44XX_GPIO1_BASE 0x4A310000 -#define OMAP44XX_GPIO2_BASE 0x48055000 -#define OMAP44XX_GPIO3_BASE 0x48057000 -#define OMAP44XX_GPIO4_BASE 0x48059000 -#define OMAP44XX_GPIO5_BASE 0x4805B000 -#define OMAP44XX_GPIO6_BASE 0x4805D000 - -#endif /* _GPIO_OMAP4_H */
arch/arm/include/asm/arch-omap4/hardware.h deleted +0 -25
@@ -1,25 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* -* hardware.h -* -* hardware specific header -* -* Copyright (C) 2013, Texas Instruments, Incorporated - https://www.ti.com/ -*/ - -#ifndef __OMAP_HARDWARE_H -#define __OMAP_HARDWARE_H - -#include <asm/arch/omap.h> - -/* -* Common hardware definitions -*/ - -/* BCH Error Location Module */ -#define ELM_BASE 0x48078000 - -/* GPMC Base address */ -#define GPMC_BASE 0x50000000 - -#endif
arch/arm/include/asm/arch-omap4/i2c.h deleted +0 -11
@@ -1,11 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* -* (C) Copyright 2004-2010 -* Texas Instruments, <www.ti.com> -*/ -#ifndef _OMAP4_I2C_H_ -#define _OMAP4_I2C_H_ - -#define I2C_DEFAULT_BASE I2C_BASE1 - -#endif /* _OMAP4_I2C_H_ */
arch/arm/include/asm/arch-omap4/mem.h deleted +0 -61
61 lines not on this page · raw message
arch/arm/include/asm/arch-omap4/mmc_host_def.h deleted +0 -38
@@ -1,38 +0,0 @@ -/* -* (C) Copyright 2010 -* Texas Instruments, <www.ti.com> -* Syed Mohammed Khasim <[email protected]> -* -* See file CREDITS for list of people who contributed to this -* project. -* -* This program is free software; you can redistribute it and/or -* modify it under the terms of the GNU General Public License as -* published by the Free Software Foundation's version 2 of -* the License. -* -* This program is distributed in the hope that it will be useful, -* but WITHOUT ANY WARRANTY; without even the implied warranty of -* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -* GNU General Public License for more details. -* -* You should have received a copy of the GNU General Public License -* along with this program; if not, write to the Free Software -* Foundation, Inc., 59 Temple Place, Suite 330, Boston, -* MA 02111-1307 USA -*/ - -#ifndef MMC_HOST_DEF_H -#define MMC_HOST_DEF_H - -#include <asm/omap_mmc.h> - -/* -* OMAP HSMMC register definitions -*/ - -#define OMAP_HSMMC1_BASE 0x4809C000 -#define OMAP_HSMMC2_BASE 0x480B4000 -#define OMAP_HSMMC3_BASE 0x480AD000 - -#endif /* MMC_HOST_DEF_H */
arch/arm/include/asm/arch-omap4/mux_omap4.h deleted +0 -328
328 lines not on this page · raw message
arch/arm/include/asm/arch-omap4/omap.h deleted +0 -143
143 lines not on this page · raw message
arch/arm/include/asm/arch-omap4/spl.h deleted +0 -22
