aspeed: Add boot from eMMC support (AST2600)
v2 cover aspeed: Add boot from eMMC support (AST2600)
Hello,
This series enables boot from eMMC on the rainier-bmc machine, which is the default behavior and also on the AST2600 EVB using a machine option to change the default.
First 6 patches adjust the machine setup and HW strapping to boot from eMMC, the last 2 are for the AST2600 EVB and are optional.
Thanks,
C.
Changes since v1:
- Rebased on upstream, now that the eMMC device model is available
- Rephrased commit logs
- Fixed SCU prefix of bit definitions
- Tuned 'boot-config' and 'boot-partition-size' eMMC properties
Cédric Le Goater (8):
aspeed: Change type of eMMC device
aspeed: Load eMMC first boot area as a boot rom aspeed/scu: Add boot-from-eMMC HW strapping bit for AST2600 SoC
aspeed: Introduce a AspeedSoCClass 'boot_from_emmc' handler
aspeed: Tune eMMC device properties to reflect HW strapping
aspeed: Add boot-from-eMMC HW strapping bit to rainier-bmc machine
aspeed: Introduce a 'hw_strap1' machine attribute
aspeed: Introduce a 'boot-emmc' machine option
docs/system/arm/aspeed.rst | 2 ++ include/hw/arm/aspeed_soc.h | 1 + include/hw/misc/aspeed_scu.h | 4 +++ hw/arm/aspeed.c | 62 +++++++++++++++++++++++++++++++----- hw/arm/aspeed_ast2600.c | 8 +++++ hw/arm/aspeed_soc_common.c | 7 ++++ 6 files changed, 76 insertions(+), 8 deletions(-)
Signature · 1 line
2.45.2
PATCH v2 1/8 aspeed: Change type of eMMC device
From: Cédric Le Goater <[email protected]>
The QEMU device model representing the eMMC device of the machine is currently created with type SD_CARD. Change the type to EMMC now that it is available.
--- hw/arm/aspeed.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)
hw/arm/aspeed.c +5 -4
@@ -327,14 +327,14 @@ void aspeed_board_init_flashes(AspeedSMCState *s, const char *flashtype, } } -static void sdhci_attach_drive (SDHCIState *sdhci,DriveInfo *dinfo) +static void sdhci_attach_drive (SDHCIState *sdhci,DriveInfo *dinfo,bool emmc) {DeviceState *card;if (!dinfo) {return ; } - card =qdev_new (TYPE_SD_CARD ); + card =qdev_new (emmc ?TYPE_EMMC :TYPE_SD_CARD );qdev_prop_set_drive_err (card,"drive" ,blk_by_legacy_dinfo (dinfo), &error_fatal); qdev_realize_and_unref(card,
@@ -436,12 +436,13 @@ static void aspeed_machine_init(MachineState *machine)for (i =0 ; i < bmc->soc->sdhci.num_slots; i++) {sdhci_attach_drive (&bmc->soc->sdhci.slots[i], -drive_get (IF_SD ,0 , i)); +drive_get (IF_SD ,0 , i), false); }if (bmc->soc->emmc.num_slots) {sdhci_attach_drive (&bmc->soc->emmc.slots[0 ], -drive_get (IF_SD ,0 , bmc->soc->sdhci.num_slots)); +drive_get (IF_SD ,0 , bmc->soc->sdhci.num_slots), + true); }if (!bmc->mmio_exec) {
Signature · 1 line
2.45.2
PATCH v2 2/8 aspeed: Load eMMC first boot area as a boot rom
In reply to Cédric Le GoaterFrom: Cédric Le Goater <[email protected]>
The first boot area partition (64K) of the eMMC device should contain an initial boot loader (u-boot SPL). Load it as a ROM only if an eMMC device is available to boot from but no flash device is.
