Skip to contentSkip to conversation

drm/panel/simple-edp: Add Samsung ATNA45DC02

RFC In review Rob Clark 3 participants 11 messages Jul 17, 2024 – Jul 18, 2024

Subsystems (5)
lore
Share & tools
lore

Rob Clark

author
#0 lore raw

RFC 1/1 drm/panel/simple-edp: Add Samsung ATNA45DC02

From: Rob Clark <[email protected]>

Just a guess on the panel timings, but they appear to work.

---
This adds the panel I have on my lenovo yoga slim 7x laptop. I couldn't find any datasheet so timings is just a guess. But AFAICT everything works fine.

 drivers/gpu/drm/panel/panel-edp.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/gpu/drm/panel/panel-edp.c +2 -0
index 38e5178f55ac..411b7218af55 100644
@@ -1966,6 +1966,8 @@ static const struct edp_panel_entry edp_panels[] = {
 	EDP_PANEL_ENTRY('S', 'H', 'P', 0x153a, &delay_200_500_e50, "LQ140T1JH01"),
 	EDP_PANEL_ENTRY('S', 'H', 'P', 0x154c, &delay_200_500_p2e100, "LQ116M1JW10"),
 
+	EDP_PANEL_ENTRY('S', 'D', 'C', 0x4189, &delay_100_500_e200, "ATNA45DC02-0"),
+
 	EDP_PANEL_ENTRY('S', 'T', 'A', 0x0100, &delay_100_500_e200, "2081116HHD028001-51D"),
 
 	{ /* sentinal */ }
Signature · 1 line
2.45.2
#1 lore raw
Quoted 9 lines · Rob Clark

From: Rob Clark <[email protected]>

Just a guess on the panel timings, but they appear to work.

---
This adds the panel I have on my lenovo yoga slim 7x laptop. I couldn't find any datasheet so timings is just a guess. But AFAICT everything works fine.

Could you please add EDID to the commit message?

Quoted 20 lines
 drivers/gpu/drm/panel/panel-edp.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/gpu/drm/panel/panel-edp.c +2 -0
index 38e5178f55ac..411b7218af55 100644
@@ -1966,6 +1966,8 @@ static const struct edp_panel_entry edp_panels[] = {
 	EDP_PANEL_ENTRY('S', 'H', 'P', 0x153a, &delay_200_500_e50, "LQ140T1JH01"),
 	EDP_PANEL_ENTRY('S', 'H', 'P', 0x154c, &delay_200_500_p2e100, "LQ116M1JW10"),
 
+	EDP_PANEL_ENTRY('S', 'D', 'C', 0x4189, &delay_100_500_e200, "ATNA45DC02-0"),
+
 	EDP_PANEL_ENTRY('S', 'T', 'A', 0x0100, &delay_100_500_e200, "2081116HHD028001-51D"),
 
 	{ /* sentinal */ }
Signature · 1 line
2.45.2
Signature · 2 lines
With best wishes
Dmitry
reviewer
#2 lore raw
In reply to Rob Clark

Hi,

Quoted 5 lines · Rob Clark

From: Rob Clark <[email protected]>

Just a guess on the panel timings, but they appear to work.

Quoted 8 lines

---
This adds the panel I have on my lenovo yoga slim 7x laptop. I couldn't find any datasheet so timings is just a guess. But AFAICT everything works fine.

 drivers/gpu/drm/panel/panel-edp.c | 2 ++
 1 file changed, 2 insertions(+)

Given that this is a Samsung ATNA<mumble>, is there any chance it's an OLED panel? Should it be supported with the Samsung OLED panel driver like this:

https://lore.kernel.org/r/[email protected]

-Doug

author
#3 lore raw
Quoted 15 lines · Doug Anderson

Hi,

Quoted 11 lines · Rob Clark

From: Rob Clark <[email protected]>

Just a guess on the panel timings, but they appear to work.

---
This adds the panel I have on my lenovo yoga slim 7x laptop. I couldn't find any datasheet so timings is just a guess. But AFAICT everything works fine.