@@ -1,22 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* -* (C) Copyright 2012 -* Texas Instruments, <www.ti.com> -*/ -#ifndef _ASM_ARCH_SPL_H_ -#define _ASM_ARCH_SPL_H_ - -#define BOOT_DEVICE_NONE 0x00 -#define BOOT_DEVICE_XIP 0x01 -#define BOOT_DEVICE_XIPWAIT 0x02 -#define BOOT_DEVICE_NAND 0x03 -#define BOOT_DEVICE_ONENAND 0x04 -#define BOOT_DEVICE_MMC1 0x05 -#define BOOT_DEVICE_MMC2 0x06 -#define BOOT_DEVICE_MMC2_2 0x07 -#define BOOT_DEVICE_UART 0x43 -#define BOOT_DEVICE_USB 0x45 - -#define MMC_BOOT_DEVICES_START BOOT_DEVICE_MMC1 -#define MMC_BOOT_DEVICES_END BOOT_DEVICE_MMC2_2 -#endif
arch/arm/include/asm/arch-omap4/sys_proto.h deleted +0 -71
71 lines not on this page · raw message
arch/arm/include/asm/omap_common.h +8 -8
@@ -490,7 +490,7 @@ struct omap_sys_ctrl_regs {u32 ctrl_core_sma_sw_1; }; -#if defined(CONFIG_OMAP44XX) || defined(CONFIG_OMAP54XX) +#if defined(CONFIG_OMAP54XX) struct dpll_params { u32 m; u32 n;
@@ -523,7 +523,7 @@ struct dpll_regs {u32 cm_div_h23_dpll;u32 cm_div_h24_dpll; }; -#endif /* CONFIG_OMAP44XX || CONFIG_OMAP54XX */ +#endif /* CONFIG_OMAP54XX */ struct dplls {const struct dpll_params *mpu;
@@ -547,7 +547,7 @@ struct pmic_data {int (*pmic_write)(u8 sa,u8 reg_addr,u8 reg_data); }; -#if defined(CONFIG_OMAP44XX ) || defined(CONFIG_OMAP54XX ) +#if defined(CONFIG_OMAP54XX )enum {OPP_LOW , OPP_NOM,
@@ -593,7 +593,7 @@ struct vcores_data {struct volts eve; struct volts iva; }; -#endif /* CONFIG_OMAP44XX || CONFIG_OMAP54XX */ +#endif /* CONFIG_OMAP54XX */ extern struct prcm_regs const **prcm;extern struct prcm_regs const omap5_es1_prcm;
@@ -626,7 +626,7 @@ const struct dpll_params *get_iva_dpll_params(struct dplls const *);const struct dpll_params *get_usb_dpll_params (struct dplls const *);const struct dpll_params *get_abe_dpll_params (struct dplls const *); -#if defined(CONFIG_OMAP44XX ) || defined(CONFIG_OMAP54XX ) +#if defined(CONFIG_OMAP54XX ) void do_enable_clocks(u32 const *clk_domains, u32 const *clk_modules_hw_auto, u32 const *clk_modules_explicit_en,
@@ -635,7 +635,7 @@ void do_enable_clocks(u32 const *clk_domains,void do_disable_clocks (u32 const *clk_domains,u32 const *clk_modules_disable,u8 wait_for_disable); -#endif /* CONFIG_OMAP44XX || CONFIG_OMAP54XX */ +#endif /* CONFIG_OMAP54XX */ void do_enable_ipu_clocks(u32 const *clk_domains, u32 const *clk_modules_hw_auto,
@@ -653,9 +653,9 @@ void enable_basic_uboot_clocks(void);void enable_usb_clocks (int index);void disable_usb_clocks (int index); -#if defined(CONFIG_OMAP44XX ) || defined(CONFIG_OMAP54XX ) +#if defined(CONFIG_OMAP54XX )void scale_vcores (struct vcores_data const *); -#endif /* CONFIG_OMAP44XX || CONFIG_OMAP54XX */ +#endif /* CONFIG_OMAP54XX */ int get_voltrail_opp (int rail_offset);u32 get_offset_code (u32 volt_offset,struct pmic_data *pmic);void do_scale_vcore (u32 vcore_reg,u32 volt_mv,struct pmic_data *pmic);
