Skip to contentSkip to conversation

fstests: btrfs/012: fix a false alert due to socket/pipe files

PATCH Superseded Qu Wenruo 2 participants 2 messages Jul 17, 2024 Btrfs file system

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore

Qu Wenruo

author
#0 lore raw

PATCH 1/1 fstests: btrfs/012: fix a false alert due to socket/pipe files

[BUG]
On my Archlinux VM, the test btrfs/012 always fail with the following output diff:

QA output created by 012
+File /etc/pacman.d/gnupg/S.dirmngr is a socket while file /mnt/scratch/etc/pacman.d/gnupg/S.dirmngr is a socket +File /etc/pacman.d/gnupg/S.gpg-agent is a socket while file /mnt/scratch/etc/pacman.d/gnupg/S.gpg-agent is a socket +File /etc/pacman.d/gnupg/S.gpg-agent.browser is a socket while file /mnt/scratch/etc/pacman.d/gnupg/S.gpg-agent.browser is a socket +File /etc/pacman.d/gnupg/S.gpg-agent.extra is a socket while file /mnt/scratch/etc/pacman.d/gnupg/S.gpg-agent.extra is a socket +File /etc/pacman.d/gnupg/S.gpg-agent.ssh is a socket while file /mnt/scratch/etc/pacman.d/gnupg/S.gpg-agent.ssh is a socket +File /etc/pacman.d/gnupg/S.keyboxd is a socket while file /mnt/scratch/etc/pacman.d/gnupg/S.keyboxd is a socket
...

[CAUSE]
It's a false alerts.

When diff hits two files which are not directory/softlink/regular files (aka, socket/pipe/char/block files), they are all treated as non-comparable.
In that case, diff would just do the above message.

And with Archlinux, pacman (the package manager) maintains its gpg directory inside "/etc/pacman.d/gnupg", and the test case uses "/etc" as the source directory to populate the target ext4 fs.

And the socket files inside "/etc/pacman.d/gnupg" is causing the false alerts.

[FIX]
- Use fsstress to populate the fs
That covers all kind of operations, including creating special files. And fsstress is very reproducible, with the seed saved to the full log, it's much easier to reproduce than using the distro dependent "/etc/" directory.

- Use fssum to save the digest and later verify the contents It does not only verify the contents but also other things like timestamps/xattrs/uid/gid/mode/etc.
And it's more comprehensive than the content oriented diff tool.

---
 tests/btrfs/012     | 29 +++++++++++++++++------------
 tests/btrfs/012.out |  6 ++++++
 2 files changed, 23 insertions(+), 12 deletions(-)
tests/btrfs/012 +17 -12
index a96efeff..d172d93f 100755
@@ -23,13 +23,13 @@ _require_scratch_nocheck
 _require_command "$BTRFS_CONVERT_PROG" btrfs-convert
 _require_command "$MKFS_EXT4_PROG" mkfs.ext4
 _require_command "$E2FSCK_PROG" e2fsck
+_require_fssum
 # ext4 does not support zoned block device
 _require_non_zoned_device "${SCRATCH_DEV}"
 _require_loop
 _require_extra_fs ext4
 
-SOURCE_DIR=/etc
-BASENAME=$(basename $SOURCE_DIR)
+BASENAME="stressdir"
 BLOCK_SIZE=`_get_block_size $TEST_DIR`
 
 # Create & populate an ext4 filesystem
@@ -38,17 +38,21 @@ $MKFS_EXT4_PROG -F -b $BLOCK_SIZE $SCRATCH_DEV > $seqres.full 2>&1 || \
 # Manual mount so we don't use -t btrfs or selinux context
 mount -t ext4 $SCRATCH_DEV $SCRATCH_MNT
 
-_require_fs_space $SCRATCH_MNT $(du -s $SOURCE_DIR | ${AWK_PROG} '{print $1}')
+echo "populating the initial ext fs:" >> $seqres.full
+mkdir "$SCRATCH_MNT/$BASENAME"
+$FSSTRESS_PROG -w -d "$SCRATCH_MNT/$BASENAME" -n 20 -p 500 >> $seqres.full
 
-$TIMEOUT_PROG 10 cp -aRP $SOURCE_DIR $SCRATCH_MNT
+# Create the checksum to verify later.
+$FSSUM_PROG -A -f -w $tmp.original "$SCRATCH_MNT/$BASENAME"
 _scratch_unmount
 
 # Convert it to btrfs, mount it, verify the data
 $BTRFS_CONVERT_PROG $SCRATCH_DEV >> $seqres.full 2>&1 || \
 	_fail "btrfs-convert failed"
 _try_scratch_mount || _fail "Could not mount new btrfs fs"
-# (Ignore the symlinks which may be broken/nonexistent)
-diff --no-dereference -r $SOURCE_DIR $SCRATCH_MNT/$BASENAME/ 2>&1
+
+echo "Checking converted btrfs against the original one:"
+$FSSUM_PROG -r $tmp.original $SCRATCH_MNT/$BASENAME
 