Quoted 8 lines
Quoted 2 lines
 drivers/gpu/drm/panel/panel-edp.c | 2 ++
 1 file changed, 2 insertions(+)

Given that this is a Samsung ATNA<mumble>, is there any chance it's an OLED panel? Should it be supported with the Samsung OLED panel driver like this:

https://lore.kernel.org/r/[email protected]

it is an OLED panel, and I did see that patchset and thought that samsung panel driver would work. But changing the compat string on the yoga dts only gave me a black screen (and I didn't see any of the other mentioned problems with bl control or dpms with panel-edp). So :shrug:? It could be I overlooked something else, but it _seems_ like panel-edp is fine for this panel. Plus, it would avoid awkwardness if it turned out there were other non-samsung 2nd sources, but so far with a sample size of two 100% of these laptops have the same panel ;-)

But that was the reason for posting this as an RFC. I was hoping someone had some hint about where to find datasheets (my google'ing was not successful), etc.

BR,
-R

#4 lore raw
Quoted 35 lines · Rob Clark
Quoted 15 lines · Doug Anderson

Hi,

Quoted 11 lines · Rob Clark

From: Rob Clark <[email protected]>

Just a guess on the panel timings, but they appear to work.

---
This adds the panel I have on my lenovo yoga slim 7x laptop. I couldn't find any datasheet so timings is just a guess. But AFAICT everything works fine.

Quoted 8 lines
Quoted 2 lines
 drivers/gpu/drm/panel/panel-edp.c | 2 ++
 1 file changed, 2 insertions(+)

Given that this is a Samsung ATNA<mumble>, is there any chance it's an OLED panel? Should it be supported with the Samsung OLED panel driver like this:

https://lore.kernel.org/r/[email protected]

it is an OLED panel, and I did see that patchset and thought that samsung panel driver would work. But changing the compat string on the yoga dts only gave me a black screen (and I didn't see any of the other mentioned problems with bl control or dpms with panel-edp). So :shrug:? It could be I overlooked something else, but it _seems_ like panel-edp is fine for this panel. Plus, it would avoid awkwardness if it turned out there were other non-samsung 2nd sources, but so far with a sample size of two 100% of these laptops have the same panel ;-)

Quoted 3 lines

But that was the reason for posting this as an RFC. I was hoping someone had some hint about where to find datasheets (my google'ing was not successful), etc.

Panelook has a datasheet for ATNA45DC01. It's behind a 'register new business email' paywall.

Quoted 3 lines

BR,
-R

Signature · 2 lines
With best wishes
Dmitry
author
#5 lore raw
Quoted 37 lines · Dmitry Baryshkov
Quoted 35 lines · Rob Clark
Quoted 15 lines · Doug Anderson

Hi,

Quoted 11 lines · Rob Clark

From: Rob Clark <[email protected]>

Just a guess on the panel timings, but they appear to work.

---
This adds the panel I have on my lenovo yoga slim 7x laptop. I couldn't find any datasheet so timings is just a guess. But AFAICT everything works fine.

Quoted 8 lines
Quoted 2 lines
 drivers/gpu/drm/panel/panel-edp.c | 2 ++
 1 file changed, 2 insertions(+)

Given that this is a Samsung ATNA<mumble>, is there any chance it's an OLED panel? Should it be supported with the Samsung OLED panel driver like this:

https://lore.kernel.org/r/[email protected]

it is an OLED panel, and I did see that patchset and thought that samsung panel driver would work. But changing the compat string on the yoga dts only gave me a black screen (and I didn't see any of the other mentioned problems with bl control or dpms with panel-edp). So :shrug:? It could be I overlooked something else, but it _seems_ like panel-edp is fine for this panel. Plus, it would avoid awkwardness if it turned out there were other non-samsung 2nd sources, but so far with a sample size of two 100% of these laptops have the same panel ;-)

Quoted 6 lines
Quoted 3 lines

But that was the reason for posting this as an RFC. I was hoping someone had some hint about where to find datasheets (my google'ing was not successful), etc.