arch/arm/mach-omap2/Kconfig +1 -26
@@ -29,29 +29,6 @@ config OMAP34XX imply SYS_THUMB_BUILD imply TWL4030_POWER -config OMAP44XX - bool "OMAP44XX SoC" - select DM_EVENT - select SPL_USE_TINY_PRINTF - select SPL_SYS_NO_VECTOR_TABLE if SPL - imply NAND_OMAP_ELM - imply NAND_OMAP_GPMC - imply SPL_DISPLAY_PRINT - imply SPL_FS_EXT4 - imply SPL_FS_FAT - imply SPL_GPIO - imply SPL_I2C - imply SPL_LIBCOMMON_SUPPORT - imply SPL_LIBDISK_SUPPORT - imply SPL_LIBGENERIC_SUPPORT - imply SPL_MMC - imply SPL_NAND_SIMPLE - imply SPL_NAND_SUPPORT - imply SPL_POWER - imply SPL_SERIAL - imply SYS_I2C_OMAP24XX - imply SYS_THUMB_BUILD - config OMAP54XX bool "OMAP54XX SoC" select ARM_CORTEX_A15_CVE_2017_5715
@@ -162,7 +139,7 @@ config SYS_AUTOMATIC_SDRAM_DETECTION bool choice - depends on OMAP44XX || OMAP54XX + depends on OMAP54XX prompt "Static or dynamic DDR timing calculations" default SYS_EMIF_PRECALCULATED_TIMING_REGS help
@@ -181,8 +158,6 @@ endchoice source "arch/arm/mach-omap2/omap3/Kconfig" -source "arch/arm/mach-omap2/omap4/Kconfig" - source "arch/arm/mach-omap2/omap5/Kconfig" source "arch/arm/mach-omap2/am33xx/Kconfig"
arch/arm/mach-omap2/Makefile +1 -2
@@ -5,7 +5,6 @@ obj-$(if $(filter am33xx,$(SOC)),y) += am33xx/ obj-$(CONFIG_OMAP34XX) += omap3/ -obj-$(CONFIG_OMAP44XX) += omap4/ obj-$(CONFIG_OMAP54XX) += omap5/ obj-y += reset.o
@@ -19,7 +18,7 @@ endif obj-y += utils.o obj-y += sysinfo-common.o -ifneq ($(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX),) +ifdef CONFIG_OMAP54XX obj-y += hwinit-common.o obj-y += clocks-common.o obj-y += emif-common.o
arch/arm/mach-omap2/emif-common.c +0 -4
@@ -202,7 +202,6 @@ void emif_update_timings(u32 base, const struct emif_regs *regs) } } -#ifndef CONFIG_OMAP44XX static void omap5_ddr3_leveling (u32 base,const struct emif_regs *regs) {struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
@@ -510,7 +509,6 @@ static void ddr3_init(u32 base, const struct emif_regs *regs)else dra7_ddr3_init (base, regs); } -#endif #ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS #define print_timing_reg (reg) debug(#reg" - 0x%08x\n", (reg))
@@ -1292,10 +1290,8 @@ static void do_sdram_init(u32 base)if (emif_sdram_type (regs->sdram_config) ==EMIF_SDRAM_TYPE_LPDDR2 )lpddr2_init (base, regs); -#ifndef CONFIG_OMAP44XX else ddr3_init (base, regs); -#endif }#ifdef CONFIG_OMAP54XX if (warm_reset() && (emif_sdram_type(regs->sdram_config) ==
arch/arm/mach-omap2/omap4/Kconfig deleted +0 -7
@@ -1,7 +0,0 @@ -if OMAP44XX - -config SYS_SOC - default "omap4" - - -endif
arch/arm/mach-omap2/omap4/Makefile deleted +0 -11