 # Old ext4 image file should exist & be consistent
 $E2FSCK_PROG -fn $SCRATCH_MNT/ext2_saved/image >> $seqres.full 2>&1 || \
@@ -58,13 +62,14 @@ $E2FSCK_PROG -fn $SCRATCH_MNT/ext2_saved/image >> $seqres.full 2>&1 || \
 mkdir -p $SCRATCH_MNT/mnt
 mount -o loop $SCRATCH_MNT/ext2_saved/image $SCRATCH_MNT/mnt || \
 	_fail "could not loop mount saved ext4 image"
-# Ignore the symlinks which may be broken/nonexistent
-diff --no-dereference -r $SOURCE_DIR $SCRATCH_MNT/mnt/$BASENAME/ 2>&1
+
+echo "Checking saved ext2 image against the original one:"
+$FSSUM_PROG -r $tmp.original $SCRATCH_MNT/mnt/$BASENAME
 umount $SCRATCH_MNT/mnt
 
-# Now put some fresh data on the btrfs fs
+echo "genereating new data on the converted btrfs" >> $seqres.full
 mkdir -p $SCRATCH_MNT/new 
-$TIMEOUT_PROG 10 cp -aRP $SOURCE_DIR $SCRATCH_MNT/new
+$FSSTRESS_PROG -w -d "$SCRATCH_MNT/new" -n 20 -p 500 >> $seqres.full
 
 _scratch_unmount
 
@@ -78,8 +83,8 @@ $E2FSCK_PROG -fn $SCRATCH_DEV >> $seqres.full 2>&1 || \
 
 # Mount the un-converted ext4 device & check the contents
 mount -t ext4 $SCRATCH_DEV $SCRATCH_MNT
-# (Ignore the symlinks which may be broken/nonexistent)
-diff --no-dereference -r $SOURCE_DIR $SCRATCH_MNT/$BASENAME/ 2>&1
+echo "Checking rolled back ext2 against the original one:"
+$FSSUM_PROG -r $tmp.original $SCRATCH_MNT/$BASENAME
 
 _scratch_unmount
 
tests/btrfs/012.out +6 -0
index 7aa5ae94..8ea81fad 100644
@@ -1 +1,7 @@
 QA output created by 012
+Checking converted btrfs against the original one:
+OK
+Checking saved ext2 image against the original one:
+OK
+Checking rolled back ext2 against the original one:
+OK
Signature · 1 line
2.45.2
Reviewed-by on v1 1/1
#1 lore raw
Quoted 96 lines · Qu Wenruo

[BUG]
On my Archlinux VM, the test btrfs/012 always fail with the following output diff:

QA output created by 012
+File /etc/pacman.d/gnupg/S.dirmngr is a socket while file /mnt/scratch/etc/pacman.d/gnupg/S.dirmngr is a socket +File /etc/pacman.d/gnupg/S.gpg-agent is a socket while file /mnt/scratch/etc/pacman.d/gnupg/S.gpg-agent is a socket +File /etc/pacman.d/gnupg/S.gpg-agent.browser is a socket while file /mnt/scratch/etc/pacman.d/gnupg/S.gpg-agent.browser is a socket +File /etc/pacman.d/gnupg/S.gpg-agent.extra is a socket while file /mnt/scratch/etc/pacman.d/gnupg/S.gpg-agent.extra is a socket +File /etc/pacman.d/gnupg/S.gpg-agent.ssh is a socket while file /mnt/scratch/etc/pacman.d/gnupg/S.gpg-agent.ssh is a socket +File /etc/pacman.d/gnupg/S.keyboxd is a socket while file /mnt/scratch/etc/pacman.d/gnupg/S.keyboxd is a socket
...

[CAUSE]
It's a false alerts.

When diff hits two files which are not directory/softlink/regular files (aka, socket/pipe/char/block files), they are all treated as non-comparable.
In that case, diff would just do the above message.

And with Archlinux, pacman (the package manager) maintains its gpg directory inside "/etc/pacman.d/gnupg", and the test case uses "/etc" as the source directory to populate the target ext4 fs.

And the socket files inside "/etc/pacman.d/gnupg" is causing the false alerts.

[FIX]
- Use fsstress to populate the fs
That covers all kind of operations, including creating special files. And fsstress is very reproducible, with the seed saved to the full log, it's much easier to reproduce than using the distro dependent "/etc/" directory.

- Use fssum to save the digest and later verify the contents It does not only verify the contents but also other things like timestamps/xattrs/uid/gid/mode/etc.
And it's more comprehensive than the content oriented diff tool.

