Skip to contentSkip to conversation

spi: imx: Don't expect DMA for i.MX{25,35,50,51,53} cspi devices

PATCH New Sasha Levin 1 participant 11 messages Jul 16, 2024

Subsystems (10)
lore
Share & tools
lore

Sasha Levin

author maintainer
#0 lore raw

PATCH 1/11 spi: imx: Don't expect DMA for i.MX{25,35,50,51,53} cspi devices

From: Uwe Kleine-König <[email protected]>

[ Upstream commit ce1dac560a74220f2e53845ec0723b562288aed4 ]

While in commit 2dd33f9cec90 ("spi: imx: support DMA for imx35") it was claimed that DMA works on i.MX25, i.MX31 and i.MX35 the respective device trees don't add DMA channels. The Reference manuals of i.MX31 and i.MX25 also don't mention the CSPI core being DMA capable. (I didn't check the others.)

Since commit e267a5b3ec59 ("spi: spi-imx: Use dev_err_probe for failed DMA channel requests") this results in an error message

spi_imx 43fa4000.spi: error -ENODEV: can't get the TX DMA channel!

during boot. However that isn't fatal and the driver gets loaded just fine, just without using DMA.

---
 drivers/spi/spi-imx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/spi/spi-imx.c +1 -1
index 09b6c1b45f1a1..09c676e50fe0e 100644
@@ -1050,7 +1050,7 @@ static struct spi_imx_devtype_data imx35_cspi_devtype_data = {
 	.rx_available = mx31_rx_available,
 	.reset = mx31_reset,
 	.fifo_size = 8,
-	.has_dmamode = true,
+	.has_dmamode = false,
 	.dynamic_burst = false,
 	.has_targetmode = false,
 	.devtype = IMX35_CSPI,
Signature · 1 line
2.43.0
author maintainer
#1 lore raw

PATCH 2/11 spi: davinci: Unset POWERDOWN bit when releasing resources

From: Bastien Curutchet <[email protected]>

[ Upstream commit 1762dc01fc78ef5f19693e9317eae7491c6c7e1b ]

On the OMAPL138, the SPI reference clock is provided by the Power and Sleep Controller (PSC). The PSC's datasheet says that 'some peripherals have special programming requirements and additional recommended steps you must take before you can invoke the PSC module state transition'. I didn't find more details in documentation but it appears that PSC needs the SPI to clear the POWERDOWN bit before disabling the clock. Indeed, when this bit is set, the PSC gets stuck in transitions from enable to disable state.

Clear the POWERDOWN bit when releasing driver's resources

---
 drivers/spi/spi-davinci.c | 6 ++++++
 1 file changed, 6 insertions(+)
drivers/spi/spi-davinci.c +6 -0
index be3998104bfbb..f7e8b5efa50e5 100644
@@ -984,6 +984,9 @@ static int davinci_spi_probe(struct platform_device *pdev)
 	return ret;
 
 free_dma:
+	/* This bit needs to be cleared to disable dpsi->clk */
+	clear_io_bits(dspi->base + SPIGCR1, SPIGCR1_POWERDOWN_MASK);
+
 	if (dspi->dma_rx) {
 		dma_release_channel(dspi->dma_rx);
 		dma_release_channel(dspi->dma_tx);
@@ -1013,6 +1016,9 @@ static void davinci_spi_remove(struct platform_device *pdev)
 
 	spi_bitbang_stop(&dspi->bitbang);
 
+	/* This bit needs to be cleared to disable dpsi->clk */
+	clear_io_bits(dspi->base + SPIGCR1, SPIGCR1_POWERDOWN_MASK);
+
 	if (dspi->dma_rx) {
 		dma_release_channel(dspi->dma_rx);
 		dma_release_channel(dspi->dma_tx);
Signature · 1 line
2.43.0
author maintainer
#2 lore raw

PATCH 3/11 cachefiles: stop sending new request when dropping object

In reply to Sasha Levin

From: Baokun Li <[email protected]>

[ Upstream commit b2415d1f4566b6939acacc69637eaa57815829c1 ]

Added CACHEFILES_ONDEMAND_OBJSTATE_DROPPING indicates that the cachefiles object is being dropped, and is set after the close request for the dropped object completes, and no new requests are allowed to be sent after this state.