@@ -1,11 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# (C) Copyright 2000-2010 -# Wolfgang Denk, DENX Software Engineering, [email protected]. - -obj-y += boot.o -obj-y += sdram_elpida.o -obj-y += hwinit.o -obj-y += emif.o -obj-y += prcm-regs.o -obj-y += hw_data.o
arch/arm/mach-omap2/omap4/boot.c deleted +0 -103
103 lines not on this page · raw message
arch/arm/mach-omap2/omap4/emif.c deleted +0 -109
109 lines not on this page · raw message
arch/arm/mach-omap2/omap4/hw_data.c deleted +0 -460
460 lines not on this page · raw message
arch/arm/mach-omap2/omap4/hwinit.c deleted +0 -186
186 lines not on this page · raw message
arch/arm/mach-omap2/omap4/prcm-regs.c deleted +0 -306
306 lines not on this page · raw message
arch/arm/mach-omap2/omap4/sdram_elpida.c deleted +0 -323
323 lines not on this page · raw message
common/spl/Kconfig +2 -2
@@ -500,7 +500,7 @@ config SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR ARCH_MX6 || ARCH_MX7 || \ ARCH_ROCKCHIP || ARCH_MVEBU || ARCH_SOCFPGA || \ ARCH_AT91 || ARCH_ZYNQ || ARCH_KEYSTONE || OMAP34XX || \ - OMAP44XX || OMAP54XX || AM33XX || AM43XX || \ + OMAP54XX || AM33XX || AM43XX || \ TARGET_SIFIVE_UNLEASHED || TARGET_SIFIVE_UNMATCHED select SPL_LOAD_BLOCK if SPL_MMC select SPL_SYS_MMCSD_RAW_MODE if SPL_MMC
@@ -517,7 +517,7 @@ config SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR default 0x100 if ARCH_UNIPHIER default 0x0 if ARCH_MVEBU default 0x200 if ARCH_SOCFPGA || ARCH_AT91 - default 0x300 if ARCH_ZYNQ || ARCH_KEYSTONE || OMAP34XX || OMAP44XX || \ + default 0x300 if ARCH_ZYNQ || ARCH_KEYSTONE || OMAP34XX || \ OMAP54XX || AM33XX || AM43XX || ARCH_K3 default 0x4000 if ARCH_ROCKCHIP default 0x822 if TARGET_SIFIVE_UNLEASHED || TARGET_SIFIVE_UNMATCHED
drivers/i2c/Kconfig +1 -1
@@ -771,7 +771,7 @@ config SYS_I2C_BUS_MAX int "Max I2C busses" depends on ARCH_OMAP2PLUS || ARCH_SOCFPGA default 3 if OMAP34XX || AM33XX || AM43XX - default 4 if ARCH_SOCFPGA || OMAP44XX + default 4 if ARCH_SOCFPGA default 5 if OMAP54XX help Define the maximum number of available I2C buses.
drivers/mmc/Kconfig +1 -1
@@ -406,7 +406,7 @@ config MMC_OMAP36XX_PINS config HSMMC2_8BIT bool "Enable 8-bit interface for eMMC (interface #2)" - depends on MMC_OMAP_HS && (OMAP44XX || OMAP54XX || DRA7XX || AM33XX || \ + depends on MMC_OMAP_HS && (OMAP54XX || DRA7XX || AM33XX || \ AM43XX || ARCH_KEYSTONE) config SH_MMCIF
drivers/mmc/omap_hsmmc.c +5 -8
@@ -30,7 +30,7 @@#include <mmc.h> #include <part.h> #include <i2c.h> -#if defined(CONFIG_OMAP54XX ) || defined(CONFIG_OMAP44XX ) +#if defined(CONFIG_OMAP54XX )#include <palmas.h> #endif #include <asm/cache.h>
@@ -270,8 +270,7 @@ static unsigned char mmc_board_init(struct mmc *mmc) &prcm_base->iclken1_core);#endif -#if (defined(CONFIG_OMAP54XX ) || defined(CONFIG_OMAP44XX )) &&\ - !CONFIG_IS_ENABLED (DM_REGULATOR ) +#if defined(CONFIG_OMAP54XX ) && !CONFIG_IS_ENABLED (DM_REGULATOR )/* PBIAS config needed for MMC1 only */ if (mmc_get_blk_desc (mmc)->devnum ==0 )vmmc_pbias_config (LDO_VOLT_3V3 );