--- hw/arm/aspeed.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)
hw/arm/aspeed.c +5 -3
@@ -364,6 +364,7 @@ static void aspeed_machine_init(MachineState *machine)AspeedMachineClass *amc =ASPEED_MACHINE_GET_CLASS (machine);AspeedSoCClass *sc;int i; +DriveInfo *emmc0 =NULL ; bmc->soc =ASPEED_SOC (object_new (amc->soc_name));object_property_add_child (OBJECT (machine),"soc" ,OBJECT (bmc->soc));
@@ -440,9 +441,8 @@ static void aspeed_machine_init(MachineState *machine) }if (bmc->soc->emmc.num_slots) { -sdhci_attach_drive (&bmc->soc->emmc.slots[0 ], -drive_get (IF_SD ,0 , bmc->soc->sdhci.num_slots), - true); + emmc0 =drive_get (IF_SD ,0 , bmc->soc->sdhci.num_slots); +sdhci_attach_drive (&bmc->soc->emmc.slots[0 ], emmc0, true); }if (!bmc->mmio_exec) {
@@ -452,6 +452,8 @@ static void aspeed_machine_init(MachineState *machine)if (fmc0) {uint64_t rom_size =memory_region_size (&bmc->soc->spi_boot);aspeed_install_boot_rom (bmc, fmc0, rom_size); + }else if (emmc0) { +aspeed_install_boot_rom (bmc,blk_by_legacy_dinfo (emmc0),64 * KiB); } }
Signature · 1 line
2.45.2
Re: [PATCH v2 2/8] aspeed: Load eMMC first boot area as a boot rom
Quoted 6 lines · Cédric Le Goater
From: Cédric Le Goater <[email protected]>
The first boot area partition (64K) of the eMMC device should contain an initial boot loader (u-boot SPL). Load it as a ROM only if an eMMC device is available to boot from but no flash device is.
Quoted 6 lines
Signed-off-by Cédric Le Goater <[email protected]>Reviewed-by Andrew Jeffery <[email protected]>Tested-by Andrew Jeffery <[email protected]>--- hw/arm/aspeed.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)
PATCH v2 3/8 aspeed/scu: Add boot-from-eMMC HW strapping bit for AST2600 SoC
In reply to Cédric Le GoaterFrom: Cédric Le Goater <[email protected]>
Bit SCU500[2] of the AST2600 controls the boot device of the SoC.
Future changes will configure this bit to boot from eMMC disk images specially built for this purpose.
--- include/hw/misc/aspeed_scu.h | 4 ++++ 1 file changed, 4 insertions(+)
include/hw/misc/aspeed_scu.h +4 -0
@@ -349,6 +349,10 @@ uint32_t aspeed_scu_get_apb_freq(AspeedSCUState *s);#define SCU_AST2600_H_PLL_BYPASS_EN (0x1 << 24)#define SCU_AST2600_H_PLL_OFF (0x1 << 23) +/* STRAP1 SCU500 */ +#define SCU_AST2600_HW_STRAP_BOOT_SRC_EMMC (0x1 << 2) +#define SCU_AST2600_HW_STRAP_BOOT_SRC_SPI (0x0 << 2) +/* * SCU310 Clock Selection Register Set 4 (for Aspeed AST1030 SOC) *
Signature · 1 line
2.45.2
PATCH v2 4/8 aspeed: Introduce a AspeedSoCClass 'boot_from_emmc' handler
In reply to Cédric Le GoaterFrom: Cédric Le Goater <[email protected]>
Report support on the AST2600 SoC if the boot-from-eMMC HW strapping bit is set at the board level. AST2700 also has support but it is not yet ready in QEMU and others SoCs do not have support, so return false always for these.
--- include/hw/arm/aspeed_soc.h | 1 + hw/arm/aspeed_ast2600.c | 8 ++++++++ hw/arm/aspeed_soc_common.c | 7 +++++++ 3 files changed, 16 insertions(+)
include/hw/arm/aspeed_soc.h +1 -0
@@ -164,6 +164,7 @@ struct AspeedSoCClass {const hwaddr *memmap;uint32_t num_cpus;qemu_irq (*get_irq)(AspeedSoCState *s,int dev); +bool (*boot_from_emmc)(AspeedSoCState *s); };const char *aspeed_soc_cpu_type (AspeedSoCClass *sc);
hw/arm/aspeed_ast2600.c +8 -0
@@ -646,6 +646,13 @@ static void aspeed_soc_ast2600_realize(DeviceState *dev, Error **errp) } } +static bool aspeed_soc_ast2600_boot_from_emmc (AspeedSoCState *s) +{ +uint32_t hw_strap1 =object_property_get_uint (OBJECT (&s->scu), +"hw-strap1" , &error_abort); +return !!(hw_strap1 &SCU_AST2600_HW_STRAP_BOOT_SRC_EMMC ); +} +static void aspeed_soc_ast2600_class_init (ObjectClass *oc,void *data) {static const char *const valid_cpu_types[] = {