---
 tests/btrfs/012     | 29 +++++++++++++++++------------
 tests/btrfs/012.out |  6 ++++++
 2 files changed, 23 insertions(+), 12 deletions(-)
tests/btrfs/012 +10 -6
index a96efeff..d172d93f 100755
@@ -23,13 +23,13 @@ _require_scratch_nocheck
 _require_command "$BTRFS_CONVERT_PROG" btrfs-convert
 _require_command "$MKFS_EXT4_PROG" mkfs.ext4
 _require_command "$E2FSCK_PROG" e2fsck
+_require_fssum
 # ext4 does not support zoned block device
 _require_non_zoned_device "${SCRATCH_DEV}"
 _require_loop
 _require_extra_fs ext4
 
-SOURCE_DIR=/etc
-BASENAME=$(basename $SOURCE_DIR)
+BASENAME="stressdir"
 BLOCK_SIZE=`_get_block_size $TEST_DIR`
 
 # Create & populate an ext4 filesystem
@@ -38,17 +38,21 @@ $MKFS_EXT4_PROG -F -b $BLOCK_SIZE $SCRATCH_DEV > $seqres.full 2>&1 || \
 # Manual mount so we don't use -t btrfs or selinux context
 mount -t ext4 $SCRATCH_DEV $SCRATCH_MNT
 
-_require_fs_space $SCRATCH_MNT $(du -s $SOURCE_DIR | ${AWK_PROG} '{print $1}')
+echo "populating the initial ext fs:" >> $seqres.full
+mkdir "$SCRATCH_MNT/$BASENAME"
+$FSSTRESS_PROG -w -d "$SCRATCH_MNT/$BASENAME" -n 20 -p 500 >> $seqres.full
 
-$TIMEOUT_PROG 10 cp -aRP $SOURCE_DIR $SCRATCH_MNT
+# Create the checksum to verify later.
+$FSSUM_PROG -A -f -w $tmp.original "$SCRATCH_MNT/$BASENAME"
 _scratch_unmount
 
 # Convert it to btrfs, mount it, verify the data
 $BTRFS_CONVERT_PROG $SCRATCH_DEV >> $seqres.full 2>&1 || \
        _fail "btrfs-convert failed"
 _try_scratch_mount || _fail "Could not mount new btrfs fs"
-# (Ignore the symlinks which may be broken/nonexistent)
-diff --no-dereference -r $SOURCE_DIR $SCRATCH_MNT/$BASENAME/ 2>&1
+
+echo "Checking converted btrfs against the original one:"
+$FSSUM_PROG -r $tmp.original $SCRATCH_MNT/$BASENAME
 
 # Old ext4 image file should exist & be consistent
 $E2FSCK_PROG -fn $SCRATCH_MNT/ext2_saved/image >> $seqres.full 2>&1 || \
@@ -58,13 +62,14 @@ $E2FSCK_PROG -fn $SCRATCH_MNT/ext2_saved/image >> $seqres.full 2>&1 || \
 mkdir -p $SCRATCH_MNT/mnt
 mount -o loop $SCRATCH_MNT/ext2_saved/image $SCRATCH_MNT/mnt || \

tests/btrfs/012 $E2FSCK_PROG -fn $SCRATCH_MNT/ext2_saved/image >> $seqres.full 2>&1 || \ · line 70

Quoted 10 lines
tests/btrfs/012 +4 -3
        _fail "could not loop mount saved ext4 image"
-# Ignore the symlinks which may be broken/nonexistent
-diff --no-dereference -r $SOURCE_DIR $SCRATCH_MNT/mnt/$BASENAME/ 2>&1
+
+echo "Checking saved ext2 image against the original one:"
+$FSSUM_PROG -r $tmp.original $SCRATCH_MNT/mnt/$BASENAME
 umount $SCRATCH_MNT/mnt
 
-# Now put some fresh data on the btrfs fs
+echo "genereating new data on the converted btrfs" >> $seqres.full

Typo: genereating -> generating

With that fixed:

Thanks.

Quoted 33 lines
tests/btrfs/012 +3 -3
 mkdir -p $SCRATCH_MNT/new
-$TIMEOUT_PROG 10 cp -aRP $SOURCE_DIR $SCRATCH_MNT/new
+$FSSTRESS_PROG -w -d "$SCRATCH_MNT/new" -n 20 -p 500 >> $seqres.full
 
 _scratch_unmount
 
@@ -78,8 +83,8 @@ $E2FSCK_PROG -fn $SCRATCH_DEV >> $seqres.full 2>&1 || \
 
 # Mount the un-converted ext4 device & check the contents
 mount -t ext4 $SCRATCH_DEV $SCRATCH_MNT
-# (Ignore the symlinks which may be broken/nonexistent)
-diff --no-dereference -r $SOURCE_DIR $SCRATCH_MNT/$BASENAME/ 2>&1
+echo "Checking rolled back ext2 against the original one:"
+$FSSUM_PROG -r $tmp.original $SCRATCH_MNT/$BASENAME
 
 _scratch_unmount
 
tests/btrfs/012.out +6 -1
index 7aa5ae94..8ea81fad 100644
@@ -1 +1,7 @@
 QA output created by 012
+Checking converted btrfs against the original one:
+OK
+Checking saved ext2 image against the original one:
+OK
+Checking rolled back ext2 against the original one:
+OK
--

2.45.2