Panelook has a datasheet for ATNA45DC01. It's behind a 'register new business email' paywall.

but it does not appear to have ATNA45DC02

fwiw, edid:

----------------
edid-decode (hex):

00 ff ff ff ff ff ff 00 4c 83 89 41 00 00 00 00 00 21 01 04 b5 1f 14 78 02 0b d1 af 51 3d b6 23 0b 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 1e cc 80 50 b0 30 10 74 08 20 88 00 38 c3 10 00 00 1b 1e cc 80 50 b0 30 50 70 08 20 88 00 38 c3 10 00 00 1b 00 00 00 fe 00 53 44 43 20 20 20 20 20 20 20 20 20 20 00 00 00 fe 00 41 54 4e 41 34 35 44 43 30 32 2d 30 20 01 06

02 03 0f 00 e3 05 80 00 e6 06 05 01 8a 6a 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 9c

----------------

Block 0, Base EDID:
EDID Structure Version & Revision: 1.4 Vendor & Product Identification:

    Manufacturer: SDC
    Model: 16777
    Made in: 2023

Basic Display Parameters & Features:
Digital display
Bits per primary color channel: 10
DisplayPort interface
Maximum image size: 31 cm x 20 cm
Gamma: 2.20
Supported color formats: RGB 4:4:4
First detailed timing includes the native pixel format and
preferred refresh rate
Color Characteristics:

    Red  : 0.6835, 0.3164
    Green: 0.2402, 0.7138
    Blue : 0.1396, 0.0439
    White: 0.3125, 0.3291
  Established Timings I & II: none
  Standard Timings: none
  Detailed Timing Descriptors:
    DTD 1:  2944x1840   59.999173 Hz  16:10   172.798 kHz

522.540000 MHz (312 mm x 195 mm)
Hfront 8 Hsync 32 Hback 40 Hpol P
Vfront 8 Vsync 8 Vback 1024 Vpol N
DTD 2: 2944x1840 89.998760 Hz 16:10 172.798 kHz
522.540000 MHz (312 mm x 195 mm)

                 Hfront    8 Hsync  32 Hback   40 Hpol P
                 Vfront    8 Vsync   8 Vback   64 Vpol N

Alphanumeric Data String: 'SDC '
Alphanumeric Data String: 'ATNA45DC02-0 '
Extension blocks: 1
Checksum: 0x06

----------------

Block 1, CTA-861 Extension Block:
Revision: 3
Native detailed modes: 0
Colorimetry Data Block:

    BT2020RGB

HDR Static Metadata Data Block:
Electro optical transfer functions:
Traditional gamma - SDR luminance range
SMPTE ST2084
Supported static metadata descriptors:
Static metadata type 1
Desired content max luminance: 138 (993.486 cd/m^2) Desired content max frame-average luminance: 106 (496.743 cd/m^2) Desired content min luminance: 2 (0.001 cd/m^2)
Checksum: 0x9c Unused space in Extension Block: 112 bytes
----------------

BR,
-R

Quoted 7 lines
Quoted 3 lines

BR,
-R

--
With best wishes
Dmitry

reviewer
#6 lore raw
In reply to Rob Clark

Hi,

Quoted 26 lines · Rob Clark
Quoted 15 lines · Doug Anderson

Hi,

Quoted 11 lines · Rob Clark

From: Rob Clark <[email protected]>

Just a guess on the panel timings, but they appear to work.

---
This adds the panel I have on my lenovo yoga slim 7x laptop. I couldn't find any datasheet so timings is just a guess. But AFAICT everything works fine.

Quoted 8 lines
Quoted 2 lines
 drivers/gpu/drm/panel/panel-edp.c | 2 ++
 1 file changed, 2 insertions(+)

Given that this is a Samsung ATNA<mumble>, is there any chance it's an OLED panel? Should it be supported with the Samsung OLED panel driver like this:

https://lore.kernel.org/r/[email protected]

Quoted 8 lines

it is an OLED panel, and I did see that patchset and thought that samsung panel driver would work. But changing the compat string on the yoga dts only gave me a black screen (and I didn't see any of the other mentioned problems with bl control or dpms with panel-edp). So :shrug:? It could be I overlooked something else, but it _seems_ like panel-edp is fine for this panel. Plus, it would avoid awkwardness if it turned out there were other non-samsung 2nd sources, but so far with a sample size of two 100% of these laptops have the same panel

Hmm, OK. One question for you: are you using the "enable" GPIO in panel-edp? IMO the code handling that GPIO in panel-edp is somewhat dodgy, but it predates my deeper involvement with panels. I've never seen an eDP panel that could use panel-edp where it was actually required--every instance where someone thought it was required was better modeled by using that GPIO as the backlight enable. On the other hand, the "enable" GPIO in the Samsung OLED panel driver came straight from the panel datasheet and it makes sense for it to be in the panel driver since the backlight is handled straight by the panel...