This prepares for the later addition of cancel_work_sync(). It prevents leftover reopen requests from being sent, to avoid processing unnecessary requests and to avoid cancel_work_sync() blocking by waiting for daemon to complete the reopen requests.

---
 fs/cachefiles/internal.h |  2 ++
 fs/cachefiles/ondemand.c | 10 ++++++++--
 2 files changed, 10 insertions(+), 2 deletions(-)
fs/cachefiles/internal.h +2 -0
index 6845a90cdfcce..a1a1d25e95147 100644
@@ -48,6 +48,7 @@ enum cachefiles_object_state {
 	CACHEFILES_ONDEMAND_OBJSTATE_CLOSE, /* Anonymous fd closed by daemon or initial state */
 	CACHEFILES_ONDEMAND_OBJSTATE_OPEN, /* Anonymous fd associated with object is available */
 	CACHEFILES_ONDEMAND_OBJSTATE_REOPENING, /* Object that was closed and is being reopened. */
+	CACHEFILES_ONDEMAND_OBJSTATE_DROPPING, /* Object is being dropped. */
 };
 
 struct cachefiles_ondemand_info {
@@ -335,6 +336,7 @@ cachefiles_ondemand_set_object_##_state(struct cachefiles_object *object) \
 CACHEFILES_OBJECT_STATE_FUNCS(open, OPEN);
 CACHEFILES_OBJECT_STATE_FUNCS(close, CLOSE);
 CACHEFILES_OBJECT_STATE_FUNCS(reopening, REOPENING);
+CACHEFILES_OBJECT_STATE_FUNCS(dropping, DROPPING);
 
 static inline bool cachefiles_ondemand_is_reopening_read(struct cachefiles_req *req)
 {
fs/cachefiles/ondemand.c +8 -2
index 89f118d68d125..14f91a9fbe447 100644
@@ -494,7 +494,8 @@ static int cachefiles_ondemand_send_req(struct cachefiles_object *object,
 		 */
 		xas_lock(&xas);
 
-		if (test_bit(CACHEFILES_DEAD, &cache->flags)) {
+		if (test_bit(CACHEFILES_DEAD, &cache->flags) ||
+		    cachefiles_ondemand_object_is_dropping(object)) {
 			xas_unlock(&xas);
 			ret = -EIO;
 			goto out;
@@ -535,7 +536,8 @@ static int cachefiles_ondemand_send_req(struct cachefiles_object *object,
 	 * If error occurs after creating the anonymous fd,
 	 * cachefiles_ondemand_fd_release() will set object to close.
 	 */
-	if (opcode == CACHEFILES_OP_OPEN)
+	if (opcode == CACHEFILES_OP_OPEN &&
+	    !cachefiles_ondemand_object_is_dropping(object))
 		cachefiles_ondemand_set_object_close(object);
 	kfree(req);
 	return ret;
@@ -634,8 +636,12 @@ int cachefiles_ondemand_init_object(struct cachefiles_object *object)
 
 void cachefiles_ondemand_clean_object(struct cachefiles_object *object)
 {
+	if (!object->ondemand)
+		return;
+
 	cachefiles_ondemand_send_req(object, CACHEFILES_OP_CLOSE, 0,
 			cachefiles_ondemand_init_close_req, NULL);
+	cachefiles_ondemand_set_object_dropping(object);
 }
 
 int cachefiles_ondemand_init_obj_info(struct cachefiles_object *object,
Signature · 1 line
2.43.0
author maintainer
#3 lore raw

PATCH 4/11 cachefiles: cancel all requests for the object that is being dropped

In reply to Sasha Levin

From: Baokun Li <[email protected]>

[ Upstream commit 751f524635a4f076117d714705eeddadaf6748ee ]

Because after an object is dropped, requests for that object are useless, cancel them to avoid causing other problems.