@@ -541,8 +540,7 @@ static int omap_hsmmc_set_signal_voltage(struct mmc *mmc)#if CONFIG_IS_ENABLED (DM_REGULATOR )return omap_hsmmc_set_io_regulator (mmc, mv); -#elif (defined(CONFIG_OMAP54XX ) || defined(CONFIG_OMAP44XX )) && \ - defined(CONFIG_PALMAS_POWER ) +#elif defined(CONFIG_OMAP54XX ) && defined(CONFIG_PALMAS_POWER )if (mmc_get_blk_desc (mmc)->devnum ==0 )vmmc_pbias_config (palmas_ldo_volt);return 0 ;
@@ -905,8 +903,7 @@ static void mmc_reset_controller_fsm(struct hsmmc *mmc_base, u32 bit)* 3. Wait until the SRC (SRD) bit returns to 0x0 * (reset procedure is completed). */ -#if defined(CONFIG_OMAP44XX ) || defined(CONFIG_OMAP54XX ) || \ - defined(CONFIG_AM33XX ) || defined(CONFIG_AM43XX ) +#if defined(CONFIG_OMAP54XX ) || defined(CONFIG_AM33XX ) || defined(CONFIG_AM43XX )if (!(readl (&mmc_base->sysctl) & bit)) { start =get_timer (0 );while (!(readl (&mmc_base->sysctl) & bit)) {
@@ -1556,7 +1553,7 @@ int omap_mmc_init(int dev_index, uint host_caps_mask, uint f_max, int cd_gpio,#ifdef OMAP_HSMMC2_BASE case 1 : priv->base_addr = (struct hsmmc *)OMAP_HSMMC2_BASE ; -#if (defined(CONFIG_OMAP44XX ) || defined(CONFIG_OMAP54XX ) || \ +#if (defined(CONFIG_OMAP54XX ) || \ defined(CONFIG_DRA7XX ) || defined(CONFIG_AM33XX ) || \ defined(CONFIG_AM43XX ) || defined(CONFIG_ARCH_KEYSTONE )) && \ defined(CONFIG_HSMMC2_8BIT )
drivers/power/Kconfig +0 -4
@@ -434,10 +434,6 @@ config TWL4030_POWER The TWL4030 in a combination audio CODEC/power management with GPIO and it is commonly used with the OMAP3 family of processors -config TWL6030_POWER - depends on OMAP44XX - bool "Enable driver for TI TWL6030 power management chip" - config POWER_MT6323 bool "Poweroff driver for mediatek mt6323" select CMD_POWEROFF
drivers/power/Makefile +0 -1
@@ -19,7 +19,6 @@ obj-$(CONFIG_EXYNOS_TMU) += exynos-tmu.o obj-$(CONFIG_SY8106A_POWER) += sy8106a.o obj-$(CONFIG_TPS6586X_POWER) += tps6586x.o obj-$(CONFIG_TWL4030_POWER) += twl4030.o -obj-$(CONFIG_TWL6030_POWER) += twl6030.o obj-$(CONFIG_PALMAS_POWER) += palmas.o obj-$(CONFIG_$(SPL_TPL_)POWER_LEGACY) += power_core.o obj-$(CONFIG_DIALOG_POWER) += power_dialog.o
drivers/power/twl6030.c deleted +0 -311
130 lines not on this page · raw message
include/twl6030.h deleted +0 -224
224 lines not on this page · raw message
The rest of this diff is not shown. View the raw message.
Signature · 1 line
2.34.1
Part of the diff is not shown here. View the raw message.
PATCH 4/5 arm: Remove devkit3250 board
In reply to Tom RiniThis board has not been converted to CONFIG_DM_I2C by the deadline. Remove it.