In any case, I guess if things are working it doesn't really hurt to take it in panel-edp for now...

Quoted 3 lines

But that was the reason for posting this as an RFC. I was hoping someone had some hint about where to find datasheets (my google'ing was not successful), etc.

I don't personally have any hints.

-Doug

author
#7 lore raw
Quoted 39 lines · Doug Anderson

Hi,

Quoted 26 lines · Rob Clark
Quoted 15 lines · Doug Anderson

Hi,

Quoted 11 lines · Rob Clark

From: Rob Clark <[email protected]>

Just a guess on the panel timings, but they appear to work.

---
This adds the panel I have on my lenovo yoga slim 7x laptop. I couldn't find any datasheet so timings is just a guess. But AFAICT everything works fine.

Quoted 8 lines
Quoted 2 lines
 drivers/gpu/drm/panel/panel-edp.c | 2 ++
 1 file changed, 2 insertions(+)

Given that this is a Samsung ATNA<mumble>, is there any chance it's an OLED panel? Should it be supported with the Samsung OLED panel driver like this:

https://lore.kernel.org/r/[email protected]

Quoted 8 lines

it is an OLED panel, and I did see that patchset and thought that samsung panel driver would work. But changing the compat string on the yoga dts only gave me a black screen (and I didn't see any of the other mentioned problems with bl control or dpms with panel-edp). So :shrug:? It could be I overlooked something else, but it _seems_ like panel-edp is fine for this panel. Plus, it would avoid awkwardness if it turned out there were other non-samsung 2nd sources, but so far with a sample size of two 100% of these laptops have the same panel

Quoted 10 lines

Hmm, OK. One question for you: are you using the "enable" GPIO in panel-edp? IMO the code handling that GPIO in panel-edp is somewhat dodgy, but it predates my deeper involvement with panels. I've never seen an eDP panel that could use panel-edp where it was actually required--every instance where someone thought it was required was better modeled by using that GPIO as the backlight enable. On the other hand, the "enable" GPIO in the Samsung OLED panel driver came straight from the panel datasheet and it makes sense for it to be in the panel driver since the backlight is handled straight by the panel...

hmm, at least current dts doesn't have an enable gpio. Which could be why panel-samsung-atna33xc20 wasn't working.

It is entirely possible we are relying on something left on by the bootloader.

Quoted 3 lines

In any case, I guess if things are working it doesn't really hurt to take it in panel-edp for now...

I wonder if using compatible="edp-panel" everywhere isn't a great idea if we want to switch drivers later. But I guess that is already water under the bridge (so to speak)

BR,
-R

Quoted 8 lines
Quoted 3 lines

But that was the reason for posting this as an RFC. I was hoping someone had some hint about where to find datasheets (my google'ing was not successful), etc.

I don't personally have any hints.

-Doug

reviewer
#8 lore raw

Hi,

Quoted 52 lines · Rob Clark
Quoted 39 lines · Doug Anderson

Hi,

Quoted 26 lines · Rob Clark
Quoted 15 lines · Doug Anderson

Hi,

Quoted 11 lines · Rob Clark

From: Rob Clark <[email protected]>

Just a guess on the panel timings, but they appear to work.

---
This adds the panel I have on my lenovo yoga slim 7x laptop. I couldn't find any datasheet so timings is just a guess. But AFAICT everything works fine.