This prepares for the later addition of cancel_work_sync(). After the reopen requests is generated, cancel it to avoid cancel_work_sync() blocking by waiting for daemon to complete the reopen requests.

---
 fs/cachefiles/ondemand.c | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)
fs/cachefiles/ondemand.c +19 -0
index 14f91a9fbe447..1c0fa7412a6fa 100644
@@ -636,12 +636,31 @@ int cachefiles_ondemand_init_object(struct cachefiles_object *object)
 
 void cachefiles_ondemand_clean_object(struct cachefiles_object *object)
 {
+	unsigned long index;
+	struct cachefiles_req *req;
+	struct cachefiles_cache *cache;
+
 	if (!object->ondemand)
 		return;
 
 	cachefiles_ondemand_send_req(object, CACHEFILES_OP_CLOSE, 0,
 			cachefiles_ondemand_init_close_req, NULL);
+
+	if (!object->ondemand->ondemand_id)
+		return;
+
+	/* Cancel all requests for the object that is being dropped. */
+	cache = object->volume->cache;
+	xa_lock(&cache->reqs);
 	cachefiles_ondemand_set_object_dropping(object);
+	xa_for_each(&cache->reqs, index, req) {
+		if (req->object == object) {
+			req->error = -EIO;
+			complete(&req->done);
+			__xa_erase(&cache->reqs, index);
+		}
+	}
+	xa_unlock(&cache->reqs);
 }
 
 int cachefiles_ondemand_init_obj_info(struct cachefiles_object *object,
Signature · 1 line
2.43.0
author maintainer
#4 lore raw

PATCH 5/11 ksmbd: return FILE_DEVICE_DISK instead of super magic

In reply to Sasha Levin

From: Namjae Jeon <[email protected]>

[ Upstream commit 25a6e135569b3901452e4863c94560df7c11c492 ]

MS-SMB2 specification describes setting ->DeviceType to FILE_DEVICE_DISK or FILE_DEVICE_CD_ROM. Set FILE_DEVICE_DISK instead of super magic in FS_DEVICE_INFORMATION. And Set FILE_READ_ONLY_DEVICE for read-only share.

---
 fs/smb/common/smb2pdu.h | 34 ++++++++++++++++++++++++++++++++++
 fs/smb/server/smb2pdu.c |  9 +++++++--
 2 files changed, 41 insertions(+), 2 deletions(-)
fs/smb/common/smb2pdu.h +34 -0
index 202ff91281560..694d2b4a4ad99 100644
@@ -917,6 +917,40 @@ struct smb2_query_directory_rsp {
 	__u8   Buffer[];
 } __packed;
 