---
Cc: Vladimir Zapolskiy <[email protected]>
--- arch/arm/mach-lpc32xx/Kconfig | 4 -- board/timll/devkit3250/Kconfig | 12 ---- board/timll/devkit3250/MAINTAINERS | 6 -- board/timll/devkit3250/Makefile | 7 -- board/timll/devkit3250/devkit3250.c | 83 ---------------------- board/timll/devkit3250/devkit3250_spl.c | 66 ----------------- configs/devkit3250_defconfig | 93 ------------------------ include/configs/devkit3250.h | 94 ------------------------- 8 files changed, 365 deletions(-) delete mode 100644 board/timll/devkit3250/Kconfig delete mode 100644 board/timll/devkit3250/MAINTAINERS delete mode 100644 board/timll/devkit3250/Makefile delete mode 100644 board/timll/devkit3250/devkit3250.c delete mode 100644 board/timll/devkit3250/devkit3250_spl.c delete mode 100644 configs/devkit3250_defconfig delete mode 100644 include/configs/devkit3250.h
arch/arm/mach-lpc32xx/Kconfig +0 -4
@@ -6,9 +6,6 @@ config SYS_SOC choice prompt "NXP LPC32xx board select" -config TARGET_DEVKIT3250 - bool "Timll DevKit3250" - config TARGET_WORK_92105 bool "Work Microwave Work_92105"
@@ -17,7 +14,6 @@ config TARGET_EA_LPC3250DEVKITV2 endchoice -source "board/timll/devkit3250/Kconfig" source "board/work-microwave/work_92105/Kconfig" source "board/ea/ea-lpc3250devkitv2/Kconfig"
board/timll/devkit3250/Kconfig deleted +0 -12
@@ -1,12 +0,0 @@ -if TARGET_DEVKIT3250 - -config SYS_BOARD - default "devkit3250" - -config SYS_VENDOR - default "timll" - -config SYS_CONFIG_NAME - default "devkit3250" - -endif
board/timll/devkit3250/MAINTAINERS deleted +0 -6
@@ -1,6 +0,0 @@ -DEVKIT3250 BOARD -M: Vladimir Zapolskiy <[email protected]> -S: Maintained -F: board/timll/devkit3250/ -F: include/configs/devkit3250.h -F: configs/devkit3250_defconfig
board/timll/devkit3250/Makefile deleted +0 -7
@@ -1,7 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Copyright (C) 2011 by Vladimir Zapolskiy <[email protected]> -# Copyright (C) 2008, Guennadi Liakhovetski <[email protected]> - -obj-y := devkit3250.o -obj-$(CONFIG_SPL_BUILD) += devkit3250_spl.o
board/timll/devkit3250/devkit3250.c deleted +0 -83
83 lines not on this page · raw message
board/timll/devkit3250/devkit3250_spl.c deleted +0 -66
66 lines not on this page · raw message
configs/devkit3250_defconfig deleted +0 -93
93 lines not on this page · raw message
include/configs/devkit3250.h deleted +0 -94
94 lines not on this page · raw message
Signature · 1 line
2.34.1
PATCH 5/5 arm: Remove omap3_beagle board
In reply to Tom RiniThis board has not been converted to CONFIG_DM_I2C by the deadline. Remove it.
---
Cc: Robert Nelson <[email protected]>
--- arch/arm/dts/Makefile | 5 - arch/arm/dts/omap3-beagle-u-boot.dtsi | 14 - arch/arm/dts/omap3-beagle-xm-ab-u-boot.dtsi | 14 - arch/arm/dts/omap3-beagle-xm-ab.dts | 13 - arch/arm/dts/omap3-beagle-xm-u-boot.dtsi | 14 - arch/arm/dts/omap3-beagle-xm.dts | 406 --------------- arch/arm/dts/omap3-beagle.dts | 433 ---------------- arch/arm/mach-omap2/omap3/Kconfig | 10 - board/beagle/beagle/Kconfig | 12 - board/beagle/beagle/MAINTAINERS | 6 - board/beagle/beagle/Makefile | 7 - board/beagle/beagle/beagle.c | 503 ------------------ board/beagle/beagle/beagle.h | 545 -------------------- board/beagle/beagle/led.c | 70 --- configs/omap3_beagle_defconfig | 115 ----- include/configs/omap3_beagle.h | 200 ------- 16 files changed, 2367 deletions(-) delete mode 100644 arch/arm/dts/omap3-beagle-u-boot.dtsi delete mode 100644 arch/arm/dts/omap3-beagle-xm-ab-u-boot.dtsi delete mode 100644 arch/arm/dts/omap3-beagle-xm-ab.dts delete mode 100644 arch/arm/dts/omap3-beagle-xm-u-boot.dtsi delete mode 100644 arch/arm/dts/omap3-beagle-xm.dts delete mode 100644 arch/arm/dts/omap3-beagle.dts delete mode 100644 board/beagle/beagle/Kconfig delete mode 100644 board/beagle/beagle/MAINTAINERS delete mode 100644 board/beagle/beagle/Makefile delete mode 100644 board/beagle/beagle/beagle.c delete mode 100644 board/beagle/beagle/beagle.h delete mode 100644 board/beagle/beagle/led.c delete mode 100644 configs/omap3_beagle_defconfig delete mode 100644 include/configs/omap3_beagle.h