@@ -673,6 +680,7 @@ static void aspeed_soc_ast2600_class_init(ObjectClass *oc, void *data) sc->memmap = aspeed_soc_ast2600_memmap; sc->num_cpus =2 ; sc->get_irq = aspeed_soc_ast2600_get_irq; + sc->boot_from_emmc = aspeed_soc_ast2600_boot_from_emmc; }static const TypeInfo aspeed_soc_ast2600_types[] = {
hw/arm/aspeed_soc_common.c +7 -0
@@ -134,6 +134,11 @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) } } +static bool aspeed_soc_boot_from_emmc (AspeedSoCState *s) +{ +return false; +} +static Property aspeed_soc_properties[] = {DEFINE_PROP_LINK ("dram" , AspeedSoCState, dram_mr,TYPE_MEMORY_REGION , MemoryRegion *),
@@ -145,9 +150,11 @@ static Property aspeed_soc_properties[] = {static void aspeed_soc_class_init (ObjectClass *oc,void *data) {DeviceClass *dc =DEVICE_CLASS (oc); +AspeedSoCClass *sc =ASPEED_SOC_CLASS (oc); dc->realize = aspeed_soc_realize;device_class_set_props (dc, aspeed_soc_properties); + sc->boot_from_emmc = aspeed_soc_boot_from_emmc; }static const TypeInfo aspeed_soc_types[] = {
Signature · 1 line
2.45.2
PATCH v2 5/8 aspeed: Tune eMMC device properties to reflect HW strapping
In reply to Cédric Le GoaterFrom: Cédric Le Goater <[email protected]>
When the boot-from-eMMC HW strapping bit is set, use the 'boot-config' property to set the boot config register to boot from the first boot area partition of the eMMC device. Also set the boot partition size of the device.
--- hw/arm/aspeed.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-)
hw/arm/aspeed.c +13 -4
@@ -327,7 +327,8 @@ void aspeed_board_init_flashes(AspeedSMCState *s, const char *flashtype, } } -static void sdhci_attach_drive (SDHCIState *sdhci,DriveInfo *dinfo,bool emmc) +static void sdhci_attach_drive (SDHCIState *sdhci,DriveInfo *dinfo,bool emmc, +bool boot_emmc) {DeviceState *card;
@@ -335,6 +336,11 @@ static void sdhci_attach_drive(SDHCIState *sdhci, DriveInfo *dinfo, bool emmc)return ; } card =qdev_new (emmc ?TYPE_EMMC :TYPE_SD_CARD ); +if (emmc) { +qdev_prop_set_uint64 (card,"boot-partition-size" ,1 * MiB); +qdev_prop_set_uint8 (card,"boot-config" , + boot_emmc ?0x1 <<3 :0x0 ); + }qdev_prop_set_drive_err (card,"drive" ,blk_by_legacy_dinfo (dinfo), &error_fatal); qdev_realize_and_unref(card,
@@ -365,6 +371,7 @@ static void aspeed_machine_init(MachineState *machine)AspeedSoCClass *sc;int i;DriveInfo *emmc0 =NULL ; +bool boot_emmc; bmc->soc =ASPEED_SOC (object_new (amc->soc_name));object_property_add_child (OBJECT (machine),"soc" ,OBJECT (bmc->soc));
@@ -437,19 +444,21 @@ static void aspeed_machine_init(MachineState *machine)for (i =0 ; i < bmc->soc->sdhci.num_slots; i++) {sdhci_attach_drive (&bmc->soc->sdhci.slots[i], -drive_get (IF_SD ,0 , i), false); +drive_get (IF_SD ,0 , i), false, false); } + boot_emmc = sc->boot_from_emmc (bmc->soc); +if (bmc->soc->emmc.num_slots) { emmc0 =drive_get (IF_SD ,0 , bmc->soc->sdhci.num_slots); -sdhci_attach_drive (&bmc->soc->emmc.slots[0 ], emmc0, true); +sdhci_attach_drive (&bmc->soc->emmc.slots[0 ], emmc0, true, boot_emmc); }if (!bmc->mmio_exec) {DeviceState *dev =ssi_get_cs (bmc->soc->fmc.spi,0 );BlockBackend *fmc0 = dev ?m25p80_get_blk (dev) :NULL ; -if (fmc0) { +if (fmc0 && !boot_emmc) {uint64_t rom_size =memory_region_size (&bmc->soc->spi_boot);aspeed_install_boot_rom (bmc, fmc0, rom_size); }else if (emmc0) {
Signature · 1 line
2.45.2
Re: [PATCH v2 5/8] aspeed: Tune eMMC device properties to reflect HW strapping
Quoted 7 lines · Cédric Le Goater
From: Cédric Le Goater <[email protected]>
When the boot-from-eMMC HW strapping bit is set, use the 'boot-config' property to set the boot config register to boot from the first boot area partition of the eMMC device. Also set the boot partition size of the device.