+/* DeviceType Flags */
+#define FILE_DEVICE_CD_ROM              0x00000002
+#define FILE_DEVICE_CD_ROM_FILE_SYSTEM  0x00000003
+#define FILE_DEVICE_DFS                 0x00000006
+#define FILE_DEVICE_DISK                0x00000007
+#define FILE_DEVICE_DISK_FILE_SYSTEM    0x00000008
+#define FILE_DEVICE_FILE_SYSTEM         0x00000009
+#define FILE_DEVICE_NAMED_PIPE          0x00000011
+#define FILE_DEVICE_NETWORK             0x00000012
+#define FILE_DEVICE_NETWORK_FILE_SYSTEM 0x00000014
+#define FILE_DEVICE_NULL                0x00000015
+#define FILE_DEVICE_PARALLEL_PORT       0x00000016
+#define FILE_DEVICE_PRINTER             0x00000018
+#define FILE_DEVICE_SERIAL_PORT         0x0000001b
+#define FILE_DEVICE_STREAMS             0x0000001e
+#define FILE_DEVICE_TAPE                0x0000001f
+#define FILE_DEVICE_TAPE_FILE_SYSTEM    0x00000020
+#define FILE_DEVICE_VIRTUAL_DISK        0x00000024
+#define FILE_DEVICE_NETWORK_REDIRECTOR  0x00000028
+
+/* Device Characteristics */
+#define FILE_REMOVABLE_MEDIA			0x00000001
+#define FILE_READ_ONLY_DEVICE			0x00000002
+#define FILE_FLOPPY_DISKETTE			0x00000004
+#define FILE_WRITE_ONCE_MEDIA			0x00000008
+#define FILE_REMOTE_DEVICE			0x00000010
+#define FILE_DEVICE_IS_MOUNTED			0x00000020
+#define FILE_VIRTUAL_VOLUME			0x00000040
+#define FILE_DEVICE_SECURE_OPEN			0x00000100
+#define FILE_CHARACTERISTIC_TS_DEVICE		0x00001000
+#define FILE_CHARACTERISTIC_WEBDAV_DEVICE	0x00002000
+#define FILE_PORTABLE_DEVICE			0x00004000
+#define FILE_DEVICE_ALLOW_APPCONTAINER_TRAVERSAL 0x00020000
+
 /*
  * Maximum number of iovs we need for a set-info request.
  * The largest one is rename/hardlink
fs/smb/server/smb2pdu.c +7 -2
index e7e07891781b3..786cd45fe18f1 100644
@@ -5314,8 +5314,13 @@ static int smb2_get_info_filesystem(struct ksmbd_work *work,
 
 		info = (struct filesystem_device_info *)rsp->Buffer;
 
-		info->DeviceType = cpu_to_le32(stfs.f_type);
-		info->DeviceCharacteristics = cpu_to_le32(0x00000020);
+		info->DeviceType = cpu_to_le32(FILE_DEVICE_DISK);
+		info->DeviceCharacteristics =
+			cpu_to_le32(FILE_DEVICE_IS_MOUNTED);
+		if (!test_tree_conn_flag(work->tcon,
+					 KSMBD_TREE_CONN_FLAG_WRITABLE))
+			info->DeviceCharacteristics |=
+				cpu_to_le32(FILE_READ_ONLY_DEVICE);
 		rsp->OutputBufferLength = cpu_to_le32(8);
 		break;
 	}
Signature · 1 line
2.43.0
author maintainer
#5 lore raw

PATCH 6/11 ASoC: SOF: Intel: hda-pcm: Limit the maximum number of periods by MAX_BDL_ENTRIES

In reply to Sasha Levin

From: Peter Ujfalusi <[email protected]>

[ Upstream commit 82bb8db96610b558920b8c57cd250ec90567d79b ]

The HDaudio specification Section 3.6.2 limits the number of BDL entries to 256.

Make sure we don't allow more periods than this normative value.

---
 sound/soc/sof/intel/hda-pcm.c | 6 ++++++
 1 file changed, 6 insertions(+)
sound/soc/sof/intel/hda-pcm.c +6 -0
index d7b446f3f973e..8b5fbbc777bd4 100644
@@ -254,6 +254,12 @@ int hda_dsp_pcm_open(struct snd_sof_dev *sdev,
 	snd_pcm_hw_constraint_integer(substream->runtime,
 				      SNDRV_PCM_HW_PARAM_PERIODS);
 
+	/* Limit the maximum number of periods to not exceed the BDL entries count */
+	if (runtime->hw.periods_max > HDA_DSP_MAX_BDL_ENTRIES)
+		snd_pcm_hw_constraint_minmax(runtime, SNDRV_PCM_HW_PARAM_PERIODS,
+					     runtime->hw.periods_min,
+					     HDA_DSP_MAX_BDL_ENTRIES);
+
 	/* Only S16 and S32 supported by HDA hardware when used without DSP */
 	if (sdev->dspless_mode_selected)
 		snd_pcm_hw_constraint_mask64(substream->runtime, SNDRV_PCM_HW_PARAM_FORMAT,
Signature · 1 line
2.43.0
author maintainer
#6 lore raw