arch/arm/dts/Makefile +0 -5
@@ -1010,11 +1010,6 @@ dtb-$(CONFIG_TARGET_OMAP3_EVM) += \ omap3-evm-37xx.dtb \ omap3-evm.dtb -dtb-$(CONFIG_TARGET_OMAP3_BEAGLE) += \ - omap3-beagle-xm-ab.dtb \ - omap3-beagle-xm.dtb \ - omap3-beagle.dtb - dtb-$(CONFIG_TARGET_DEVKIT8000) += omap3-devkit8000.dtb dtb-$(CONFIG_TARGET_SAMA7G5EK) += \
arch/arm/dts/omap3-beagle-u-boot.dtsi deleted +0 -14
@@ -1,14 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * U-Boot additions - * - * (C) Copyright 2017 Derald D. Woods <[email protected]> - */ - -#include "omap3-u-boot.dtsi" - -/ { - chosen { - stdout-path = &uart3; - }; -};
arch/arm/dts/omap3-beagle-xm-ab-u-boot.dtsi deleted +0 -14
@@ -1,14 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * U-Boot additions - * - * (C) Copyright 2017 Derald D. Woods <[email protected]> - */ - -#include "omap3-u-boot.dtsi" - -/ { - chosen { - stdout-path = &uart3; - }; -};
arch/arm/dts/omap3-beagle-xm-ab.dts deleted +0 -13
@@ -1,13 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/ - */ - -#include "omap3-beagle-xm.dts" - -/ { - /* HS USB Port 2 Power enable was inverted with the xM C */ - hsusb2_power: hsusb2_power_reg { - enable-active-high; - }; -};
arch/arm/dts/omap3-beagle-xm-u-boot.dtsi deleted +0 -14
@@ -1,14 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * U-Boot additions - * - * (C) Copyright 2017 Derald D. Woods <[email protected]> - */ - -#include "omap3-u-boot.dtsi" - -/ { - chosen { - stdout-path = &uart3; - }; -};
arch/arm/dts/omap3-beagle-xm.dts deleted +0 -406
406 lines not on this page · raw message
arch/arm/dts/omap3-beagle.dts deleted +0 -433
433 lines not on this page · raw message
arch/arm/mach-omap2/omap3/Kconfig +0 -10
@@ -34,15 +34,6 @@ config TARGET_AM3517_EVM select DM_SERIAL imply CMD_DM -config TARGET_OMAP3_BEAGLE - bool "TI OMAP3 BeagleBoard" - select DM - select DM_GPIO - select DM_SERIAL - select OMAP3_GPIO_5 - select OMAP3_GPIO_6 - imply CMD_DM - config TARGET_CM_T35 bool "CompuLab CM-T3530 and CM-T3730 boards" select OMAP3_GPIO_2
@@ -153,7 +144,6 @@ config SYS_SOC default "omap3" source "board/logicpd/am3517evm/Kconfig" -source "board/beagle/beagle/Kconfig" source "board/timll/devkit8000/Kconfig" source "board/ti/omap3evm/Kconfig" source "board/isee/igep00x0/Kconfig"
board/beagle/beagle/Kconfig deleted +0 -12
@@ -1,12 +0,0 @@ -if TARGET_OMAP3_BEAGLE - -config SYS_BOARD - default "beagle" - -config SYS_VENDOR - default "beagle" - -config SYS_CONFIG_NAME - default "omap3_beagle" - -endif
board/beagle/beagle/MAINTAINERS deleted +0 -6
@@ -1,6 +0,0 @@ -BEAGLE BOARD -M: Tom Rini <[email protected]> -S: Maintained -F: board/beagle/beagle/ -F: include/configs/omap3_beagle.h -F: configs/omap3_beagle_defconfig
board/beagle/beagle/Makefile deleted +0 -7
@@ -1,7 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# (C) Copyright 2000, 2001, 2002 -# Wolfgang Denk, DENX Software Engineering, [email protected]. - -obj-y := beagle.o -obj-$(CONFIG_LED_STATUS) += led.o
board/beagle/beagle/beagle.c deleted +0 -503
503 lines not on this page · raw message
board/beagle/beagle/beagle.h deleted +0 -545
545 lines not on this page · raw message
board/beagle/beagle/led.c deleted +0 -70
70 lines not on this page · raw message
configs/omap3_beagle_defconfig deleted +0 -115
115 lines not on this page · raw message
include/configs/omap3_beagle.h deleted +0 -200
200 lines not on this page · raw message
Signature · 1 line
2.34.1
Re: [PATCH 5/5] arm: Remove omap3_beagle board
Quoted 5 lines · Tom Rini
This board has not been converted to
CONFIG_DM_I2Cby the deadline. Remove it.Signed-off-by Tom Rini <[email protected]>
It has to be done, has not been converted, if any active real users want to bring this back, it can be reverted.