Quoted 8 lines
Quoted 2 lines
 drivers/gpu/drm/panel/panel-edp.c | 2 ++
 1 file changed, 2 insertions(+)

Given that this is a Samsung ATNA<mumble>, is there any chance it's an OLED panel? Should it be supported with the Samsung OLED panel driver like this:

https://lore.kernel.org/r/[email protected]

Quoted 8 lines

it is an OLED panel, and I did see that patchset and thought that samsung panel driver would work. But changing the compat string on the yoga dts only gave me a black screen (and I didn't see any of the other mentioned problems with bl control or dpms with panel-edp). So :shrug:? It could be I overlooked something else, but it _seems_ like panel-edp is fine for this panel. Plus, it would avoid awkwardness if it turned out there were other non-samsung 2nd sources, but so far with a sample size of two 100% of these laptops have the same panel

Quoted 10 lines

Hmm, OK. One question for you: are you using the "enable" GPIO in panel-edp? IMO the code handling that GPIO in panel-edp is somewhat dodgy, but it predates my deeper involvement with panels. I've never seen an eDP panel that could use panel-edp where it was actually required--every instance where someone thought it was required was better modeled by using that GPIO as the backlight enable. On the other hand, the "enable" GPIO in the Samsung OLED panel driver came straight from the panel datasheet and it makes sense for it to be in the panel driver since the backlight is handled straight by the panel...

Quoted 4 lines

hmm, at least current dts doesn't have an enable gpio. Which could be why panel-samsung-atna33xc20 wasn't working.

It is entirely possible we are relying on something left on by the bootloader.

That would be my best guess. Is there any way for you to find out if there's an enable GPIO?

Quoted 7 lines
Quoted 3 lines

In any case, I guess if things are working it doesn't really hurt to take it in panel-edp for now...

I wonder if using compatible="edp-panel" everywhere isn't a great idea if we want to switch drivers later. But I guess that is already water under the bridge (so to speak)

For panels that aren't OLED it's all very standard and we're kinda forced to use something generic since manufacturers want lots of 2nd (and 3rd and 4th and ...) sourcing. As far as I've been able to tell you can't do 2nd sourcing between OLED panels and other panels since the wires hooked up to the panels are a little different for the OLED panels and the power sequencing is a bit different. It would also be pretty obvious to an end user if some of their devices had an OLED panel and some didn't. I'm not aware of OLED panels other than the Samsung ones, but I haven't done any real research here...

-Doug

author
#9 lore raw
Quoted 56 lines · Doug Anderson

Hi,

Quoted 52 lines · Rob Clark
Quoted 49 lines · Doug Anderson

Hi,

Quoted 26 lines · Rob Clark
Quoted 15 lines · Doug Anderson

Hi,

Quoted 11 lines · Rob Clark

From: Rob Clark <[email protected]>

Just a guess on the panel timings, but they appear to work.

---
This adds the panel I have on my lenovo yoga slim 7x laptop. I couldn't find any datasheet so timings is just a guess. But AFAICT everything works fine.

Quoted 8 lines
Quoted 2 lines
 drivers/gpu/drm/panel/panel-edp.c | 2 ++
 1 file changed, 2 insertions(+)

Given that this is a Samsung ATNA<mumble>, is there any chance it's an OLED panel? Should it be supported with the Samsung OLED panel driver like this:

https://lore.kernel.org/r/[email protected]

Quoted 8 lines

it is an OLED panel, and I did see that patchset and thought that samsung panel driver would work. But changing the compat string on the yoga dts only gave me a black screen (and I didn't see any of the other mentioned problems with bl control or dpms with panel-edp). So :shrug:? It could be I overlooked something else, but it _seems_ like panel-edp is fine for this panel. Plus, it would avoid awkwardness if it turned out there were other non-samsung 2nd sources, but so far with a sample size of two 100% of these laptops have the same panel

Hmm, OK. One question for you: are you using the "enable" GPIO in panel-edp? IMO the code handling that GPIO in panel-edp is somewhat dodgy, but it predates my deeper involvement with panels. I've never seen an eDP panel that could use panel-edp where it was actually required--every instance where someone thought it was required was better modeled by using that GPIO as the backlight enable. On the other hand, the "enable" GPIO in the Samsung OLED panel driver came straight from the panel datasheet and it makes sense for it to be in the panel driver since the backlight is handled straight by the panel...

Quoted 7 lines
Quoted 4 lines

hmm, at least current dts doesn't have an enable gpio. Which could be why panel-samsung-atna33xc20 wasn't working.

It is entirely possible we are relying on something left on by the bootloader.