PATCH 7/11 selftest/timerns: fix clang build failures for abs() calls

In reply to Sasha Levin

From: John Hubbard <[email protected]>

[ Upstream commit f76f9bc616b7320df6789241ca7d26cedcf03cf3 ]

When building with clang, via:

make LLVM=1 -C tools/testing/selftests

...clang warns about mismatches between the expected and required integer length being supplied to abs(3).

Fix this by using the correct variant of abs(3): labs(3) or llabs(3), in these cases.

---
 tools/testing/selftests/timens/exec.c       | 6 +++---
 tools/testing/selftests/timens/timer.c      | 2 +-
 tools/testing/selftests/timens/timerfd.c    | 2 +-
 tools/testing/selftests/timens/vfork_exec.c | 4 ++--
 4 files changed, 7 insertions(+), 7 deletions(-)
tools/testing/selftests/timens/exec.c +3 -3
index e40dc5be2f668..d12ff955de0d8 100644
@@ -30,7 +30,7 @@ int main(int argc, char *argv[])
 
 		for (i = 0; i < 2; i++) {
 			_gettime(CLOCK_MONOTONIC, &tst, i);
-			if (abs(tst.tv_sec - now.tv_sec) > 5)
+			if (labs(tst.tv_sec - now.tv_sec) > 5)
 				return pr_fail("%ld %ld\n", now.tv_sec, tst.tv_sec);
 		}
 		return 0;
@@ -50,7 +50,7 @@ int main(int argc, char *argv[])
 
 	for (i = 0; i < 2; i++) {
 		_gettime(CLOCK_MONOTONIC, &tst, i);
-		if (abs(tst.tv_sec - now.tv_sec) > 5)
+		if (labs(tst.tv_sec - now.tv_sec) > 5)
 			return pr_fail("%ld %ld\n",
 					now.tv_sec, tst.tv_sec);
 	}
@@ -70,7 +70,7 @@ int main(int argc, char *argv[])
 		/* Check that a child process is in the new timens. */
 		for (i = 0; i < 2; i++) {
 			_gettime(CLOCK_MONOTONIC, &tst, i);
-			if (abs(tst.tv_sec - now.tv_sec - OFFSET) > 5)
+			if (labs(tst.tv_sec - now.tv_sec - OFFSET) > 5)
 				return pr_fail("%ld %ld\n",
 						now.tv_sec + OFFSET, tst.tv_sec);
 		}
tools/testing/selftests/timens/timer.c +1 -1
index 5e7f0051bd7be..5b939f59dfa4d 100644
@@ -56,7 +56,7 @@ int run_test(int clockid, struct timespec now)
 			return pr_perror("timerfd_gettime");
 
 		elapsed = new_value.it_value.tv_sec;
-		if (abs(elapsed - 3600) > 60) {
+		if (llabs(elapsed - 3600) > 60) {
 			ksft_test_result_fail("clockid: %d elapsed: %lld\n",
 					      clockid, elapsed);
 			return 1;
tools/testing/selftests/timens/timerfd.c +1 -1
index 9edd43d6b2c13..a4196bbd6e33f 100644
@@ -61,7 +61,7 @@ int run_test(int clockid, struct timespec now)
 			return pr_perror("timerfd_gettime(%d)", clockid);
 
 		elapsed = new_value.it_value.tv_sec;
-		if (abs(elapsed - 3600) > 60) {
+		if (llabs(elapsed - 3600) > 60) {
 			ksft_test_result_fail("clockid: %d elapsed: %lld\n",
 					      clockid, elapsed);
 			return 1;
tools/testing/selftests/timens/vfork_exec.c +2 -2
index beb7614941fb1..5b8907bf451dd 100644
@@ -32,7 +32,7 @@ static void *tcheck(void *_args)
 