Quoted 6 lines
Signed-off-by Cédric Le Goater <[email protected]>Reviewed-by Andrew Jeffery <[email protected]>Tested-by Andrew Jeffery <[email protected]>--- hw/arm/aspeed.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-)
PATCH v2 6/8 aspeed: Add boot-from-eMMC HW strapping bit to rainier-bmc machine
In reply to Cédric Le GoaterFrom: Cédric Le Goater <[email protected]>
This value is taken from a running Rainier machine.
--- hw/arm/aspeed.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
hw/arm/aspeed.c +1 -1
@@ -189,7 +189,7 @@ struct AspeedMachineState {#define TACOMA_BMC_HW_STRAP2 0x00000040/* Rainier hardware value: (QEMU prototype) */ -#define RAINIER_BMC_HW_STRAP1 0x00422016 +#define RAINIER_BMC_HW_STRAP1 (0x00422016 | SCU_AST2600_HW_STRAP_BOOT_SRC_EMMC)#define RAINIER_BMC_HW_STRAP2 0x80000848/* Fuji hardware value */
Signature · 1 line
2.45.2
PATCH v2 7/8 aspeed: Introduce a 'hw_strap1' machine attribute
In reply to Cédric Le GoaterFrom: Cédric Le Goater <[email protected]>
To change default behavior of a machine and boot from eMMC, future changes will add a machine option to let the user configure the boot-from-eMMC HW strapping bit. Add a new machine attribute first.
--- hw/arm/aspeed.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
hw/arm/aspeed.c +5 -1
@@ -46,6 +46,7 @@ struct AspeedMachineState {uint32_t uart_chosen;char *fmc_model;char *spi_model; +uint32_t hw_strap1; };/* On 32-bit hosts, lower RAM to 1G because of the 2047 MB limit */
@@ -393,7 +394,7 @@ static void aspeed_machine_init(MachineState *machine) } } -object_property_set_int (OBJECT (bmc->soc),"hw-strap1" , amc->hw_strap1, +object_property_set_int (OBJECT (bmc->soc),"hw-strap1" , bmc->hw_strap1, &error_abort);object_property_set_int (OBJECT (bmc->soc),"hw-strap2" , amc->hw_strap2, &error_abort);
@@ -1077,7 +1078,10 @@ static void aspeed_set_mmio_exec(Object *obj, bool value, Error **errp)static void aspeed_machine_instance_init (Object *obj) { +AspeedMachineClass *amc =ASPEED_MACHINE_GET_CLASS (obj); +ASPEED_MACHINE (obj)->mmio_exec = false; +ASPEED_MACHINE (obj)->hw_strap1 = amc->hw_strap1; }static char *aspeed_get_fmc_model (Object *obj,Error **errp)
Signature · 1 line
2.45.2
PATCH v2 8/8 aspeed: Introduce a 'boot-emmc' machine option
In reply to Cédric Le GoaterFrom: Cédric Le Goater <[email protected]>
The default behavior of some Aspeed machines is to boot from the eMMC device, like the rainier-bmc. Others like ast2600-evb could also boot from eMMC if the HW strapping boot-from-eMMC bit was set. Add a property to set or unset this bit. This is useful to test boot images.
For now, only activate this property on the ast2600-evb and rainier-bmc machines for which eMMC images are available or can be built.
--- docs/system/arm/aspeed.rst | 2 ++ hw/arm/aspeed.c | 30 ++++++++++++++++++++++++++++++ 2 files changed, 32 insertions(+)
docs/system/arm/aspeed.rst +2 -0
@@ -123,6 +123,8 @@ To boot the machine from the flash image, use an MTD drive : Options specific to Aspeed machines are : + * ``boot-emmc`` to set or unset boot from eMMC (AST2600). + * ``execute-in-place`` which emulates the boot from the CE0 flash device by using the FMC controller to load the instructions, and not simply from RAM. This takes a little longer.