That would be my best guess. Is there any way for you to find out if there's an enable GPIO?

presumably it would be in the ACPI dump (which I've not much of a clue what I'm looking for there)

BR,
-R

Quoted 21 lines
Quoted 8 lines
Quoted 4 lines

In any case, I guess if things are working it doesn't really hurt to take it in panel-edp for now...

I wonder if using compatible="edp-panel" everywhere isn't a great idea if we want to switch drivers later. But I guess that is already water under the bridge (so to speak)

For panels that aren't OLED it's all very standard and we're kinda forced to use something generic since manufacturers want lots of 2nd (and 3rd and 4th and ...) sourcing. As far as I've been able to tell you can't do 2nd sourcing between OLED panels and other panels since the wires hooked up to the panels are a little different for the OLED panels and the power sequencing is a bit different. It would also be pretty obvious to an end user if some of their devices had an OLED panel and some didn't. I'm not aware of OLED panels other than the Samsung ones, but I haven't done any real research here...

-Doug

author
#10 lore raw
Quoted 61 lines · Rob Clark
Quoted 59 lines · Doug Anderson

Hi,

Quoted 55 lines · Rob Clark
Quoted 39 lines · Doug Anderson

Hi,

Quoted 26 lines · Rob Clark
Quoted 15 lines · Doug Anderson

Hi,

Quoted 11 lines · Rob Clark

From: Rob Clark <[email protected]>

Just a guess on the panel timings, but they appear to work.

---
This adds the panel I have on my lenovo yoga slim 7x laptop. I couldn't find any datasheet so timings is just a guess. But AFAICT everything works fine.

Quoted 8 lines
Quoted 2 lines
 drivers/gpu/drm/panel/panel-edp.c | 2 ++
 1 file changed, 2 insertions(+)

Given that this is a Samsung ATNA<mumble>, is there any chance it's an OLED panel? Should it be supported with the Samsung OLED panel driver like this:

https://lore.kernel.org/r/[email protected]

Quoted 8 lines

it is an OLED panel, and I did see that patchset and thought that samsung panel driver would work. But changing the compat string on the yoga dts only gave me a black screen (and I didn't see any of the other mentioned problems with bl control or dpms with panel-edp). So :shrug:? It could be I overlooked something else, but it _seems_ like panel-edp is fine for this panel. Plus, it would avoid awkwardness if it turned out there were other non-samsung 2nd sources, but so far with a sample size of two 100% of these laptops have the same panel

Quoted 10 lines

Hmm, OK. One question for you: are you using the "enable" GPIO in panel-edp? IMO the code handling that GPIO in panel-edp is somewhat dodgy, but it predates my deeper involvement with panels. I've never seen an eDP panel that could use panel-edp where it was actually required--every instance where someone thought it was required was better modeled by using that GPIO as the backlight enable. On the other hand, the "enable" GPIO in the Samsung OLED panel driver came straight from the panel datasheet and it makes sense for it to be in the panel driver since the backlight is handled straight by the panel...

hmm, at least current dts doesn't have an enable gpio. Which could be why panel-samsung-atna33xc20 wasn't working.

Quoted 8 lines
Quoted 4 lines
Quoted 1 line

It is entirely possible we are relying on something left on by the bootloader.

That would be my best guess. Is there any way for you to find out if there's an enable GPIO?

presumably it would be in the ACPI dump (which I've not much of a clue what I'm looking for there)

Ok, turns out it is wired up the same way as on the crd.. if I copy those then panel-samsung-atna33xc20 is working

BR,
-R

Quoted 21 lines
Quoted 21 lines
Quoted 8 lines
Quoted 4 lines

In any case, I guess if things are working it doesn't really hurt to take it in panel-edp for now...

I wonder if using compatible="edp-panel" everywhere isn't a great idea if we want to switch drivers later. But I guess that is already water under the bridge (so to speak)

For panels that aren't OLED it's all very standard and we're kinda forced to use something generic since manufacturers want lots of 2nd (and 3rd and 4th and ...) sourcing. As far as I've been able to tell you can't do 2nd sourcing between OLED panels and other panels since the wires hooked up to the panels are a little different for the OLED panels and the power sequencing is a bit different. It would also be pretty obvious to an end user if some of their devices had an OLED panel and some didn't. I'm not aware of OLED panels other than the Samsung ones, but I haven't done any real research here...

-Doug