 	for (i = 0; i < 2; i++) {
 		_gettime(CLOCK_MONOTONIC, &tst, i);
-		if (abs(tst.tv_sec - now->tv_sec) > 5) {
+		if (labs(tst.tv_sec - now->tv_sec) > 5) {
 			pr_fail("%s: in-thread: unexpected value: %ld (%ld)\n",
 				args->tst_name, tst.tv_sec, now->tv_sec);
 			return (void *)1UL;
@@ -64,7 +64,7 @@ static int check(char *tst_name, struct timespec *now)
 
 	for (i = 0; i < 2; i++) {
 		_gettime(CLOCK_MONOTONIC, &tst, i);
-		if (abs(tst.tv_sec - now->tv_sec) > 5)
+		if (labs(tst.tv_sec - now->tv_sec) > 5)
 			return pr_fail("%s: unexpected value: %ld (%ld)\n",
 					tst_name, tst.tv_sec, now->tv_sec);
 	}
Signature · 1 line
2.43.0
author maintainer
#7 lore raw

PATCH 8/11 selftests/vDSO: fix clang build errors and warnings

In reply to Sasha Levin

From: John Hubbard <[email protected]>

[ Upstream commit 73810cd45b99c6c418e1c6a487b52c1e74edb20d ]

When building with clang, via:

make LLVM=1 -C tools/testing/selftests

...there are several warnings, and an error. This fixes all of those and allows these tests to run and pass.

1. Fix linker error (undefined reference to memcpy) by providing a local version of memcpy.

2. clang complains about using this form:

    if (g = h & 0xf0000000)

...so factor out the assignment into a separate step.

3. The code is passing a signed const char* to elf_hash(), which expects a const unsigned char *. There are several callers, so fix this at the source by allowing the function to accept a signed argument, and then converting to unsigned operations, once inside the function.

4. clang doesn't have __attribute__((externally_visible)) and generates a warning to that effect. Fortunately, gcc 12 and gcc 13 do not seem to require that attribute in order to build, run and pass tests here, so remove it.

---
 tools/testing/selftests/vDSO/parse_vdso.c      | 16 +++++++++++-----
 .../selftests/vDSO/vdso_standalone_test_x86.c  | 18 ++++++++++++++++--
 2 files changed, 27 insertions(+), 7 deletions(-)
tools/testing/selftests/vDSO/parse_vdso.c +11 -5
index 413f75620a35b..4ae417372e9eb 100644
@@ -55,14 +55,20 @@ static struct vdso_info
 	ELF(Verdef) *verdef;
 } vdso_info;
 
-/* Straight from the ELF specification. */
-static unsigned long elf_hash(const unsigned char *name)
+/*
+ * Straight from the ELF specification...and then tweaked slightly, in order to
+ * avoid a few clang warnings.
+ */
+static unsigned long elf_hash(const char *name)
 {
 	unsigned long h = 0, g;
-	while (*name)
+	const unsigned char *uch_name = (const unsigned char *)name;
+
+	while (*uch_name)
 	{
-		h = (h << 4) + *name++;
-		if (g = h & 0xf0000000)
+		h = (h << 4) + *uch_name++;
+		g = h & 0xf0000000;
+		if (g)
 			h ^= g >> 24;
 		h &= ~g;
 	}
tools/testing/selftests/vDSO/vdso_standalone_test_x86.c +16 -2
index 8a44ff973ee17..27f6fdf119691 100644
@@ -18,7 +18,7 @@
 
 #include "parse_vdso.h"
 