Looking at the remaining armhf distros:
Buildroot; not in git tree
Arch Linux; 2016.11-1
Debian; 2024.01
CC'ing Vagrant Debian's u-boot maintainer..
Regards,
Signature · 2 lines
Robert Nelson https://rcn-ee.com/
Quoted 5 lines · Tom Rini
This board has not been converted to
CONFIG_DM_I2Cby the deadline. Remove it.Signed-off-by Tom Rini <[email protected]>
It has to be done, has not been converted, if any active real users want to bring this back, it can be reverted.
This was also a fun board, as not every hardware revision had a matching ID change, and ES changed to incompatible memory mid cycle.. Watching from a fair we learned a lot for future Beagle's..
Looking at the remaining armhf distros:
Buildroot; 2021.04
Arch Linux; 2017.07-1
Debian; 2024.01
CC'ing Vagrant Debian's u-boot maintainer..
Regards,
Signature · 2 lines
Robert Nelson https://rcn-ee.com/
Hi Tom,
Quoted 21 lines · Tom Rini
This board has not been converted to
CONFIG_DM_I2Cby the deadline. Remove it.Signed-off-by Tom Rini <[email protected]>--- arch/arm/dts/Makefile | 4 - arch/arm/dts/omap4-panda-common.dtsi | 573 --------------------------- arch/arm/dts/omap4-panda-es.dts | 82 ---- arch/arm/dts/omap4-panda.dts | 13 - arch/arm/mach-omap2/omap4/Kconfig | 4 - board/ti/panda/Kconfig | 14 - board/ti/panda/MAINTAINERS | 6 - board/ti/panda/Makefile | 6 - board/ti/panda/panda.c | 322 --------------- board/ti/panda/panda_mux_data.h | 86 ---- configs/omap4_panda_defconfig | 54 --- include/configs/omap4_panda.h | 16 - 12 files changed, 1180 deletions(-) delete mode 100644 arch/arm/dts/omap4-panda-common.dtsi delete mode 100644 arch/arm/dts/omap4-panda-es.dts
Quoted 8 lines
delete mode 100644 arch/arm/dts/omap4-panda.dts delete mode 100644 board/ti/panda/Kconfig delete mode 100644 board/ti/panda/MAINTAINERS delete mode 100644 board/ti/panda/Makefile delete mode 100644 board/ti/panda/panda.c delete mode 100644 board/ti/panda/panda_mux_data.h delete mode 100644 configs/omap4_panda_defconfig delete mode 100644 include/configs/omap4_panda.h
I'm very pleased to see this.
I happened to be looking at i2c deprecation (yet again!) the other day. I found the generation *before* the legacy SYS_I2C feature.
I will see if I can get it building, then send a series.
For SPL, I am thinking we may need a 'tiny' i2c a bit like the tiny mmc, e.g. supporting a single controller and simple read/write. I have never really looked at it in any detail as there is too much cruft in there.
Regards,
Simon