hw/arm/aspeed.c +30 -0
@@ -1178,6 +1178,34 @@ static void aspeed_machine_class_init_cpus_defaults(MachineClass *mc) mc->valid_cpu_types = sc->valid_cpu_types; } +static bool aspeed_machine_ast2600_get_boot_from_emmc (Object *obj,Error **errp) +{ +AspeedMachineState *bmc =ASPEED_MACHINE (obj); + +return !!(bmc->hw_strap1 &SCU_AST2600_HW_STRAP_BOOT_SRC_EMMC ); +} + +static void aspeed_machine_ast2600_set_boot_from_emmc (Object *obj,bool value, +Error **errp) +{ +AspeedMachineState *bmc =ASPEED_MACHINE (obj); + +if (value) { + bmc->hw_strap1 |=SCU_AST2600_HW_STRAP_BOOT_SRC_EMMC ; + }else { + bmc->hw_strap1 &= ~SCU_AST2600_HW_STRAP_BOOT_SRC_EMMC ; + } +} + +static void aspeed_machine_ast2600_class_emmc_init (ObjectClass *oc) +{ +object_class_property_add_bool (oc,"boot-emmc" , + aspeed_machine_ast2600_get_boot_from_emmc, + aspeed_machine_ast2600_set_boot_from_emmc); +object_class_property_set_description (oc,"boot-emmc" , +"Set or unset boot from EMMC" ); +} +static void aspeed_machine_class_init (ObjectClass *oc,void *data) {MachineClass *mc =MACHINE_CLASS (oc);
@@ -1377,6 +1405,7 @@ static void aspeed_machine_ast2600_evb_class_init(ObjectClass *oc, void *data) amc->i2c_init = ast2600_evb_i2c_init; mc->default_ram_size =1 * GiB;aspeed_machine_class_init_cpus_defaults (mc); +aspeed_machine_ast2600_class_emmc_init (oc); };static void aspeed_machine_tacoma_class_init (ObjectClass *oc,void *data)
@@ -1449,6 +1478,7 @@ static void aspeed_machine_rainier_class_init(ObjectClass *oc, void *data) amc->i2c_init = rainier_bmc_i2c_init; mc->default_ram_size =1 * GiB;aspeed_machine_class_init_cpus_defaults (mc); +aspeed_machine_ast2600_class_emmc_init (oc); };#define FUJI_BMC_RAM_SIZE ASPEED_RAM_SIZE(2 * GiB)
Signature · 1 line
2.45.2
Quoted 9 lines · Cédric Le Goater
Cédric Le Goater (8):
aspeed: Change type of eMMC device
aspeed: Load eMMC first boot area as a boot rom aspeed/scu: Add boot-from-eMMC HW strapping bit for AST2600 SoC
aspeed: Introduce a AspeedSoCClass 'boot_from_emmc' handler
aspeed: Tune eMMC device properties to reflect HW strapping
aspeed: Add boot-from-eMMC HW strapping bit to rainier-bmc machine
aspeed: Introduce a 'hw_strap1' machine attribute
aspeed: Introduce a 'boot-emmc' machine option
Series:
Cédric Le Goater
AppliedQuoted 30 lines · Cédric Le Goater
Hello,
This series enables boot from eMMC on the rainier-bmc machine, which is the default behavior and also on the AST2600 EVB using a machine option to change the default.
First 6 patches adjust the machine setup and HW strapping to boot from eMMC, the last 2 are for the AST2600 EVB and are optional.
Thanks,
C.
Changes since v1:
- Rebased on upstream, now that the eMMC device model is available
- Rephrased commit logs
- Fixed SCU prefix of bit definitions
- Tuned 'boot-config' and 'boot-partition-size' eMMC propertiesCédric Le Goater (8):
aspeed: Change type of eMMC device
aspeed: Load eMMC first boot area as a boot rom aspeed/scu: Add boot-from-eMMC HW strapping bit for AST2600 SoC
aspeed: Introduce a AspeedSoCClass 'boot_from_emmc' handler
aspeed: Tune eMMC device properties to reflect HW strapping
aspeed: Add boot-from-eMMC HW strapping bit to rainier-bmc machine
aspeed: Introduce a 'hw_strap1' machine attribute
aspeed: Introduce a 'boot-emmc' machine option
Quoted 8 lines
docs/system/arm/aspeed.rst | 2 ++ include/hw/arm/aspeed_soc.h | 1 + include/hw/misc/aspeed_scu.h | 4 +++ hw/arm/aspeed.c | 62 +++++++++++++++++++++++++++++++----- hw/arm/aspeed_ast2600.c | 8 +++++ hw/arm/aspeed_soc_common.c | 7 ++++ 6 files changed, 76 insertions(+), 8 deletions(-)
Applied to aspeed-next.
Thanks,
C.