-/* We need a libc functions... */
+/* We need some libc functions... */
 int strcmp(const char *a, const char *b)
 {
 	/* This implementation is buggy: it never returns -1. */
@@ -34,6 +34,20 @@ int strcmp(const char *a, const char *b)
 	return 0;
 }
 
+/*
+ * The clang build needs this, although gcc does not.
+ * Stolen from lib/string.c.
+ */
+void *memcpy(void *dest, const void *src, size_t count)
+{
+	char *tmp = dest;
+	const char *s = src;
+
+	while (count--)
+		*tmp++ = *s++;
+	return dest;
+}
+
 /* ...and two syscalls.  This is x86-specific. */
 static inline long x86_syscall3(long nr, long a0, long a1, long a2)
 {
@@ -70,7 +84,7 @@ void to_base10(char *lastdig, time_t n)
 	}
 }
 
-__attribute__((externally_visible)) void c_main(void **stack)
+void c_main(void **stack)
 {
 	/* Parse the stack */
 	long argc = (long)*stack;
Signature · 1 line
2.43.0
author maintainer
#8 lore raw

PATCH 9/11 hfsplus: fix uninit-value in copy_name

In reply to Sasha Levin

From: Edward Adam Davis <[email protected]>

[ Upstream commit 0570730c16307a72f8241df12363f76600baf57d ]

[syzbot reported]

BUG: KMSAN: uninit-value in sized_strscpy+0xc4/0x160
 sized_strscpy+0xc4/0x160
 copy_name+0x2af/0x320 fs/hfsplus/xattr.c:411
 hfsplus_listxattr+0x11e9/0x1a50 fs/hfsplus/xattr.c:750
 vfs_listxattr fs/xattr.c:493 [inline]
 listxattr+0x1f3/0x6b0 fs/xattr.c:840
 path_listxattr fs/xattr.c:864 [inline]
 __do_sys_listxattr fs/xattr.c:876 [inline]
 __se_sys_listxattr fs/xattr.c:873 [inline]
 __x64_sys_listxattr+0x16b/0x2f0 fs/xattr.c:873
 x64_sys_call+0x2ba0/0x3b50 arch/x86/include/generated/asm/syscalls_64.h:195
 do_syscall_x64 arch/x86/entry/common.c:52 [inline]
 do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x77/0x7f

Uninit was created at:

 slab_post_alloc_hook mm/slub.c:3877 [inline]
 slab_alloc_node mm/slub.c:3918 [inline]
 kmalloc_trace+0x57b/0xbe0 mm/slub.c:4065
 kmalloc include/linux/slab.h:628 [inline]
 hfsplus_listxattr+0x4cc/0x1a50 fs/hfsplus/xattr.c:699
 vfs_listxattr fs/xattr.c:493 [inline]
 listxattr+0x1f3/0x6b0 fs/xattr.c:840
 path_listxattr fs/xattr.c:864 [inline]
 __do_sys_listxattr fs/xattr.c:876 [inline]
 __se_sys_listxattr fs/xattr.c:873 [inline]
 __x64_sys_listxattr+0x16b/0x2f0 fs/xattr.c:873
 x64_sys_call+0x2ba0/0x3b50 arch/x86/include/generated/asm/syscalls_64.h:195
 do_syscall_x64 arch/x86/entry/common.c:52 [inline]
 do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x77/0x7f

[Fix]
When allocating memory to strbuf, initialize memory to 0.

---
 fs/hfsplus/xattr.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
fs/hfsplus/xattr.c +1 -1
index 9c9ff6b8c6f7e..858029b1c1735 100644
@@ -698,7 +698,7 @@ ssize_t hfsplus_listxattr(struct dentry *dentry, char *buffer, size_t size)
 		return err;
 	}
 
-	strbuf = kmalloc(NLS_MAX_CHARSET_SIZE * HFSPLUS_ATTR_MAX_STRLEN +
+	strbuf = kzalloc(NLS_MAX_CHARSET_SIZE * HFSPLUS_ATTR_MAX_STRLEN +
 			XATTR_MAC_OSX_PREFIX_LEN + 1, GFP_KERNEL);
 	if (!strbuf) {
 		res = -ENOMEM;
Signature · 1 line
2.43.0
author maintainer
#9 lore raw

PATCH 10/11 selftests/bpf: Extend tcx tests to cover late tcx_entry release

In reply to Sasha Levin

From: Daniel Borkmann <[email protected]>

[ Upstream commit 5f1d18de79180deac2822c93e431bbe547f7d3ce ]

Add a test case which replaces an active ingress qdisc while keeping the miniq in-tact during the transition period to the new clsact qdisc.

  # ./vmtest.sh -- ./test_progs -t tc_link
  [...]
  ./test_progs -t tc_link
  [    3.412871] bpf_testmod: loading out-of-tree module taints kernel.
  [    3.413343] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel
  #332     tc_links_after:OK
  #333     tc_links_append:OK
  #334     tc_links_basic:OK
  #335     tc_links_before:OK
  #336     tc_links_chain_classic:OK
  #337     tc_links_chain_mixed:OK
  #338     tc_links_dev_chain0:OK
  #339     tc_links_dev_cleanup:OK
  #340     tc_links_dev_mixed:OK
  #341     tc_links_ingress:OK
  #342     tc_links_invalid:OK
  #343     tc_links_prepend:OK
  #344     tc_links_replace:OK
  #345     tc_links_revision:OK
  Summary: 14/0 PASSED, 0 SKIPPED, 0 FAILED
---
 tools/testing/selftests/bpf/config            |  3 +
 .../selftests/bpf/prog_tests/tc_links.c       | 61 +++++++++++++++++++
 2 files changed, 64 insertions(+)
tools/testing/selftests/bpf/config +3 -0
index 01f241ea2c67b..dec9fd7ebba7f 100644
@@ -53,9 +53,12 @@ CONFIG_MPLS=y
 CONFIG_MPLS_IPTUNNEL=y
 CONFIG_MPLS_ROUTING=y
 CONFIG_MPTCP=y
+CONFIG_NET_ACT_SKBMOD=y
+CONFIG_NET_CLS=y
 CONFIG_NET_CLS_ACT=y
 CONFIG_NET_CLS_BPF=y
 CONFIG_NET_CLS_FLOWER=y
+CONFIG_NET_CLS_MATCHALL=y
 CONFIG_NET_FOU=y
 CONFIG_NET_FOU_IP_TUNNELS=y
 CONFIG_NET_IPGRE=y
tools/testing/selftests/bpf/prog_tests/tc_links.c +61 -0

73 lines not on this page · raw message

Signature · 1 line
2.43.0
author maintainer
#10 lore raw

PATCH 11/11 spi: mux: set ctlr->bits_per_word_mask

In reply to Sasha Levin

From: David Lechner <[email protected]>

[ Upstream commit c8bd922d924bb4ab6c6c488310157d1a27996f31 ]

Like other SPI controller flags, bits_per_word_mask may be used by a peripheral driver, so it needs to reflect the capabilities of the underlying controller.

---
 drivers/spi/spi-mux.c | 1 +
 1 file changed, 1 insertion(+)
drivers/spi/spi-mux.c +1 -0
index bd988f53753e2..0b0dec95e4445 100644
@@ -156,6 +156,7 @@ static int spi_mux_probe(struct spi_device *spi)
 	/* supported modes are the same as our parent's */
 	ctlr->mode_bits = spi->controller->mode_bits;
 	ctlr->flags = spi->controller->flags;
+	ctlr->bits_per_word_mask = spi->controller->bits_per_word_mask;
 	ctlr->transfer_one_message = spi_mux_transfer_one_message;
 	ctlr->setup = spi_mux_setup;
 	ctlr->num_chipselect = mux_control_states(priv->mux);
Signature · 1 line
2.43.0